establishing jaw relation
TRANSCRIPT
-
7/31/2019 Establishing Jaw Relation
1/58
-
7/31/2019 Establishing Jaw Relation
2/58
Establishing jaw relation andocclusal relationships for
removable partial denture
BYDR SALAH HEGAZY
-
7/31/2019 Establishing Jaw Relation
3/58
::
-
7/31/2019 Establishing Jaw Relation
4/58
The desired occlusal scheme of the
removable partial denture may vary fromthat of a complete denture( bilateralbalanced occlusion) to that of a fixedbridge.
The decision is made upon: A) The number and distribution of
remaining teeth.
B ) The existing periodontal conditions C) The type of occlusion in the opposing
arch.
-
7/31/2019 Establishing Jaw Relation
5/58
Establishing the jaw relation is necessaryif the opposing casts cannot be accuratelyhand articulated or if the denture is being
constructed at the centric jaw relationposition. It must be needed following thecorrected cast impression procedurebecause the lack of posterior occlusion in
class I & II partial edentulous arches.
When occlusal relationships areestablished to position the artificial teethcorrectly, the vertical and horizontalcomponents of the jaw relation are equallyimportant.
-
7/31/2019 Establishing Jaw Relation
6/58
Components: V.R.& H.R .
Methods ofEstablishing occlusal relationship:
1.Function generating path tech.
2.Articulator or static Tech.;
a. Direct opposition of casts( handarticulation)
b. Occlusal relations using occlusal rims
c. Jaw relation record by using frame workd. Complete upper and class I lower RPD
-
7/31/2019 Establishing Jaw Relation
7/58
-
7/31/2019 Establishing Jaw Relation
8/58
Adequate toothnumber vs.
Inadequate tooth
number InterocclusalRecord to support
the bite registrationmaterials
-
7/31/2019 Establishing Jaw Relation
9/58
-
7/31/2019 Establishing Jaw Relation
10/58
-
7/31/2019 Establishing Jaw Relation
11/58
[C] Establishing vertical dimension of
occlusion:
Indications:
1- complete denture opposed RPD.
2- lost all posterior teeth in one or both
arches.
Procedure:
by measuring V.D of rest and then
subtracting 3 mm (amount of free-way
space).
-
7/31/2019 Establishing Jaw Relation
12/58
I -Vertical jaw relation:
[A] Vertical dimension:
Two vertical dimensions are recognized for each patient:
-Vertical dimension of rest is taken when the patient is inan upright position and is completely at rest.
-Vertical dimension of occlusion V.D is measured whenthe teeth contact in maximum intercuspal relationship.
- Free-way space the space between the teeth when themandible is in its resting stated, it's about 2-4 mm.
-
7/31/2019 Establishing Jaw Relation
13/58
[B] Altering the existing vertical dimension ofocclusion:
- The prosthesis should be constructed at
vertical dimension of occlusion, if the
natural teeth in opposing arch contact incentric occlusion.
-Changing the V.D of occlusion should be
considered only if the vertical dimension of
occlusion has been diminished.
-
7/31/2019 Establishing Jaw Relation
14/58
Signs and symptoms of diminished V.Dof occlusion:
Symptoms such as:1- Severe tooth wear
2- Tired aching muscle.
3-Unexplained pain in the head and neck.
4-Appearance of premature aging caused by
a shortened nose-chin distance.
Objective sign indicates loss of V.D in
excessive free-way space (i.e. more
than 4 mm).
-
7/31/2019 Establishing Jaw Relation
15/58
Signs:
1- If the occlusal surfaces of the teeth have beenworn excessively, it will not indicate that the V.D ofocclusion is lessened because a compensatingeruption of the teeth usually maintains the properV.D.
2- Also extreme anterior vertical overlap in which themandibular teeth strike the soft tissue of thepalate.
In these cases, no treatment needed to correct the
V.D of occlusion without more definite proof thatthe loss of V.D has occurred.
Cephalometric examination confirming migrationof condyles and greater than 4 mm free-way
space indicate loss of V.D.
-
7/31/2019 Establishing Jaw Relation
16/58
Prosthetic management for increase theexisting V.D:
-Increase in interocclusal height must beaccomplished with a temporary removableappliance (occlusal overlay). It's normally moreconvenient to construct the appliance to cover themaxillary teeth (to avoid interference with thetongue movement if cover mandibular teeth).
-All remaining teeth in both arches must becontacted by the prosthesis otherwise:
1- Teeth which do not contact by appliance tend to
erupt.2- If sufficient number of remaining teeth do not
contact, the appliance, the supporting teeth will besubmerged to an infraocclusal position .
-
7/31/2019 Establishing Jaw Relation
17/58
-Encroaching (obliteration) the free-way
space by prosthesis the person may
refuse to wear the appliance.
Or if he wears the appliance either
depressing the supporting teeth to
reestablish the free-way space.
or destruction of supporting alveolar
bone with loss of teeth.
-
7/31/2019 Establishing Jaw Relation
18/58
-Temporary appliance is used several months(usually 3 months) followed by permanent RPD.
-When permanent treatment is begun, it must be
planned so that all occlusal-dimension restoringprosthesis, fixed and removable are inserted atthe same time. Crown and fixed partial dentureshould never be inserted before the construction
of RPD to avoid destruction of the supportingtissue of teeth that maintain the V.D by crown orfixed restoration.
-
7/31/2019 Establishing Jaw Relation
19/58
II - Horizontal jaw relation:
Two horizontal relationships of the mandible tomaxilla are important in the occlusion of partialdenture.
Centric relation bone to bone relation.
It's repeatable, reliable position. Centric occlusion tooth-to-tooth relation.
It's learned habitual closure.
In more than 90% of all persons, centric relation
and centric occlusion do not coincide. Centricocclusion was always be anterior 1 to 2 mm tocentric relation.
-
7/31/2019 Establishing Jaw Relation
20/58
Factors influencing development of occlusion:
Several factors influence the occlusalscheme for RPD purposed by Hanau known
as Hanau quint:
Condylar guidance X incisal guidance=
Compensatory curves X Inclination of
occlusal plane X Cusp Height
-
7/31/2019 Establishing Jaw Relation
21/58
In complete denture, compensating curve,plane of orientation, incisal guidance and
height of cusp may be changed. The only
factor that cannot be altered is thecondylar guidance; therefore development
of occlusal scheme for C.D is easily
developed (i.e. anatomic or non-anatomic
teeth may be used).
-
7/31/2019 Establishing Jaw Relation
22/58
In partial denture, prominence ofcompensating curve, plane of orientation
and incisal guidance and height of cusp
are determined by the presence of naturalteeth; therefore the form of artificial teeth
is detected by the natural one.
-
7/31/2019 Establishing Jaw Relation
23/58
Methods of establishing occlusion:
There are basically two methods of
establishing the occlusion of RPD:
Functionally generated path technique.
The articulator or static technique.
-
7/31/2019 Establishing Jaw Relation
24/58
A ] Functionally generated path technique:
.All functional movements of the mandible are recordedon hard wax occlusion rim. The record represents thepathways of each tooth opposed to edentulous space.
The artificial tooth is positioned and formed to make
harmonious contact with its antagonist at all times
1. Acrylic record base is attached to framework then
construct hard inlay wax (purple) occlusion rim.
2. If occlusal contact between opposing natural teeth fail
to maintain the vertical dimension of occlusion
record this V.D (V.D of rest 3 mm).
-
7/31/2019 Establishing Jaw Relation
25/58
3. Occlusion rim is constructed so it's slightly
higher (keep the remaining teeth apart about
0.5 mm) and wider than the width of opposingtooth to record full range of functional
motion.
4. Patient continuously wear the framework and
occlusion rim for 24 hours except during
eating and drinking.
5. The framework with function generating path
occlusion rim (wax pattern) reset in mastercast.
6. The wax pattern is poured in hard stone to
produce stone record.
-
7/31/2019 Establishing Jaw Relation
26/58
7. The stone record and master cast with
function generating path occlusion rim ismounted on the articulator, the incisal guidepin is opened 1 mm before the artificial teethare positioned. The increase in V.D will return
to normal by selecting grinding the artificialteeth. Using water-soluble Prussian blue dyepaint the surface of stone record.
8. Selective grinding is made on articulator in
open and close movement only (i.e. articulatoris locked in centric relation). The articulator isnot moved into protrusive and lateral becausethese positions are incorporated in thepathway.
-
7/31/2019 Establishing Jaw Relation
27/58
Limitations to use the generatingpath:
The occlusion in one of the arches must be completed
before the generated path can be developed (one PD
constructed before the other can be made).
PD against complete denture Here complete the
partial denture by articulator method and functional
generating path for CD.
-
7/31/2019 Establishing Jaw Relation
28/58
Disadvantages:
Movement of distal extension base carrying the occlusion
rim is possible produce inaccurate pattern of path.
The pattern (path) developed in the wax is accurate forwax only but not for food stuffs (as masticatory cycledepend on the type and texture of food).
Advantages:
Elimination of the use of tracing device.
Elimination of the use of face-bow transfer
B ] A i l h i
-
7/31/2019 Establishing Jaw Relation
29/58
B ] Articulator technique:
a.Direct apposition of casts [Hand articulation]:
When hand articulation is used, tooth positioncan be determined by occluding the modeltogether (i.e. when sufficient opposing teethremain in contact to make the existing jawrelationship.
It should be used when only a few teeth are to bereplaced.
The occluded casts are secured together with
wooden sticks and sticky wax and mountedarbitrarily on an articulator.
No face bow is used.
-
7/31/2019 Establishing Jaw Relation
30/58
b. Occlusal relation using Occlusion rim:
The mandibular distal extensionocclusion rim may be constructed so that
the height will be even with cusps of theadjacent abutment tooth anteriorly andposteriorly to the height of theretromolar pad.
-
7/31/2019 Establishing Jaw Relation
31/58
Clinical procedure:
[A] When the vertical dimension is maintained byocclusal contact of several standing teeth in bothjaws and the tooth position cannot be determinedby occluding the models together centric
occlusion has been selected as the proper jawrelation.
1. The height of the occlusion rims must be
adjusted so that no contact takes placebetween opposing occlusion rims or betweenrim and opposing teeth. A space ofapproximately 1 mm is desired.
-
7/31/2019 Establishing Jaw Relation
32/58
2- If opposing occlusion rim is to be used one ofthese, usually mandibular rim is adjusted to
establish an ideal occlusal plane [because
the landmarks that are normally present.
The posterior height at of retromolar padand anterior height to the height of
remaining teeth] and the opposing maxillary
rim adjusted to short of contact.
-
7/31/2019 Establishing Jaw Relation
33/58
3. If opposing occlusion are to be used. The
recording medium is placed on the mandibular
rim. The maxillary rim should be indexed withseveral v-shaped notches.
4. The surface of occlusion rim that support the
recording medium should be roughened to
ensure that the record will remain attached toit.
5. If any portion of the wax occlusion rim shows
through the recording medium indicates thatincorrect jaw relation as any force occur in the
occlusion rim, the distal extension base will
depress the soft tissue beneath the base
relief the portion of the occlusion rim and the
-
7/31/2019 Establishing Jaw Relation
34/58
Project 1:
Record Bases & Wax Rim
Clinical Implications:
To evaluate and record the proper VDOand CR position when the remaining
dentition is not adequate enough to
support the bite registration material
-
7/31/2019 Establishing Jaw Relation
35/58
Model #1
Model #3*
-
7/31/2019 Establishing Jaw Relation
36/58
Use your eyes to estimate the correct
path of insertion. Then use small amount
of wax to block out the undercut.
Mi i
-
7/31/2019 Establishing Jaw Relation
37/58
Why?
To obtain a stable and
retentive recordbase and
yet avoid the damage
on the cast
Minimum
Wax Block Out
Where?Teeth: marginal gingiva,proximal surfaces, and
embrasures
Soft tissue: gross undercut
-
7/31/2019 Establishing Jaw Relation
38/58
Apply the separatingmedium
Wait for the first coat air dry, then apply
the second coat.
-
7/31/2019 Establishing Jaw Relation
39/58
-
7/31/2019 Establishing Jaw Relation
40/58
Round, smooth,
and polish the
record base
Before adding the
wax rim, roughen
the acrylic surface
for mechanical
retention
Record base extension: 2 3 mm short of vestibule
-
7/31/2019 Establishing Jaw Relation
41/58
Record base extension: 2-3 mm short of vestibule
Record base extension: 2-3 mm short of vestibule
-
7/31/2019 Establishing Jaw Relation
42/58
Record base extension: 2-3 mm short of vestibule
R
e
Record base extension next to
the teeth:
Avoid the extend toward to
the tooth
-
7/31/2019 Establishing Jaw Relation
43/58
Record base:
2-3 mm thick
Do not overextend
-
7/31/2019 Establishing Jaw Relation
44/58
Extend the record base onto
the proximal, palatal/lingual
surfaces of the teeth to enhance
the retention, stability, and
support of the record base
-
7/31/2019 Establishing Jaw Relation
45/58
Keep the space for the
bite registration material
-
7/31/2019 Establishing Jaw Relation
46/58
Bite registration materials:
ZOE bite registration paste
Wax
Compound
Silicone
-
7/31/2019 Establishing Jaw Relation
47/58
Selectively adding
the wire clasps can
improve the
retention & stability
of the record basefor accurate jaw
record
d b
-
7/31/2019 Establishing Jaw Relation
48/58
Record base & wax
rim
Stable Good support
Rigid
Comfort
Accurate
interocclusalrecord
-
7/31/2019 Establishing Jaw Relation
49/58
-
7/31/2019 Establishing Jaw Relation
50/58
-
7/31/2019 Establishing Jaw Relation
51/58
-
7/31/2019 Establishing Jaw Relation
52/58
c Ja relation record made b sing the
-
7/31/2019 Establishing Jaw Relation
53/58
c. Jaw relation record made by using theframework:
It's used if tooth position cannot be determinedby hand articulation.
If jaw relation appointment follow the
construction of an altered cast.1. It's advisable before removing the framework toexamine the relationship of the framework toteeth on the cast. Be sure that the occlusal rests
and other components of the framework did notmove during pouring the cast. If any change inposition of the framework was evident repeatthe alter impression.
-
7/31/2019 Establishing Jaw Relation
54/58
2. Acrylic tray should be removed from theframework by heating the tray material over a
burner until it starts to smoke and then pulling itby pliers.
Making the record base:
1. If the edentulous space is not too long hard
base plate wax may be used as a record base [itshould be formed over the acrylic resin retentionmetal in contact with edentulous ridge]
Autopolymerized acrylic resin should be used toconstruct the record base if the edentulous ridgeis long or if the interarch space is restricted.
-
7/31/2019 Establishing Jaw Relation
55/58
2. Soft tissue undercuts on the edentulous ridgemust be blocked with baseplate wax to avoid
damaging of the master cast when the acrylicrecord base is used.
2. Tissue stop under acrylic resin retention minor
connector will not contact cast following makingof altered cast to prevent framework frombeing moved during record base construction orprevent the framework from being disturbed
during packing of denture base, bead of autopolymerizing resin is placed between tissue stopand stone ridge and allowed to set before therecord base is adapted.
-
7/31/2019 Establishing Jaw Relation
56/58
Complete upper and class I lower RPD:
The vertical dimension of occlusion is determined by restV.D 3mm.
Establishing the centric relation.
Centric recording medium for seating the occlusion rims
together.
The upper cast mount of the articulator using face-bow and
the lower are using centric interocclusal record.
-
7/31/2019 Establishing Jaw Relation
57/58
Protrusive interocclusal record is used to adjust
horizontal condylar guidance.
Lateral condylar guidance is adjusted by the
following Hanau equation:
L= H/8 +12
The teeth are set in balancing occlusion.
-
7/31/2019 Establishing Jaw Relation
58/58