evaluation of ophthalmic preparation
TRANSCRIPT
Evaluation of Ophthalmic preparation
Supervised by :
Dr. Roshan IsaraniH.O.D of Pharmaceutics
Submitted by :Sunil SainiM.pharm. 1st sem.Pharmaceutics
Lachoo Memorial College of Science & Technology, Jodhpur (Rajasthan)
Evaluation is test of finish Parenteral product,that either these preparation are free from micro-organism or not.
Evaluation of the ophthalmic product is done by following tests:
1. Sterility Test
2. Clarity Test
3. Leaker Test
4. Metal particles in ophthalmic ointment
Drug product quality tests and drug product performance tests
Procedures and acceptance criteria for testing ophthalmic
preparations are divided into two categories:
those that assess general quality attributes, for example,
identification, potency, purity, (and impurities), sterility and
particulate matter.
those that assess in vitro product performance, i.e., dissolution
or drug release of the active drug substance from the drug
product.
Quality tests assess the integrity of the dosage form, whereas the
performance tests assess drug release and other attributes that
relate to in vivo drug performance.
Taken together, quality and performance tests assure the identity,
strength, quality , purity and efficacy of the drug product.
Drug Product Quality Tests—Universal Tests
Identification
Identification tests should establish the identity of the drug or
drugs present in the drug product and should discriminate
between compounds of closely related structures that are likely
to be present. Identity tests should be specific for the drug
substance(s) (e.g., infrared spectroscopy).
Assay
A specific and stability-indicating test should be used to determine
the strength (content) of the drug product.
pH
The pH and buffering capacity of an ophthalmic preparation are
probably of equal importance to proper preservation, since the
stability of most commonly used ophthalmic drugs is largely
controlled by the pH of their environment.
Osmolarity
In formulating ophthalmic preparations, it is more important to
consider the sterility, stability, and preservative aspects, and not
jeopardize these aspects to obtain a precisely isotonic solution.
In practice, the tonicity limits may range from 0.5%–5% sodium
chloride, equivalent to a range from about 171 mOsm/kg to
about 1711 mOsm/kg, without marked discomfort to the eye.
Bacterial Endotoxins
All injected ophthalmic drug products shall be prepared in a
manner designed to minimize bacterial endotoxins.
as defined in Bacterial Endotoxins Test and Pyrogen Test.
Uniformity of Dosage Units
This test is applicable for dosage forms packaged in single-unit
containers. Uniformity of dosage units typically is demonstrated
by one of two procedures: content uniformity or weight variation
Drug Product Quality Tests—Specific Tests
Viscosity
In the preparation of ophthalmic solutions a suitable thickening
agent is frequently added to increase the viscosity. Although they
reduce surface tension significantly, their primary benefit is to
increase the ocular contact time, thereby decreasing the drainage
rate and increasing drug bioavailability.
Viscosity for ophthalmic solutions is considered optimal in the range
of 15–25 cp
For testing procedures Viscosity—Capillary Viscometer Methods,
Rotational Rheometer Methods, and Rolling Ball Viscometer
Method
Drop Size
The volume of a drop is dependent on the physicochemical
properties of the formulation, particularly surface tension, the
design and geometry of the dispensing orifice, and the angle at
which the dispenser is held in relation to the receiving surface.
Drop sizes may typically range from 20–70 μL
References :
USP. USP 36–NF 31, Ophthalmic Ointments 771 . Rockville, MD: USP; 2013.
Vadlapudi AD, Patel A, Cholkar K, Mitra AK. Recent patents on emerging
therapeutics for the treatment of glaucoma, age related macular
degeneration and uveitis. Recent Patents Biomed Eng. 2012; 5(1):83–101.
Gaudana R, Ananthula HK, Parenky A, Mitra AK. Ocular drug delivery. AAPS
J. 2010; 12(3):348–360.
Gaudana R, Jwala j, Boddu SHS, Mitra AK. Recent perspectives in ocular
drug delivery. Pharm Res. 2009; 26(5):1197–1216.
Wilson CG, Zhu YP, Kurmala P, Rao LS, Dhillon B. Ophthalmic drug
delivery. In: Hillery AM, Lloyd AW, Swarbrick J. Drug Delivery and
Targeting. New York: Taylor & Francis; 2001:329–354.
Thank You