examcollection 200-101 vce

CISCO200-101

Interconnecting Cisco Networking Devices Part 2PDF

Question Answer

What is Cisco 200-101 Practice Exam……?

The Interconnecting Cisco Networking Devices Part 2 (ICND2) version 2 (200-101) is a 1-½ hour test with 50–60 questions and is associated with the CCNA Routing and Switching certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 2 (ICND2) version 2 course. The exam tests a candidate's knowledge and skills required to successfully install, operate, and troubleshoot a small to medium-size enterprise branch network. The exam includes topics on LAN switching technologies, IP routing technologies, IP services (FHRP, syslog, SNMP v2 and v3), troubleshooting, and WAN technologies.

http://www.examcollectionvce.com/vce-200-101.html


Information Of Cisco 200-101 Practice Exam….

Vendor CISCO

Certifications Interconnecting Cisco Networking Devices Part 2

Exam Name 200-101

Total Questions 149 Q&As

Duration 75 Minutes http://www.examcollectionvce.com/vce-200-101.html



Requirements to Achieve Interconnecting Cisco Networking Devices Part 2 Success

It is highly necessary to keep complete coherence with the subject in order to build a prospective career by getting Interconnecting Cisco Networking Devices Part 2 certification. In that case taking preparation through proper channel becomes extremely important. Our 200-101 solution offers complete guidance following proper and successive steps to achieve desired results to the tests involved in this sector. Our module 200-101 sample test materials would tremendously come in handy to infill confidence among aspiring 200-101 candidates. You would definitely gain immensely from our related Interconnecting Cisco Networking Devices Part 2 materials.




ExamcollectionVCE Is Here…

Examcollection have dumps for all top vendors including Cisco, Microsoft, CompTIA, EMC, Juniper, IBM, Oracle etc. Examcollection regularly update our products and provide updated braindumps with money back guarantee. Examcollection is now offering exam test engine with 100% passing guarantee. Buy examcollection 200-101 pdf or test engine and pass your exam easily. If you don't pass in your exam then we will refund your full money.


http://www.examcollectionvce.com/



Why ExamcollectionVCE Is better…

100% Money Back Guarantee

100% Latest examcollection 200-101 Dumps PDF & Test Engine

CCNA Routing and Switching Cisco 200-101 Questions and Answers

6 Months Cisco Exam VCE Update

MCQ's, Hotspot and Drag Drop.

100% Cisco 200-101 Exam Passing Guarantee




Question Answer of Cisco 200-101 Exam Dumps….

Question: 1

Refer to the exhibit.


Why has this switch not been elected the root bridge for VLAN1?

A. It has more than one interface that is connected to the root network segment.B. It is running RSTP while the elected root bridge is running 802.1d spanning tree.C. It has a higher MAC address than the elected root bridge.D. It has a higher bridge ID than the elected root bridge.

Answer: D





Question: 2





Which switch provides the spanning-tree designated port role for the network segment that services the printers?

A. Switch1B. Switch2C. Switch3D. Switch4

Answer: C


Question: 3





At the end of an RSTP election process, which access layer switch port will assume the discarding role?

A. Switch3, port fa0/1B. Switch3, port fa0/12C. Switch4, port fa0/11D. Switch4, port fa0/2E. Switch3, port Gi0/1F. Switch3, port Gi0/2

Answer: C


Question: 4





Given the output shown from this Cisco Catalyst 2950, what is the reason that interface FastEthernet 0/10 is not the root port for VLAN 2?

A. This switch has more than one interface connected to the root network segment in VLAN 2.B. This switch is running RSTP while the elected designated switch is running 802.1d Spanning Tree.C. This switch interface has a higher path cost to the root bridge than another in the topology.D. This switch has a lower bridge ID for VLAN 2 than the elected designated switch.

Answer: C





Question: 5

Which two of these statements regarding RSTP are correct? (Choose two.)

A. RSTP cannot operate with PVST+.B. RSTP defines new port roles.C. RSTP defines no new port states.D. RSTP is a proprietary implementation of IEEE 802.1D STP.E. RSTP is compatible with the original IEEE 802.1D STP.

Answer: B,E





Question: 6





Each of these four switches has been configured with a hostname, as well as being configured to run RSTP. No other configuration changes have been made. Which three of these show the correct RSTP port roles for the indicated switches and interfaces? (Choose three.)

A. SwitchA, Fa0/2, designatedB. SwitchA, Fa0/1, rootC. SwitchB, Gi0/2, rootD. SwitchB, Gi0/1, designatedE. SwitchC, Fa0/2, rootF. SwitchD, Gi0/2, root

Answer: A,B,F





Question: 7

Which port state is introduced by Rapid-PVST?

A. learningB. listeningC. discardingD. Forwarding

Answer: C





Question: 8

Which two states are the port states when RSTP has converged? (Choose two.)

A. discardingB. listeningC. learningD. forwardingE. disabled

Answer: A,D


Question: 9

Which three statements about RSTP are true? (Choose three.)

A. RSTP significantly reduces topology reconverging time after a link failure.B. RSTP expands the STP port roles by adding the alternate and backup roles.C. RSTP port states are blocking, discarding, learning, or forwarding.D. RSTP provides a faster transition to the forwarding state on point-to-point links than STP does.E. RSTP also uses the STP proposal-agreement sequence.F. RSTP uses the same timer-based process as STP on point-to-point links.

Answer: A,B,D





Question: 10

At which layer of the OSI model is RSTP used to prevent loops?

A. physicalB. data linkC. networkD. Transport

Answer: B

Quality and Value

100% Guarantee to Pass Exam

Answers Verified by Experts

Based on Real Exam Scenarios

24/7 Customer Support on Mail and Live Chat

100% Lowest Price Guarantee




examcollection 200-101 vce

Documents