ethernet gersis gmbh ds

ISCOM1005M Cost-effecient Multi-dwelling Access Switch

Raisecom Technology Co., Ltd.

ISCOM1005M Cost-effecient Multi-dwelling Access

Ethernet SwitchForwarding mode Store-and-forward

Max frame size 1536Bytes

Storm control Broadcast storm fltering

Port loopback detection

In case a port is connected to a loop circuit, the port will be shut down by Switch automatically; when the loop circuit unchains, the port will recover automatically. This function is confgurable.

MAC address table IEEE802.1D standard address learning1K MAC address

Flow control IEEE802.3x in full duplex, back pressure in half duplex

VLAN Port-based VLANIEEE802.1Q, 32 VLAN ID

Confguration Menu Operation Interface

Help language English/Chinese

Management Local Console Management through Menu Operation Interface

Performance Switching fabric 1Gbps

Capacity 64KB Switch buffer1K MAC address

Management port

1 console (RJ45)

Serial port confguration

9600bps/8bit/none parity/1 stop bit/none fow control

Port specifcation

10BaseT (RJ45, Cat3/Cat4/Cat5 UTP)100BaseT (RJ45, Cat5 UTP)

Fixed port 5 (10/100BaseT)

Indicators Power SupplySystem (fashing)

Indicators for each port

FDXLNK/ACT 10/100M

Dimension 139.5(W)*77(D)*28(H)mm

Weight 0.8 KG

Power supply 100-240VAC，50-60Hz

Power consumption

≤ 5W (at max load)

Working ambience

Temp: 0~50 centigradeRH: 5~95% non-condensing

Storage ambience

Temp: -25~85 centigradeRH: 20~90% non-condensing

ISCOM1005M is Raisecom new cost-effcient manageable layer-2 Ethernet Switch for multi-dwelling access, deploying at the forefront of service delivery for the simple reason that more customers can be reached with a relatively smaller investment. ISCOM1005M implements with industry leading functionalities such as

auto-MDI/MDIX, IEEE802.3x fow control, port-based VLAN, IEEE802.1q VLAN, Loop back detection, broadcast packet fltering and etc. Enabling a cost-effcient, intelligent and manageable multiple dwelling access.

Specifcation

Feature

Datasheet

ComplianceStandards & protocols

IEEE802.3 10Base-TIEEE 802.3u 100Base-TX IEEE802.3x

Ordering InformationPart number Description

ISCOM1005M/AC Manageable access Ethernet switch, 5*10/100M Ethernet electrical ports, 115V or 230V AC

Bossestasse 9, 06484 Quedlinburg,Deutschland

Andreas GeroldTel.: + 49(0) 3946 - 91 99 90Fax: + 49(0) 3946 - 91 99 91Mobil: + 49(0) 171 - 74 262 76E-mail: [email protected]

Michael LitvinkoTel.: + 375 17 259 11 03Fax: + 375 17 259 11 18Mobil: + 375 297 600 103E-mail: [email protected]

www.sis-group.com

ISCOM1008E Cost-effecient Multi-dwelling Access Switch


ISCOM1008E Cost-effecient Multi-dwelling Access

Ethernet Switch

Forwarding mode Store-and-forward







VLAN Port-based VLANIEEE802.1Q, 4K VLAN ID




QoS Up to 4 output queuesSupport IEEE802.1p and DSCP classifcationPort-based CoS

Queue schedule algorithm

Strict Priority (SP), Weighted Round Robin (WRR)

Performance Switching fabric 1.6Gbps


Management port

1 console (RJ45)



Port specifcation





FDXLNK/ACT 10/100M

Dimension 260(W)*116(D)*38(H)mm

Weight 0.9 KG

Power supply AC: 90~264V, 47~63Hz 0.3A(120V), 0.15A(230V)

Power consumption


Working ambience


Storage ambience


ISCOM1008E is Raisecom new cost-effcient manageable layer-2 Ethernet Switch for multi-dwelling access, deploying at the forefront of service delivery for the simple reason that more customers can be reached with a relatively smaller investment. ISCOM1008E implements with industry leading functionalities such as auto-MDI/MDIX, IEEE802.3x fow control, port-based VLAN, IEEE802.1q VLAN, Loop

back detection, broadcast packet fltering and etc. Differentiated services can be supported through port-based CoS, layer-2 and layer-3 classifcation to four queues forwarding according to IEEE802.1p, DSCP and IP Precedence schemes, enabling a cost-effcient, intelligent and manageable multiple dwelling access.

SpecifcationFeature

Datasheet


IEEE802.3x full duplex on 10BaseT, 100BaseTXIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTX


ISCOM1008E/AC Cost-efficient multi-dwelling access switch with 8*10/100BaseT interfaces, AC power supply




www.sis-group.com




Ethernet Switch



Port rate limiting Based on ingress and egress of each port, 8 levels: (128K, 256K, 512K, 1M, 2M, 4M, 8M and 100M)




Multicast IGMP Snooping



VLAN Port-based VLANIEEE802.1Q, 4K VLAN ID









Management port

1 console (RJ45)



Port specifcation





FDXLNK/ACT 10/100M

Dimension 440(W)*120(D)*43.6(H)mm

Weight 1.6KG


Power consumption


Working ambience


Storage ambience


ISCOM1016E is Raisecom new cost-effcient manageable layer-2 Ethernet Switch for multi-dwelling access, deploying at the forefront of service delivery for the simple reason that more customers can be reached with a relatively smaller investment. ISCOM1016E implements with industry leading functionalities such as port-based rate-limiting, IEEE802.3x fow control, port-based VLAN, IEEE802.1q

VLAN, Loop back detection, IGMP Snooping, broadcast packet fltering and etc. Differentiated services can be supported through port-based CoS, layer-2 and layer-3 classifcation to four queues forwarding according to IEEE802.1p, DSCP and IP Precedence schemes, enabling a cost-effcient, intelligent and manageable multiple dwelling access.

SpecifcationFeature

Datasheet








www.sis-group.com




Ethernet Switch



Port rate limiting Based on ingress and egress of each port, 8 levels: (128K, 256K, 512K, 1M, 2M, 4M, 8M and 100M)




Multicast IGMP Snooping



VLAN Port-based VLANIEEE802.1Q, 32 VLAN ID





Link aggregation Support 6 trunk groupsThere can be 4 ports in each trunk group

Mirror Support one-to-multi port mirrorSupport separately mirroring of ingress traffc and egress traffc



Management port

1 console (RJ45)



Port specifcation





FDXLNK/ACT 10/100M


Weight 1.6KG


Power consumption


Working ambience


Storage ambience


ISCOM1024E is Raisecom new cost-effcient manageable layer-2 Ethernet Switch for multi-dwelling access, deploying at the forefront of service delivery for the simple reason that more customers can be reached with a relatively smaller investment. ISCOM1024E implements with industry leading functionalities such as port-based rate-limiting, IEEE802.3x fow control, port-based VLAN, IEEE802.1q

VLAN, Loop back detection, IGMP Snooping, broadcast packet fltering and etc. Differentiated services can be supported through port-based CoS, layer-2 and layer-3 classifcation to four queues forwarding according to IEEE802.1p, DSCP and IP Precedence schemes, enabling a cost-effcient, intelligent and manageable multiple dwelling access.

SpecifcationFeature

Datasheet








www.sis-group.com

ISCOM2008 Managed L2 Ethernet Switch


ISCOM2008 Managed L2 Access Ethernet Switch

Layer 2 Switching


Port rate limiting CIR, CBS, EIR, EBS per UNI

Traffc controll IEEE 802.3x full-duplex fow controlstorm control of broadcast, multicast and DLFHOL

Port Features Port isolationPort loopback test

Multicast IGMP Snooping V1/V2/V3Multicast VLAN Registration (MVR)

Spanning tree STP and RSTP

Link aggregation Up to 4 truck groups, 8*100M ports in each trunkSupport load-sharing based on source MAC address, destination MAC address, and source + destination MAC address policies

Port Mirroring Port-to-Multiport morroring, separate mirroring of ingress and egress traffcSupport blocking of non-mirroring port traffcConfgure respectively egress/ingress sampling interval at 1~1023 packetIngress/egress traffc mirroring based on source/destination MAC address

MAC address table IEEE802.1D standard address learningMAC address learning function can be enabled/disable on each port4K MAC address, 100 static MAC addressSupport MAC address clear/search functionThe number of dynamic learned MAC address can be limited on per port

VLAN IEEE802.1Q, 4K active VLAN

QoS

QoS - 4 output queues- Queue schedule algorithm: SP, WRR and SP + WRR- Ingress policing is provided based on CoS, , DSCP, and port.

Security

Security policy Device management access ACLUser classifcation and user name/password protectionSupport AAA & Radius & TACACS+ *authenticationSupport MAC address and port bindingPrevent DoS attackPort isolation and protection portPort-based IEEE802.1X authenticationSecure Shell (ssh * )

Management


Capacity 16MB SDRAM2MB fash256KB Switch buffer4K MAC address255 IGMP groups

Max frame size 1536 Bytes

Management port

1 console (RJ45)



Port specifcation





FDXLNK/ACT 10/100M


Weight 0.9KG


Power consumption

≤ 4.5W (at max load)

Working ambience


Storage ambience


Safety compliance

CE markingFCC Class A

ISCOM2000 series is Raisecom new generation managed Ethernet Switch in terms of cost-effciency, outstanding performance, and high dependability. It implements wire-speed store and forward as well as powerful means of network management features. ISCOM2000

series, including ISCOM2008, ISCOM2016, and ISCOM2026, is especially suitable for residential community, offce building, campus, and enterprise end-users, with provisioning of Fast Ethernet access service for desktop and working groups.

Specifcation

Feature

Datasheet




www.sis-group.com


Management and maintenance

Support CLI (Command Line Interface) confguration modeRemote maintenance through TelnetSupport Confguration via the console portSupport Local/remote confguration via TelnetSupport System confguration with SNMP v1/2/3Support RMON (Remote Monitoring) v1, 2, 3 and 9 groups of MIBSupport WEB management system *Bridge MIB (RFC1493)Support Hierarchical alarmsSupport System logPing

Cluster management

Raisecom Neighbour Discover Protocol (RNDP)Raisecom Topology Discover Protocol (RTDP)Raisecom Cluster Management Protocol (RCMP)Raisecom cluster network management program

OAM

IEEE802.3ah OAM discovery

IEEE802.1ag * - Continuity Check Messages- Traceroute Messages- Loopback Messages

Other features

Default password restoration

Support

Standards & protocols

IEEE802.3ahIEEE802.1xIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTXIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2008/AC ISCOM2008 Manageable intelligent aggregation layer-2 switch with 8x10/100M and AC power supply

* Optional feature




www.sis-group.com

ISCOM2009 & ISCOM2009A Managed

L2 Ethernet Switch





Port rate limiting Based on ingress and egress of each port, ranging from 62Kbps to 100Mbps with 4095 levels

Storm control Support




Spanning tree STP, RSTP and MSTP

Link aggregation Up to 4 trunk groups, 8 ports in each trunk

Mirror Port-to-Multiport morroring, separate mirroring of ingress and egress traffc

MAC address table IEEE802.1D standard address learningMAC address learning function can be enabled/disable on each port8K MAC address, 100 static MAC addressSupport MAC address clear/search functionShow MAC address and MAC address stats functionThe number of dynamic learned MAC address can be limited on per port


VLAN IEEE802.1Q, double tagging (Q-in-Q), 4K active VLAN

Tranparent transmission

Support BPDU, LACP, IEEE802.1X on per port

Management Feature

Confguration CLI/Telnet/console


Management SNMP/RMON groups MIB1, 2, 3 and 9/Raisecom iEMS NMSSupport log system and different alarm notifcation levels

Cluster management


Download and upgrade

Support X-modem and FTP upgrade in BOOTROM modeSupport upload, upgrade system and confguration fles through FTP/TFTP

Schedule System tasks executed periodically or at appointed time

Time management Time and zone management, summer time, SNTP and SNTP server

Error tolerance System error report, immediately recover in case of serious error

Advanced feature

QoS & ACL Up to 4 output queuesIEEE802.1p priority, diffServe and IP TOS



Management port

1 console (RJ45)



Port specifcation

10BaseT (RJ45, Cat3/Cat4/Cat5 UTP)100BaseTX (RJ45, Cat5 UTP)100BaseLX/BX/FX (SC or LC fber connector, single/multi mode)

Fixed port 8 (10/100BaseTX)1 (100BaseFX)


Indicators for each ports

FDXLNK/ACT 10/100M


Weight 0.9KG

Power supply AC: 90~264V, 47~63Hz 0.3A(120V); 0.15A(230V)

Power consumption


Working ambience


Storage ambience


ISCOM2000 series is Raisecom new generation managed Ethernet Switch in terms of cost-effciency, outstanding performance, and high dependability. It implements wire-speed store and forward as well as powerful means of network management features. ISCOM2009, incorporated with 8 downlink ports and 1

optical uplink port, is especially suitable for residential community, offce building, campus, and enterprise end-users, with provisioning of Fast Ethernet access service for desktop and working groups.

Specifcation

Feature

Datasheet

ISCOM2009A Managed L2 Access Ethernet Switch




www.sis-group.com


OAM Support OAM function (802.3ah) and extended OAMOAM Discovery, Dying Gasp, OAM remote loopback, Variable request



Security policy Device management access ACLUser classifcation and user name/password protectionSupport AAA & Radius authenticationSupport MAC address and port bindingPrevent DoS attackSupport port isolation and protection portSecure Shell (ssh)


IEEE802.1wIEEE802.1XIEEE802.1adIEEE802.1sIEEE802.3ahIEEE802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseT portsIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTX100BaseBX100BaseLX/100BaseFXRMON I and II standardsSNMPv1/v2c/v3

Compliance

Ordering informationPart number Description

ISCOM2009-M Manageable intelligent layer-2 access switch with 8x10/100M electrical ports+1x100BASE-FX and AC power supply

ISCOM2009-S1 Manageable intelligent layer-2 access switch with 8x10/100M electrical ports+1x100BASE-FX and AC power supply



ISCOM2009-SS13 Manageable intelligent layer-2 access switch with 8x10/100M electrical ports+1x100BASE-FX and AC power supply




ISCOM2009A/AC Manageable intelligent layer-2 access switch, 8*10/100M electrical ports +1*100M SFP optical module, AC power supply

USFP-03/M 155M, transmission distance 2km, multi mode SFP module

USFP-03/S1 155M, transmission distance 15km, single mode SFP module



USFP-03/SS13 155M, transmission distance 15km, single strand (1310nm) SFP module




CSFP-03/S 155M, transmission distance: 40km, CWDM SFP optical module

CSFP-03/L 155M, transmission distance: 80km, CWDM SFP optical module

* SFP for ISCOM2009A




www.sis-group.com



ISCOM2016 Managed L2 Access Ethernet SwitchForwarding mode Store-and-forward


Port rate limiting Based on ingress and egress of each port, 64Kbps(0~2M)/1Mbps(2~100M) increment

Storm control Support storm control of broadcast, multicast and DLF according to port traffc percentage





Link aggregation Up to 4 truck groups, 8 ports in each trunk

Mirror Port-to-Multiport morroring, separate mirroring of ingress and egress traffcSupport blocking of non-mirroring port traffcConfgure respectively egress/ingress sampling interval at 1~1023 packetIngress/egress traffc mirroring based on source/destination MAC address




Packet tranparent transmission

BPDU, LACP, IEEE802.1X

Management Feature




Cluster management







Management port

1 console (RJ45)



Port specifcation





FDXLNK/ACT 10/100M

Dimension 442(W)*120(D)*1Umm

Weight 1.6KG


Power consumption


Working ambience


Storage ambience


Safety compliance


ISCOM2000 series is Raisecom new generation managed Ethernet Switch in terms of cost-effciency, outstanding performance, and high dependability. It implements wire-speed store and forward as well as powerful means of network management features. ISCOM2000 series, including ISCOM2008, ISCOM2016,

and ISCOM2026, is especially suitable for residential community, offce building, campus, and enterprise end-users, with provisioning of Fast Ethernet access service for desktop and working groups.

Specifcation

Feature

Datasheet




www.sis-group.com


Time management Time and zone management, summer time, SNTP for synchronization


Advanced feature

QoS & ACL Up to 4 output queuesSupport IEEE802.1p and DSCP PRI remark



Security policy Device management access ACLUser classifcation and user name/password protectionSupport AAA & Radius authenticationSupport MAC address and port bindingPrevent DoS attackPort isolation and protection portSecure Shell (ssh)

Maintenance Support debug information printSupport PING (Packet Internet Groper)Support Telnet client


Support


IEEE802.1wIEEE802.1XIEEE802.1sIEEE802.3ahIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTXIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2016/AC Standard layer-2 Ethernet switch with 16x10/100M electrical ports and AC power supply




www.sis-group.com


















Management Feature




Cluster management







Management port

1 console (RJ45)



Port specifcation

10BaseT (RJ45, Cat3/Cat4/Cat5 UTP)100BaseT (RJ45, Cat5 UTP)100BaseLX/BX/FX (LC fber connector, single/multi mode)

Fixed port 16 (10/100BaseT)1 (100BaseFX)



FDXLNK/ACT 10/100M


Weight 2.5 KG

Power supply AC: 90~264V, 47~63Hz 0.3A(120V), 0.15A(230V)DC: 36~75V

Power consumption


Working ambience


Storage ambience


ISCOM2000 series is Raisecom new generation managed Ethernet Switch in terms of cost-effciency, outstanding performance, and high dependability. It implements wire-speed store and forward as well as powerful means of network management features. ISCOM2017, inporporated with 16 downlink ports and 1

uplink port, is especially suitable for residential community, offce building, campus, and enterprise end-users, with provisioning of Fast Ethernet access service for desktop and working groups.

Specifcation

Feature

Datasheet




www.sis-group.com




Advanced feature







Support

Safety compliance



IEEE802.1wIEEE802.1XIEEE802.1sIEEE802.3ahIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTXIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2017-AC-M Standard layer-2 Ethernet switch with 16x10/100M electrical ports+1x100BASE-FX and AC power supply

ISCOM2017-AC-S1 Standard layer-2 Ethernet switch with 16x10/100M electrical ports+1x100BASE-FX and AC power supply



ISCOM2017-AC-SS13 Standard layer-2 Ethernet switch with 16x10/100M electrical ports+1x100BASE-FX and AC power supply




ISCOM2017-DC-M Standard layer-2 Ethernet switch with 16x10/100M electrical ports+1x100BASE-FX and DC power supply

ISCOM2017-DC-S1 Standard layer-2 Ethernet switch with 16x10/100M electrical ports+1x100BASE-FX and DC power supply



ISCOM2017-DC-SS13 Standard layer-2 Ethernet switch with 16x10/100M electrical ports+1x100BASE-FX and DC power supply







www.sis-group.com

ISCOM2017A Managed L2 Ethernet Switch


ISCOM2017A Managed L2 Access Ethernet SwitchForwarding mode Store-and-forward















Management Feature




Cluster management







Management port

1 console (RJ45)



Port specifcation

10BaseT (RJ45, Cat3/Cat4/Cat5 UTP)100BaseT (RJ45, Cat5 UTP)100BaseLX/BX/FX (SC fber connector, single/multi mode)




FDXLNK/ACT 10/100M


Weight 2.5 KG


Power consumption


Working ambience


Storage ambience


ISCOM2000 series is Raisecom new generation managed Ethernet Switch in terms of cost-effciency, outstanding performance, and high dependability. It implements wire-speed store and forward as well as powerful means of network management features. ISCOM2017A, inporporated with 16 downlink ports and 1

uplink port, is especially suitable for residential community, offce building, campus, and enterprise end-users, with provisioning of Fast Ethernet access service for desktop and working groups.

Specifcation

Feature

Datasheet




www.sis-group.com




Advanced feature







Support

Safety compliance



IEEE802.1wIEEE802.1XIEEE802.1sIEEE802.3shIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTXIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2017A/AC Standard layer-2 Ethernet switch with 16x10/100M electrical ports, oneexpansion slot, AC power supply

ISCOM2017A/DC Standard layer-2 Ethernet switch with 16x10/100M electrical ports, oneexpansion slot, DC power supply

SC200-FE-M Expansion module, 1x100M multi mode Ethernet optical interface, 2km(It must be customized)

SC200-FE-S1 Expansion module, 1x100M Ethernet optical interface, 20km



SC200-FE-SS13 Expansion module, 1x100M Ethernet single strand (1310nm) opticalinterface, 25km


SC200-FE-SS23 Expansion module, 1x100M Ethernet single strand (1310nm) opticalinterface,50km





www.sis-group.com


















Management Feature




Cluster management







Management port

1 console (RJ45)



Port specifcation



Expansion port 2 (100BaseLX/BX/FX)



FDXLNK/ACT 10/100M

Dimension 442(W)*266(D)*1Umm

Weight 3.5KG


Power consumption


Working ambience


Storage ambience


ISCOM2000 series is Raisecom new generation managed Ethernet Switch in terms of cost-effciency, outstanding performance, and high dependability. It implements wire-speed store and forward as well as powerful means of network management features. ISCOM2000 series, including ISCOM2008, ISCOM2016,

and ISCOM2026, is especially suitable for residential community, offce building, campus, and enterprise end-users, with provisioning of Fast Ethernet access service for desktop and working groups.

Specifcation

Feature

Datasheet




www.sis-group.com




Advanced feature







Support

Safety compliance



IEEE802.1wIEEE802.1xIEEE802.1sIEEE802.3ahIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTXIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2026/AC ISCOM2026 Manageable Standard layer-2 access switch with AC power supply

ISCOM2026/DC ISCOM2026 Manageable Standard layer-2 access switch with DC power supply

SC200-FE-M Expansion module, 1x100M multi mode Ethernet optical interface, 2km (It must be customized)




SC200-FE-SS13 Expansion module, 1x100M Ethernet single strand (1310nm) optical interface, 25km


SC200-FE-SS23 Expansion module, 1x100M Ethernet single strand (1310nm) optical interface,50km





www.sis-group.com

ISCOM2109 & ISCOM2109A Managed L2

Ethernet Switch


ISCOM2109A Managed L2 Access Ethernet Switch









Link aggregation Up to 4 truck groups, 8 100M ports in each trunk







Management Feature




Cluster management







Advanced feature

QoS & ACL Up to 4 output queuesIEEE802.1p priority, and DSCP PRI remark



Management port

1 console (RJ45)



Port specifcation

10BaseT (RJ45, Cat3/Cat4/Cat5 UTP)100BaseT (RJ45, Cat5 UTP)1000BaseLX/BX/FX (LC/SC fber connector, single/multi mode)




FDXLNK/ACT 10/100M

Dimension 43.6(H)*260(W)*130(D)mm

Weight 1.1kg

Power supply AC: 90~264V, 47~63HzDC: 36~72V

Power consumption


Working ambience


Storage ambience


Safety compliance


ISCOM2100 series is Raisecom new generation managed Ethernet Switch in terms of cost-effciency, outstanding performance, and high dependability. It implements wire-speed store and forward as well as powerful means of network management features. ISCOM2109, incorporated with 8 downlink ports and 1 Gigabit

fber uplink port (both fxed optical connector and SFP optical module are available), is especially suitable for residential community, offce building, campus, and enterprise end-users, with provisioning of Fast Ethernet access service for desktop and working groups.

Specifcation

Feature

Datasheet





www.sis-group.com




www.sis-group.com







IEEE802.1wIEEE802.1XIEEE802.1sIEEE802.3ahIEEE802.1agIEEE802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseT portsIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3ab 1000BaseTIEEE802.3z 1000BaseX1000BASE-BX (SFP)1000BaseSX1000BaseLX/LH1000BaseZXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2109-M-AC Manageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, AC power supply

ISCOM2109-S1-AC Manageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, AC power supply



ISCOM2109-SS13-ACManageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, AC power supply




ISCOM2109-M-DC Manageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, DC power supply

ISCOM2109-S1-DC Manageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, DC power supply



ISCOM2109-SS13-DCManageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, DC power supply




ISCOM2109A/AC Manageable layer-2 Ethernet switch, 8*10/100BaseT+1 SFP module for uplink, AC power supply

ISCOM2109A/DC Manageable layer-2 Ethernet switch, 8*10/100BaseT+1 SFP module for uplink, DC power supply



USFP-GB/M 1.25G, transmission distance 2km, SFP connector

USFP-GB/S1 1.25G, transmission distance 25km, SFP connector



USFP-GB/SS13 1.25G, transmission distance 15km, single strand (1310nm) SFP module


CSFP-GB/S 1.25G, transmission distance 40km, CWDM SFP optical interface module

CSFP-GB/L 1.25G, transmission distance 80km, CWDM SFP optical interface module

* SFP indicates for ISCOM2109A




www.sis-group.com

ISCOM2109A-MA Managed L2 Ethernet Switch


ISCOM2109A-MA Managed L2 Access Ethernet Switch


Max frame size 1632 or 1522 Bytes

Port rate limiting Based on ingress and egress of each port, different increments at different rates: 64Kbps (0~1M)/1Mbps (1~100M)/10Mbps (100~1000M)













OAM standard OAM and extended OAM (Master mode)




Cluster management







Advanced feature

QoS & ACL Up to 4 output queuesIEEE802.1p priority, and DSCP PRI remark



Management port

1 console (RJ45)



Port specifcation





FDXLNK/ACT 10/100M


Weight 1.1kg


Power consumption


Working ambience


Storage ambience


Safety compliance


ISCOM2100 series is Raisecom new generation managed Ethernet Switch in terms of cost-effciency, outstanding performance, and high dependability. It implements wire-speed store and forward as well as powerful means of network management features. ISCOM2109A, incorporated with 8 downlink ports and 1 Gigabit

fber uplink port, is especially suitable for residential community, offce building, campus, and enterprise end-users, with provisioning of Fast Ethernet access service for desktop and working groups.

Specifcation

Feature

Datasheet




www.sis-group.com







IEEE802.1wIEEE802.1XIEEE802.1sIEEE802.3ahIEEE802.1adIEEE802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseT portsIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3ab 1000BaseTIEEE802.3z 1000BaseX1000BaseSX1000BaseLX/LH1000BaseZXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2109A-M-AC Manageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, AC power supply

ISCOM2109A-S1-AC Manageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, AC power supply







ISCOM2109-M-DC Manageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, DC power supply








ISCOM2109A/AC Manageable layer-2 Ethernet switch, 8*10/100BaseT+1 SFP module for uplink, AC power supply





www.sis-group.com











* SFP indicates for ISCOM2109A




www.sis-group.com

ISCOM2109F Managed L2 Ethernet Optical Switch


ISCOM2109F Managed L2 Access Ethernet Optical

Switch



Port rate limiting Based on ingress and egress of each port, 64Kbps(0~2M)/1Mbps(2~100M)/8Mbps(100M~) increment

Storm control Support storm control of broadcast, multicast and DLF according to data rate





Link aggregation Up to 2 trunk groups, 8 100M or 1 1000M port in each trunk










Cluster management







QoS & ACL Up to 4 output queuesSupport IEEE802.1p and DSCP PRI remarking



Management port

1 console (RJ45)



Port specifcation

100BaseFX(SC fber connector)1000BaseLX/BX/FX (SC fber connector, single/multi mode)

Fixed port 8 (100BaseFX)

Expansion port 1 (100BaseFX/100BaseT/1000BaseT/1000BaseFX)


Indicators for 100M optical port

LNK, ACT


Weight 2.5KG

Power supply AC: 90~264V, 47~63Hz 1A(115V), 0.7A(230V)

Power consumption


Working ambience


Storage ambience


ISCOM2100 series is Raisecom new generation managed Ethernet Switch in terms of cost-effciency, outstanding performance, and high dependability. It implements wire-speed store and forward as well as powerful means of network management features. ISCOM2109F, equipped with 8 downlink optical ports and 1

optional uplink fber port, is especially suitable for residential community, offce building, campus, and enterprise end-users, with provisioning of Fast Ethernet access service for desktop and working groups.

Specifcation

Feature

Datasheet




www.sis-group.com





Support

Safety compliance



IEEE802.1wIEEE802.1XIEEE802.3adIEEE802.1sIEEE802.3ahIEEE802.1adIEEE802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseTIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3ab 1000BaseTIEEE802.3z 1000BaseX1000BaseSX1000BaseLX/LH1000BaseZXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2109F-M/AC Manageable intelligent aggregation layer-2 switch, 8*100M fixed Ethernet optical ports(dual-strand fiber,1310nmTx, 0~2km), one expansion slot, 115V or 230V AC

ISCOM2109F-S1/AC Manageable intelligent aggregation layer-2 switch, 8*100M fixed Ethernet optical ports(dual-strand fiber, 1310nmTx, 0~25km), one expansion slot, 115V or 230V AC

ISCOM2109F-S2/AC Manageable intelligent aggregation layer-2 switch, 8*100M fixed Ethernet optical ports(dual-strand fiber, 1310nmTx, 10~60km), one expansion slot, 115V or 230V AC

ISCOM2109F-M/DC Manageable intelligent aggregation layer-2 switch, 8*100M fixed Ethernet optical ports(dual-strand fiber,1310nmTx, 0~2km), one expansion slot, -48V DC

ISCOM2109F-S1/DC Manageable intelligent aggregation layer-2 switch, 8*100M fixed Ethernet optical ports(dual-strand fiber, 1310nmTx, 0~25km), one expansion slot, -48V DC

ISCOM2109F-S2/DC Manageable intelligent aggregation layer-2 switch, 8*100M fixed Ethernet optical ports(dual-strand fiber, 1310nmTx, 10~60km), one expansion slot, -48V DC

SC200-GE-T Expansion module, 1x10/100/1000M Ethernet electrical interface

SC200-GE-M Expansion module, 1x1000M multi mode Ethernet optical interface, 500m (It must be customized)

SC200-GE-S1 Expansion module, 1x1000M Ethernet optical interface, 20km

SC200-GE-S2 Expansion module, 1x1000M Ethernet optical interface, 60km (It must be customized)








SC200-FE-SS23 Expansion module, 1x100M Ethernet single strand (1310nm) optical interface,50km





www.sis-group.com

ISCOM2109-MA & ISCOM2109A-MA Managed L2

Ethernet Switch


















Management Feature




Cluster management







Advanced featureOAM

standard and extended OAM (Master mode)

Advanced feature



Management port

1 console (RJ45)



Port specifcation





FDXLNK/ACT 10/100M


Weight 1.1kg


Power consumption


Working ambience


Storage ambience


Safety compliance


ISCOM2100 series is Raisecom new generation managed Ethernet Switch in terms of cost-effciency, outstanding performance, and high dependability. It implements wire-speed store and forward as well as powerful means of network management features. ISCOM2109-MA and ISCOM2109A-MA, incorporated with

8 downlink ports and 1 Gigabit fber uplink port (both fxed optical connector and SFP optical module are available), is especially suitable for residential community, offce building, campus, and enterprise end-users, with provisioning of Fast Ethernet access service for desktop and working groups.

Specifcation

Feature

Datasheet

ISCOM2109-MA Managed L2 Access Ethernet Switch




www.sis-group.com

Raisecom Technology Co., Ltd.QoS & ACL support up to 4 output queues

IEEE802.1p priority, and DSCP PRI remarkbased on IP ACLapply IP ACL on layer3 interfacesupport port trustbased on VLAN, SMAC and DMAC priority

(PPPoE intermediate agent(PPPOE+)

Extends the packets of PPPoE protocol, inserts user port information such as Circuit-Id /Linå-ID tag


Strict Priority (SP), Weighted Round Robin (WRR) and SP + WRR




Support


IEEE802.1wIEEE802.1XIEEE802.1sIEEE802.3ahIEEE802.1adIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseT portsIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3ab 1000BaseTIEEE802.3z 1000BaseX1000BaseSX1000BaseLX/LH1000BaseZXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2109-MA-M-AC Manageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, AC power supply

ISCOM2109-MA-S1-AC Manageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, AC power supply

ISCOM2109-MA-S2-ACManageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, AC power supply

ISCOM2109-MA-S3-ACManageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, AC power supply

ISCOM2109-MA-SS13-AC

Manageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, AC power supply







ISCOM2109-MA-M-DC Manageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, DC power supply

ISCOM2109-MA-S1-DCManageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, DC power supply



ISCOM2109-MA-SS13-DC

Manageable layer-2 Ethernet switch, 8*10/100BaseT+1*1000BaseFX, DC power supply






www.sis-group.com






ISCOM2109A-MA/AC Manageable layer-2 Ethernet switch, 8*10/100BaseT+1 SFP module for uplink, AC power supply

ISCOM2109A-MA/DC Manageable layer-2 Ethernet switch, 8*10/100BaseT+1 SFP module for uplink, DC power supply









* SFP indicates for ISCOM2109A-MA




www.sis-group.com

ISCOM2110A-MA Managed L2 Ethernet Switch



Layer 2 Switching


Rate limiting CIR, CBS, EIR, EBS per UNI

Traffc control IEEE 802.3x full-duplex fow controlstorm control of broadcast, multicast and DLFHOL




Link aggregation Up to 4 truck groups, 8*100M ports or 2*1000M ports in each trunkSupport load-sharing based on source MAC address, destination MAC address, and source + destination MAC address policies

Port Mirroring Port-to-Multiport morroring, separate mirroring of ingress and egress traffc and different intervals can be confgured respectivelySupport mirror based on source MAC address or destination MAC addressSupport blocking of non-mirroring port traffc

MAC address table IEEE802.1D standard address learningMAC address learning function can be enabled/disable on each port8K MAC address, 100 static MAC addressSupport MAC address clear/search functionThe number of dynamic learned MAC address can be limited on per port


Network protocol DHCP Client

QoS

QoS - 4 output queues- Queue schedule algorithm: SP, WRR and SP + WRR- Ingress policing is provided based on CoS, , DSCP, and port.

Security

Security policy Device management access ACLUser classifcation and user name/password protectionSupport AAA & Radius & TACACS+ * authenticationSupport MAC address and port bindingPrevent DoS attackPort isolation and protection portPort-based IEEE802.1x authenticationSecure Shell (ssh * )

Management




Management port

1 console (RJ45)



Port specifcation


Ports 8 (10/100BaseT)2 (1000 BaseX)



FDXLNK/ACT 10/100M


Weight 1.1kg


Power consumption


Working ambience


Storage ambience


ISCOM2100 series is a fully managed Ethernet Switch product line, provides cost-effective L2aggregation with carrier grade reliability.Its wire-speed store and forward capabilities, and powerful network management featuresare ideal for deployments in MDUs, residential,offce buildings, and campus environment.

ISCOM2110A-MA is designed to provideeight FE downlinks and two GigE uplinksfor redudant protection; supports metro access standards, basic 802.3.ah OAM discovery, and 802.1ag CFM, and SLA for Carrier Ethernet services.

Specifcation

Feature

Datasheet




www.sis-group.com

Raisecom Technology Co., Ltd.Management and maintenance


Cluster management



Support X-modem and FTP upgrade in BOOTROM modeSupport upload, upgrade system and confguration fes through FTP/TFTP

OAM



Other features

L2/L3 SLA * commitment (frame delay, jitter and loss)

- Packet Loss- Frame Delay- Ethernet Jitter

Diagnostic Mornitoring of SFP

Supported

Ethernet Ring * Supported

PPPoE intermediate agent(PPPOE+) *

Supported


Supported


IEEE802.1wIEEE802.1xIEEE 802.3xIEEE802.3ahIEEE802.1agIEEE802.1adIEEE802.3adIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3z 1000BaseX1000BaseSX1000BaseLX/LH1000BaseZXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2110A-MA-AC Manageable layer-2 Ethernet switch, 8*10/100BaseT+2*1000BaseFX, AC power supply

ISCOM2110A-MA-DC Manageable layer-2 Ethernet switch, 8*10/100BaseT+2*1000BaseFX, DC power supply









Safety compliance


* Optional feature




www.sis-group.com

ISCOM2110A-MA-PWR4 Managed L2 Ethernet

Switch


ISCOM2110A-MA-PWR4 Managed L2 Access

Ethernet Switch

Performance Switching fabric 5.6 Gbps

Capacity 32MB SDRAM4MB fash128KB Switch buffer1K IGMP groups

Max Transmission Unit

1,632 Bytes

Management port 1 console (RJ45)


9,600bps/8bit/none parity/1 stop bit/none fow control

Port specifcation 10BASE-T (RJ45, Cat3/Cat4/Cat5 UTP)100BASeE-T (RJ45, Cat5 UTP)1000BASE-LX/BX/FX (LC/SC fber connector, single/multi mode)

Ports 8 (10/100BASE-T, Port 1~4: PoE PSE port)2 (1000 BASE-X SFP)

Indicators Power supply (fashing) System (fashing)10/100BASE-T: FDX, 100M & LNK/ACT indicators.1000BASE-X SFP: LNK/ACT indicator


Weight ≤2.1Kg


Power consumption

≤90W

Working ambience

Temp: 0 ~ 50 centigradeRH: 10~90% non-condensing

Storage ambience

Temp: -25~70 centigrade

ISCOM2100 series is a fully managed Ethernet Switch product line, provides cost-effective L2aggregation with carrier grade reliability.Its wire-speed store and forward capabilities, and powerful network management featuresare ideal for deployments in MDUs, residential,offce buildings, and campus environment. ISCOM2110A-MA-PWR4 is designed to provide

eight FE downlinks and two GigE uplinksfor redudant protection; supports metro access standards, basic 802.3.ah OAM discovery, 802.1ag CFM, and SLA for Carrier Ethernet services.With PoE function, ISCOM2110A-MA-PWR can be PSE for devices like wireless AP and vedio camera.

Specifcation

Feature

Datasheet

Basic Feature

Forwarding Mode Store-and-forward mode Buffer size:128KB

Packet Forwarding MTU:1,632byte DLF forward control

Bandwidth Profle Max rate limit:1,000,000KbpsBased on Ingress and/or Egress - per portIncrements: 64Kbps (64K-1M), 1Mbps (1-100M), 10Mbps (100-1000M)Rate limit based on ethertype / Queue

Storm Control Broadcast storm controlMulticast storm controlUnicast DLF storm control Control mode: Global, bps

Link Aggregation Up to 5 groupsUp to 8 ports in each group Support load balance based on CRC harsh value of MAC address

Mirroring N:1 port mirroring Separate mirrorings for egress & ingress ports Mirroring per VLANAllow separate mirroring confgurations for ingress & egress ports

MAC Address Table IEEE 802.1Q 8K MAC addressAdd/remove MAC address View MAC address statistic Search MAC addressAging time:15-3825sMAC table threshold per portMAC table limit:1-255

Multicast 1K multicast addresses Static multicast groupIGMP Snooping (V1,V2,V3) Multicast fltering & unknown multicast discardMVR

STP STP, RSTP & MSTP 64 instances

Flow Control IEEE 802.3x in full duplex modeBack pressure in half duplex mode Port-based confgurations

VLAN IEEE 802.1Q VLAN4K active VLANsPort PVID Overwrite

QinQ Port QinQ

L2TP BPDU




www.sis-group.com


DOT1X LACP Specifed VLAN to receive specifc multicast

Digital Diagnostic SFP digital diagnostic

Port Loopback Detection Individual port will be shutdown if loopback is detected

Port Backup Support

Ethernet Ring RAISECOM Ethernet ring: ≤ 50 ms recovery timeMax 8 ethernet rings, max 124 devices in each ring

Management Feature

System Management CLIARP16 L3 interfaces, Super VLAN, max 4K VLANsTelnet Console SSHV2RMON Group 1,2,3 & 9SNMPBridge MIB (RFC1493)RAISECOM NMS Web managementSystem logHierarchical alarmsLink alarm per portKeepalive reportFault pass throughModule information management

Cluster Management RAISECOM Neighbor Discovery Protocol (RNDP)RAISECOM Topology Discovery Protocol (RTDP)RAISECOM Cluster Management Protocol (RCMP)RAISECOM Cluster Program

Auto Confguration Support

Software Upgrade Xmodem/FTP upgrade in BOOTROMFTP/TFTP (system & confguration fles)

Scheduling System task scheduling

Time Management TimezoneTime modifcationDSTSystem time synchronization by SNTP ClientNTP

DHCP DHCP SnoopingDHCP ClientDHCP Option82

OAM 802.3ah OAM (Discovery, Link Performance, Remote loopback, Fault detection and Performance Stats per OAM standards)OAM MasterDying GaspExtended OAM (Confgure on remote switches)

CFM 802.1ag, Y.1731 protocol, Support 256 MEP,256 MA

SLA Layer-2/Layer-3 SLA (frame delay, jitter & loss)

Error Tolerance & Redundancy

System error reportFast recovery during serious error

Filter Switch access IP packet flter

PoE 4 PoE ports (port 1-4)port max power confg (max value 15.4W, least value 4W)critical, high, low priority; auto/manual electricity managementOverheating protectionIEEE802.3af, RFC3621

Compliance

MIB Management

802-1x-2004-MIBDISMAN-PING-MIBDOT3-OAM-MIBIEEE8021-CFM-MIB81RFC1213RFC1493RFC1757RFC1907RFC2233RFC2571RFC2572RFC2573NRFC2573PRFC2573TRFC2574RFC2575RFC2665RFC2674PRFC4363QRFC3621TRACEROUTERAISECOM-ACL-MIBRAISECOM-COMMON-MANAGEMENT-MIBRAISECOMDOT1XMIBRAISECOM-EXTEND-OAM-UPGRADE-MIBRAISECOM-EXTOAM-MIBRAISECOM-KEEPALIVE-MIBRAISECOM-OAM-MIBRAISECOM-OPTICAL-MONITOR-MIBRAISECOM-PPPOEAGENT-MIBRAISECOM-QOS-MIBRAISECOM-RCMP-MIBRAISECOM-RELAY-MIBRAISECOM-REMOTE-MANAGEMENT-LOCAL-MIBRAISECOM-REMOTE-MANAGEMENT-REMOTE-MIBRAISECOM-RNDP-MIBRAISECOM-RTDP-MIBRAISECOM-SCHEDULE-MIB

Safety compliance

N/A (In process of applying )




www.sis-group.com


RAISECOM-SYSLOG-SERVICE-MIBSWITCH-SYSTEM-MIBRAISECOM-UPGRADE-MIBRAISECOM-USER-MIBRC802-1X-MIBRCCFMRCDOT1AGRCQINQRCSLARMONMIBSWITCH-AUTOCONFIG-MIBSWITCH-DHCPCLIENT-MIBSWITCH-DHCPOPTION-MIBSWITCH-DHCPSNOOPING-MIBSWITCH-ERING-MIBSWITCH-IFEXTEND-MIBSWITCH-L3FILTER-MIBSWITCH-LINKSTATETRACK-MIBSWITCH-MACCONFIG-MIBSWITCH-MSTP-MIBSWITCH-MVR-MIBSWITCH-NTP-MIBSWITCH-PORTBACKUP-MIBSWITCH-PORTMIRROR-MIBSWITCH-PORTSTATISTIC-MIBSWITCH-RATELIMIT-MIBSWITCH-RSTP-MIBSWITCH-SNMP-MIBSWITCH-SYSTEM-MIBSWITCH-TRUNK-MIBSWITCH-VLANCFG-MIB

Standards IEEE 802.1Q VLANIEEE 802.3ad Link AggregationIEEE 802.1ad QinQIEEE 802.1D Spanning Tree ProtocolIEEE 802.1w RSTPIEEE 802.1s MSTPIEEE 802.1x SecurityIEEE 802.1p CoS PrioritizationIEEE 802.3x Flow ControlIEEE 802.3ah OAMIEEE 802.1ag Connectivity Fault ManagementITU Y.1731 Services OAMStatic RoutingIGMP v1, v2, v3 MulticastRMON I and II standardsSNMPv1,SNMPv2c and SNMPv3MEF9 MEF14 IEEE802.3af POE

QoS CoS to queue mappingDSCP to queue mappingPort priority overridePort TRUST modeTRUST port priorityTRUST CoS priorityTRUST DSCP priorityGlobal queue scheduling4 queues per portSPWRRWRR weight range:1-125SP+WRR

Safety Feature User classifaction & password protectionRADIUSTACAS+ Binding of MAC address & portPort protectionPPPoE AgentDOT1X

Routing Protocol Static routing & default gateway

Maintenance Debug information outputPING (Packet Internet Groper)Telnet ClientTrace routePort statisticPort dynamic statistic

Password Recovery Support

MEF 9&14 Support

Part number Description

ISCOM2110A-MA-PWR4-AC

Manageable layer-2 Ethernet switch, 8*10/100BASE-T+2*1000BASE-X SFP, AC power supply, 4*PoE ports (port1-port4)

Ordering Information




www.sis-group.com

ISCOM2110-MA Managed L2 Ethernet Switch


ISCOM2110-MA Managed L2 Access Ethernet Switch
















Management Feature

Confguration CLI/Telnet/console/WEB based



Cluster management







Advanced featureOAM

standard and extended OAM (Master mode)

Advanced feature



Management port

1 console (RJ45)



Port specifcation



Expansion port 2 1000M SFP opticalmodules



FDXLNK/ACT 10/100M


Weight 1.1kg


Power consumption


Working ambience


Storage ambience


ISCOM2100 series is a fully managed Ethernet Switch product line, provides cost-effective L2aggregation with carrier grade reliability.Its wire-speed store and forward capabilities, and powerful network management featuresare ideal for deployments in MDUs, residential,offce buildings, and campus environment.

ISCOM2110-MA is designed to provideeight FE downlinks and two GigE uplinksfor redudant protection; supports metro access standards, basic 802.3.ah OAM discovery, and 802.1ag CFM, and SLA for Carrier Ethernet services.

Specifcation

Feature

Datasheet




www.sis-group.com

Raisecom Technology Co., Ltd.QoS & ACL support up to 4 output queues

IEEE802.1p priority, and DSCP PRI remarkbased on IP ACLapply IP ACL on layer3 interfacesupport port trustbased on VLAN, SMAC and DMAC priority



Ethernet Ring Raisecom Ethernet Ring is a private protocol of Raisecom. It can not only prevent data loop from causing broadcast storm effciently when the Ethernet ring is complete, but also restore communication channels among nodes on the Ethernet ring rapidly (50ms) when a link is torn down

OAM IEEE802.3ah:- OAM discoveryIEEE802.1ag:- Continuity Check Messages- Traceroute Messages- Loopback MessagesSLA:- Packet Loss- Frame Delay- Ethernet Jitter


Strict Priority (SP), Weighted Round Robin (WRR) and SP + WRR




Support


IEEE802.1wIEEE802.1XIEEE802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseT portsIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3ab 1000BaseTIEEE802.3z 1000BaseX1000BaseSX1000BaseLX/LH1000BaseZXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2110-MA-AC Manageable layer-2 Ethernet switch, 8*10/100BaseT+2*1000BaseFX, AC power supply

ISCOM2110-MA-DC Manageable layer-2 Ethernet switch, 8*10/100BaseT+2*1000BaseFX, DC power supply












www.sis-group.com



ISCOM2117 Network Managed L2 Access

Ethernet SwitchForwarding mode Store-and-forward















Management Feature




Cluster management







Advanced feature

QoS & ACL Up to 4 output queuesIEEE802.1p priority, and DSCP PRI remarking



Management port

1 console (RJ45)



Port specifcation





FDXLNK/ACT 10/100M

Dimension TBC

Weight TBC


Power consumption


Working ambience


Storage ambience


Safety compliance



Gigabit fber uplink port, is especially suitable for residential community, offce building, campus, and enterprise end-users, with provisioning of Fast Ethernet access service for desktop and working groups.

Specifcation

Feature

Datasheet

Preliminary




www.sis-group.com







Support


IEEE802.1wIEEE802.1XIEEE802.1sIEEE802.3ahIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseT portsIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3ab 1000BaseTIEEE802.3z 1000BaseX1000BaseSX1000BaseLX/LH1000BaseZXRMON I and II standardsSNMPv1/v2c/v3

Compliance




www.sis-group.com



ISCOM2118 Network Managed L2 Access

Ethernet Switch
















Management Feature




Cluster management







Advanced feature




Management port

1 console (RJ45)



Port specifcation





FDXLNK/ACT 10/100M

Dimension TBC

Weight TBC


Power consumption


Working ambience


Storage ambience


Safety compliance




Specifcation

Feature

Datasheet




www.sis-group.com








Compliance


ISCOM2118/AC Manageable layer-2 Ethernet switch, 16*10/100BaseT+2*1000BaseFX, AC power supply

ISCOM2118/DC Manageable layer-2 Ethernet switch, 16*10/100BaseT+2*1000BaseFX, DC power supply












www.sis-group.com

ISCOM2118-MA Managed L2 Ethernet Switch


ISCOM2118-MA Network Managed L2 Access

Ethernet Switch



Port rate limiting Based on ingress and egress of each port, different increments at different rates: 64Kbps (64K~1M)/1Mbps (1~100M)/10Mbps (100~1000M)













Management Feature




Cluster management







Advanced feature




Management port

1 console (RJ45)



Port specifcation


Fixed port 16 (10/100BaseT)2 SFP(1000BaseFX)



FDXLNK/ACT 10/100M

Dimension 180(D)?440(W)?43.6(H)mm

Weight 2.5Kg


Power consumption


Working ambience


Storage ambience


Safety compliance


ISCOM2100-MA series is Raisecom new generation managed Ethernet Switch in terms of cost-effciency, outstanding performance, and high dependability. It implements wire-speed store and forward as well as powerful means of network management features. ISCOM2118-MA, incorporated with 16 downlink ports and 2


Specifcation

Feature

Datasheet




www.sis-group.com





Extends the packets of PPPoE protocol, inserts user port information such as Circuit-Id /Line-ID tag




Compliance


ISCOM2118-MA/AC Manageable layer-2 Ethernet switch, 16*10/100BaseT+2*1000BaseFX, AC power supply

ISCOM2118-MA/DC Manageable layer-2 Ethernet switch, 16*10/100BaseT+2*1000BaseFX, DC power supply












www.sis-group.com

ISCOM2126 Aggregation Switch

Product Introduction

ISCOM2126 series Ethernet Switches are aggregation layer-2 switches with network management

capability. It has 24 10/100M auto-sensing Ethernet ports and 2 expansion slots, and provides 100M and

1G wire-speed connection. It also provides stable and reliable guarantee of carrier-grade solutions. It has

many kinds of applications, such as campus networks, enterprise networks and communities.

Product Features

XXXXX Flexible Scalability

? Provide 24 10/100M auto-sensing Ethernet ports and 2 expansion slots, support 3 kinds of

expansion module.

XXXXX Complete Security

? Support VLAN based on 802.1Q and port.

? Provide binding based on port and MAC.

? Support the function of restraining broadcast storm.

? Loop-back test can guarantee the long-time running of network.

XXXXX QoS Guarantee

? Support QoS function based on 802.1p standard. Every port supports two priority output queues.

? Support 2 kinds of queue scheduling algorithm, strict priority scheduling, weighted priority

scheduling.

? Support bandwidth management based on port. The range is from 100K to 100M with the incre-

ment of 100K. Provide flexible and reasonable policy of bandwidth control.

XXXXX Convenient Management and Maintenance

? Support SNMP/RMON. It can be managed by integrative network management platform SNMP-

based RC NVIEW of Raisecom, realizing performance monitor, traffic statistic and etc function.

? It supports out-of-band management through the console port.

? It supports FTP, TELNET, and provides on-line software upgrade.




www.sis-group.com

Performance Introduction

Product Performance ISCOM 2126

Number of port 24*10/100M Ethernet ports

Number of expansion slots 2

Expansion module 1000M optical port /Ethernet port

100M optical port

Backboard switch capability 12.8G

MAC address capability 6K

Switch mode Wire-speed forwarding

Port aggregation 7groups

Port mirroring Support

Auto MDI/MDIX Support

QoS Support

Restrain broadcast storm Support

Bandwidth control Range from 100K to 100M with the increment

of 100K

Flow control 802.3x, Back pressure

802.1Q VLAN 56 2

Port VLAN Support

GVRP Support

Spanning Tree Protocol Support

Safety strategy Support the binding based on port and MAC

ACL Support

IGMP SNOOPING Support

Management method telnet, console, SNMP

Power consumption 30W

Working Temp 0~50 degrees Centigrade

Humidity 5%~95%

EMC Meet the national corresponding standard

EMI >=140dB m

Dimension 440*280*44.5(mm)

Installation type 19”rack or desktop

<




www.sis-group.com

ISCOM2126 is the aggregation switch. It supports bandwidth man-

agement base on port. The range is form 100k to 100M with the increment

of 100k. Administrator can set the bandwidth according to the business

flow of customers. It realizes the different expenses to different customers,

in order to increase economic benefits for carriers. ISCOM2126 has SNMP

network management capability, almost all configurations can be set on the

network management platform, it is convenient to manage for administrators.

All layer-2 switches of Raisecom support cluster management. The func-

tion saves expensive IP address resource and the time of monitoring equip-

ment and debugging fault point. Administrators can simply add and reduce

the switch of cluster management area. The above application provides a

cost-effective solution.

APPLICATION

ISCOM2126

Network Management




www.sis-group.com

ORDERING INFO

Part Number Description

ISCOM2126/AC Aggregated Ethernet switch, SNMP-management, 24*10/100M RJ45

ports, two expansion slots, 115V or 230V AC

ISCOM2126/DC Aggregated Ethernet switch, SNMP-management, 24*10/100M RJ45

ports, two expansion slots, -48V DC

SC200-FE-S1 Expansion module, 1*100M Ethernet optical interface, 20km

SC200-FE-S3 Expansion module, 1*100M Ethernet optical interface,120km

SC200-GE-T Expansion module, 1*10/100/1000M Ethernet electrical interface

SC200-GE-S1 Expansion module, 1*1000M Ethernet optical interface, 20km

SC200-GE-S2 Expansion module, 1*1000M Ethernet optical interface,

60km (It must be customized)






www.sis-group.com

ISCOM2126E L2 Aggregation Switch


ISCOM2126E Enhanced L2 Metro Ethernet Access

SwitchForwarding mode Store-and-forward

Max frame size 1536 KB




In case a port is connected to a loop circuit, the port will be shut down by Switch automatically; when the loop circuit unchains, the port will recover automatically. This function will confict with STP and is confgurable.




Mirror Port-to-Multiport morroring, separate mirroring of ingress and egress traffc and different intervals can be confgured respectivelySupport mirror based on source MAC address or destination MAC addressSupport blocking of non-mirroring port traffc

MAC address table IEEE802.1D standard address learningMAC address learning function can be enabled/disable on each port8K MAC address, 100 static MAC addressSupport MAC address clear/search functionShow MAC address and MAC address stats functionThe number of dynamic learned MAC address can be confgured on per port



L2 packets transparent transmission

BPDU/GARP/GMRP/GVRP/IEEE802.1x/LACP(This function will confict with STP)

Management Feature



Management SNMP/RMON groups MIB1,2,3 and 9/Raisecom iEMS NMSSupport log system and different alarm notifcation levels

Cluster management




Management port

1 console (RJ45)



Port specifcation

10BaseT (RJ45, Cat3/Cat4/Cat5 UTP)100BaseT (RJ45, Cat5 UTP)1000BaseT (RJ45, Cat5 UTP)100BaseLX/BX/FX (LC fber connector, single/multi mode)


Expansion port 2 (100BaseFX/1000BaseT/1000BaseFX)

Indicators Power SupplySystem (fashing)FDX for each portLINK/ACTIVE 10/100M


Weight 3.5 KG

Power supply AC: 90~264V, 47~63Hz, 1.05A(120V)/0.55A(230V)DC: 36~75V

Power consumption


Working ambience


ISCOM2126E acts as an enhanced aggregation Ethernet Switch, which can be network managed both locally and remotely. It is designed for Raisecom’s Carrier Ethernet portfolio. ISCOM2126E provides 24 10/100BaseT auto-sensing service ports and 2 expansion slots, which are usually used to accommodate expansion modules equipped with 100/1000BaseT/FX uplink ports. It adopts

industrial-advanced microchips and switching structure to ensure carrier-class stability and dependability. ISCOM2126E contributes to extremely cost-effective solutions that are suitable for campus, enterprise, and residential community networks aggregation scenarios, helping carriers not only reduce Capital Expenditure but also Total Cost of Ownership.

Specifcation

Feature

Datasheet




www.sis-group.com







Advanced feature

QoS & ACL Up to 4 output queuesSupport IEEE802.1p and TOS/DSCP PRI remark

Security policy Device management access ACLUser classifcation and user name/password protectionSupport AAA & Radius authenticationSupport MAC address and port bindingPrevent DoS attackSupport port isolation, protection portSecure Shell (ssh)



Support

Storage ambience


Safety compliance

UL


IEEE802.1wIEEE802.1xIEEE802.1sIEEE802.3ahIEEE802.1adIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseT portsIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3ab 1000BaseTIEEE802.3z 1000BaseX1000BaseSX1000BaseLX/LH1000BaseZXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2126E/AC Manageable intelligent layer-2 switch with AC power supply

ISCOM2126E/DC Manageable intelligent layer-2 switch with DC power supply

















www.sis-group.com

ISCOM2126EA-MA L2 Aggregation Switch


ISCOM2126EA-MA Enhanced L2 Metro Ethernet

Access Switch

Layer 2 Switching


Rate limiting CIR, CBS, EIR, EBS per UNI, per EVC, and per CVLAN (CoS)

Traffc control IEEE 802.3x full-duplex fow controlstorm control of broadcast, multicast and DLFHOL





Port Mirroring Port-to-Multiport morroring, separate mirroring of ingress and egress traffc and different intervals can be confgured respectivelySupport mirror based on source MAC address or destination MAC addressSupport blocking of non-mirroring port traffc

MAC address table IEEE802.1D standard address learningMAC address learning function can be enabled/disable on each port8K MAC address, 100 static MAC addressSupport MAC address clear/search functionThe number of dynamic learned MAC address can be confgured on per port

VLAN IEEE802.1Q, 4K active VLAN, Double tagging (Q-in-Q), Flexible QinQ

Network protocol - DHCP Snooping (Dynamic Host Confguration Protocol Snooping)- DHCP Snooping Option 82 - DHCP Client

QoS/ACL

QoS - 4 output queues- Queue schedule algorithm: SP, WRR and SP + WRR- Ingress policing is provided based on CoS, VLAN ID, DSCP, port , VLAN

ID and QoS ACLs (IP ACLs or MAC ACLs) which can include source and destination IP address, source and destination MAC address, Layer 4 TCP/UDP information, or any combination of these felds.- Support fow rate limitation.

ACL Support L2 (Layer 2) ~ L7 (Layer 7) packet ftering; provide the ftering based on the source MAC address, destination MAC (Medium Access Control) address, source IP address, destination IP address, port, protocol, VLAN (Virtual Local Area Network), VLAN range, MAC address range, packet contents and illegal frame.

Security



Max frame size 1522 KBJumbo frame: 2048KB

Management port

1 console (RJ45)



Port specifcation


Ports 24 (10/100BaseT)2 (1000 BaseX)



Weight 3.5 KG


Power consumption


ISCOM2126EA-MA acts as an enhanced aggregation Ethernet Switch, which can be network managed both locally and remotely. It is designed for Raisecom’s Carrier Ethernet portfolio. ISCOM2126EA-MA provides 24 10/100BaseT auto-sensing service ports and 2 SFP slots. It adopts industrial-advanced microchips and switching structure to ensure

carrier-class stability and dependability. ISCOM2126EA-MA contributes to extremely cost-effective solutions that are suitable for campus, enterprise, and residential community networks aggregation scenarios, helping carriers not only reduce Capital Expenditure but also Total Cost of Ownership.

Specifcation

Feature

Datasheet




www.sis-group.com


Security policy Device management access ACLUser classifcation and user name/password protectionSupport AAA & Radius & TACACS+ * authenticationSupport MAC address and port bindingPrevent DoS attackPort isolation and protection portPort-based IEEE802.1X authenticationSecure Shell (ssh * )

Management

Management and maintenance


Cluster management


OAM



Other features

L2/L3 SLA * commitment (frame delay, jitter and loss)

- Packet Loss- Frame Delay- Ethernet Jitter

Diagnostic Mornitoring of SFP

Supported

Ethernet Ring * Supported

PPPoE intermediate agent(PPPOE+) *



Supported

Working ambience


Storage ambience


Safety compliance

UL


IEEE802.1wIEEE802.1xIEEE802.3ahIEEE802.1agIEEE802.1adIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseT portsIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3ab 1000BaseTIEEE802.3z 1000BaseX1000BaseSX1000BaseLX/LH1000BaseZXRMON I and II standardsSNMPv1/v2c/v3

Compliance

* Optional feature

Ordering InformationPart number Description ISCOM2126EA-MA/AC Managed, 24*10/100BaseT+2*1000BaseFX Layer 2 Ethernet

Switch with AC power supply

ISCOM2126EA-MA/DC Managed, 24*10/100BaseT+2*1000BaseFX Layer 2 Ethernet Switch with DC power supply




www.sis-group.com













www.sis-group.com

ISCOM2126E-MA L2 Aggregation Switch


ISCOM2126E-MA Enhanced L2 Metro Ethernet Access

Switch



Port rate limiting Based on ingress and egress of each port, different increments at different rates










VLAN IEEE802.1Q, 4K active VLANFlexible QinQ






Management Feature





Management port

1 console (RJ45)



Port specifcation






Weight 3.5 KG


Power consumption


Working ambience


ISCOM2126E-MA acts as an enhanced aggregation Ethernet Switch, which can be network managed both locally and remotely. It is designed for Raisecom’s Carrier Ethernet portfolio. ISCOM2126E-MA provides 24 10/100BaseT auto-sensing service ports and 2 expansion slots, which are usually used to accommodate expansion modules equipped

with 100/1000BaseT/FX uplink ports. It adopts industrial-advanced microchips and switching structure to ensure carrier-class stability and dependability. ISCOM2126E-MA contributes to extremely cost-effective solutions that are suitable for campus, enterprise, and residential community networks aggregation scenarios, helping carriers not only reduce Capital Expenditure but also Total Cost of Ownership.

Specifcation

Feature

Datasheet




www.sis-group.com


Cluster management







Advanced feature Strict Priority (SP), Weighted Round Robin (WRR), SP+WRR


QoS & ACL Up to 4 output queuesSupport IEEE802.1p and TOS/DSCP PRI remarkSupport L2 - L4 packet ftering based on source MAC address, destination MAC address, source IP address, destination IP address, port, protocol, VLAN, VLAN range, MAC address range and illogical frames.




Support

Storage ambience


Safety compliance

UL


IEEE802.1wIEEE802.1xIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseT portsIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3ab 1000BaseTIEEE802.3z 1000BaseX1000BaseSX1000BaseLX/LH1000BaseZXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2126E-MA/AC Manageable intelligent layer-2 switch with AC power supply

ISCOM2126E-MA/DC Manageable intelligent layer-2 switch with DC power supply

















www.sis-group.com

ISCOM2126E-MA L2 Aggregation Switch


ISCOM2126E-MA Enhanced L2 Metro Ethernet Access

Switch



















Management Feature





Management port

1 console (RJ45)



Port specifcation






Weight 3.5 KG


Power consumption


Working ambience


ISCOM2126E-MA acts as an enhanced aggregation Ethernet Switch, which can be network managed both locally and remotely. It is designed for Raisecom’s Carrier Ethernet portfolio. ISCOM2126E-MA provides 24 10/100BaseT auto-sensing service ports and 2 expansion slots, which are usually used to accommodate expansion modules equipped

with 100/1000BaseT/FX uplink ports. It adopts industrial-advanced microchips and switching structure to ensure carrier-class stability and dependability. ISCOM2126E-MA contributes to extremely cost-effective solutions that are suitable for campus, enterprise, and residential community networks aggregation scenarios, helping carriers not only reduce Capital Expenditure but also Total Cost of Ownership.

Specifcation

Feature

Datasheet




www.sis-group.com


Cluster management







Advanced feature Strict Priority (SP), Weighted Round Robin (WRR), SP+WRR






Support

Storage ambience


Safety compliance

UL


IEEE802.1wIEEE802.1xIEEE802.1sIEEE802.3ahIEEE802.1adIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseT portsIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3ab 1000BaseTIEEE802.3z 1000BaseX1000BaseSX1000BaseLX/LH1000BaseZXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2126E-MA/AC Manageable intelligent layer-2 switch with AC power supply

ISCOM2126E-MA/DC Manageable intelligent layer-2 switch with DC power supply

















www.sis-group.com

ISCOM2126F L2 Aggregation Switch


ISCOM2126F Enhanced L2 Metro Ethernet Access
















Management Feature




Cluster management




Management port

1 console (RJ45)



Port specifcation


Fixed port 24 SFP (100BaseFX)2 SFP (1000BaseFX)2 (10/100/1000Base-T)



Weight 3.37 KG


Power consumption


Working ambience


ISCOM2126F acts as an enhanced aggregation Ethernet Switch, which can be network managed both locally and remotely. It is designed for Raisecom’s Carrier Ethernet portfolio. ISCOM2126F provides 24 SFP-accommodation ports and 2 Gigabit uplink ports., which are for 100/1000BaseT or SFP uplink ports. It adopts industrial-advanced microchips and switching structure to ensure

carrier-class stability and dependability. ISCOM2126F contributes to extremely cost-effective solutions that are suitable for campus, enterprise, and residential community networks aggregation scenarios, helping carriers not only reduce Capital Expenditure but also Total Cost of Ownership.

Specifcation

Feature

Datasheet




www.sis-group.com

Raisecom Technology Co., Ltd.Download and upgrade







Maintenance Support debug information print, Support PING (Packet Internet Groper)Support Telnet client

Storage ambience


Safety compliance

UL


IEEE802.1wIEEE802.1xIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseT portsIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3ab 1000BaseTIEEE802.3z 1000BaseX1000BaseSX1000BaseLX/LH1000BaseZX100BASE-BX (SFP)100BASE-FX (SFP)100BASE-LX (SFP)1000BASE-BX (SFP)1000BASE-SX (SFP)1000BASE-LX/LH (SFP)1000BASE-ZX (SFP)RMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2126F-AC/S Manageable intelligent aggregation layer-2 switch, 24*100M SFP hosting slots, 2*1000M fxed Ethernet electrical ports and 2*1000 SFP hosting slots, 115V or 230V single AC power supply

ISCOM2126F-AC/D Manageable intelligent aggregation layer-2 switch, 24*100M SFP hosting slots, 2*1000M fxed Ethernet electrical ports and 2*1000 SFP hosting slots, 115V or 230V redundancy AC power supply

ISCOM2126F-DC/S Manageable intelligent aggregation layer-2 switch, 24*100M SFP hosting slots, 2*1000M fxed Ethernet electrical ports and 2*1000 SFP hosting slots, -48V single DC power supply

ISCOM2126F-DC/D Manageable intelligent aggregation layer-2 switch, 24*100M SFP hosting slots, 2*1000M fxed Ethernet electrical ports and 2*1000 SFP hosting slots, -48V redundancy DC power supply

USFP-03/M 155M, Transmission distance: 2km, Dual-strand fber, multi mode, 1310nm, General optical SFP module

USFP-03/S1 155M, Transmission distance: 15km, Dual-strand fber, single mode, 1310nm, General optical SFP module


USFP-03/S3 155M, Transmission distance: 80km, Dual-strand fiber, single mode, 1310nm, General optical SFP module

USFP-03/SS13 155M, Transmission distance: 15km, Single-strand fiber, single mode, 1310nmTX, General optical SFP module




USFP-GB/M 1.25G, Transmission distance: 0.55km, Dual-strand fiber, multi mode, 850nm, General optical SFP module

USFP-GB/S1 1.25G, Transmission distance: 15km, Dual-strand fiber, single mode, 1310nm, General optical SFP module



USFP-GB/SS13 1.25G, Transmission distance: 15km, Single-strand fiber, single mode, 1310nmTX, General optical SFP module





www.sis-group.com

ISCOM2126FL L2 Aggregation Switch


ISCOM2126FL Enhanced L2 Metro Ethernet Access









Link aggregation Up to 3 trunk groups, 8*100M ports or 2*1000M ports in each trunkSupport load-sharing based on source MAC address, destination MAC address, and source + destination MAC address policies










Cluster management






Management port

1 console (RJ45)



Port specifcation

100BaseFX(SC fber connector) SFP (1000BaseFX)10BaseT (RJ45, Cat3/Cat4/Cat5 UTP)100BaseT (RJ45, Cat5 UTP)1000BaseT (RJ45, Cat5UTP)

Fixed port 24 100BaseFX(SC fber connector)2 combo (10/100/1000BaseTand 1000BaseFX autocrossover)

Expansion port 2 SFP (1000BaseFX)



Weight 5.37 KG


ISCOM2126FL acts as an enhanced aggregation Ethernet Switch, which can be network managed both locally and remotely. It is designed for Raisecom’s Carrier Ethernet portfolio. ISCOM2126FL provides 24 100BaseFX(SC fber connector) and 2 combo interfaces supporting 10/100/1000Base-T or 1000Base-FX. It adopts industrial-advanced microchips and switching structure to ensure

carrier-class stability and dependability. ISCOM2126FL contributes to extremely cost-effective solutions that are suitable for campus, enterprise, and residential community networks aggregation scenarios, helping carriers not only reduce Capital Expenditure but also Total Cost of Ownership.

Specifcation

Feature

Datasheet




www.sis-group.com





Advanced feature

QoS Up to 4 output queuesSupport IEEE802.1p and TOS/DSCP PRI remarkSupport SP, WRR and SP+WRR schedule mechanism




Support

Power consumption


Working ambience



IEEE802.1wIEEE802.1XIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseT portsIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3z 1000BaseX100BASE-FX1000BASE-SX1000BASE-LX/LH1000BASE-ZX1000BASE-BX (SFP)1000BASE-SX (SFP)1000BASE-LX/LH (SFP)1000BASE-ZX (SFP)RMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2126FL/AC/S Manageable intelligent layer-2 switch with single AC power supply

ISCOM2126FL/DC/S Manageable intelligent layer-2 switch with single DC power supply

ISCOM2126FL/AC/D Manageable intelligent layer-2 switch with redundancy AC power supply

ISCOM2126FL/DC/D Manageable intelligent layer-2 switch with redundancy DC power supply

USFP-GB/M Rate: 1.25G, Transmission distance: 0.55km, Dual-strand fber, multimode, 850nm, General optical SFP module

USFP-GB/S1 Rate: 1.25G, Transmission distance: 40km, Dual-strand fber, singlemode, 1550nm, General optical SFP module



USFP-GB/SS13 Rate: 1.25G, Transmission distance: 15km, Single-strand fber, singlemode, 1310nmTX, General optical SFP module


Typical Application 1




www.sis-group.com

ISCOM2126FL-MA L2 Aggregation Switch


ISCOM2126FL-MA Enhanced L2 Metro Ethernet

Access Switch



















Cluster management

Raisecom Neighbour Discover Protocol (RNDP)Raisecom Topology Discover Protocol (RTDP)Raisecom Cluster Management Protocol (RCMP)

Raisecom cluster network management program



Management port

1 console (RJ45)



Port specifcation


Fixed port 24 100BaseFX(SC fber connector)2 combo (10/100/1000BaseTand 1000BaseFX autocrossover)




Weight 3.5 KG


ISCOM2126FL-MA acts as an enhanced aggregation Ethernet Switch, which can be network managed both locally and remotely. It is designed for Raisecom’s Carrier Ethernet portfolio. ISCOM2126FL-MA provides 24 100BaseFX(SC fber connector) and 2 combo interfaces supporting 10/100/1000Base-T or 1000Base-FX. It adopts industrial-advanced

microchips and switching structure to ensure carrier-class stability and dependability. ISCOM2126FL-MA contributes to extremely cost-effective solutions that are suitable for campus, enterprise, and residential community networks aggregation scenarios, helping carriers not only reduce Capital Expenditure but also Total Cost of Ownership.

Specifcation

Feature

Datasheet




www.sis-group.com








Strict Priority (SP), Weighted Round Robin (WRR), SP+WRR





Support

Power consumption


Working ambience




Compliance


ISCOM2126FL-MA/AC/S Manageable intelligent layer-2 switch with single AC power supply

ISCOM2126FL-MA/DC/S Manageable intelligent layer-2 switch with single DC power supply

ISCOM2126FL-MA/AC/D Manageable intelligent layer-2 switch with redundancy AC power supply

ISCOM2126FL-MA/DC/D Manageable intelligent layer-2 switch with redundancy DC power supply

USFP-GB/M Rate: 1.25G, Transmission distance: 0.55km, Dual-strand fber, multimode, 850nm, General optical SFP module






Typical Application




www.sis-group.com

ISCOM2126S-MA L2 Aggregation Switch


ISCOM2126S-MA Enhanced L2 Metro Ethernet Access













VLAN IEEE802.1Q, 4K active VLANVLAN stacking (QINQ)



Management Feature




Cluster management




Management port

1 console (RJ45)



Port specifcation






Weight 3 KG


Power consumption


Working ambience


ISCOM2126S-MA acts as an enhanced aggregation Ethernet Switch, which can be network managed both locally and remotely. It is designed for Raisecom’s Carrier Ethernet portfolio. ISCOM2126S-MA provides 24 10/100BaseT auto-sensing service ports and 2 expansion slots, which are usually used to accommodate expansion modules equipped with 100/1000BaseT/FX uplink ports. It adopts

industrial-advanced microchips and switching structure to ensure carrier-class stability and dependability. ISCOM2126S-MA contributes to extremely cost-effective solutions that are suitable for campus, enterprise, and residential community networks aggregation scenarios, helping carriers not only reduce Capital Expenditure but also Total Cost of Ownership.

Specifcation

Feature

Datasheet




www.sis-group.com







Advanced feature






Storage ambience


Safety compliance

UL



Compliance


ISCOM2126S-MA/AC Manageable intelligent layer-2 switch with AC power supply

ISCOM2126S-MA/DC Manageable intelligent layer-2 switch with DC power supply

















www.sis-group.com

ISCOM2150-MA L2 Aggregation Switch


ISCOM2150-MA Enhanced L2 Metro Ethernet

Access SwitchForwarding mode Store-and-forward















Management Feature




Cluster management




Management port

1 console (RJ45)



Port specifcation






Weight 3.5 KG


Power consumption


Working ambience


Storage ambience


ISCOM2150-MA acts as an enhanced aggregation Ethernet Switch, which can be network managed both locally and remotely. It is designed for Raisecom’s Carrier Ethernet portfolio. ISCOM2150-MA provides 48 10/100BaseT auto-sensing service ports and 2 expansion SFP slots. It adopts industrial-advanced microchips and switching structure to ensure carrier-class stability and dependability.

ensure carrier-class stability and dependability.ISCOM2150-MA contributes to extremely cost-effective solutions that are suitable for campus, enterprise, and residential community networks aggregation scenarios, helping carriers not only reduce Capital Expenditure but also Total Cost of Ownership.

Specifcation

Feature

Datasheet




www.sis-group.com

Raisecom Technology Co., Ltd.Download and upgrade





Advanced feature

QoS Up to 4 output queuesSupport IEEE802.1p and TOS/DSCP PRI remark

ACL Support L2 - L7 packet fltering based on source MAC address, destinationMAC address, source IP address, destination IP address, port, protocol,VLAN, VLAN range, MAC address range and illogical frames.




Support

Safety compliance

UL



Compliance


ISCOM2150-MA/AC Manageable intelligent layer-2 switch with AC power supply

ISCOM2150-MA/DC Manageable intelligent layer-2 switch with DC power supply

USFP-03/M 155M, Transmission distance: 2km, Dual-strand fiber, multi mode, 1310nm,General optical SFP module

USFP-03/S1 155M, Transmission distance: 15km, Dual-strand fber, single mode,1310nm, General optical SFP module



USFP-03/SS13 155M, Transmission distance: 15km, Single-strand fber, single mode,1310nmTX, General optical SFP module




USFP-GB/M 1.25G, Transmission distance: 0.55km, Dual-strand fber, multi mode,850nm, General optical SFP module

USFP-GB/S1 1.25G, Transmission distance: 15km, Dual-strand fber, single mode,1310nm, General optical SFP module



USFP-GB/SS13 1.25G, Transmission distance: 15km, Single-strand fber, single mode,1310nmTX, General optical SFP module

USFP-GB/SS15 1.25G, Transmission distance: 15km, Single-strand fber, single mode,1550nmTX, General optical SFP module




www.sis-group.com

ISCOM2812GF Gigabit L2 Aggregation Fiber Switch


ISCOM2812GF Gigabit L2 Metro Ethernet Aggregation

Fiber SwitchForwarding mode Store-and-forward


Port rate limiting Based on ingress and egress of each port, 64K increment

Storm control Support storm control of broadcast, multicast and DLF according to PPS





Link aggregation Up to 6 trunk groups, 8 1000M ports in each trunk6 types of load-sharing based on MAC and IP address






Support BPDU, Dot1x, LACP, GMRP, GVRP, and GARP on per port

Management Feature




Cluster management







Advanced feature


Capacity 64MB SDRAM4MB fash32MB DDR Switch buffer16K MAC address1K IGMP groups

Management port

1 console (RJ45)



Port specifcation


Fixed port 4 combo (10/100/1000BaseT and 1000BaseFX auto crossover)8 SFP (1000BaseFX)

Indicators Power Supply, PWR1, PWR2System (fashing)

Indicators for optical ports

LNK, ACT

Indicators for electrical ports

LNK/ACT for each port

Dimension 442(W)*235(D)*1U(H)mm

Weight 5.5kg


Power consumption


ISCOM2812GF is an intelligent L2 aggregation Ethernet Switch equipped with 12 Gigabit fber ports. It has high-effcient L2 switching fabric that enables excellent wire-speed forwarding capability provision. Additionally, ISCOM2812GF is integrated with advanced Access Control List and bandwidth management policies for provisioning of fexible network construction, customized QoS, complete

network management and high dependability that perfectly satisfy carrier’s requirement. ISCOM2812GF is especially highlighted for its Q-in-Q function for enhanced user identifcation, and its pure fber access structure brings carriers with more effective and advanced solution for Metro Ethernet, community, campus, offce building and enterprise access aggregation.

Specifcation

Feature

Datasheet




www.sis-group.com

Raisecom Technology Co., Ltd.QoS Support CAR (Committed Access Rate) function at 1M increment

Up to 8 output queuesSupport 1K data fow queues at maximumVLAN ID replacement based on data fowSupport IEEE802.1p and DSCP PRI remarkSupport QoS Profle management, customized QoS proposalSupport re-mark function based on port ID, MAC address, VLAN, IEEE802.1p priority, diffServe amd IP TOS


Strict Priority (SP), Weighted Round Robin (WRR), Bounded delay and hybrid (SP + WRR) schedule

ACL Support L2 - L7 packet fltering based on source MAC address, destination MAC address, source IP address, destination IP address, port, protocol, VLAN, VLAN range, MAC address range and illogical frames.

Security policy Device management access ACLUser classifcation and user name/password protectionSupport AAA & Radius authenticationSupport MAC address and port bindingPrevent DoS attackSecure Shell (ssh)


Working ambience


Storage ambience


Safety compliance



IEEE802.1wIEEE802.1XIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseT portsIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3ab 1000BaseTIEEE802.3z 1000BaseX100BaseBX (SFP)100BaseFX (SFP)100BaseLX (SFP)1000BaseBX (SFP)1000BaseSX1000BaseLX/LH1000BaseZXRMON I and II standardsSNMPv1/v2c/v3

Compliance

Ordering InformationPart Number Description

ISCOM2812GF/AC/S Manageable intelligent aggregation layer-2 switch, 4 combo interfaces, support 10/100/1000Base-T and 1000Base-X auto crossover, 8*1000M SFP hosting slots, 115v or 230V single AC power supply

ISCOM2812GF/AC/D Manageable intelligent aggregation layer-2 switch, 4 combo interfaces, support 10/100/1000Base-T and 1000Base-X auto crossover, 8*1000M SFP hosting slots, 115v or 230V redundancy AC power supply

ISCOM2812GF/DC/S Manageable intelligent aggregation layer-2 switch, 4 combo interfaces, support 10/100/1000Base-T and 1000Base-X auto crossover, 8*1000M SFP hosting slots, -48V single DC power supply

ISCOM2812GF/DC/D Manageable intelligent aggregation layer-2 switch, 4 combo interfaces, support 10/100/1000Base-T and 1000Base-X auto crossover, 8*1000M SFP hosting slots, -48V redundancy DC power supply

USFP-GB/M Rate: 1.25G, Transmission distance: 0.55km, Dual-strand fiber, multi mode, 850nm, General optical SFP module

USFP-GB/S1 Rate: 1.25G, Transmission distance: 40km, Dual-strand fiber, single mode, 1550nm, General optical SFP module



USFP-GB/SS13 Rate: 1.25G, Transmission distance: 15km, Single-strand fiber, single mode, 1310nmTX, General optical SFP module


CSFP-GB/S Rate: 1.25G, transmission distance: 40km, CWDM SFP optical module

CSFP-GB/L Rate: 1.25G, transmission distance: 80km, CWDM SFP optical module




www.sis-group.com

ISCOM2824G L2 Intelligent Aggregation Switch


ISCOM2824G Enhanced L2 Metro

Ethernet Access


Max frame size Jumbo frame to 8192B

Port rate limiting Based on ingress and egress of each port or VLAN, 64K increment

Storm control Support storm control of broadcast, multicast and DLF according to port traffc percentage or PPS







MAC address table IEEE802.1d standard address learningMAC address learning function can be enabled/disable on each port16K MAC address, 100 static MAC addressSupport MAC address clear/search functionShow MAC address and MAC address stats function


VLAN IEEE802.1Q, double tagging (Q-in-Q), fexible Q-inQ, 4K active VLAN, vlan rewriting

Management Feature



Management SNMP/RMON/Raisecom iEMS NMSSupport log system and different alarm notifcation levels

Cluster management





Time management Time and zone management, summer time, SNTP


Advanced feature



Management port

1 console (RJ45)



Port specifcation

10/100/1000BASE-T 1000BASE-X

Fixed port 24 (10/100/1000BaseT)4 combo (1000BASE-X)

Expansion port N/A

Indicators Power SupplySystem (fashing)FDX for each portLINK/ACTIVE for each port


Weight 5.5 KG


Power consumption


Working ambience


Storage ambience

Temp: -25~65 centigrade

Safety compliance


ISCOM2824G is an enhanced intelligentaggregation Ethernet Switch that is designedas a part of Raisecom’s Carrier Ethernetportfolio. Based on Layer 2 Ethernet protocolstack, it provides complete wire-speed storeand-forward capabilities. Besides L2 switching, ISCOM2824G further incorporates ACL and bandwidth control policies to provide fexible networking, customized QoS, complete

network management, and high dependability that are called for by carrier’s. Specially, the Q-in-Q function of ISCOM2824G has provided more powerful user identifcation function for Ethernet access. It is particularly suitable for Metro Ethernet edge access and aggregation node for communities, campus, offce buildings, and enterprise end-users.

Specifcation

Feature




www.sis-group.com


QoS Support CAR (Committed Access Rate) function at 64K incrementUp to 8 output queuesSupport 1K data fow queues at maximumVLAN ID replacement based on data fowSupport IEEE802.1p and DSCP PRI remarkSupport QoS Profle management, customized QoS proposal




Security policy Device management access ACLUser classifcation and user name/password protection

Security policy Support AAA & Radius authenticationSupport MAC address and port bindingPrevent DoS attackSupport port isolation, protection portSecure Shell (ssh)



Support


IEEE 802.1wIEEE 802.3adIEEE802.1XSSHIEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T portsIEEE 802.1D Spanning Tree ProtocolIEEE 802.1p CoS PrioritizationIEEE 802.1Q VLANIEEE 802.3 10BASE-T specifcationIEEE 802.3u 100BASE-TX specifcationIEEE 802.3ab 1000BASE-T specifcationIEEE 802.3z 1000BASE-X specifcation100BASE-BX (SFP)100BASE-FX (SFP)100BASE-LX (SFP)1000BASE-BX (SFP)1000BASE-SX1000BASE-LX/LH1000BASE-ZXRMON I and II standardsSNMPv1, SNMPv2c, and SNMPv3

Compliance

Ordering Information Part number Description

ISCOM2824G/AC Manageable intelligent aggregation layer-2 switch, 24*10/100/1000MTx ports, four combo slots, 115V or 230V redundancy AC power supply

ISCOM2824G/DC Manageable intelligent aggregation layer-2 switch, 24*10/100/1000MTx ports, four combo slots, -48V redundant DC power supply

USFP-GB/M 1.25G, transmission distance 2km, multi mode SFP optical interface module

USFP-GB/S1 1.25G, transmission distance 25km, single mode SFP optical interface module


USFP-GB/SS13 1.25G, transmission distance 25km, single strand (1310nm) optical interface module

USFP-GB/SS15 1.25G , transmission distance 25km, single strand (1550nm) optical interface module






www.sis-group.com

ISCOM2826 Intelligent L2 Aggregation Switch


ISCOM2826 Intelligent L2 Metro Ethernet Aggregation

and Access Switch



Port rate limiting Based on ingress and egress of each port, 1M increment



In case a port is connected to a loop circuit, the port will be shut down automatically; the time of the loop circuit unchains is confgurable; The loop detection period is confgurable.



Link aggregation Up to 6 truck groups, 8 100M or 2 1000M ports in each trunk6 types of load-sharing based on MAC and IP address

Mirror Port-to-Multiport morroring, separately mirroring of ingress and egress traffc

MAC address table IEEE802.1D standard address learningMAC address learning function can be enabled/disable on each port8K MAC address, 100 static MAC addressSupport MAC address clear/search functionShow MAC address and MAC address stats. function


VLAN IEEE802.1Q VLAN; 4K VLAN


Support BPDU, LACP, 802.1x, GMRP, GVRP, and GARP on per port

Management Feature




Cluster management



Support X-modem and FTP upgrade in BOOTROM modeSupport uploading, upgrading system and confguration fles through FTP/TFTP



Error tolerance System error report, immediately recover in case of serious system error

Advanced feature


Capacity 32MB SDRAM4MB fash32MB (out of chip)+256KB (inside chip) DDR Switch buffer8K MAC address255 IGMP groups

Management port

1 console (RJ45)



Port specifcation

10BaseT (RJ45, Cat3/Cat4/Cat5 UTP)100BaseT (RJ45, Cat5 UTP)1000BaseT (RJ45, Cat5 UTP)100Base/1000Base-LX/BX/FX (SC fber connector, single/multi mode)


Extension port 2 (10/100/1000M auto-sensing electrical port, 100M port or 1000M optical port)



Weight 3.5kg


ISCOM2826 is an intelligent L2 aggregation and access Ethernet Switch which provides the highest available switching performance in Carrier class. Its high-effcient L2 switching fabric enables excellent wire-speed forwarding capability provision. Additionally, ISCOM2826 is integrated with advanced Access Control Listand bandwidth management policies for provisioning of fexible network construction,

customized QoS, complete network management and high dependability that perfectly satisfy carrier’s requirement. ISCOM2826 is especially highlighted for its Q-in-Q function for enhanced user identifcation.It is particularly suitable for Metro Ethernet edge access and aggregation node for communities, campus, offce buildings, and enterprise end-users.

Specifcation

Feature

Datasheet




www.sis-group.com


QoS Support CAR (Committed Access Rate) function at 1M incrementUp to 4 output queuesSupport 1K data fow queues at maximumSupport IEEE802.1p and DSCP PRI remarkSupport QoS Profle management, customized QoS proposalSupport re-mark function based on port ID, MAC address, VLAN, IEEE802.1p priority, diffServe amd IP TOS


Strict Priority (SP), Weighted Round Robin (WRR) and Bounded delay schedule modes

ACL Support L2 - L7 packet fltering based on source/destination MAC address, source/destination IP address, port, protocol, VLAN, VLAN range, MAC address range and illogical frames fltering.

Security policy ACL (Access Control List) functionUser classifcation and user name/password protectionSupport AAA & Radius authenticationSupport MAC address and port bindingPrevent DoS attackSupport SVL functionSecure Shell (ssh)


Power consumption


Working ambience


Storage ambience


Safety compliance

UL


IEEE802.1wIEEE802.1XIEEE802.3adIEEE802.3x full duplex on 10BaseT, and 1000BaseT portsIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3ab 1000BaseTIEEE802.3z 1000BaseX100BaseBX 100BaseFX100BaseLX 1000BaseBX 1000BaseSX1000BaseLX/LH1000BaseZXRMON I and II standardsSNMPv1/v2c/v3

Compliance


IISCOM2826/AC/S Intelligent, aggregated Ethernet switch, SNMP-management, 24*10/100M Tx ports, two expansion slots, 115V or 230V single AC power supply

ISCOM2826/AC/D IIntelligent, aggregated Ethernet switch, SNMP-management, 24*10/100M Tx ports, two expansion slots, 115V or 230V redundancy AC power supply

ISCOM2826/DC/S Intelligent, aggregated Ethernet switch, SNMP-management, 24*10/100M Tx ports, two expansion slots, -48V single DC power supply

ISCOM2826/DC/D Intelligent, aggregated Ethernet switch, SNMP-management, 24*10/100M Tx ports, two expansion slots, -48V redundancy DC power supply




SC200-FE-SS13 Expansion module, 1*100M Ethernet single strand optical interface, 25km






SC200-GE-S2 Expansion module, 1*1000M Ethernet optical interface, 60km (It must be customized)


SC200-GE-SS15 Expansion module, 1*1000Mbps optical interface, Single strand fber, Single mode, Dual WL 1550nmTx 1310nmRx, 0~20km





www.sis-group.com

ISCOM2826E L2 Intelligent Aggregation Switch


ISCOM2826E Enhanced L2 Metro

Ethernet AccessForwarding mode Store-and-forward

Max frame size Jumbo frame to 9KB

Port rate limiting Based on ingress and egress of each port or VLAN, 64K increment











Management Feature




Cluster management







Advanced feature



Management port

1 console (RJ45)



Port specifcation

10BaseT (RJ45, Cat3/Cat4/Cat5 UTP)100BaseT (RJ45, Cat5 UTP)1000BaseT (RJ45, Cat5 UTP)100Base/1000BaseLX/BX/FX (SC fber connector, single/multi mode)


Expansion port 2 (10/100/1000M autosensingelectrical port, 100Mport or 1000M optical port)



Weight 3.5 KG


ISCOM2826E is an enhanced intelligentaggregation Ethernet Switch that is designedas a part of Raisecom’s Carrier Ethernetportfolio. Based on Layer 2 Ethernet protocolstack, it provides complete wire-speed storeand-forward capabilities. Besides L2 switching, ISCOM2826E further incorporates ACL and bandwidth control policies to provide fexible networking, customized QoS, complete

network management, and high dependability that are called for by carrier’s. Specially, the Q-in-Q function of ISCOM2826E has provided more powerful user identifcation function for Ethernet access. It is particularly suitable for Metro Ethernet edge access and aggregation node for communities, campus, offce buildings, and enterprise end-users.

Specifcation

Feature




www.sis-group.com










Support

Power consumption


Working ambience




Compliance


ISCOM2826E/AC Manageable intelligent aggregation layer-2 switch, 24*10/100MTx ports, two expansion slots, 115V or 230V AC power supply

ISCOM2826E/DC Manageable intelligent aggregation layer-2 switch, 24*10/100MTx ports, two expansion slots, -48V redundant DC power supply


















www.sis-group.com

ISCOM2828 L2 Intelligent Aggregation Switch


ISCOM2828 Enhanced L2

Metro Ethernet Forwarding mode Store-and-forward








Link aggregation Up to 6 trunk groups, 8 100M ports or 4 1000M ports in each trunk


MAC address table IEEE802.1D standard address learningMAC address learning function can be enabled/disabled on each port16K MAC address, 100 static MAC addressSupport MAC address clear/search functionShow MAC address and MAC address stats function




Management SNMP/RMON groups MIB1, 2, 3, and 9/Raisecom iEMS NMSSupport log system and different alarm notifcation levels

Cluster management Raisecom Neighbour Discover Protocol (RNDP)Raisecom Topology Discover Protocol (RTDP)Raisecom Cluster Management Protocol (RCMP)Raisecom cluster network management program










Capacity 64MB SDRAM8MB fash32MB DDR Switch buffer16K MAC address255 IGMP groups

Management port

1 console (RJ45)



Port specifcation

10BaseT (RJ45, Cat3/Cat4/Cat5 UTP)100BaseT (RJ45, Cat5 UTP)1000Base-LX/BX/FX (LCfber connector, single/multimode)

Fixed port 24 (10/100BaseT)4 1000M SFP opticalmodules



FDXLINK/ACTIVE 10/100M


Weight 5.8 KG


Power consumption


Working ambience


ISCOM2828 is an intelligent L2 aggregation Ethernet Switch. It has high-effcient L2 store-and-forward structure that enabling excellent wire-speed switching capability. Additionally, ISCOM2828 is integrated with advanced Access Control List and bandwidth management policies for provisioning of fexible network construction, customized QoS, complete network management and high dependability that perfectly satisfy carrier’s requirements. Its

redundant carrier-class power supplies guarantee the most system uptime.ISCOM2828 is especially highlighted for its Q-in-Q function for enhanced user identifcation, and its pure fber access structure brings carriers with more effective and advanced solution for Metro Ethernet, community, campus, offce building and enterprise access aggregation.

Specifcation

Feature

Datasheet




www.sis-group.com

Raisecom Technology Co., Ltd.ACL Support L2 - L7 packet fltering based on source MAC address, destination

MAC address, source IP address, destination IP address, port, protocol, VLAN, VLAN range, MAC address range and illogical frames.

Security policy Device management access ACLUser classifcation and user name/password protectionSupport AAA & Radius authenticationSupport MAC address and port bindingPrevent from DoS attackSupport port isolation, protection portSecure Shell (ssh)IP Source GuardDynamic ARP Inspection


Storage ambience


Safety compliance




Compliance


ISCOM2828/AC Manageable intelligent aggregation layer-2 switch, 24*10/100M Tx ports, 4 SFP hosting slots, 115V or 230V single AC power supply

ISCOM2828/DC Manageable intelligent aggregation layer-2 switch, 24*10/100M Tx ports, 4 SFP hosting slots, -48V single DC power supply

















CSFP-GB/S 1.25G, transmission distance: 40km, CWDM SFP optical module

CSFP-GB/L 1.25G, transmission distance: 80km, CWDM SFP optical module




www.sis-group.com

ISCOM2828F L2 Intelligent Aggregation Fiber Switch





























Management port

1 console (RJ45)



Port specifcation

10BaseT (RJ45, Cat3/Cat4/Cat5 UTP)100BaseT (RJ45, Cat5 UTP)1000BaseT (RJ45, Cat5 UTP)100Base/1000Base-LX/BX/FX (LC fber connector,single/multi mode)

Fixed port 24 SFP (100BaseFX)2 SFP (1000BaseFX)2 (1000BaseT)





Weight 5.8 KG


Power consumption


ISCOM2828F is an intelligent L2 aggregation Ethernet Switch, which is equipped with 24 SFP-accommodation ports and 4 Gigabit uplink ports. It has high-effcient L2 store-and-forward structure that enabling excellent wire-speed switching capability. Additionally, ISCOM2828F is integrated with advanced Access Control List and bandwidth management policies for provisioning of fexible network construction, customized QoS, complete network management and high

dependability that perfectly satisfy carrier’s requirements. Its redundant carrier-class power supplies guarantee the most system uptime.ISCOM2828F is especially highlighted for its Q-in-Q function for enhanced user identifcation, and its pure fber access structure brings carriers with more effective and advanced solution for Metro Ethernet, community, campus, offce building and enterprise access aggregation.

Specifcation

Feature

Datasheet




www.sis-group.com



Security policy Device management access ACLUser classifcation and user name/password protectionSupport AAA & Radius authenticationSupport MAC address and port bindingPrevent from DoS attackSupport port isolation, protection portSecure Shell (ssh)


Working ambience


Storage ambience


Safety compliance




ComplianceOrdering Information Part number Description

ISCOM2828F/AC/S Manageable intelligent aggregation layer-2 switch, 24*100M SFP hosting slots, 2*1000M fxed Ethernet electrical ports and 2*1000 SFP hosting slots, 115V or 230V single AC power supply

ISCOM2828F/AC/D Manageable intelligent aggregation layer-2 switch, 24*100M SFP hosting slots, 2*1000M fxed Ethernet electrical ports and 2*1000 SFP hosting slots, 115V or 230V redundancy AC power supply

ISCOM2828F/DC/S Manageable intelligent aggregation layer-2 switch, 24*100M SFP hosting slots, 2*1000M fxed Ethernet electrical ports and 2*1000 SFP hosting slots, -48V single DC power supply

ISCOM2828F/DC/D Manageable intelligent aggregation layer-2 switch, 24*100M SFP hosting slots, 2*1000M fxed Ethernet electrical ports and 2*1000 SFP hosting slots, -48V redundancy DC power supply






















www.sis-group.com

ISCOM2852 Intelligent Aggregation Switch


ISCOM2852 Intelligent Metro Ethernet Aggregation

and Access SwitchForwarding mode Store-and-forward

Max frame size Jumbo frame 9000 Bytes

Port rate limiting Based on ingress and egress of each port, 64Kbps increment



In case a port is connected to a loop circuit, the port will be shut down automatically; the loop detection period is confgurable.



Link aggregation Up to 6 trunk groups, 8 100M or 4 1000M ports in each trunk6 types of load-sharing based on MAC and IP address




VLAN IEEE802.1Q VLAN; 4K active VLAN; Support Q-in-Q function



Management Feature




Cluster management







Advanced feature


Capacity 64MB SDRAM4/8MB fash32MB DDR Switch buffer16K MAC address1K IGMP groups

Management port

1 console (RJ45)



Port specifcation

10BaseT (RJ45, Cat3/Cat4/Cat5 UTP)100BaseT (RJ45, Cat5 UTP)1000Base-LX/BX/FX (LC fber connector, single/multi mode)

Fixed port 48 (10/100BaseT) 4 1000M SFP optical modules



Weight 8kg


Power consumption


Working ambience


Storage ambience


ISCOM2852 is an intelligent Fast Ethernet Switch which provides industry leading port density and power supply redundant for Metro Ethernet access and aggregation. Its high-effcient L2 switching fabric enables excellent wire-speed forwarding capability provision. ISCOM2852 is integrated with advanced Access Control List and bandwidth management policies for provisioning of fexible network

construction, customized QoS, complete network management and high dependability that perfectly satisfy carrier’s requirement. ISCOM2852 is especially highlighted for its Q-in-Q function for enhanced user identifcation.Its highest available switching performance with high density Ethernet ports is particularly suitable for Carrier Class Ethernet.

Specifcation

Feature

Datasheet




www.sis-group.com


QoS Support CAR (Committed Access Rate) function at 64Kbps incrementUp to 8 output queuesSupport VLAN ID replacement based on fowSupport 1K data fow queues at maximumSupport IEEE802.1p and DSCP PRI remarkSupport QoS Profle management, customized QoS proposalSupport re-mark function based on port ID, MAC address, VLAN, IEEE802.1p priority, diffServe and IP TOS




Security policy ACL (Access Control List) functionUser classifcation and user name/password protectionSupport AAA & Radius authenticationSupport MAC address and port bindingPrevent DoS attackSecure Shell (ssh)


Safety compliance

CEFCC Class A


IEEE802.1wIEEE802.1XIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTXIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3z 1000BaseX1000BaseBX 1000BaseSX1000BaseLX/LH1000BaseZXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2852/AC/S Manageable intelligent layer-2 aggregation switch with 48*10/100M Tx ports and 4*1000 SFP hosting slots, 115V or 230V single AC power supply

ISCOM2852/AC/D Manageable intelligent layer-2 aggregation switch with 48*10/100M Tx ports and 4*1000 SFP hosting slots, 115V or 230V redundancy AC power supply

ISCOM2852/DC/S Manageable intelligent layer-2 aggregation switch with 48*10/100M Tx ports and 4*1000 SFP hosting slots, -48V single DC power supply

ISCOM2852/DC/D Manageable intelligent layer-2 aggregation switch with 48*10/100M Tx ports and 4*1000 SFP hosting slots, -48V redundancy DC power supply












www.sis-group.com

ISCOM2924GF Gigabit Optical Aggregation Switch


ISCOM2924GF Intelligent Gigabit Optical Ethernet

Aggregation SwitchForwarding mode Store-and-forward

Max frame size 1536 Bytes, support Jumbo frame

Port rate limiting Based on ingress and egress of each port, 64kbps increment






Link aggregation Up to 6 trunk groups, 8 1000M ports in each trunk6 types of load-sharing based on MAC and IP address




VLAN IEEE802.1Q VLAN; 4K active VLAN; VLAN Swapping, Stacking (Q-in-Q) and Rewriting


BPDU, LACP, 802.1x, GMRP, GVRP, and GARP transparent transmission on assigned port

Management Feature




Cluster management







Advanced feature


Capacity 64MB SDRAM8MB fash512KB Bootrom2M Switch buffer16K MAC address1K IGMP groups

Management port

1 console (RJ45)



Port specifcation

1000Base-LX/BX/FX (LC fber connector, single/multi mode)10/100/1000Base-T

Fixed port 20 1000M SFP optical modules4 combo ports for 10/100/1000Base-T and 1000Base-X

Indicators Power Supply (PWR1, PWR2)System (fashing)LINK/ACTIVE for each port


Weight 6kg


Power consumption


Working ambience


ISCOM2924GF is an intelligent Gigabit Optical Ethernet Switch which provides 20 Gigabit optical SFP ports and 4 combo ports for Metro Ethernet access and aggregation. Its high-effcient L2 switching fabric enables excellent wire-speed forwarding capability provision. ISCOM2924GF is integrated with advanced Access Control List and bandwidth management policies for provisioning of fexible network

construction, customized QoS, complete network management and high dependability that perfectly satisfy carrier’s requirement. ISCOM2924GF is especially highlighted for its Q-in-Q function for enhanced user identifcation.Its highest available switching performance with Gigabit Optical Ethernet ports is particularly suitable for Carrier Class Ethernet.

Specifcation

Feature

Datasheet




www.sis-group.com


QoS Support CAR (Committed Access Rate) function at 64kbps incrementUp to 8 output queuesSupport VLAN ID replacement based on fowSupport 1K data fow queues at maximumSupport IEEE802.1p and DSCP PRI remarkSupport QoS Profle management, customized QoS proposalSupport re-mark function based on port ID, MAC address, VLAN, IEEE802.1p priority, diffServe amd IP TOS


Strict Priority (SP), Weighted Round Robin (WRR) and Hybrid mode (SP+WRR)


Security policy ACL (Access Control List) functionUser classifcation and user name/password protectionSupport AAA & Radius authenticationSupport MAC address and port bindingPrevent DoS (Denial of Service) attackSecure Shell (ssh)


Storage ambience


Safety compliance

CEFCC Class A


IEEE802.1wIEEE802.1XIEEE802.3adIEEE802.3x full duplex IEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3ab 1000BaseTIEEE802.3z 1000BaseX1000BaseBX 1000BaseLX1000BaseFXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2924GF-AC/S Manageable intelligent layer-2 aggregation switch with single AC power supply

ISCOM2924GF-AC/D Manageable intelligent layer-2 aggregation switch with redundancy AC power supply

ISCOM2924GF-DC/S Manageable intelligent layer-2 aggregation switch with single DC power supply

ISCOM2924GF-DC/D Manageable intelligent layer-2 aggregation switch with redundancy DC power supply

USFP-GB/M 1.25G, transmission distance 2km, multi mode SFP optical interface module




USFP-GB/SS13 1.25G, transmission distance 25km, single strand (1310nm) optical interface module

USFP-GB/SS15 1.25G , transmission distance 25km, single strand (1550nm) optical interface module






www.sis-group.com

ISCOM2926 Intelligent L2 Aggregation Switch


ISCOM2926 Intelligent L2 Metro Ethernet Aggregation

and Access SwitchForwarding mode Store-and-forward

MTU 1522 BytesSupport jumbo frame up to 9728 Bytes




In case a port is connected to a loop circuit, the port will be shut down automatically; the time of the loop circuit unchains is confgurable; The loop detection period is confgurable.







VLAN IEEE802.1Q VLAN; 4K active VLANVLAN Swapping, Stacking (Q-in-Q) and RewritingSupport service-based Q-in-Q



Management Feature




Cluster management







Capacity 64MB SDRAM8MB fash750KB Switch buffer8K MAC address1K IGMP groups

Management port

1 console (RJ45)



Port specifcation


Fixed port 24 (10/100BaseT) 2 1000Base-X SFP optical modules for uplink



Weight 3.5kg


Power consumption


Working ambience


Storage ambience


ISCOM2926 is an intelligent L2 aggregation and access Ethernet Switch which provides the highest available switching performance in Carrier class. Its high-effcient L2 switching fabric enables excellent wire-speed forwarding capability provision. Additionally, ISCOM2926 is integrated with advanced Access Control Listand bandwidth management policies for provisioning of fexible network construction,

customized QoS, complete network management and high dependability that perfectly satisfy carrier’s requirement. ISCOM2926 is especially highlighted for its service-based Q-in-Q function for enhanced user identifcation.It is particularly suitable for Metro Ethernet edge access and aggregation node for communities, campus, offce buildings, and enterprise end-users.

Specifcation

Feature

Datasheet




www.sis-group.com



Advanced feature

QoS Support CAR (Committed Access Rate) function at 1M incrementUp to 4 output queuesSupport 1K data fow queues at maximumSupport IEEE802.1p and DSCP PRI remarkSupport QoS Profle management, customized QoS proposalSupport re-mark function based on port ID, MAC address, VLAN, IEEE802.1p priority, diffServe amd IP TOS




Security policy ACL (Access Control List) functionUser classifcation and user name/password protectionSupport AAA & Radius authenticationSupport MAC address and port bindingPrevent DoS attackSupport SVL functionSecure Shell (ssh)

Safety compliance

UL


IEEE802.1wIEEE802.1XIEEE802.3adIEEE802.3x full duplex on 10BaseT, and 1000BaseT portsIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE802.3z 1000BaseXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM2926-AC Intelligent, aggregated Ethernet switch, SNMP-management, 24*10/100M Tx ports, two SFP hosting slots, 115V or 230V single AC power supply

ISCOM2826/DC Intelligent, aggregated Ethernet switch, SNMP-management, 24*10/100M Tx ports, two SFP hosting slots, -48V single DC power supply

USFP-GB/M Rate: 1.25G, Transmission distance: 0.55km, Dual-strand fber, multi mode, 850nm, General optical SFP module


USFP-GB/S2 Rate: 1.25G, Transmission distance: 80km, Dual-strand fber, single mode, 1550nm, General optical SFP module

USFP-GB/S3 Rate: 1.25G, Transmission distance: 40km, Dual-strand fber, single mode, 1550nm, General optical SFP module

USFP-GB/SS13 Rate: 1.25G, Transmission distance: 15km, Single-strand fber, single mode, 1310nmTX, General optical SFP module

USFP-GB/SS15 Rate: 1.25G, Transmission distance: 15km, Single-strand fber, single mode, 1550nmTX, General optical SFP module


CSFP-GB/L 1.25G, transmission distance: 80km, CWDM SFP optical moduleBossestasse 9, 06484 Quedlinburg,Deutschland



www.sis-group.com

ISCOM3012GF L3 Intelligent Aggregation Switch


ISCOM3012GF EnhancedL3 Metro Ethernet

Aggregation Switch









Link aggregation Up to 6 truck groups8 1000M ports in each trunk6 types of load sharing mode based on MAC and IP address




VLAN IEEE802.1QVLAN stacking (Q-in-Q)4K active VLAN



Cluster management







Routing protocol Support Static, RIP, OSPF routing protocolStatic routing: 1K, Host routing: 8K, Network routing: 64K



Management port

1 console (RJ45)



Port specifcation

10BaseT (RJ45, Cat3/Cat4/Cat5 UTP)100BaseTX (RJ45, Cat5 UTP)1000BaseT (RJ45, Cat5 UTP)100BaseLX/BX/FX (SC fber connector, single/multi mode)

Fixed port 4 combo (10/100/1000BaseT and 1000BaseFX auto crossover)8 SFP (1000BaseFX)

Expansion port N/A



Weight 5.8 KG

Power supply AC: 90~264V, 47~63Hz,DC: 36~72V

Power consumption


The ISCOM 3012GF is a Gigabit Ethernet Layer 3 Standalone switch featuring 8 SFP Gigabit Ethernet ports plus 4 combo Gigabit Ethernet RJ-45/SFP ports. The ISCOM 3012GF is ideal for use in the distribution layer of three-tier networks and provides long distance fber connections to aggregate access layer switches that are dispersed in different buildings. It is also an excellent choice as a core switch for small enterprises.

ISCOM 3012GF provides basic Static, Routing Information Protocol (RIP) and Open Shortest Path First (OSPF) routing capability, incorporate ACL and bandwidth control policies for providing fexible networking, customized QoS, complete network management and VLAN stacking (Q-in-Q) function for more powerful user identifcation function for Ethernet access while maintaining the simplicity of traditional LAN switching.

Specifcation

Feature




www.sis-group.com


QoS Support CAR (Committed Access Rate) function at 64K incrementUp to 8 output queuesSupport 128*12 data fow queues VLAN ID replacement based on data fowSupport IEEE802.1p and DSCP PRI remarkSupport QoS Profle management, customized QoS proposal


Strict Priority (SP), Weighted Round Robin (WRR) and SP+WRR






Support

Working ambience


Storage ambience



• IEEE 802.1w• IEEE802.1X• IEEE 802.3ad• IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports• IEEE 802.1D Spanning Tree Protocol• IEEE 802.1p CoS Prioritization• IEEE 802.1Q VLAN• IEEE 802.3 10BASE-T specifcation• IEEE 802.3u 100BASE-TX specifcation• IEEE 802.3ab 1000BASE-T specifcation• IEEE 802.3z 1000BASE-X specifcation• 100BASE-BX (SFP)• 100BASE-FX (SFP)• 100BASE-LX (SFP)• 1000BASE-BX (SFP)• 1000BASE-SX• 1000BASE-LX/LH• 1000BASE-ZX• RMON I and II standards• SNMPv1, SNMPv2c, and SNMPv3

Compliance

Ordering Information Part Number Description

ISCOM3012GF/AC/S Manageable intelligent aggregation layer-3 switch, 4 combo interfaces, support 10/100/1000Base-T and 1000Base-X auto crossover, 8*1000M SFP hosting slots, 115v or 230V single AC power supply

ISCOM3012GF/AC/D Manageable intelligent aggregation layer-3 switch, 4 combo interfaces, support 10/100/1000Base-T and 1000Base-X auto crossover, 8*1000M SFP hosting slots, 115v or 230V redundancy AC power supply

ISCOM3012GF/DC/S Manageable intelligent aggregation layer-3 switch, 4 combo interfaces, support 10/100/1000Base-T and 1000Base-X auto crossover, 8*1000M SFP hosting slots, -48V single DC power supply

ISCOM3012GF/DC/D Manageable intelligent aggregation layer-3 switch, 4 combo interfaces, support 10/100/1000Base-T and 1000Base-X auto crossover, 8*1000M SFP hosting slots, -48V redundancy DC power supply












www.sis-group.com

ISCOM3026 Layer-3 Ethernet Switch

Product Introduction ISCOM3026 is an intelligent layer-3 Ethernet Switch of Raisecom’s ISCOM series. It provides

100M and 1G wire-speed forwarding. ISCOM3026 merges user certification, abundant access control

and bandwidth management policies. Its flexible group network way, QoS, the characteristic access

control ability, perfect network management and high stability can meet the requirement of operating

network. It can be used as an aggregation layer device of station network for communities, enterprises,

schools, and carriers.

Product Features X X X X X Flexible Scalability

? Provide 24 10/100M auto-sensing Ethernet ports and 2 expansion slots. Support 3 kinds of

expansion module.

X X X X X Complete Security

? Provide access control of binding based on port, MAC, VLAN, IP, layer-4 protocol and the

number of protocol port. It can realize any kind of binding setting within the above conditions.

Provide more choices for administrators to constitute policy of access control.

? Support the function of restraining broadcast storm.

X X X X X QoS Guarantee

? Support QoS function based on 802.1p standard. Support 8 kinds of data priority and 4-

priority output queue. It can be set priority for data packet based on port, VLAN, MAC address and

IP address.

? Support 2 kinds of queue scheduling algorithm, strict priority scheduling, weighted priority

scheduling.

? Support bandwidth management based on port and VLAN. The range is from 1M to 100M

at the increment of 1M. Provide flexible and reasonable policy of bandwidth control.

X X X X X Perfect Route Function

? Support static routing, RIPv1/v2, OSPF, and DHCP RELAY.

X X X X X Convenient Management and Maintenance

? Support SNMP/RMON, Under SNMP network method, it can be managed from integra-

tive network management platform RC NVIEW of Raisecom.

? It supports out-of-band management through console port.

? It supports TFTP, FTP, TELNET, and provides on-line software upgrade.




www.sis-group.com

Performance Introduction

Performance ISCOM3026

Number of port 24*10/100M auto-sensing Ethernet ports

Number of expansion slots 2

Expansion module 1000M optical port/Ethernet port

100M optical port

Backboard switch capability 15.3G

MAC address capability 8K

Switch mode Wire-speed forwarding

Port aggregation 6 groups

Port mirroring Support

Auto MDI/MDIX Support

QoS Support

Restrain broadcast storm Support

Bandwidth control Range is from 1M to 100M with the increment of 1M

Flow control 802.3x, Back pressure

802.1Q VLAN Support 4k VLAN IDs

Port VLAN Support

GVRP Support

Access control list Support

Safety strategy

IGMP SNOOPING Support

Static routing Support

Dynamic routing RIP,OSPF

DHCP relay Support

Management method telnet, console, SNMP

Power consumption < 40W

Working Temp 0~50 degrees Centigrade

Humidity 5%~95% no condensing

EMC Meet the national corresponding standard

EMI >= 140dB m

Dimension 440*280*44.5 (mm)

Installation type 19”rack or desktop

Support any binding choice based on port, MAC,

VLAN, IP, protocol, port number of protocol




www.sis-group.com

APPLICATION

ISCOM3026 is the layer-3 Ethernet switch. It has route function, supporting

static routing, RIPv1/v2, OSPF, and DHCP RELAY. ISCOM3026 provides access con-

trol function for access users and business. The banding based on port, MAC, VLAN,

IP, layer 4 protocol and the number of protocol port. It can realize any kind of binding

setting. It prevents the steal of IP and MAC address. Through the binding, it also

limits the illegal access of physics port and VALN. ISCOM3026 can offer to network

administrator diversified visits control, and it guarantees the security of the network

in the source end. ISCOM3026 supports bandwidth management based on port and

VLAN, administrators can set bandwidth according to customer demand. ISCOM3026

has SNMP network management capability, almost all configurations can be set on

the network management platform, it is convenient to manage for administrators.

ISCOM3026 and all layer-2 switches of Raisecom support cluster management. The

function saves expensive IP address resource and the time of monitoring equipment

and debugging fault point. Administrators can simply add and reduce the switch of

cluster management area. The above application provides a cost-effective solution

for carriers.

Internet

ISCOM3026

ISCOM2826 ISCOM2126

ISCOM2026

ISCOM2016

ISCOM2016

ISCOM2008

Cluster Management




www.sis-group.com

ORDERING INFO

Part Number Description

ISCOM3026-AC Layer-3 switch with route capability, SNMP-management,15.3G

high backboard switch, 24*10/100M RJ45 ports, two expansion

slots, 115V or 230V AC

ISCOM3026-DC Layer-3 switch with route capability, SNMP-management,15.3G

high backboard switch, 24*10/100M RJ45 ports, two expansion

slots, -48V DC












www.sis-group.com

ISCOM3026E L3 Intelligent Aggregation Switch


ISCOM3026E EnhancedL3 Metro Ethernet

Aggregation Switch









Link aggregation Up to 6 truck groups8 100M ports in each trunk

Mirror Port-to-Multiport morroringseparate mirroring of ingress and egress traffc



VLAN IEEE802.1QVLAN stacking (Q-in-Q)4K active VLAN



Cluster management










Management port

1 console (RJ45)



Port specifcation

10BaseT (RJ45, Cat3/Cat4/Cat5 UTP)100BaseTX (RJ45, Cat5 UTP)1000BaseT (RJ45, Cat5 UTP)100BaseLX/BX/FX (SC fber connector, single/multi mode)


Expansion port 2 (10/100/1000M autosensingelectrical port, 100Mport or 1000M optical port)



Weight 3.5 KG

Power supply AC: 90~264V, 47~63Hz,DC: 36~72V

Power consumption


ISCOM3026E is a Layer 3 box-type wire-speed switch and features 24 10/100 RJ-45 ports and 2 slots for optional FE or GE modules that is designed as a part of Raisecom’s Carrier Ethernet portfolio. It provides basic Static, Routing Information Protocol (RIP) and Open Shortest Path First (OSPF) routing capability, and maintains the simplicity of traditional LAN switching. Besides these functions ISCOM3026E further incorporates ACL and bandwidth control policies to provide

fexible networking, customized QoS, complete network management and VLAN stacking (Q-in-Q) function to provide more powerful user identifcation function for Ethernet access.

ISCOM3026E is an ideal workgroup layer 3 switch, grouping users based on department, reducing traffc in separate departments from interfering with each other as well as providing routing between different vlans or subnets.

Specifcation

Feature




www.sis-group.com




Strict Priority (SP), Weighted Round Robin (WRR) and SP+WRR






Support

Working ambience


Storage ambience


Safety compliance

CE markingFCC Class AEN 55022: 1998EN 60950: 2000DIN EN 61000-3


• IEEE 802.1w• IEEE802.1X• IEEE 802.3ad• IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports• IEEE 802.1D Spanning Tree Protocol• IEEE 802.1p CoS Prioritization• IEEE 802.1Q VLAN• IEEE 802.3 10BASE-T specifcation• IEEE 802.3u 100BASE-TX specifcation• IEEE 802.3ab 1000BASE-T specifcation• IEEE 802.3z 1000BASE-X specifcation• 1000BASE-SX• 1000BASE-LX/LH• 1000BASE-ZX• RMON I and II standards• SNMPv1, SNMPv2c, and SNMPv3

Compliance


ISCOM3026E/AC Manageable intelligent aggregation layer-3 switch, 24*100M SFP hostingslots, two expansion slots, 115V or 230V AC power supply

ISCOM3026E/DC Manageable intelligent aggregation layer-3 switch, 24*100M SFP hostingslots, two expansion slots, -48V redundant DC power supply
















www.sis-group.com

ISCOM3028F L3 Intelligent Aggregation Fiber Switch





























Management port

1 console (RJ45)



Port specifcation

10BaseT (RJ45, Cat3/Cat4/Cat5 UTP)100BaseT (RJ45, Cat5 UTP)1000BaseT (RJ45, Cat5 UTP)100Base/1000Base-LX/BX/FX (LC fber connector,single/multi mode)

Fixed port 24 SFP (100BaseFX)2 SFP (1000BaseFX)2 (1000BaseT)





Weight 5.8 KG


Power consumption


ISCOM3028F is an intelligent L3 aggregation Ethernet Switch, which is equipped with 24 SFP-accommodation ports and 4 Gigabit uplink ports. It provides basic Static, Routing Information Protocol (RIP) and Open Shortest Path First (OSPF) routing capability, and maintains the simplicity of traditional LAN switching. Besides these functions ISCOM3028F further incorporates ACL and bandwidth control policies to provide fexible

networking, customized QoS, completenetwork management and VLAN stacking(Q-in-Q) function to provide more powerful useridentifcation function for Ethernet access.ISCOM3028F is an ideal workgroup layer 3switch, grouping users based on department,reducing traffc in separate departments frominterfering with each other as well as providingrouting between different vlans or subnets.

Specifcation

Feature

Datasheet




www.sis-group.com



Security policy Device management access ACLUser classifcation and user name/password protectionSupport AAA & Radius authenticationSupport MAC address and port bindingPrevent from DoS attackSupport port isolation, protection portSecure Shell (ssh)



Working ambience


Storage ambience


Safety compliance




Compliance


ISCOM3028F-AC/D Manageable intelligent aggregation layer-3 switch, 24*100M SFP hosting slots, 2*1000M fxed Ethernet electrical ports and 2*1000 SFP hosting slots, 115V or 230V redundancy AC power supply

ISCOM3028F-DC/D Manageable intelligent aggregation layer-3 switch, 24*100M SFP hosting slots, 2*1000M fxed Ethernet electrical ports and 2*1000 SFP hosting slots, -48V redundancy DC power supply

ISCOM3028F-AC/S Manageable intelligent aggregation layer-3 switch, 24*100M SFP hosting slots, 2*1000M fxed Ethernet electrical ports and 2*1000 SFP hosting slots, 115V or 230V single AC power supply

ISCOM3028F-DC/S Manageable intelligent aggregation layer-3 switch, 24*100M SFP hosting slots, 2*1000M fxed Ethernet electrical ports and 2*1000 SFP hosting slots, -48V single DC power supply


















www.sis-group.com

ISCOM3052 Intelligent Aggregation Switch


ISCOM3052 Intelligent Metro Ethernet Aggregation


Max frame size Jumbo frame 8000 Bytes

Port rate limiting Based on ingress and egress of each port, 64k increment










VLAN IEEE802.1Q VLAN; 4K active VLAN; Support Q-in-Q function



Management Feature




Cluster management







Advanced feature


Capacity 64MB SDRAM4/8MB fash32MB DDR Switch buffer16K MAC address1K IGMP groups

Management port

1 console (RJ45)



Port specifcation


Fixed port 48 (10/100BaseT) 4 1000M SFP optical modules



Weight 8kg


Power consumption


Working ambience


Storage ambience


ISCOM3052 is an intelligent Fast Ethernet Switch which provides industry leading port density and power supply redundant for Metro Ethernet access and aggregation. Its high-effcient L2 switching fabric and L3 routing function enables excellent wire-speed forwarding capability provision. ISCOM3052 is integrated with advanced Access Control List and bandwidth management

policies for provisioning of fexible network construction, customized QoS, complete network management and high dependability that perfectly satisfy carrier’s requirement. ISCOM3052 is especially highlighted for its Q-in-Q function for enhanced user identifcation.Its highest available switching performance with high density Ethernet ports is particularly suitable for Carrier Class Ethernet.

Specifcation

Feature

Datasheet




www.sis-group.com


QoS Support CAR (Committed Access Rate) function at 1M incrementUp to 8 output queuesSupport VLAN ID replacement based on fowSupport 2K data fow queues at maximumSupport IEEE802.1p and DSCP PRI remarkSupport QoS Profle management, customized QoS proposalSupport re-mark function based on port ID, MAC address, VLAN, IEEE802.1p priority, diffServe and IP TOS




Security policy ACL (Access Control List) functionUser classifcation and user name/password protectionSupport AAA & Radius authenticationSupport MAC address and port bindingPrevent DoS attackSecure Shell (ssh)


Safety compliance

CEFCC Class A


IEEE802.1wIEEE802.1XIEEE802.3adIEEE802.3x full duplex on 10BaseT, 100BaseTXIEEE802.1D Spanning Tree ProtocolIEEE802.1p CoS PrioritizationIEEE802.1Q VLANIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE 802.3ab 1000BASE-T IEEE802.3z 1000BaseX1000BaseBX 1000BaseSX1000BaseLX/LH1000BaseZXRMON I and II standardsSNMPv1/v2c/v3

Compliance


ISCOM3052/AC/S Manageable intelligent layer-2 aggregation switch with 48*10/100M Tx ports and 4*1000 SFP hosting slots, 115V or 230V single AC power supply

ISCOM3052/AC/D Manageable intelligent layer-2 aggregation switch with 48*10/100M Tx ports and 4*1000 SFP hosting slots, 115V or 230V redundancy AC power supply

ISCOM3052/DC/S Manageable intelligent layer-2 aggregation switch with 48*10/100M Tx ports and 4*1000 SFP hosting slots, -48V single DC power supply

ISCOM3052/DC/D Manageable intelligent layer-2 aggregation switch with 48*10/100M Tx ports and 4*1000 SFP hosting slots, -48V redundancy DC power supply












www.sis-group.com

ethernet gersis gmbh ds

Documents

open shortest

parity1 stop

default password

debugging

weighted round

industry leading

16x10100m

egressingress