High performancecoatings

EuraBuild Performance

Accelerating performancein metal envelopes

High performancecoatings

Many architectural projects are constructed in harsh

environments. Metropolitan areas are often located

in coastal areas with high marine impact and urban

pollution. Also, building activity is high in geographical

areas with high UV intensity and sometimes even in

desert environments with extreme sand abrasiveness.

Ultimate performance

With a passion for color and in continuous pursuit of

technical performance we have developed our new

performance range for iconic projects located

in tough environments. A small number of widely

used colors in a coating set-up developed to

perfection. These finishes are not only high performing

on classic aspects like corrosion prevention and UV

stability, but a lot of attention is also put into reaching

ultimate results in solar- and light reflection.

EuraBuild PVDF 3L Protec+

The technical backbone of the Performance coating

range is the PVDF 3L set up. It offers high UV

protection, long warranty periods and potential use

across the globe.

Protec+ is our extra high build coating layer set up

for maximum durability.

Custom solutions

Custom coating optimization is possible for virtually

every environmental situation. Our EuramaxLab

architectural specification team is experienced in

finding solutions for very specific aspects, from the

vicinity of volcanoes to protection against bird feces.

Our most iconic example is probably the bright red

Ferrari Theme Park roof. A mind boggling combination

of an ultra bright red situated in a desert environment

at the coast of the Persian Gulf.

Tough environments

• Coastal / marine areas

• Urban metropolitan / air pollution

• High UV impact

• Humid / tropical

• High chemical load environments;

Industrial / volcano / airport

Specifications

• Aluminium thickness: 0.3 mm - 2.0 mm

• Standard coil width: up to 1.600 mm

• Maximum coil width: up to 2.600 mm

• Multiple aluminium alloys available

• Warranty indications are maximum warranty periods.

Final warranty is exclusively offered on individual

project basis.

• Install EuraBuild PVDF 3L panels in the same

direction to avoid color difference

• Order projects in one batch to avoid color difference

• Custom color and gloss (10 – 90 gloss units)

development possible

• Minimum Order Quantity: 500 m²

• Many other colors available on www.euramax.eu

Olympic Tennis Center I Hangzhou (CN)NBBJ Architects

EuraBuild PVDF 3L ProtecPure White ≈ RAL 9010

Standing Seam

High performance EuraBuild PVDF 3L is one

of the first product ranges in Europe awarded

with the ECCA premium certificate.

H i g h p e r f o r m a n c e

C o l o r p o r t f o l i o

EuraBuild PVDF 3L Protec+Pure White ≈ RAL 9010E-45-04-F-000456.30

EuraBuild PVDF 3L Protec+Light Grey ≈ RAL 7035E-45-04-F-004845.30

EuraBuild PVDF 3L Protec+Traffic White ≈ RAL 9016E-45-04-F-001531.30

EuraBuild PVDF 3L Protec+Silver Metallic ≈ RAL 9006E-45-04-F-004853.30

EuraBuild PVDF 3L Protec+Grey Aluminium ≈ RAL9007E-45-04-F-005137.30

EuraBuild PVDF 3L Protec+Gold Metallic ≈ 8640CE-45-04-F-002684.30

Coating Gloss

Units

Technical

Warranty

Period (yr)

100%

Rebate

Period (yr)

Aesthetic

Warranty

Period (yr)

Geogr.

Region

Application/ enviromental details

EuraBuild

PVDF 3L

FEVE

Protec+

10 - 90 25 ≥ 10 1, 2, 3 - Severe industrial- & metropolitan areas with pollution- Intense UV impact areas- Marine areas- Specific colors (e.g. RAL 3020 etc.) and gloss levels- Anti graffiti properties/ Very good dirt repellence- Protec+ extra high build coating layer set up

EuraBuild

PVDF 3L

Protec+

30 25 ≥ 10 1, 2, 3 - Severe industrial- & metropolitan areas with pollution- Intense UV impact areas- Marine areas- Specific colors (e.g. RAL 3020 etc.)- Good dirt repellence- Protec+ extra high build coating layer set up

Region 1

Region 2

Region 3

Region 2

Region 1

Definition of different climate zones:

Region 1. Regions at > 45° northern and southern latitudeRegion 2. Regions at > 30° northern and southern latitudeRegion 3. Regions at < 30° northern and southern latitude

EuramaxLab

The architectural specification team of Euramax is called

EuramaxLab. We support architects in specifying coated surfaces

and integrate our coating experience with the knowledge of our

partners fabricating cladding panels. EuramaxLab strives to provide

architects with a world of choice in metal envelope design.

EuramaxLab support services

• Custom coating development

• Custom color development

• Precision color matching

• Specification support

• Metal sampling

• Mock up service

• Network of panel manufacturers

Contact us for information or samples

+31(0)475 370 341 I max@euramax.eu

www.euramax.eu

Ferrari World I Abu Dhabi (UAE)Benoy Architects

EuraBuild PVDF 4L FEVEFerrari Red / Ferrari Silver

Standing Seam Roof / Single Skin Facade

Tocumen Panama Airport T2 (PAN)Foster + Partners

AnoMax PVDF 3L FEVE ProtecEuras C33 - Middle Bronze

Standing seam

Queen Alia International Airport | Amman (JO)Foster + Partners

EuraBuild PVDF 3LTitanium Grey Metallic

Standing seam

King Abdulaziz International Airport I Jeddah (SAU)Atkins Global

EuraBuild PVDF 3L FEVEClassic CopperStanding seam

Nanjing Lukou International Airport (CN)ADPIEuraBuild PVDF 3LPearl White SoftStanding seam

Hong Kong-Zhuhai-Macao Bridge Inspection Center (CN)Arup ArchitectsEuraBuild PVDF 3L ProtecSilver Metallic ≈ RAL 9006Standing Seam

Baiyun International Airport I Guangzhou (CN)April Yang Design StudioEuraBuild PVDF 3LSilver Metallic ≈ RAL 9006Aluminium Composite Panels / Standing Seam

Tianjin Olympic Center Stadium (CN)AXS SatowEuraBuild PVDF 3LSilver Metallic ≈ RAL 9006Honeycomb Panel

Euramax Coated Products

Industrieweg 6 | 6045 JG | Roermond

PO Box 29 | 6040 AA | Roermond

The Netherlands

T +31 (0)475 370 303

max@euramax.eu

www.euramax.eu

Disclaimer

The information contained herein (the “Information”) – including pictures, colours, descriptions, statements with regard to size, quality, availability and the like – is provided by Euramax Coated Products BV (“Euramax”) by way of non-binding information. Euramax makes no representations or warranties of any kind, express or implied, about the availability of products and/or the completeness, accuracy or reliability of the Information. Any reliance on the Information is at your own risk.

Colour samples are an indication of the (aesthetics of the) final product to be supplied. Due to the nature of the coating process measurable colour differences from the sample may occur. References to colour standards, such as RAL and Pantone, are an indication only and are solely used for ease of colour communication. No representations or warranties regarding the colour of the final products can be derived from a reference to a colour standard. The Information remains the property of Euramax.

All copyrights and/or other intellectual property rights in Information belong to Euramax. The contents of this Information are subject to amendment without notification.

This disclaimer is provided by Euramax Coated Products BV. We are registered in the Netherlands under company number 13013614. Please contact Euramax Coated Products BV for additional information or questions +31 475370303.