experiment1 ohm's law project name:experiment1 ohm's law description: author:erteris...
TRANSCRIPT
Experiment1 Ohm's Law
Project Name: Experiment1 Ohm's Law
Description:
Author: ErtEris
Copyright:
Slide 1
Left click here, for parts selection
Left click here
Click on [Modelling Primitives] item
Click on [Modelling Primitives] item
Click on [Analog (SPICE)] item
Click on [Analog (SPICE)] item
Click on [RESISTOR] item
Click on [RESISTOR] item
Click on [OK] button
Click on [OK] button
Left click here for next component selection
Left click here
Click on [Simulator Primitives] item
Click on [Simulator Primitives] item
Click on [VSOURCE] item
Click on [VSOURCE] item
Click on [OK] button
Click on [OK] button
Left click here, for positioning DC source
Left click here
Click on [RESISTOR] item
Click on [RESISTOR] item
Left click here
Left click here
Right click here
Right click here
Select [Rotate ClockwiseNum--] menu
item
Select [Rotate Clockwise Num--] menu item
Left click here
Left click here
Left click here
Left click here
Left click here
Left click here
Left click here
Left click here
Double click here
Double click here
Click on [Voltage:] text box
Click on [Voltage:] text box
Type [X]
Type [X]
Click on [OK] button
Click on [OK] button
Double click here
Double click here
Click on [Resistance (Ohms):] text box
Click on [Resistance (Ohms):] text box
Click on [OK] button
Click on [OK] button
Click on [Terminals Mode] radio button
Click on [Terminals Mode] radio button
Click on [GROUND] item
Click on [GROUND] item
Left click here
Left click here
Left click here
Left click here
Left click here
Left click here
Click on [Current Probe Mode] radio button
Click on [Current Probe Mode] radio button
Left click here
Left click here
Double click here
Double click here
Click on [Name:] text box
Click on [Name:] text box
Type [I]
Type [I]
Click on [OK] button
Click on [OK] button
Click on [Graph Mode] radio button
This is simulation stage, that is circuit and input/output are
determined.
Click on [Graph Mode] radio button
Click on [DC SWEEP] item
The chosen "DC SWEEP" is one of the simulation type.
"Analogue is another simulation type which will be
seen in later examples.
Click on [DC SWEEP] item
Left click here
Left click here
Left click here
Left click here
Left click here
Left click here
Click on [Add Traces...] button
Click on [Add Traces...] button
Click on [Open] button
Click on [Open] button
Click on [I] item
Click on [I] item
Click on [OK] button
Click on [OK] button
Click on [Edit Graph...] button
Click on [Edit Graph...] button
Click on [Stop value:] text box
Click on [Stop value:] text box
Type [10]
Type [0]
Click on [OK] button
Click on [OK] button
Click on [Yes] button
Click on [Yes] button
Click on [Stop] button
Click on [Stop] button