EU DECLARATION OF CONFORMITY

1. Product model: MSPF-M-A-10

2. Name and address of the manufacturer or his authorised representative:

MAGICSHOOT

Reigerstraat 110

2025 XG Haarlem

The Netherlands

www.magicshoot.nl

3. This declaration of conformity is issued under the sole responsibility of the manufacturer (or

installer).

4. Object of the declaration:

Equipment:

Powercable; International Extension Cord 16 A / 230VAC; constructed with: Titanex H07RN-F

3G1,5mm2 black cable and two connectors: Neutrik powerCON TRUE1 NAC3FX-W and Neutrik

NAC3MX-W.

Brand name: MagicShoot Cable

Model/type: MSPF-M-A-10

5. The object of the declaration described above is in conformity with the relevant Union

harmonisation legislation:

Low Voltage Directive (LVD) 2014/35/EU,

Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU,

Directive 2008/98/EC on waste (Waste Framework Directive)

6. References to the relevant harmonised standards used or references to the other technical

specifications in relation to which conformity is declared:

LVD: NEN 3140+A1

RoHS: EN 50581:2012

7. Signed for and on behalf of:

Manufacturer: MagicShoot (phone: +31 6 21220846 email: info@magicshoot.nl)

Place and date: Haarlem, 16-02-2017

Sitan van Sluis, Managing Director

International Extension Cord 16 A / 230VAC

Plug / end termination Neutrik NAC3FX-W / Neutrik NAC3MX-W Conductor size 3 x 1,5 mm2

Cable type / color / Nom. O.D. Titanex H07RN-F3G1.5 / black / 9,6 mm

Part Number MSPF-M-A-10

Length 10 m

Class I

Partnumbering information

(following Neutrik part numbering)

MagicShoot partnumber for ten meter cable: MSPF-M-A-10

User Manual

International Extension Cord (powercable)for 230VAC / 16A

Push and rotate the Neutrik connector NAC3MX-W in a corresponding contra connector or chassis-

part until the connector locks. Push yellow button and rotate until the connector unlocks, then pull

out the connector.

Technical Drawing

Is this drawing molded connectors are used. We use non-molded connectors assembled according

the assembly instructions on Neutrik see below.

Production/assembly information

Addition: we use cable end busses and a Knipex crimping tool: 97 53 04

Testing:

The cable is tested according to NEN3140:

- Visual inspection

- Measure electrical values of the cable:

Measurment device used: Nieaf-Smitt EasyPat 250V NEN3140 apparaattester Resistance protective layer (minimal: 1 MΩ) Resistance protective conductor ( maximal: 0,3Ω ) Max leaking current: 1mA