explanations easy cut ii
TRANSCRIPT
Welcome to our internal presentation of the new „SCHUMACHER Cutting System
Easy Cut IIMähsystem 2010
Standart / Komfort / Premium
Cutting System „Eaesy Cut II“Eaesy Cut II“
• New shape of double and triple guard• New toothing and surface treatment of section
• New guiding roll „upper leading“• New screwing of knives - New 10-hole connector bar
• New shape of crop lifter
Guard1) New shape of upper finger part (double and triple guard)
- backwards compatibel with „old“ guard
3) Optimised welding of finger tips
2) Positive cut (all guards)
4) Lower finger part with square hole (all guards)
Guard
Advantage:
• Improved cut by positive cutting angle
• Improved flow of harvested goods by thinner middle bar(less blockage of guards)
• Using of hexagonal bolt or coach bolt
• Easy mounting due to upper screwing(anti-twist protection with coach bolt)
• Using of knives with upper screwing possible
Guard
Sections
Guard
1) Salt bath tempering (all sections in future)
2) New toothing „wave shape“
3) New surface treatment (powdering rsp. KTL / Colour DB 703)
4) Three holes for mounting
Advantage:
• Longer durability by salt bath tempering
• Improved cut of crop
• No „washing out“ of teeth by new shape(„Wave“)
• No hydrogen brittleness (powdering)
• Less breaking of sections and teeth
• Third hole for mounting to strengthen connector bar
Section
Crop lifter
Crop lifter
1) New shape of spring leg (bend)
„bend“Client specific marking possible!
Crop lifter
Advantage:
• Less usage of rivet joint
• Herewith more security against loss ofcrop lifter
(damage on/in combineis minimized)
ASX Standard
NEW
Guiding roll
Guiding roll1) Upper guiding roll (rotation with downside guiding roll)
lower
upper
4-hole distance plate(Flex-Header furthermore with 2-hole)
Rolls in rotation by 1ft
Advantage:
• Lower and upper guiding roll avoid „bending-to-front“of knife at higher speeds
• Less usage of sections and guards
• Less power needed for cutting
• Higher driving speed possible
Guiding roll
Knife
Knife
1)Knives screwed upsideOnly possible in connection with new guard!
2)Knife back with3 holes per section forconnector bar
3)Knife assembly: head- and middlepartsame, endpiece adjusted
4)Optional: strengthening strip for connector bar
Advantage:
• Easy change of sections, due to upper screwing of sections
• Improved fitting of connector bar with 10-foldscrewing
• Optional: Less breaking of connector bar by use ofstrengthening strip
Knife
New
Dates
Availability:
• Presentation at AgriTechnica (8.-14. November)
• From 2010 on the „New Cutting system“ will be available for popular cutting tables
• Mounting instructions will also be available frombeginning of 2010 on
Thank you very muchfor your attention !