est series grain temperature and level monitoring system...

Aplus Finetek Sensor, Inc.

ISO-9001:2015 certified

EST Series Grain Temperature and Level Monitoring System

More than just another level measurement company ….

Monitoring and controlling grain temperature in a storage system is a key factor in optimizing grain quality. Grain in storage can suffer from the harmful effects of mold growth, disease and pest infestation, the result of which is degradation of grain quality and value. If these conditions occur, the temperature within the grain at storage at those points will increase. If precise temperature measurement within the grain storage bins is made on a continuous basis, then grain conditioning systems can be efficiently employed to eradicate the source of the problems. The EST grain temperature monitoring system can accomplish this grain temperature measurement and can also measure grain levels within the bins, thereby not only instantly tracking and recording grain conditions but also providing inventory measurement information for a complete grain storage monitoring system.

EST sensing cables utilize 1-wire digital temperature sensors which, combined with the Aplus Finetek HubLink data transmission hardware, simplifies and lowers the cost of installation by using RS485 MODBUS digital communication for transmitting information back to your control room or office where you can be viewing all information from the MMS-TLA materials management software. Grain temperature and level measurements from a virtually unlimited number of bins is thereby readily available to assist you in managing your grain quality and value.

Introduction

1

System Architecture

EST110 Multipoint Grain Storage

Temperature Sensing Cable

EST120 Multipoint Grain StorageTemperature & Level Sensing Cable

MMS-TLA Grain Monitoring

Materials Management Software

IPC Industrial Computer

HubLink Data Transmitters

Wireless System Architecture

Applications

EST Cable Guide

RCU2 Remote Control Unit

Order Information

Content

2

3

5

7

9

11

13

15

17

21

23

25

System Architecture

Monitor Changing Level and Temperature of Grain in Storage

JMW104-MHubLink 1-wire

wireless

JMW101-MHubLink RS485

wireless

JMW10-CX Coordinator

IPC with MMS-TLA

EST110Cables

EST110Cables

EST110Cables EST110

CablesEST120Cables

EST120Cables

Wireless

(refer to page 15 for more information on wireless components)

3

RS485 RS485

JMH104-MHubLink 1-wire

JMH101-MHubLink RS485

(MODBUS)

IPC with

MMS-TLA

EST110Cables

EST110Cables

EST110Cables EST110

CablesEST120Cables

EST120Cables

Hardwired

4

Monitor Changing Level and Temperature of Grain in Storage

5: 28.5BC

4: 28.0BC

3: 27.5BC

2: 35.4BC

1: 27.5BC

The EST110 is a multipoint temperature sensing cable that can measure the temperature of grain at different points along its cable in realtime, allowing you to monitor grain condition to ensure optimal grain quality and value. The EST110 uses 1-wire digital sensors. These sensors are accurate, fast and allow for a simpler and significantly lower installation cost than traditional thermocouple cables.

EST110 cables connect to a 1-wire HubLink data transmitter that typically is located near the bin or silo where the cables are installed. The connection between each EST110 and HubLink is accomplished using only a single cable with just one pair of wires, even though up to 30 temperature sensors may exist within each EST110 cable. The HubLink transmits the temperature measurement data to your monitoring system, the Aplus Finetek MMS-TLA software or the Aplus Finetek RCU2 wall mounted control and display unit using RS485 (MODBUS) serial communications.

Features

5

EST110 Multipoint Grain Storage Temperature Sensing Cable

Reinforced steel cable design effectively provides long life.Multiple point temperature measurement, up to thirty (30) 1-wire digital sensors per cable with custom spacing.Detect “hot spot” temperature rises that can indicate pest infestation, disease or mold growth allowing you to respond quickly to eliminate trouble.Provide realtime grain storage temperature monitoring for long-term grain storage facilities, grain processors and feed mills.

Introduction

6

Measurement range

Resolution

Accuracy

Maximum cable length

Sensor separation distance

Cable materials

Tensile strength load

Sensor quantity per cable

IP Rating

Specifications

14⁰F~185⁰F (-10⁰C~85⁰C)

0.1 CB

±0.5⁰C

>30m (98.4ft)

30 sensors maximum

PE (polyethylene) jacketed cable, 19:7 steel reinforced POM (Polyoxymethylene) center

11,000lbf (5,000kgf )

Customized per cable

IP67

Dimensions

2.70 (68.5)

2.60 (66)

L

øø1.26

( 32)

ø0.55 (ø14)

Inch (mm)

Operating temperature range -40⁰F~185⁰F (-40⁰C~85⁰C)

7

EST120 Multipoint Grain Storage Temperature & Level Sensing Cable

5: 28.5BC

4: 28.0BC

3: 27.5BC

2: 35.4BC

1: 27.5BC

0%

50%

100%

Features

Unique simultaneous monitoring of grain level and temperature.Reinforced steel cable design effectively provides long life.Multiple point temperature measurement, up to thirty (30) 1-wire digital sensors per cable with custom spacing.Detect “hot spot” temperature rises that may indicate pest infestation or mold growth to allow for quick response to eliminate trouble.Provide realtime grain storage temperature for long-term grain storage facilities, grain processors and feed mills.Easy to setup and calibrate level measurement function using any two points.RS485 (MODBUS) digital communications easily integrates into your existing system while simplifying and reducing overall system installation costs.

Introduction

The EST120 combine the multipoint temperature sensing of the EST110 cable with continuous level measurement. A single entry point into the bin or silo can now provide both grain inventory (level) and temperature monitoring. The EST120 uses the same 1-wire digital sensors as the EST110 temperature monitoring cable, which are accurate, fast and allow for a vastly simpler and lower cost installation than traditional thermocouple cables. The EST120 cables also provide grain level measurement using reliable continuous capacitance technology. EST120 units feature a direct RS485 (MODBUS) serial digital communication link to transmit measured data directly to your control room. The EST120 temperature/level sensing cables simplify installation, saving time and reducing installation costs.

8

Specifications Dimensions

L

5.79 (147)

5.80 (147.3)

ø0.55 (ø14)

1/2"G

1-1/4"G (PF)

Power supply

Measurement range

Resolution

9~30VDC

14⁰F~185⁰F (-10⁰C~85⁰C)

0.1⁰C

±0.5⁰C

>98.4ft (30m)

Customized per cable

30 sensors maximum

± 1% F.S.

RS485 (MODBUS)9600~57600 bps baud rate

Accuracy

Maximum cable length

Sensor quantity per cable

Sensor separation distance

Non-linearity (level)

Output interface

Diecast Aluminum (powder coated)

PE (polyethylene) jacketed cable, inner ring copper wire

IP 67

1/2"G threaded

Enclosure

Cable materials

IP Rating

Conduit entrance

Tensile strength load 11,000lbf (5,000kgf )

Level: £ 1 secTemperature: £ 1 sec/node

Sampling speed

Inch (mm)

-40⁰F~185⁰F (-40⁰C~85⁰C)Operating temperature range

Introduction

The MMS-TLA is a grain monitoring materials management software package for PC’s that can replace your current manual record keeping of both grain temperatures and grain level within your storage bins and silos. The MMS-TLA software is designed to interface to the EST110 and EST120 grain monitoring cables through the use of RS485 (MODBUS) digital communications. The MMS can be applied in a wide range of industries such as rice milling, flour production, feed milling, food production and in a range of grain processing facilities. MMS-TLA software monitors grain temperature changes within each silo in realtime to detect abnormal temperatures and prevent grain degradation and spoilage. The software can also be used to improve the management of grain inventory to increase profitability.

9

MMS-TLA Grain Monitoring Materials Management Software

Easy to setup, view data graphically and numericallyExport data reports for analysis and record keepingAlarm notification by emailSetup items include: Bin type, name and number, sensing cable model and number, HubLink general settings, alarm setup for high and low temperature, serial port setup, and alarm notification parametersDisplay items including: Bin identification, grain %, level, weight, min/max temperature measured, current temperature of each sensor in each cable, temperature changes for each cableAlarms: grain high/low level, high/low temperature, communication trouble, displayed and email notificationReports: Historical data can be exported to text and Excel formats

CPU: P4, 1GHz and above

Memory: 512MB+

Operating System: MS 2000 and above

Hard Drive Space: 1GB+

Serial Port: USB or RS232

System RequirementsPC Software (MMS-TLA)

Features

10

From the Home Page the operator can view the graphic depiction of up to four (4) silos and their Information including: Silo Number and Name, Sensing Cable Locations (indicated by a circle; maximum nineteen sensing cables per silo), Material % Full and Weight, High/Low Temperature, Access to Current Temperatures Graphs and Information, etc.

Home Page History Query

Device Parameter Setup Alarm Setup

Account Setup Silo Parameter Setup

Historical measurement information can be viewed, exported and printed for further review and analysis. The History Table can be established by entering the start and ending times for the historical query along with the silo number.

Setting up each sensing cable in a given silo is easy. Press the “Setting” menu button to access the Device Setting area. At this menu each sensing cable can be setup, including the setting of the Cable Type, Silo Number and Name, MODBUS ID, COM Port, High/Low Temperature and Level Alarms and Timeout period, etc. The table at the top of this page display, to the right of the silo graphic, will show the setup parameters for each sensing cable in the silo along with their location number.

Temperature and level measurement alarms can be set for each sensing cable and silo. This setup, refer to Device Parameter Setup, allows for visual Home Page display, as well as remote alarm notification. Remote alarm notification is sent by email. Entering the Alarm Setup section is done by pressing the Alarm menu button in the software. Setup of the remote alarm notification includes entering the email addresses to send alarm notification to, and setting the email server designation and the time interval for sending notifications of any alarms that exist.

Pressing the “Setting” menu button allows the operator to access the Silo Setting area. You can select the Silo Type, Silo Dimensions, Material Density, etc. for each silo.

Multiple users can be allowed to access the MMS-TLA software locally or remotely. Account Setup allows you to control the type of account each user has, which then sets the permissions for each user along with what they can do. There are two categories of users, Administrator and Operator. Administrators have full access and can setup permissions in Account Setup, while Operator accounts are limited in what they can do, being primarily limited to viewing information and historical data.

11

IPC Industrial Computer

Specifications

Model Name YAEC-6613

Chassis

Color Black + Silve

Dimensions (WxDxH)

7.61” x 7.87” x 2.24”(193.4mm x 200mm x 57mm)

System Fan None

Chassis Construction

Aluminum alloy

Motherboard

CPU Intel® D2550, 1.86GHz, Dual-Core Processor

Chipset Intel® NM10

System Memory On-board DDR3 4GB

Storage Hard Drive 1 x 2.5” SATA HDD Bay

I/O interfaces

USB 2.0 6

Ethernet 2 x RJ-45 Realtek 8111E GbE LAN

RS-232 6 COM: 6 x DB-9

RS-422/485 2 x RS422/485 x DB-9

Display 1 x VGA

Resolution VGA: Up to 2048 x 1536 @ 75Hz

Audio 1 x Line-out, 1 x Mic-in

Expansions PCIe Mini 1 x Full Size (supports mSATA)1 x Half Size

Power

Input 9~36VDC

[email protected]

(Intel® ATOM™ D2550 with 4GB DDR3 memory)

Reliability

Mounting VESA 100, DIN-Rail

Operating Temperature

-4⁰F~158⁰F (-20⁰C~70⁰C) with air flow (SSD)5%~95% non-condensing

Operating Shock Half-sine wave shock 5G, 11ms, 3 shocks per axis

Operating Vibration

MIL-STD-810F 514.5C-2 (with SSD)

Weight (Net/Gross)

4.84lb (2.2kg) / 6lb (3kg)

Safety / EMC CE/FCC

OS Supported OSMicrosoft® Windows 10 and 7,

Microsoft® Windows® XP Embedded

Features

CPU: Intel Dual Core D2550, 1.86GHz

COM Ports: 6 x RS232, 2 x RS232/422/485, 6 x USB 2.0

Network Interface: 2 x high-speed LAN

IPC (Industrial PC)

Fanless -20°C~70°C

RS-232PCIe Mini Expansion

12

Front View Rear View

Dimension

VGA 4 x USB 2.0

Power 2 x LAN 2 x RS-232/422/485

2 x RS-232 Audio

4 x RS-232 8 x RS-232 2 x USB 2.0

9-36V DC-in

CMOS CLRReset

AT/ATX mode

7.61 (193.4) 2.24 (57)

7.87

(20

0)

4-M4

4-M3

5.99 (152.2)

3.94 (100)

3.94

(10

0)

2.95

(75

)

Inch (mm)

The HubLink 1-Wire is a data transmitter for use with EST110 grain temperature monitoring cables, which use 1-wire digital

temperature sensors. Up to four (4) EST110 cables can be connected to a single HubLink 1-Wire data transmitter. Each cable

connects to the HubLink using only a single pair of wires, vastly simplifying and reducing the cost of overall installation. This is a

key feature of the EST grain temperature monitoring system. The HubLink 1-Wire data transmitter converts all 1-wire

temperature sensing data to an RS485 MODBUS serial link for all EST cables connected to the HubLink, further reducing

overall installation cost, improving overall system reliability and simplifying connection to the remotely located graphical

interface software, the MMS-TLA.

13

HubLink Data Transmitters

Introduction

HubLink 1-Wire Unit = Inch (mm)

Hardwired JMH104-M

Wireless JMW104-M

5.6 (142)

2.17 (55) 7.95 (202)

Specifications

10~30VDC

Four (4) max.; EST110 1-wire grain temperature sensing cable

-40⁰F~176⁰F (-40⁰C~80⁰C)

9600~115200

Ambient temperature

Sensor input

Enclosure

Digital communication link

RS485 baud rate

Power supply

Diecast aluminum (powder coated); IP67 rating

RS485 (MODBUS)

14

Introduction

HubLink RS485 MODBUS Unit = Inch (mm)

Hardwired JMH101-M

Wireless JMW101-M

Power supply

Ambient temperature

Sensor input

Power supply output

Output

RS485 baud rate

Specifications

10~30Vdc

-40⁰F~176⁰F (-40⁰C~80⁰C)

Four (4) max. sets of RS485 MODBUS devices (EST120 1-wire grain temperature/level sensor cable & HubLink 1-Wire data transmitters)

RS485 MODBUS

10~30VDC; 400mA per channel w/ 2A input supply

9600~115200

Electrostatic protection

Enclosure Diecast aluminum (powder coated); IP67 rating

IEC61000-4-2 ESD 8kV air / 4kV contact

The HubLink RS485 MODBUS is a data transmitter for use with EST120 grain temperature/level monitoring

cables and HubLink 1-Wire transmitters. Up to four (4) EST120 cables and HubLink 1-Wire data transmitters

can be connected to a single HubLink RS485 MODBUS data transmitter. This assists with simplifying and

reducing the cost of overall system installation. The HubLink RS485 MODBUS data transmitter also provides

the required 24VDC power supply for the EST120 level/temperature cables.

5.6 (142)

2.17 (55) 7.95 (202)

HubLink wireless data transmitters help reduce cost of cable and overcome obstacles to hardwiring.

JMW104-MHubLink 1-wire

wireless

JMW101-MHubLink RS485

wireless

IPC with MMS-TLA

Specifications

Number of channels

Channel spacing

Date transmission rate

Transmission range

Sensitivity

16

5 MHz

250 kbps

-100dBm (PER 1%)* £

1.24 miles (2km) line-of-sight

Operating frequencyRange 2405 MHz ~ 2480 MHz

Wireless Communication

Input communication HubLink RS485: RS485

HubLink 1-wire: 1-wire signal

Outputcommunication

RS485 MODBUS

RS-485 baud rate

Operating temp.

Static electricityprotection

Power Input

Enclosure

9600/19200/38400

57600/115200

-40F~176BF(-40BC~80BC)

IEC61000-4-2 ESD 8kV Air

4kV contact

Diecast aluminum (powder coated); IP67 rating

10~30VDC

(Router)

(Coordinator)

Wireless Components

15

Example Architecture – HubLink 1-Wire & HubLink RS485 Wireless

Antennae 2.4GHz 7dBi Omni Antenna

*Package Error Rate

Router The Router increases the wireless transmission distance of a HubLink 1-

Wire or HubLink RS485 Data Transmitter when the wireless signal strength is

not adequate to reliably reach the Coordinator. The Router receives data

from the HubLink wireless transmitters, enhances and forwards the wireless

signal to the Coordinator.

RS-485 baud rate

Operating temp.

Static electricity protection

Power Input

Dimension

Specifications

9600/19200/38400

57600/115200

-40F~176BF(-40BC~80BC)

IEC61000-4-2 ESD 8kV Air

4kV contact

146 X 66 X 30 mm

10~30VDC

Coordinator Router /

16

5 MHz

250 kbps

-100dBm (PER 1%)* £

3.5mm SMA Female

1.24 miles (2km) line-of-sight

Operating frequencyRange 2405 MHz ~ 2480 MHz

CoordinatorThe Coordinator manages all communications between multiple HubLink 1-

Wire and HubLink RS485 Data Transmitters, Routers and the MMS-TLA

software via an RS485 communication interface from the Coordinator to the

IPC.

Wireless Communication

16

Number of channels

Channel spacing

Date transmission rate

Transmission range

Sensitivity

Antenna specification

Enclosure Diecast aluminum (powder coated); IP67 rating

Outputcommunication

RS485 MODBUS

*Package Error Rate

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

17 18 19 20 21 22

23 24 25 26 27 28

Applications

1

2

3

4

5

6

7

RS485

RS485

RS485

RS485

RS485

RS485

1-wire*4 1-wire*4 1-wire*4

1-wire*4 1-wire*4 1-wire*4 1-wire*4

RS485

17

Example 1: EST110 Application (shown hardwired)

28 grain silos, each with one one (1) EST110 temperature monitoring cable

Seven (7) HubLink 1-WireData Transmitters IPC with MMS-TLA

1 2 3 4 5 6 7 8

1 2

RS485

RS485 RS485

RS485

18

Example 2: EST120 Application (shown hardwired)

8 grain silos, each with one (1) EST120 temperature/level monitoring cable

Two (2) HubLink RS485 MODBUSData Transmitters IPC with MMS-TLA

RS485

1 2

1 HubLink 1-Wire

HubLink RS485 MODBUSData Transmitters

HubLink 1-WireData Transmitters

RS485

RS485 RS485

RS485

19

Two (2) grain silos, each with three (3) EST110 temperature monitoring cables and one (1) EST120 temperature/level cable

Example 3: EST110 and EST120 Application (shown hardwired)

EST110

EST110

EST110

EST120 EST120

EST110

EST110

EST110

EST110 and EST120 Application

IPC with MMS-TLA

20

EST120 HubLink RS485 MODBUS HubLink 1-Wire

EST120 EST110

21

Sensing Cable Quantity / Positioning

Silo center

First ring

Second ring Third ring

If the silo diameter is ³ 26ft (8m), please ensure you follow the recommendations for sensing cable

quantity and positioning as shown in the table on page 22 in order to ensure that the complete sensing

cable system will be able to adequately monitor changing grain temperatures within the silo.

22

13 (4) 1 1

20 (6)

26 (8)

33 (10)

39 (12)

46 (14)

53 (16)

59 (18)

66 (20)

72 (22)

79 (24)

85 (26)

92 (28)

1

3

3

4

6

7

8

11

12

13

17

19

1

0

0

1

1

1

1

0

0

0

1

1

7.5 (2.3)

8.2(2.5)

10.8 (3.3)

15.4 (4.7)

18.4 (5.6)

19.7(6.0)

8.2 (2.5)

9.2(2.8)

9.8(3.0)

17.4(5.3)

21.7(6.6)

3

3

3

5

6

7

3

3

3

6

6

120

120

120

72

60

51

120

120

120

60

60

24.6 (7.5)

26.9 (8.2)

29.5 (9)

34.8 (10.6)

34.8 (10.6)

8

9

10

10

12

45

40

36

36

30

98 (30)

118 (36)

22

29

0

0

8.5(2.6)

8.2(2.5)

3

3

120

120

24.6 (7.5)

27.9 (8.5)

7

10

51

36

42.0 (12.8)

47.6 (14.5)

12

16

30

22.5

131 (40) 34 118.4(5.6) 5 72

37.1 (11.3) 10 36

55.8 (17.0) 18 20

Silo

Diameter

Ft (m)

Quantity

Sensing

Cables

Silo

Center Distance from Center

Ft (m)

Interval Angle (⁰)

First Ring Second Ring Third Ring

QuantityDistance

from CenterFt (m)


QuantityDistance

from CenterFt (m)


Quantity


The RCU2 is a remote control unit designed for the small and medium EST grain

temperature and level monitoring system where a central PC system is not available or

wanted. The total number of sensing cables that can interface with the RCU2 is four (4), of

the same type either EST110 or EST120, via the RS485 interface within the RCU2. The unit

is easy and convenient to use with its touch screen graphic display.

Features

Easy-to-use, intuitive, touch screen operation

Graphic display shows representation of up to four (4) silos

RS485 MODBUS interface to sensing cables

Connect with either EST110 temperature or EST120 temperature/level

monitoring sensing cables

Can provide power supply (24VDC) to HubLink data transmitter

Introduction

23

Specifications

Power supply

Display

Touch panel

Voltage output

Memory

100~200VAC, 50/60Hz

7 inch (800 x 480) TFT LCD

Resistive Touch

24VDC (1A maximum)

64MB RAM (90 day storage); 128MB memory storage

24

Enclosure

Enclosure rating

Plastic; 11.7” x 11” x 6.2” (296mm x 281mm x 158mm)

IP65

Operating temperature

Standard: 32⁰F~122⁰F (0⁰C~50⁰C); Low Temperature: -40⁰F~122⁰F (-40⁰C~50⁰C)

Maximum sensing cable input Four (4) EST110 or Four (4) EST120 Sensing Cables

I/O interface COM1 – RS232; COM2 – RS485 MODBUS

Order Information

25

:E 1-1/2":F 2":G 2-1/2":H 3"

:I 4":J 5":K 6"

2M: 5kg/cm

2N : 10kg/cm O : 150Lbs P : 300Lbs

00: None88: Hanging Hook (ETB-0030 hanging hook included)99: Adjustable Angle Mount (ETB-0040 adjustable angle mount included)SS: Special

Process Connection

Length (Unit: m)*

Sensor Interval*

Sensor Quantity

05: One sensor every 0.5m

10: One sensor every 1m (std.)



95: One sensor every 9.5m (max.)

Size Specification

Flange

01: 1PCS02: 2PCS

30: 30PCS(max.)

-EST110 - 0 3 00 01 3 0 -

01: 1m (minimum)02: 2m03: 3m

35: 35m (maximum)

* Round up to whole number for part number,

example: if actual length required is 25.3m,

use 26 in part numbering for length.

* Example: separation interval of 1.82m should

use code 18 and specify the exact distance in

the description.

26

Size Specification

Flange

Screw

:E 1-1/2":F 2":G 2-1/2":H 3"

:I 4":J 5":K 6"

2M: 5kg/cm

2N : 10kg/cm O : 150Lbs P : 300Lbs

3: 1-1/4"

R : PF(G)U : NPT

Sensor Interval*


10: One sensor every 1m (std.)



95: One sensor every 9.5m (max.)

Process Connection

Length (Unit: m)*

-EST120 -

01: 1m (minimum)02: 2m03: 3m

30: 30m(max.)

M 3 0F 01

Sensor Quantity

3 0 -

01: 1PCS02: 2PCS

30: 30PCS(max.)

88: Hanging Hook (ETB-0031 hanging hook included)99: Adjustable Angle Mount (ETB-0041 adjustable angle mount included)SS: Special

* Round up to whole number for part number,

example: if actual length required is 25.3m,

use 26 in part numbering for length.

* Example: separation interval of 1.82m should

use code 18 and specify the exact distance in

the description.

27

Monitoring System

- Includes MMS-TLA PC software for materials management

- Includes RS485/USB convertor (YTXPUSB485-T)

ETB-0003 IPC (Industrial PC) w/ Windows XP (English);

HubLink

JMH104-M HubLink 1-Wire Data Transmitter (for hardwired system)

JMW104-M HubLink 1-Wire Wireless Data Transmitter

JMH101-M HubLink RS485 MODBUS Data Transmitter (for hardwired system)

JMW101-M HubLink RS485 MODBUS Wireless Data Transmitter

JMW10-CX Wireless Coordinator

JMW10-RX Wireless Router

Communication system0: RS485 MODBUS Hardwired

1: Wireless

RCU-2 0-


Operating temperature0: Standard 32⁰F~122⁰F (0⁰C~50⁰C)

1: Low Temperature -40⁰F~122⁰F (-40⁰C~50⁰C)

Sensing cable type0: EST110 Multipoint Grain Storage Temperature

1: EST120 Multipoint Grain Storage Temperature & Level

Order Information

Accessories

28

ETB-0031

ETB-0030

ETB-0041

ETB-0040

Electrical InsulatorEBA-1403

EST120 Hanging hook

EST110 Hanging hook

EST120 Adjustable Angle Mount

EST110 Adjustable Angle Mount

WeightETB-0050Material: Trivalent chromiumWeight: 5kg

Aplus Finetek Sensor, Inc.

Represented by:

08-EST-B0-AP, 07/25/2016

Global Network

Taiwan

China

U.S.

Germany

U.S.

Singapore

Indonesia

Taiwan

TEL: 886-2-2269-6789FAX: 886-2-2268-6682EMAIL: [email protected]

FineTek Co., Ltd.

China

TEL: 86-21-6490-7260FAX: 86-21-6490-7276EMAIL: [email protected]

Fine automation Co., Ltd.

Singapore

TEL: 65-6452-6340FAX: 65-6734-1878EMAIL: [email protected]

IndonesiaFineTek Co., Ltd TEL: 62-(021)-2923-1688FAX: 62-(021)-2923-1988EMAIL: [email protected]

FineTek Pte Ltd.

California, U.S.

TEL: 1-909-598-2488 FAX: 1-909 598-3188EMAIL: [email protected]

Aplus Finetek Sensor Inc.GermanyFineTek GmbHFrankfurter Str. 62, OG D-65428 Ruesselsheim, GermanyTEL: 49-(0)6142-17608-0FAX: 49-(0)6142-17608-20EMAIL: [email protected]

Asia North Amerca Europe

Illinois, U.S.

TEL: 1-815-632-3132 FAX: 1-815-716-8464EMAIL: [email protected]

Aplus Finetek Sensor Inc.

est series grain temperature and level monitoring system...

Documents