export test case 20130926

test-case-exportPATHIDLABELWEIGHTDESCRIPTIONPRE_REQUISITECREATED_ONCREATED_BYACTIONEXPECTED_RESULTPanSystemTestCases511PanSystemTestCasesLOWPanSystemCases

Total No. of test cases:1081/18/13 12:47 PMadminTC_Jan07_2013TC_Jan07_2013PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4791700.10.10.001LOWOpen and closing the General Configuration dialog box3/1/13 4:54 PMadmin1) In Pansystem, go to Configuration -> General Tab

2) Click OK.1) General Configuration dialog should be displayed

2) Dialog box should be closed.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4792700.10.10.002LOWVerification of data directory path3/1/13 4:54 PMadmin1) Go to Configuration -> General tab.

2)Verify data directory path.

3) Remove the path from textbox and click on ok.1) General Configuration dialog should be displayed.

2)Path should be displayed by default as below:

"C:\Users\Admin\AppData\LocalLow"[windows 7 path]

3) Error message "Enter valid path name" should be displayedPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4796700.10.10.003LOWVerification of Type curve directory path3/4/13 10:33 AMadmin1) In General configuartion dialog verify type curve directory path.

2) Remove the path from textbox and click on ok.1)Path should be displayed by default as below:

"C:\Users\Admin\AppData\Roaming\Weatherford\PanSystem\typecurv"(Win 7)

2)Error message "enter valid path name" should be displayedPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4797700.10.10.004LOWReport directory path verification3/4/13 10:38 AMadmin1)Verify Report directory path.2)Remove the path from textbox and click on ok1) Path should be displayed by default as below: "C:\Users\Admin\AppData\Roaming\Weatherford\PanSystem\reports" (win 7)2) Error message "enter valid path name" should be displayedPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4798700.10.10.005LOWPaging directory path verification3/4/13 10:40 AMadmin1)Verify Paging directory path.2)Remove the path from textbox and click on ok1)Path should be displayed by default as below: "C:\Users\Admin\AppData\Roaming\Weatherford\PanSystem\temp"(Win 7)2)Error message "enter valid path name" should be displayedPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4799700.10.10.006LOWCustomer model directory path verification3/4/13 10:41 AMadmin1)Verify customer model directory path.2)Remove the path from textbox and click on ok1)Path should be displayed by default as below:"C:\Users\Admin\AppData\Roaming\Weatherford\PanSystem\models" (win 7)2)Error message "enter valid path name" should be displayedPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4800700.10.10.007LOWBrowsing of data directory path3/4/13 10:41 AMadmin1)Go to Configuration ->General tab.2)Click on Browse button behind the Data Directory path.3)Click on make a new folder1)General Configuration dialog should be dispalyed

2) 'Browse For Folder' dialog should be displayed

3) New folder should be createdPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4801700.10.10.008LOWBrowsing of type curve directory path3/4/13 10:46 AMadmin1)Go to Configuration ->General tab.2)Click on Browse button behind the type curve Directory path.3)Right click on newly created folder and rename it.1)General Configuration dialog should be dispalyed2) 'Browse For Folder' dialog should be displayed3) Folder should be renamed.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4802700.10.10.009LOWBrowsing of Report directory path3/4/13 10:46 AMadmin1)Go to Configuration ->General tab.2)Click on Browse button behind the Report Directory path.3)Right click on newly created folder and delete it.4) Click on OK Button.1)General Configuration dialog should be dispalyed2) 'Browse For Folder' dialog should be displayed3) Folder should be deleted.4) Browse for folder dialog should be closed.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4803700.10.10.010LOWBrowsing of Paging directory path3/4/13 10:46 AMadmin1)Go to Configuration ->General tab.2)Click on Browse button behind the Paging Directory path.3)Click on Cancel button.1)General Configuration dialog should be dispalyed


3) 'Browse For Folder' dialog should be closedPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4804700.10.10.011LOWBrowsing of customer model directory path3/4/13 10:54 AMadmin1)Go to Configuration ->General tab.2)Click on Browse button behind the Customer model Directory path.3)Click on Cancel button.1)General Configuration dialog should be dispalyed


3) 'Browse For Folder' dialog should be closedPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4805700.10.10.012LOWVerifying widow option on configuration tab3/4/13 11:00 AMadminGo to Configuration ->General tab.General Configuration dialog should be dispalyed4805700.10.10.012LOWVerifying widow option on configuration tab3/4/13 11:00 AMadminCheck Radio button Maximise on window pane and click on OK.Image should be Maximise in image pane.4805700.10.10.012LOWVerifying widow option on configuration tab3/4/13 11:00 AMadminCheck Radio button Tile Horizontal on window pane and click on OK.Image should be displayed in horizontal form in image pane.4805700.10.10.012LOWVerifying widow option on configuration tab3/4/13 11:00 AMadminCheck Radio button Tile cascade on window pane and click on OK.Image should be displayed in cascaded form in image pane.4805700.10.10.012LOWVerifying widow option on configuration tab3/4/13 11:00 AMadminCheck Radio button Tile vertical on window pane and click on OK.Image should be displayed in vertical form in image pane.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4809700.10.10.013LOWVerification of print contents3/4/13 11:37 AMadminGo to Configuration ->General tab.General Configuration dialog should be dispalyed4809700.10.10.013LOWVerification of print contents3/4/13 11:37 AMadminSelect Checkbox for Plot in Print Contents pane and click on OK.Plot image should be printed after selecting print option4809700.10.10.013LOWVerification of print contents3/4/13 11:37 AMadminSelect Checkbox for Model Results in Print Contents pane and click on OK.Model Results should be printed after selecting print option4809700.10.10.013LOWVerification of print contents3/4/13 11:37 AMadminSelect Checkbox for Quick Match in Print Contents pane and click on OK.Quick match result should be printed after selecting print option.4809700.10.10.013LOWVerification of print contents3/4/13 11:37 AMadminSelect Checkbox for Header/Footer in Print Contents pane and click on OK.Header/Footer should be printed after selecting print option.4809700.10.10.013LOWVerification of print contents3/4/13 11:37 AMadminSelect Checkbox for Line Results in Print Contents pane and click on OK.Line Results should be printed after selecting print option.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4817700.10.20.001LOWOpening and closing units editor dialog box3/4/13 1:07 PMadmin1) Go to Configuration -> Units -> Systems

2) Click on OK or Cancel Button1) Units Editor dialog should be displayed

2) Dialog box Units Editor should be closed.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4818700.10.20.002LOWUnit systems and type verification3/4/13 1:08 PMadmin1) Go to Configuration -> Units -> System

2) Verify different unit systems in unit system list box.

3) Verify different types of units in Type list box.1) Units editor dialog box should b displayed

2) Unit systems in unit system list box should be displayed

3) Different types of units in type list box should be displayed.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4819700.10.20.003LOWHighlighted unit system verification3/4/13 1:08 PMadmin1) In units editor dialog box,verify highlighted unit system and Type.1) Highlighted Unit System and Type should be displayed in Right Hand side panePanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4820700.10.20.004LOWSelecting and closing New System button3/4/13 1:09 PMadmin1) Go to Configuration -> units

2) Verify New System Button in right hand side pane.

3) Click on New system button.

4) Click on Cancel button in Create new unit system dialog box.1) Units editor dialog box should be displayed.

2) New system Button should be enabled

3) Create new unit system dialog box should be displayed.

4) Create new unit system dialog box should be closedPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4821700.10.20.005LOWAddition of unit system3/4/13 1:09 PMadmin1) On Units Editor dialog box Click on new System button.

2) Enter "New System Name" in in New system Name text box.Select System name from " Based On System" combo box.Click on OK.

3) Verify that added new unit system in Unit System list.1) Create New Unit System dialog should be displayed.

2) After entering the values Create New Unit System dialog box should be closed.

3) Newly added Unit System get highlighted in Unit System list box.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4823700.10.20.006LOWDelete system button3/4/13 2:34 PMadmin1) In Units editor dialog box,after adding new Unit System, verify delete System button on right hand side pane.1) Button Delete System should be enabled. Delete button should be disabled for default unitsPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4824700.10.20.007LOWDeletion of unit system3/4/13 2:35 PMadmin1) Click on Delete System button

2) Click on yes1) Delete System dialog box should be displayed.

2) Highlighted Unit System in Unit System list box should be deleted.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4825700.10.20.008LOWRemove all changes button functionality3/4/13 2:35 PMadmin1) In Units Editor dialog box, verify Remove all changes button.

2) Click on Remove all changes button.

3) Click on yes1) Remove all changes button should be enabled

2) Warning message should be displayed indicating "This will remove all changes that have made to the units database and restoring the original data base values."

3) All the values and changes made should be restored in Units Editor dialog box.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4826700.10.20.009LOWSelecting units tab3/4/13 3:40 PMadmin1) Go to Configuration -> Units -> Units

2) Click on OK or Cancel Button1) Units Editor dialog should be displayed

2) Dialog box Units Editor should be closed.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4827700.10.20.010LOWParameters and user unit verification3/4/13 4:57 PMadmin1) Go to Configuration -> Units -> Units

2) Verify different parameters in parameters combobox

3) Verify different types of user units in unit list box1) Unit Editor dialog box should be displayed

2) Parameters should be displayed in Parameters combobox

3) Different types of user units should be displayed in unit list box.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4829700.10.20.011LOWHighlighted parameter name verification3/5/13 9:29 AMadmin1) Go to Configuration -> Units -> Units

2) Highlight a Parameter name in parameter list box1) Units Editor dialog should be displayed

2) Highlighted parameter name should be displayed under Parameter Name on right hand side pane.Refer the snapshot.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4830700.10.20.012LOWHighlighted user unit verification3/5/13 9:30 AMadmin1) Go to Configuration -> Units -> Units

2) Highlight a user unit in user unit list box1) Units editor dialog box should be displayed

2) Highlighted user unit should be displayed under user unit field on right hand side pane.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4831700.10.20.013LOWLable verification on Units editor3/5/13 9:30 AMadmin1) Go to Configuration -> Units -> Units

2) Verify the field names on right hand side pane of units editor dialog.1) Units Editor dialog should be displayed

2) On right hand side pane following following columns should be dislayed:

1.Parameter Name

2. Base Unit

3. User Unit

4.Conversion

5.Precision

6.Multiply

7.Field Width

Buttons New unit,Delete Unit,Apply should be disabled for built in unitsPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4833700.10.20.014LOWVerification of new unit button3/5/13 9:30 AMadmin1) Go to Configuration -> units -> systems

2) Select New System button on right hand side pane.

3)Enter New system name in Create New Unit system dialog box and click on ok.

4) Go to Units tab on Units Editor dialog box1) Units Editor dialog box should be displayed

2) Create New Unit System dialog box should be opened.

3) New Unit button on right hand side pane should be enabled.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4834700.10.20.015LOWAddition of new unit3/5/13 9:30 AMadmin1) On Units Editor dialog in units tab, select new Unit button.

2) Select Parameter Name from Parameter Name combo box.

3) Enter New Unit Name.Click on OK.1) Craete New Unit dialog should be displayed.

2)parameter name should be selected.

3) new Unit should be highlighted on user unit list box.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4837700.10.20.016LOWDeletion of new unit3/5/13 11:02 AMadmin1) Go to Configuration -> Units -> Units

2) Select newly added unit from unit list box

3)Click on Delete Unit button1) Units Editor dialog box should be displayed

2) Newly added unit should be highlighted in unit list

3) Highlighted unit should be deleted.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4838700.10.20.017LOWAssigning unit system to the plot3/5/13 11:48 AMadmin1) Go to Configuration -> Units -> Units

2) Select Parameter from Parameter Name list box.

3) Select User unit from Unit list box

3) Click on Apply button.1) Units Editor dialog box should be displayed

2) Parameter should be selected from Parameter List box.

3) Unit should be selected from Unit list box.

4) Selected units system should be assigned to corresponding plots.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.40 Application Settings for Configuration4839700.10.40.001LOWOpening and closing application setings dialog3/5/13 11:58 AMadmin1) In Pansystem Go to Configuration -> Configuration -> Applicaltion Settings

2) Click on OK or cancel1) Application Settings dialog box should be displayed.

2) Application dialog box should be closedPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.40 Application Settings for Configuration4840700.10.40.002LOWParameters verification in application settings dialog3/5/13 11:58 AMadmin1) In Pansystem Go to Configuration -> Configuration -> Applicaltion Settings

2) Verify the following parameters on Application Settings dialog box.

1. Save pane preference on exit

2.Disable animation

3.Animation speed

4.Auto hide display

5.Always minimise the ribbon.1) Application Settings dialog box should be displayed.

2) Given Parameters should be displayed.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.40 Application Settings for Configuration4841700.10.40.003LOWUse default settings button functionality3/5/13 11:58 AMadmin1) In Application settings dialog box select use default settings button.

2) Click on ok1) Disable Animation checkbox should be checked

2) Dialog box should be closed.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.40 Application Settings for Configuration4842700.10.40.004LOWVerifying save pane preference functionality3/5/13 12:08 PMadmin1) In Application settings dialog box check Save Pane Preference on Exit

2) Click on Apply and OK.1) Selected check box should be checked

2) Application should save the preference of pane before exiting the application.After opening the application it should show same preference of pane.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.40 Application Settings for Configuration4843700.10.40.005LOWMinimise ribbon checkbox functionality3/5/13 12:08 PMadmin1) In Application settings dialog box select check box Always minimise the ribbon

2) Click on Apply and OK1) Check box should be checked

2) Menubar below the Configuration tab should be disabled.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.40 Application Settings for Configuration4844700.10.40.006LOWAnimation speed combobox functionality3/5/13 12:16 PMadmin1) In Application settings dialog verify animation speed combo box.

2) Click on OK1) Animation speed combo box should show three speeds fast,Medium and Slow

2) Dialog box should be closedPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.30 Gauge details Configuration4845700.10.30.001LOWOpening and closing the guage details dialog3/5/13 1:08 PMadmin1) Go to Configuration-> Configuaration -> Gauge details

2) Click on OK ar cancel1) Gauge details dialog should be displayed

2) Gauge details dialog should be closed.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.30 Gauge details Configuration4846700.10.30.002LOWDifferent parameter verification in gauge details3/5/13 1:08 PMadmin1) In gauge details dialog verify the different parameters to be displayed.1) Following different parameters should be displayed in gauge details dialog

1. Use classical calculation

2. Use gauge resolution and noise

3. Include gauge drift

4. Include gauge resolution

5. Include noise amplitude

6. Gauge typePanSystemTestCases/700 Configuration/700.10 Configuration/700.10.30 Gauge details Configuration4847700.10.30.003LOWGauge type combo box verification3/5/13 1:08 PMadmin1) In Gauge details dialog verify gauge type combobox.In gauge type combobox following items should be present:

1. Quartz crystal

2. Quartz Capacitance

3. Strain

4.MechanicalPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.30 Gauge details Configuration4848700.10.30.004LOWClassical calculation radio button verification3/5/13 1:19 PMadminIn gauge details dialog verify use classical calculation radio button.In gauge details dialog use classical calculation radio button should be checked by default.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.30 Gauge details Configuration4849700.10.30.005LOWGauge type default value3/5/13 1:21 PMadminIn gauge details dialog verify gauge type comboboxIn gauge details dialog by default value of gauge type should be not specifiedPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.30 Gauge details Configuration4850700.10.30.006LOWBase RInv on text box verification3/5/13 1:22 PMadmin1) In gauge details dialog verify Base RInv on text box value1) By default value of Base RInv text box should be 2PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.30 Gauge details Configuration4851700.10.30.007LOWAdd noise before resolution check box verification3/5/13 1:26 PMadmin1) In Gauge details dialog verify add noise before resolution check box1) Add noise before resolution check box should be disabled by defaultPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.30 Gauge details Configuration4852700.10.30.008LOWEnabling the add noise before resoultion checkbox3/5/13 1:28 PMadmin1) In Gauge details dialog check include gauge resolution and include noise amplitude check box1) Add noise before resolution checkbox should be enabledPanSystemTestCases/700 Configuration/700.10 Configuration/View48544.0.5.401LOWView tab verification3/5/13 1:32 PMadminGo to Configuration-> View tabFollowing icons should be displayed under view icon:

1.Overlay pressure

2.Mark points

3.Marker text

4.hide marker text

5.delete marker

6.tile vertical

7.tile horizontal

8.tile cascadePanSystemTestCases/700 Configuration/700.10 Configuration/View48554.0.5.402LOWHorizontal tab verification3/5/13 1:32 PMadmin1) In view tab select tile horizontal1) All windows in plot section should be dispalyed in horizontal orientationPanSystemTestCases/700 Configuration/700.10 Configuration/View48564.0.5.403LOWVertical tab verification3/5/13 1:32 PMadmin1) In View tab select tile vertical1) All windows in plot section should be dispalyed in vertical orientationPanSystemTestCases/700 Configuration/700.10 Configuration/View48574.0.5.404LOWCascade windows tab verification3/5/13 1:32 PMadmin1) In View tab select Cascade windows1) All windows in plot section should be dispalyed in cascaded formPanSystemTestCases/700 Configuration/700.10 Configuration/View48584.0.5.405LOWPlot verification in image pane3/5/13 1:59 PMadminOpen any model in pansysytem. Select plot from drop down list of workspaceSelected plot should be displayed in image panePanSystemTestCases/700 Configuration/700.10 Configuration/View48594.0.5.406LOWDifferent icons in image pane3/5/13 1:59 PMadmin1) In image pane of pan system open any plot

2) Verify the different icons displayed above the plot1) Plot should be dispalyed

2) Following icons should be displayed:

1. Print Graph

2.Copy to clip board

3. Export to image file

4. Edit display properties

5.Edit hardcopy properties

6.Edit image copy properties

7.Fonts

8.Data cursor

9. Select points in a box

10. zoom a box

11.Zoom back

12.zoom forward

13.zoom in

14 zoom out

15 zoom axes

16 axes scroll

17 data grid

18 resume original viewPanSystemTestCases/700 Configuration/700.10 Configuration/View48604.0.5.407LOWPrint icon verification3/5/13 1:59 PMadmin1) In image pane select icon print graph

2) click on ok after selecting printer1) Print window should be displayed

2) Selected image should be printedPanSystemTestCases/700 Configuration/700.10 Configuration/View48614.0.5.408LOWClip board icon verification3/5/13 1:59 PMadminIn Image pane select copy to clip board iconData should be copied on clipboard and can be pasted on any blank document. wordpad,notepad,ms wordPanSystemTestCases/700 Configuration/700.10 Configuration/View48634.0.5.410LOWDisplay properties icon verification3/5/13 1:59 PMadminIn image pane select edit display propertiesPlot display Colour Properties dialog should open to edit plot display properties.PanSystemTestCases/700 Configuration/700.10 Configuration/View48634.0.5.410LOWDisplay properties icon verification3/5/13 1:59 PMadminIn Edit display properties dialog verify different tabsIn edit display properties following tabs should be displayed:

1. other

2. pressure

3.derivativePanSystemTestCases/700 Configuration/700.10 Configuration/View48634.0.5.410LOWDisplay properties icon verification3/5/13 1:59 PMadminIn edit display colour properties verify the functionalities of apply and save button.1)In edit display colour properties dialog after editing the values in all three tabs , click on apply and save buttons.

2) Edited values should be replicated in image pane.PanSystemTestCases/700 Configuration/700.10 Configuration/View48634.0.5.410LOWDisplay properties icon verification3/5/13 1:59 PMadminIn edit plot display colour properties dialog verify font functionalityAfter selecting font button,Font Properties dialog should be displayed indicating different fonts to be selectedPanSystemTestCases/700 Configuration/700.10 Configuration/View48674.0.5.411LOWVerify hardcopy properties icon3/5/13 2:36 PMadminIn plot hardcopy colour properties dialog box verify different tabsFollowing different tabs should be present in dialog box:

1. other

2.pressure

3.derivativePanSystemTestCases/700 Configuration/700.10 Configuration/View48674.0.5.411LOWVerify hardcopy properties icon3/5/13 2:36 PMadminIn plot hardcopy colour properties dialog box verify functionality of save button1) After editing all the values in three tabs click on save button.

2) All the values are updated in hardcopy of plot imagePanSystemTestCases/700 Configuration/700.10 Configuration/View48674.0.5.411LOWVerify hardcopy properties icon3/5/13 2:36 PMadminIn plot hardcopy colour properties dialog box verify the functionality of font buttonAfter selecting font button font properties dialog box should be opened indiacating various fonts to be selected.PanSystemTestCases/700 Configuration/700.10 Configuration/View48704.0.5.412LOWVerify image icon properties3/5/13 2:38 PMadminIn image pane select the icon edit image copy properties.Plot image colour properties dialog box should be openedPanSystemTestCases/700 Configuration/700.10 Configuration/View48704.0.5.412LOWVerify image icon properties3/5/13 2:38 PMadminIn plot image copy colour properties dialog box verify the different tabs providedIn dialog box following tabs should be provided

1.other

2.pressure

3.derivativePanSystemTestCases/700 Configuration/700.10 Configuration/View48704.0.5.412LOWVerify image icon properties3/5/13 2:38 PMadminVerify the functionality of save button on plot image copy colour properties dialog boxAfter editing the values in all the tabs select save button.

All the edited values should be updated in image copy document.PanSystemTestCases/700 Configuration/700.10 Configuration/View48704.0.5.412LOWVerify image icon properties3/5/13 2:38 PMadminIn dialog verify the functionality of font button.Font properties dialog should be displayed indcating various fonts to selectPanSystemTestCases/700 Configuration/700.10 Configuration/View48774.0.5.413LOWVerify data cursor icon3/5/13 4:11 PMadminVerify data cursor icon in image pane.Data cursor should be displayed on image pane.PanSystemTestCases/700 Configuration/700.10 Configuration/View48784.0.5.414LOWVerify axes scroll icon3/5/13 4:20 PMadminVerify axes scroll icon on image paneAfter selecting axes scroll icon, axes should be scroll on image panePanSystemTestCases/700 Configuration/700.10 Configuration/View48794.0.5.415LOWVerify resume original view icon3/5/13 4:20 PMadminVerify resume original view icon on image paneAfter selecting resume original view icon, original view should be displayedPanSystemTestCases/700 Configuration/700.10 Configuration/View48804.0.5.416LOWVerify data grid icon3/5/13 4:24 PMadminVerify data grid icon on image paneAfter slecting data view icon, data view window should be displayedPanSystemTestCases/700 Configuration/700.10 Configuration/View48804.0.5.416LOWVerify data grid icon3/5/13 4:24 PMadminIn data view window verify Pressure temperature columnsIn Data view window pressure temperature columns should be displayed without any duplicate valuePanSystemTestCases/700 Configuration/700.10 Configuration/View48804.0.5.416LOWVerify data grid icon3/5/13 4:24 PMadminIn data view window verify the different tabs providedIn Data view window following different tabs are provided:

1. Go to Row

2. Find Value

3.Copy DataPanSystemTestCases/700 Configuration/700.10 Configuration/View48834.0.5.417LOWVerify go to row functionality in data grid3/6/13 11:23 AMadminVerify the functionality of Go to row tab in data view window1) Select Go to row tab

2) Go to Row Number dialog should be displayed showing range of rows in data grid that is 1st row and last row.PanSystemTestCases/700 Configuration/700.10 Configuration/View48834.0.5.417LOWVerify go to row functionality in data grid3/6/13 11:23 AMadminIn Go to row number dialog enter the row number between the given range and click on ok.Pointer should address corresponding row number in data gridPanSystemTestCases/700 Configuration/700.10 Configuration/View48854.0.5.418LOWVerify find value functionality in data grid3/6/13 11:48 AMadminVerify Find a value tab in data view.1) Select find value tab in data grid

2) Search from beginning check box should be checked by default.

3) that is Equal to radio button should be selected by default.

4) Maximum and minimum radio button should be disabledPanSystemTestCases/700 Configuration/700.10 Configuration/View48854.0.5.418LOWVerify find value functionality in data grid3/6/13 11:48 AMadminIn find a value dialog verify from column comboboxIn from column combobox all column names in data grid should be included without duplicate entriesPanSystemTestCases/700 Configuration/700.10 Configuration/View48854.0.5.418LOWVerify find value functionality in data grid3/6/13 11:48 AMadminVerify functionality of find button in find value dialog1) In find a value dialog select column name in from column combo box

2) Enter exact value in 'that is equal to' text box and click on find.

3) Pointer should display the position of the value on data gridPanSystemTestCases/700 Configuration/700.10 Configuration/View48884.0.5.419LOWVerify copy data functionality in data grid3/6/13 12:02 PMadminVerify copy data tab in data grid1) Select copy data tab in data grid

2) Copy options dialog should be displayed

3) Radio buttons copy selection and copy entire table should be dispalyedPanSystemTestCases/700 Configuration/700.10 Configuration/View48884.0.5.419LOWVerify copy data functionality in data grid3/6/13 12:02 PMadminVerify copy selection functionality

1) In data grid select selected number of rows.

2) In copy options dialog select copy selection radio button.

3) click on ok.1) Number of rows should be selected

2) Radio button should be selected

3) Selected number of rows should be copied and can be printed on word documentPanSystemTestCases/700 Configuration/700.10 Configuration/View48904.0.5.409LOWData grid icon verification3/6/13 12:05 PMadminVerify copy entire table functionality

1) In data grid select all number of rows.

2) In copy options dialog select copy entire table radio button.

3) click on ok.1) All number of rows should be selected

2) Radio button should be selected

3) All number of rows should be copied and can be printed on word documentPanSystemTestCases/600 Reports/600.10.10 Cover page4898600.10.10.001LOWOpening and closing report cover page3/6/13 1:30 PMadmin1) Go to Reports -> ReportsFollowing tab should be displayed under report tab:

1. cover page

2.configure

3.output

4.print

5.templatesPanSystemTestCases/600 Reports/600.10.10 Cover page4899600.10.10.002LOWReport cover page verification3/6/13 1:30 PMadminverify the cover page tab1)Select cover page tab on report section

2) Description and details columns present on report cover page tab window.PanSystemTestCases/600 Reports/600.10.10 Cover page4899600.10.10.002LOWReport cover page verification3/6/13 1:30 PMadminIn report cover page dialog select any row by pointer and start updating the row

Click on okSelected row should be updated

Report cover page dialog should be closedPanSystemTestCases/600 Reports/600.10.10 Cover page4901600.10.10.003LOWEdit Remarks button functionality3/6/13 1:30 PMadminverify edit remarks functionality on report cover page

1) In Report cover page select edit remarks button

2) Update the highlighted area and click on ok1)Edit Remarks dialog should be opened

2)Highlighted area should be updated and edit remarks dilaog should be closedPanSystemTestCases/600 Reports/600.10.10 Cover page4902600.10.10.004LOWHelp button functionality on report cover page3/6/13 1:30 PMadminVerify the help button functionality on Report cover page

1) Open the Report cover page dialog

2) Verify the help button on window

3)Click on the button1) Report cover page dialog should be opened

2) Help button should be displayed on window

3) Pansystem Help window should be openedPanSystemTestCases/600 Reports/600.10.30 Output Reports4903600.10.30.001LOWVerification of output icon functionality3/6/13 2:05 PMadminVerify the functionality of output

In Report section select tab out putsave as dialog should be opened to save the image in word doc.PanSystemTestCases/600 Reports/600.10.40 Print Reports4904600.10.40.001LOWVerification of print icon3/6/13 2:06 PMadmin1)In Report section select tab print

2)Verify the radio buttons on print report dialog1)Print report dialog should be displayed

2) Following radio buttons should be dispalyed:

1. Print report to text file(No graphics)

2.Print report to selected printerPanSystemTestCases/600 Reports/600.10.40 Print Reports4905600.10.40.002LOWVerification of print report to text file3/6/13 2:06 PMadminVerify the functionality of print report to text file

1) In Print report dialog select print report to text file

2) Click on Print button1) Radio button should be checked

2) Save as dialog should be opened which saves the report in .rpt formPanSystemTestCases/600 Reports/600.10.40 Print Reports4906600.10.40.003LOWVerification of print report to selected printer3/6/13 2:30 PMadminVerify the functionality of print report to selected printer

1) In Print report dialog select print report to selected printer radio button

2) Click on print1) Radio button should be checked

2)Print dialog should be opened to print the report on printerPanSystemTestCases/600 Reports/600.10.50 Templates Reports4907600.10.50.001LOWVerification of template icon3/6/13 2:35 PMadminVerify the templates icon in reports sectionIn templates icon following items should be included

1)Analysis.TPL

2)br.TPL

3)Complete.TPL

4)Deliver.TPL

5) Input.TPL

6)Quick.TPL

7)QuickAnl.TPL

8)QuickInp.TPLPanSystemTestCases/600 Reports/600.10.50 Templates Reports4907600.10.50.001LOWVerification of template icon3/6/13 2:35 PMadminSelect any one item from templates icon.Print Report should be displayedPanSystemTestCases/600 Reports/600.10.50 Templates Reports4909600.10.50.002LOW3/6/13 2:35 PMadminVerify the functionality of print report to text file from template icon



2) Save as dialog should be opened which saves the report in .rpt formPanSystemTestCases/600 Reports/600.10.50 Templates Reports4910600.10.50.003LOW3/6/13 2:35 PMadminVerify the functionality of print report to selected printer from template icon



2)Print dialog should be opened to print the report on printerPanSystemTestCases/600 Reports/600.10.20 Configure Reports4911600.10.20.001LOWOpening and closing configuration icon3/6/13 2:48 PMadminVerify the configure icon on reports tab

1) Select configure icon1)Configure report dialog should be displayedPanSystemTestCases/600 Reports/600.10.20 Configure Reports4912600.10.20.002LOWDifferent lable verification on configuration icon3/6/13 2:48 PMadminVerify the different lables on configure report dialogFollowing lables should be present on configure report dialog:

1)Input Data

2)Analysis Results

3)Deliverability results

4)Dataprep section

5)Analysis section

6)Deliverability section

7)Total size(including summary)PanSystemTestCases/600 Reports/600.10.20 Configure Reports4913600.10.20.003LOWDifferent buttons verification on configure report dialog3/6/13 2:48 PMadminVerify the different buttons provided on configure report dialogFollowing different buttons are provided on configure report dialog:

1. Load Template

2.Save template

3.Format

4.print

5.save

6.Edit LayoutPanSystemTestCases/600 Reports/600.10.20 Configure Reports4914600.10.20.004LOWPrint button functionality3/6/13 2:48 PMadminverify print functionality button on configure report dialog

1)select print button

2) Verify the radio buttons on print report window1) Print report dialog should be dispalyed

2) Following radio buttons should be dispalyed:

1. Print report to text file(No graphics)

2.Print report to selected printerPanSystemTestCases/600 Reports/600.10.20 Configure Reports4915600.10.20.005LOWPrint report to text file functionality3/6/13 2:48 PMadminVerify the functionality of print report to text file



2) Save as dialog should be opened which saves the report in .rpt formPanSystemTestCases/600 Reports/600.10.20 Configure Reports4916600.10.20.006LOWPrint report to selected printer functionality3/6/13 2:48 PMadminVerify the functionality of print report to selected printer



2)Print dialog should be opened to print the report on printerPanSystemTestCases/600 Reports/600.10.20 Configure Reports4917600.10.20.007LOWHelp button functionality on print report3/6/13 2:48 PMadminVerify the functionality of help button on print report windowHelp window should be opened after selecting help button.PanSystemTestCases/600 Reports/600.10.20 Configure Reports4918600.10.20.008LOWFormat button functionality3/6/13 2:49 PMadminVerify the functionality of format button

1) Select fromat button1) Given plot in the image pane should be reset.PanSystemTestCases/600 Reports/600.10.20 Configure Reports4919600.10.20.009LOWSave button functionality3/6/13 2:49 PMadminverify the functionality of save button

Select save button on configure report dialogChanges made in configuration report dialog should get savedPanSystemTestCases/600 Reports/600.10.20 Configure Reports4920600.10.20.010LOWHelp button functionality on configure report dialog3/6/13 2:49 PMadminVerify the help functionality of help button on configure report dialogHelp window of pansystem should be displayedPanSystemTestCases/600 Reports/600.10.50 Templates Reports4921600.10.50.004LOW3/6/13 2:56 PMadminVerify the Help button functionality on Print Report windowAfter selecting help button, help window should be displayedPanSystemTestCases/600 Reports/600.10.40 Print Reports4922600.10.40.004LOWHelp button functionality on print report dialog3/6/13 2:58 PMadminVerify the functionality of help button on print report windowHelp window should be opened after selecting help button.PanSystemTestCases/600 Reports/600.10.20 Configure Reports4924600.10.20.011LOWLoad template button functionality3/7/13 9:45 AMadminVerify the functionality of Load Template button.

1. Select Load template button on configure report dialog1)Dialog box opens to open the saved template on the machine in .TPL format.PanSystemTestCases/600 Reports/600.10.20 Configure Reports4925600.10.20.012LOWSave template button functionality3/7/13 9:45 AMadminVerify the functionality of save template

1) Select save template button on configure report dialog1) Dialog box save as opens to save the document in .TPL extensionPanSystemTestCases/600 Reports/600.10.20 Configure Reports4926600.10.20.013LOWEdit layout button functionality3/7/13 9:45 AMadmin1) In configure report dialog select edit layout button.

2) Click on ok1) Edit layout dialog should be displayed

2) Edit layout dialog should be closedPanSystemTestCases/600 Reports/600.10.20 Configure Reports4927600.10.20.014LOWEdit layout dialog verification3/7/13 9:46 AMadmin1)In edit layout dialog verify different sections provided1) Following sections are provided in edit layout dialog

1.Cover page

2. Report Header

3.Report FooterPanSystemTestCases/600 Reports/600.10.20 Configure Reports4928600.10.20.015LOWVerify cover page options3/7/13 9:46 AMadminIn Edit Layout dialog verify the contents of cover pageFollowing contents should be displayed incover page content:

1.Checkbox include cover page

2.checkbox include remarks

3.Edit cover page button

4.Edit Remarks buttonPanSystemTestCases/600 Reports/600.10.20 Configure Reports4928600.10.20.015LOWVerify cover page options3/7/13 9:46 AMadminIn Cover page verify the check boxesCheck boxes include cover page and include remarks should be selected bydefaultPanSystemTestCases/600 Reports/600.10.20 Configure Reports4928600.10.20.015LOWVerify cover page options3/7/13 9:46 AMadminDeselect the checkbox include cover pageButton edit cover page should be disabledPanSystemTestCases/600 Reports/600.10.20 Configure Reports4928600.10.20.015LOWVerify cover page options3/7/13 9:46 AMadminDeselct the checkbox Include remarksButton edit remarks should be disabledPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4929700.10.10.014LOWReservoir Fluid type verification3/7/13 10:45 AMadminIn General configuration dialog verify Default reservoir fluid type comboboxFolowing items should be included in Default reservoir fluid type combobox:

1. Oil

2. Gas

3.Condensate

4.WaterPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4930700.10.10.015LOWRadio buttons verification in Reporting pane3/7/13 10:45 AMadminverify the radio buttons in Reporting paneFollowing radion buttons should be present under reporting pane:

1. Print to a text file

2. Print to a selected printerPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4930700.10.10.015LOWRadio buttons verification in Reporting pane3/7/13 10:45 AMadminselect radio button print to a text file.Click on OK.Report should be printed on word document.PanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4930700.10.10.015LOWRadio buttons verification in Reporting pane3/7/13 10:45 AMadminselect radio button print to a selected printer.Click on OK.Report should be printed through printerPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4933700.10.10.016LOWRadio buttons under size pane3/7/13 11:16 AMadminIn General Configuration dialog,verify the radio buttons under size paneFollowing radio buttons should be present under size pane:

1. Screen Size

2.Fit to page

3.Full pagePanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4933700.10.10.016LOWRadio buttons under size pane3/7/13 11:16 AMadminSelect radio button full page.click on okThe size of the report printed should be full pagePanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4933700.10.10.016LOWRadio buttons under size pane3/7/13 11:16 AMadminSelect radio button screen size.click on okThe size of the report printed should be screen sizePanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4933700.10.10.016LOWRadio buttons under size pane3/7/13 11:16 AMadminSelect radio button fit to page.click on okThe size of the report printed should be fit to pagePanSystemTestCases/700 Configuration/700.10 Configuration/700.10.10 General Configuration4937700.10.10.017LOWVerification of help button functionality3/8/13 11:01 AMadminIn General configuration dialog select help buttonAfter selecting help button help dialog box should have to openedPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.30 Gauge details Configuration4938700.10.30.009LOWVerify help button functionality3/8/13 11:05 AMadminIn Gauge details dialog select help button.After selecting help button help dialog should have to be displayedPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.40 Application Settings for Configuration4939700.10.40.007LOWVerifying help button functionality3/8/13 11:07 AMadminIn application settings dialog box select help buttonAfter selecting help button help dialog should have to be opened.PanSystemTestCases/600 Reports/600.10.20 Configure Reports4940600.10.20.016LOWVerify edit cover page button functionality3/8/13 12:28 PMadminSelect check box include cover page on edit layout dialogCheckbox should be selectedPanSystemTestCases/600 Reports/600.10.20 Configure Reports4940600.10.20.016LOWVerify edit cover page button functionality3/8/13 12:28 PMadminSelect edit cover page buttonReport cover page dialog should be openedPanSystemTestCases/600 Reports/600.10.20 Configure Reports4940600.10.20.016LOWVerify edit cover page button functionality3/8/13 12:28 PMadminMake the corresponding changes on report cover page and click on okChanges should be replicated on report documentsPanSystemTestCases/600 Reports/600.10.20 Configure Reports4940600.10.20.016LOWVerify edit cover page button functionality3/8/13 12:28 PMadminSelct edit remarks button and make suitable changes and click ok.Edit remarks dialog should be displayed.Changes should be replicatedPanSystemTestCases/600 Reports/600.10.20 Configure Reports4940600.10.20.016LOWVerify edit cover page button functionality3/8/13 12:28 PMadminVerify help button functionality in edit cover page dialogHelp dialog should be displayed after seleting help buttonPanSystemTestCases/600 Reports/600.10.20 Configure Reports4941600.10.20.017LOWVerify edit remarks button functionality3/8/13 2:01 PMadminSelect checkbox include remarksCheckbox should be selectedPanSystemTestCases/600 Reports/600.10.20 Configure Reports4941600.10.20.017LOWVerify edit remarks button functionality3/8/13 2:01 PMadminSelct button edit remarksEdit remarks dialog should be displayedPanSystemTestCases/600 Reports/600.10.20 Configure Reports4941600.10.20.017LOWVerify edit remarks button functionality3/8/13 2:01 PMadminMake suitable changes in edit remarks dialog and click on okChanges should be replicated in report documentPanSystemTestCases/600 Reports/600.10.20 Configure Reports4941600.10.20.017LOWVerify edit remarks button functionality3/8/13 2:01 PMadminVerify help button in edit remarks dialogHelp dialog should be displayed afetr selecting the buttonPanSystemTestCases/600 Reports/600.10.20 Configure Reports4942600.10.20.018LOWReport header options verification3/8/13 2:16 PMadminVerify the options provided in report headerFollowing options are provided under report header section:

Line 1 containing Production Optimisation Systems

Line 2 containing Pansystem version

Line 3 containing Well Test Analysis Report

Checkboxes of show logo,show date,include headerPanSystemTestCases/600 Reports/600.10.20 Configure Reports4942600.10.20.018LOWReport header options verification3/8/13 2:16 PMadminDeselect the checkbox include headerLine1,Line2,Line3 and checkboxes show logo and show date should be disabledPanSystemTestCases/600 Reports/600.10.20 Configure Reports4942600.10.20.018LOWReport header options verification3/8/13 2:16 PMadminDeselect the checkbox show logoLogo should not be shown on reportPanSystemTestCases/600 Reports/600.10.20 Configure Reports4942600.10.20.018LOWReport header options verification3/8/13 2:16 PMadminDeselct the checkbox show dateDate should not be displayed on the reportPanSystemTestCases/600 Reports/600.10.20 Configure Reports4943600.10.20.019LOWReport footer contents functionality3/8/13 2:58 PMadminVerify the contents under report footer of edit layout dialogFollowing checkboxes should be displayed:

1.show page numbers

2.show footer box

3.show footer text

Text box should be displayed including the text Pansystem - Copyright(C)2008 Weatherford InternationalPanSystemTestCases/600 Reports/600.10.20 Configure Reports4943600.10.20.019LOWReport footer contents functionality3/8/13 2:58 PMadminDeselect the checkbox show footer texttext box showing footer text should be disabledPanSystemTestCases/600 Reports/600.10.20 Configure Reports4944600.10.20.020LOWSection area verification3/8/13 3:05 PMadminVerify the different sections under sectionsFollowing check boxes with edit button should be displayed:

1.Inputt data

2.Analysis results

3.Deliverability ResultsPanSystemTestCases/600 Reports/600.10.20 Configure Reports4944600.10.20.020LOWSection area verification3/8/13 3:05 PMadminDeselect the checkbox of input dataEdit button behind the check box should be disabledPanSystemTestCases/600 Reports/600.10.20 Configure Reports4944600.10.20.020LOWSection area verification3/8/13 3:05 PMadminDeselct the checkbox of analysis resultsEdit button behind the checkbox should be disabledPanSystemTestCases/600 Reports/600.10.20 Configure Reports4944600.10.20.020LOWSection area verification3/8/13 3:05 PMadminDeselect the checkbox deliverability resultsedit button behind the checkbox should be disabledPanSystemTestCases/600 Reports/600.10.20 Configure Reports4945600.10.20.021LOWInput data edit functionality3/8/13 3:12 PMadminSelect the edit button behind the input data checkbox in configure report dialogEdit input data contents dialog should be displayed.Following options should be diplayed:

1. Analytical Input

2.Data edit plot

3.Numerical inputPanSystemTestCases/600 Reports/600.10.20 Configure Reports4945600.10.20.021LOWInput data edit functionality3/8/13 3:12 PMadminVerify the checkboxes under Analytical inputFollowing checkboxes should be displayed under analytical input:

1. Include reservoir parameters

2.Include layer parameters

3.Include well parameters

4.Include fluid properties

5.Include boundary details

6.Include image well co-ords

7.Include master TPR data

8.Include Model parameters

9.Include P/U/Z table

10.Include U/ct table

11.Include m(p)table

12.Include observation point co-ords

13.Include quick match data

14.Include rate change dataPanSystemTestCases/600 Reports/600.10.20 Configure Reports4945600.10.20.021LOWInput data edit functionality3/8/13 3:12 PMadminVerify the checkboxes under data edit plotFollowing checkboxes should be displayed :

1. Include data edit plot

2.Include description box

3.Include marker text.

All these check boxes should be disabled bydefaultPanSystemTestCases/600 Reports/600.10.20 Configure Reports4945600.10.20.021LOWInput data edit functionality3/8/13 3:12 PMadminVerify Numerical input check boxCheck box should be displayed with edit numerical button disabledPanSystemTestCases/600 Reports/600.10.20 Configure Reports4945600.10.20.021LOWInput data edit functionality3/8/13 3:12 PMadminSelect master TPR buttonEdit report data file selection dialog should be displayedPanSystemTestCases/600 Reports/600.10.20 Configure Reports4945600.10.20.021LOWInput data edit functionality3/8/13 3:12 PMadminVerify edit report data file selection dialogFollowing contents should be displayed:

Well

test data

model

select column

commentsPanSystemTestCases/600 Reports/600.10.20 Configure Reports4945600.10.20.021LOWInput data edit functionality3/8/13 3:12 PMadmindeselect the coulmns from edit report data file selection and click on ok on edit input data contentsConfirm message should be displayed master TPR columns have not been selectedPanSystemTestCases/600 Reports/600.10.20 Configure Reports4945600.10.20.021LOWInput data edit functionality3/8/13 3:12 PMadminVerify the help button functionality under edit input data contentsHelp dialog should be displayed after selecting help buttonPanSystemTestCases/600 Reports/600.10.20 Configure Reports4947600.10.20.022LOWAnalysis results edit functionality3/8/13 3:12 PMadminSelect Analysis results edit boxFollowing sections should be displayed :

1. select plot

2. topics to includePanSystemTestCases/600 Reports/600.10.20 Configure Reports4947600.10.20.022LOWAnalysis results edit functionality3/8/13 3:12 PMadminVerify the checkboxes under topics to include sectionFollowing checkboxes should be displayed under topics to include:

1. Include Mini-frac Diagnostics calculations

2. Include Mini-frac Diagnostics presets


4.Include transformed data

5.Include line details

6.Include marker text

7.Include model results

8.Include time marks

9.Include simulated data

10.Include type curve details

11.Include quick match results

12.Include auto match statisticsPanSystemTestCases/600 Reports/600.10.20 Configure Reports4947600.10.20.022LOWAnalysis results edit functionality3/8/13 3:12 PMadminVerify the checkboxes under select plotFollowing checkboxes should be displayed under select plot

1. Test Overview plot

2.Log-log plotPanSystemTestCases/600 Reports/600.10.20 Configure Reports4947600.10.20.022LOWAnalysis results edit functionality3/8/13 3:12 PMadminVerify help button functionality under edit report analysis sectionHelp dialog should bedisplayed after selecting help buttonPanSystemTestCases/600 Reports/600.10.20 Configure Reports4948600.10.20.023LOWDeliverability results edit functionality3/8/13 3:13 PMadminVerify the section under edit deliverability contentsFollowing sections should be displayed:

select plot

Topics to includePanSystemTestCases/600 Reports/600.10.20 Configure Reports4948600.10.20.023LOWDeliverability results edit functionality3/8/13 3:13 PMadminVerify the checkboxes under select plotFollowing checkboxes should be displayed under select plot:

1.IPR plot

2.Production Rate

3.Production rate and cumulative productionPanSystemTestCases/600 Reports/600.10.20 Configure Reports4948600.10.20.023LOWDeliverability results edit functionality3/8/13 3:13 PMadminVerify the checkboxes under topics to include sectionFollowing checkboxes should be displayed:


2.Include deliverability dataPanSystemTestCases/600 Reports/600.10.20 Configure Reports4948600.10.20.023LOWDeliverability results edit functionality3/8/13 3:13 PMadminVerify help button under deliverability contents dialog.Help dialog should be displayed after selecting help button.PanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.10 Quick Match4954400.10.10.001LOWverify the quick match icon3/11/13 2:05 PMadminOpen any model.Example.panx

Go to Analysis ->Model selection -> model

Select reservoir model

Go to simulation -> analytical simulation -> Qucik matchQuick match dialog should be opened.PanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.10 Quick Match4954400.10.10.001LOWverify the quick match icon3/11/13 2:05 PMadminIn quick match dialog verify the different parameters provided.Following different parameters provided under quick match dialog:

1. Cs

2.k

3.S

4.Start

5.EndPanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.10 Quick Match4954400.10.10.001LOWverify the quick match icon3/11/13 2:05 PMadminAfter entering the values of all parameters calculate the results by selecting calculate button.Result should be calculated and should be displayed under quick match results pane.PanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.10 Quick Match4954400.10.10.001LOWverify the quick match icon3/11/13 2:05 PMadminIn quick match dialog put the value of k blank or zeroWarning message should be displayed indicating 0 < k analytical simulation -> Auto matchAutomatic matching dialog should be displayedPanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.20 Auto Match4955400.10.20.001LOWVerify the automatch icon3/11/13 2:05 PMadminVerify the different sections provided in the automatching dialogFollowing different sections are provided in automatching dialog:

1.Max number of iterations

2.Solution Method

3.Pressure/Derivative Weighting

4.Match QualityPanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.20 Auto Match4955400.10.20.001LOWVerify the automatch icon3/11/13 2:05 PMadminVerify solution method sectionSolution method contains following radiobuttons:

1.Levenberg Marquardt

2.adaptivePanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.20 Auto Match4955400.10.20.001LOWVerify the automatch icon3/11/13 2:05 PMadminVerify advanced button functionality of solution methodAfter selecting advanced button advanced automatic matching dialog should be displayed

Dialog box should display following checkboxes:

1. Parameter transform

2. Parameter rescalingPanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.20 Auto Match4955400.10.20.001LOWVerify the automatch icon3/11/13 2:05 PMadminVerify help button functionalityHelp dialog should have to be openedPanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.20 Auto Match4956400.10.20.002LOWVerify different sections provided in automatch dialog box3/11/13 2:05 PMadminVerify pressure/derivative weighting sectionThe section should contains pressure/derivative weighing barPanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.20 Auto Match4956400.10.20.002LOWVerify different sections provided in automatch dialog box3/11/13 2:05 PMadminVerify match quality sectionSection should contain following radio buttons:

1.Excellent

2.good (bydefault selected)

3.poorPanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.20 Auto Match4956400.10.20.002LOWVerify different sections provided in automatch dialog box3/11/13 2:05 PMadminVerify lower and upper limits of different parametersLower and upper limits of various parameters k,cs,sf,xf should be displayedPanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.10 Quick Match4957400.10.10.002LOWVerification of quick match functionality3/11/13 2:05 PMadminOpen any model say Example.panx

Go to analysis -> Model selection -> modelSelect analysis model dialog should be displayed.PanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.10 Quick Match4957400.10.10.002LOWVerification of quick match functionality3/11/13 2:05 PMadminChange the model from reservoir model comboboxModel should be selectedPanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.10 Quick Match4957400.10.10.002LOWVerification of quick match functionality3/11/13 2:05 PMadminIn conventinal analysis icon select test periodTest period should be selectedPanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.10 Quick Match4957400.10.10.002LOWVerification of quick match functionality3/11/13 2:05 PMadminSelect plot types from given icons ex: log log plotPlot type should be selectedPanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.10 Quick Match4957400.10.10.002LOWVerification of quick match functionality3/11/13 2:05 PMadminSelect the type of slope from tools sectionSlope should be selectedPanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.10 Quick Match4957400.10.10.002LOWVerification of quick match functionality3/11/13 2:05 PMadminIn Simulation tab select quick match and click on calculatePlot should be matched with the slope selected.PanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.30 Advanced Simulation4958400.10.30.001LOWVerify advanced simulation control icon3/11/13 2:06 PMadminSelect advanced simulation control iconAdvanced simulation control window should be displayedPanSystemTestCases/400 Simulation/400.10 Analytical Simulation/400.10.30 Advanced Simulation4958400.10.30.001LOWVerify advanced simulation control icon3/11/13 2:06 PMadminVerify different sections provided in advanced simulation control windowFollowing different sections are provided:

1) Dataset section

2) Layer section

3)Speed option

4)Additional informationPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4959700.10.20.018LOWDefault unit verification3/13/13 5:25 PMadminIn Units editor dialog,verify default unit in comboboxDefault unit combobox should display default units for inbuilt unit systemPanSystemTestCases/700 Configuration/700.10 Configuration/700.10.20 Units Configuration4960700.10.20.019LOWUnits multiplier verification3/13/13 5:30 PMadminSelect multiplier value in multiply textbox for newly added unitMultiplier value should be displayed under user unit fieldon right hand sidePanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5038110.10.10.002 ASCII import - ILOW3/20/13 2:26 PMDeepankarOpen the PanSystem application by double clicking the shortcut or right click on the short cut and click on Open.The PanSystem application opens and the window looks like thisPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5038110.10.10.002 ASCII import - ILOW3/20/13 2:26 PMDeepankarClick on the left hand top corner W (Weatherford symbol)It will show all the tool strip or menu options like new, open, save, save all, save as, send as email, page set up, print, exit PanSystem and recent filesPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5038110.10.10.002 ASCII import - ILOW3/20/13 2:26 PMDeepankarSelect NewNewFIle1.Panx, Well 1, and Dataset appears on the Workspace TabPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5038110.10.10.002 ASCII import - ILOW3/20/13 2:26 PMDeepankarFrom the navigation pane, click on Import/Export Data button.The Windows Pane should contain Import Data, Export data, and ViewPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5038110.10.10.002 ASCII import - ILOW3/20/13 2:26 PMDeepankarUnder Import data, select ASCIIA dialogue box appears telling the user to select a Pan/Panx file to import the data to, or to create a new Panx file.PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5038110.10.10.002 ASCII import - ILOW3/20/13 2:26 PMDeepankarClick OK, Choose 'TEST1.DAT' and click OpenAfter clicking OK, Choose 'TEST1.DAT' from the folder containing your dataPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5038110.10.10.002 ASCII import - ILOW3/20/13 2:26 PMDeepankarHighlight the Time column (the time radio button is selected), select the hhhh:mm:ss format.PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5038110.10.10.002 ASCII import - ILOW3/20/13 2:26 PMDeepankarHighlight the Temperature column (The Guage radio button is selected), select Temperature and deg F as Unit.PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5038110.10.10.002 ASCII import - ILOW3/20/13 2:26 PMDeepankarHighlight the Pressre Column (The Gauge radio button is selected), select Pressure and psia as unit.PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5038110.10.10.002 ASCII import - ILOW3/20/13 2:26 PMDeepankarSelect Space/Tab delimited radio button and number of lines in header as 2, then click on import and plotUser is asked "Do you want to save a format template?"PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5038110.10.10.002 ASCII import - ILOW3/20/13 2:26 PMDeepankarSelect No when asked to save format template606 data is importedPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5038110.10.10.002 ASCII import - ILOW3/20/13 2:26 PMDeepankarClick OKThe imported data is plottedPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5040110.10.10.003 ASCII import - IILOW3/20/13 2:45 PMDeepankarOpen the PanSystem application by double clicking the shortcut or right click on the short cut and click on Open.The PanSystem application opens and the window looks like thisPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5040110.10.10.003 ASCII import - IILOW3/20/13 2:45 PMDeepankarClick on the left hand top corner W (Weatherford symbol)It will show all the tool strip or menu options like new, open, save, save all, save as, send as email, page set up, print, exit PanSystem and recent filesPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5040110.10.10.003 ASCII import - IILOW3/20/13 2:45 PMDeepankarSelect NewNewFIle1.Panx, Well 1, and Dataset appears on the Workspace TabPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5040110.10.10.003 ASCII import - IILOW3/20/13 2:45 PMDeepankarFrom the navigation pane, click on Import/Export Data button.The Windows Pane should contain Import Data, Export data, and ViewPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5040110.10.10.003 ASCII import - IILOW3/20/13 2:45 PMDeepankarUnder Import data, select ASCIIA dialogue box appears telling the user to select a Pan/Panx file to import the data to, or to create a new Panx file.PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5040110.10.10.003 ASCII import - IILOW3/20/13 2:45 PMDeepankarClick OK, Choose 'TEST1.DAT' and click OpenAfter clicking OK, Choose 'TEST1.DAT' from the folder containing your dataPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5040110.10.10.003 ASCII import - IILOW3/20/13 2:45 PMDeepankarHighlight the Time column (the time radio button is selected), select the hhhh:mm:ss format.PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5040110.10.10.003 ASCII import - IILOW3/20/13 2:45 PMDeepankarHighlight the Temperature column (The Guage radio button is selected), select Temperature and deg F as Unit.PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5040110.10.10.003 ASCII import - IILOW3/20/13 2:45 PMDeepankarHighlight the Pressre Column (The Gauge radio button is selected), select Pressure and psia as unit.PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5040110.10.10.003 ASCII import - IILOW3/20/13 2:45 PMDeepankarSelect Fixed column width radio button and number of lines in header as 2, then click on import and plotUser is asked "Do you want to save a format template?"PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5040110.10.10.003 ASCII import - IILOW3/20/13 2:45 PMDeepankarSelect No when asked to save format template606 data is importedPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5040110.10.10.003 ASCII import - IILOW3/20/13 2:45 PMDeepankarClick OKThe imported data is plottedPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5041110.10.10.004 ASCII import - IIILOW3/20/13 2:52 PMDeepankarOpen the PanSystem application by double clicking the shortcut or right click on the short cut and click on Open.The PanSystem application opens and the window looks like thisPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5041110.10.10.004 ASCII import - IIILOW3/20/13 2:52 PMDeepankarClick on the left hand top corner W (Weatherford symbol)It will show all the tool strip or menu options like new, open, save, save all, save as, send as email, page set up, print, exit PanSystem and recent filesPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5041110.10.10.004 ASCII import - IIILOW3/20/13 2:52 PMDeepankarSelect NewNewFIle1.Panx, Well 1, and Dataset appears on the Workspace TabPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5041110.10.10.004 ASCII import - IIILOW3/20/13 2:52 PMDeepankarFrom the navigation pane, click on Import/Export Data button.The Windows Pane should contain Import Data, Export data, and ViewPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5041110.10.10.004 ASCII import - IIILOW3/20/13 2:52 PMDeepankarUnder Import data, select ASCIIA dialogue box appears telling the user to select a Pan/Panx file to import the data to, or to create a new Panx file.PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5041110.10.10.004 ASCII import - IIILOW3/20/13 2:52 PMDeepankarClick OK, Choose 'TEST1.DAT' and click OpenAfter clicking OK, Choose 'TEST1.DAT' from the folder containing your dataPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5041110.10.10.004 ASCII import - IIILOW3/20/13 2:52 PMDeepankarClick on show previewa preview of the data is shownPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5042110.10.10.005 ASCII import - IVLOW3/20/13 2:57 PMDeepankarOpen the PanSystem application by double clicking the shortcut or right click on the short cut and click on Open.The PanSystem application opens and the window looks like thisPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5042110.10.10.005 ASCII import - IVLOW3/20/13 2:57 PMDeepankarClick on the left hand top corner W (Weatherford symbol)It will show all the tool strip or menu options like new, open, save, save all, save as, send as email, page set up, print, exit PanSystem and recent filesPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5042110.10.10.005 ASCII import - IVLOW3/20/13 2:57 PMDeepankarSelect NewNewFIle1.Panx, Well 1, and Dataset appears on the Workspace TabPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5042110.10.10.005 ASCII import - IVLOW3/20/13 2:57 PMDeepankarFrom the navigation pane, click on Import/Export Data button.The Windows Pane should contain Import Data, Export data, and ViewPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5042110.10.10.005 ASCII import - IVLOW3/20/13 2:57 PMDeepankarUnder Import data, select ASCIIA dialogue box appears telling the user to select a Pan/Panx file to import the data to, or to create a new Panx file.PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5042110.10.10.005 ASCII import - IVLOW3/20/13 2:57 PMDeepankarClick OK, Choose 'TEST1.DAT' and click OpenAfter clicking OK, Choose 'TEST1.DAT' from the folder containing your dataPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5042110.10.10.005 ASCII import - IVLOW3/20/13 2:57 PMDeepankarHighlight the Time column (the time radio button is selected), select the hhhh:mm:ss format.PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5042110.10.10.005 ASCII import - IVLOW3/20/13 2:57 PMDeepankarHighlight the Temperature column (The Guage radio button is selected), select Temperature and deg F as Unit.PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5042110.10.10.005 ASCII import - IVLOW3/20/13 2:57 PMDeepankarSelect Space/Tab delimited radio button and number of lines in header as 2, then click on import and plotUser is asked "Do you want to save a format template?"PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5042110.10.10.005 ASCII import - IVLOW3/20/13 2:57 PMDeepankarSelect Yes and save as temp1.dat606 data is importedPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5042110.10.10.005 ASCII import - IVLOW3/20/13 2:57 PMDeepankarClick OKThe imported data is plotted

check to make sure the temp1.tpt file is createdPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5043110.10.10.006 ASCII import - VLOW3/20/13 3:16 PMDeepankarOpen the PanSystem application by double clicking the shortcut or right click on the short cut and click on Open.The PanSystem application opens and the window looks like thisPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5043110.10.10.006 ASCII import - VLOW3/20/13 3:16 PMDeepankarClick on the left hand top corner W (Weatherford symbol)It will show all the tool strip or menu options like new, open, save, save all, save as, send as email, page set up, print, exit PanSystem and recent filesPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5043110.10.10.006 ASCII import - VLOW3/20/13 3:16 PMDeepankarSelect NewNewFIle1.Panx, Well 1, and Dataset appears on the Workspace TabPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5043110.10.10.006 ASCII import - VLOW3/20/13 3:16 PMDeepankarFrom the navigation pane, click on Import/Export Data button.The Windows Pane should contain Import Data, Export data, and ViewPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5043110.10.10.006 ASCII import - VLOW3/20/13 3:16 PMDeepankarUnder Import data, select ASCIIA dialogue box appears telling the user to select a Pan/Panx file to import the data to, or to create a new Panx file.PanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5043110.10.10.006 ASCII import - VLOW3/20/13 3:16 PMDeepankarClick OK, Choose 'TEST2.DAT' and click OpenAfter clicking OK, Choose 'TEST2.DAT' from the folder containing your dataPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.10 ASCII5043110.10.10.006 ASCII import - VLOW3/20/13 3:16 PMDeepankarClick on "Load template" and select temp1.datretrieve temp1.dat, and the previously saved template should be available nowPanSystemTestCases/100 ImportExport data/100.10 Import Data/110.10.20 From Pan >Analytical model to verify the data.Opens example file.

Clicking on Analytical model opens a window displaying parameters like- Fluid type, Well control and Layer control.

Example 5.1 contains oil well data. Verify using attached screenshot.PanSystemTestCases/Pan WellFlo Interface5364THP to BHP Calculation for Oil wellLOWWellhead to Bottom Hole Pressure Conversion (THP to BHP)7/11/13 11:23 AMRituGo to Gauge data tab>> THP to BHPOpens a window having three tabs -

1. Using VFP Tables

2. Using WellFlo

3. Simple Gas

Verify with the attached screenshot.PanSystemTestCases/Pan WellFlo Interface5364THP to BHP Calculation for Oil wellLOWWellhead to Bottom Hole Pressure Conversion (THP to BHP)7/11/13 11:23 AMRituSelect>> Using WellFlo from the three tabs.

Input valid values for Oil rate, GOR, Water cut and Qgi (Only enabled if we select 'use constant parameter' from the dropdown given).

Browse to import WellFlo file.

Set THP@ Wellhead/Gauge from the dropdown.It allows to input parameter only when we use constant parameter. For other options it gets disabled.

Name for BHP column is editable.

User may select between the points of THP from the dropdown.PanSystemTestCases/Pan WellFlo Interface5364THP to BHP Calculation for Oil wellLOWWellhead to Bottom Hole Pressure Conversion (THP to BHP)7/11/13 11:23 AMRituClick on Calculate button and verify BHP values.PanSystemTestCases/Pan WellFlo Interface5364THP to BHP Calculation for Oil wellLOWWellhead to Bottom Hole Pressure Conversion (THP to BHP)7/11/13 11:23 AMRituTo verify the correctness of BHP data:

Open WellFlo model attached to this case. Go to Reservoir section and make sure that Water Cut and GOR are the same as the input from PanSystem.

Go to Analysis>>Pressure drop>>

Set THP as 4999.01709.

Rate as 2359.4 (Total liquid rate).

Apply>>Calculate>>It gives a pressure drop values calculating BHP for the specified values of THP and Rate.

Refer attached screenshot.PanSystemTestCases/Pan WellFlo Interface5364THP to BHP Calculation for Oil wellLOWWellhead to Bottom Hole Pressure Conversion (THP to BHP)7/11/13 11:23 AMRituGo to the Wellflo.Log tab and verify that the pressure drop is the same as the one reported in PanSystem. The correct pressure drop is the one shown at the solution node.BHP calculated in WF should match with the one calculated in Pan system.PanSystemTestCases/Pan WellFlo Interface6436To verify IPR Relative Permeability data for Condensate Fluid type.LOWTo verify IPR Relative permeability data for Condensate Fluid type using Multi phase pseudo pressure method.7/11/13 3:55 PMRituOpen "Gas examp".

Go to Data Preparation>>Well, Reservoir and fluid decription>> Analytical model.

Change Fluid type to "Condensate" and check the box for Multiphase pseudo pressure method.Fluid type is changed to Condensate and Multiphase Pseudo pressure method is used.

Refer attached screenshot.PanSystemTestCases/Pan WellFlo Interface6436To verify IPR Relative Permeability data for Condensate Fluid type.LOWTo verify IPR Relative permeability data for Condensate Fluid type using Multi phase pseudo pressure method.7/11/13 3:55 PMRituGo to Layer control tab>>Click on Layer parameter.

Input values for parameters like- Formation thickness, Porosity, Layer pressure, Layer temp, Water saturation.Opens a window for Reservoir parameters.

Gas saturation value is calculated based on Water saturation we enter.

Enter values as given in screenshot.PanSystemTestCases/Pan WellFlo Interface6436To verify IPR Relative Permeability data for Condensate Fluid type.LOWTo verify IPR Relative permeability data for Condensate Fluid type using Multi phase pseudo pressure method.7/11/13 3:55 PMRituSelect Reservoir model as Radial homogeneous from the dropdown.Model has dropdown to select the type of Reservoir model.PanSystemTestCases/Pan WellFlo Interface6436To verify IPR Relative Permeability data for Condensate Fluid type.LOWTo verify IPR Relative permeability data for Condensate Fluid type using Multi phase pseudo pressure method.7/11/13 3:55 PMRituClick on Relative Permeability button.Opens a window for Data selection as Parametric or Table.PanSystemTestCases/Pan WellFlo Interface6436To verify IPR Relative Permeability data for Condensate Fluid type.LOWTo verify IPR Relative permeability data for Condensate Fluid type using Multi phase pseudo pressure method.7/11/13 3:55 PMRituClick the radio button for Parametric Relative Permeability data.

Click on Edit data button to edit Relative permeability data.

Verify the Relative permeabilty data with WellFlo Relative permeability data.Relative permeabilty data present in this tab sholud match with the relative permeabilty data present in any WellFlo model with condensate fluid type.

Relative permeability data can be edited using Edit button.PanSystemTestCases/Pan WellFlo Interface6436To verify IPR Relative Permeability data for Condensate Fluid type.LOWTo verify IPR Relative permeability data for Condensate Fluid type using Multi phase pseudo pressure method.7/11/13 3:55 PMRituClick the radio button for Tabular Relative Permeability Data.

Click Edit data button below.By default no data is present.

User should be able to feed data in the table.

Copy/Paste option is also present to enter data manually.PanSystemTestCases/Pan WellFlo Interface6436To verify IPR Relative Permeability data for Condensate Fluid type.LOWTo verify IPR Relative permeability data for Condensate Fluid type using Multi phase pseudo pressure method.7/11/13 3:55 PMRituUninstall WellFlo and try opening Relative permeability data again.Uninstalling WF disconnects link to generate Relative permeabilty data from WellFlo.

Application throws error. Refer attached screenshot.PanSystemTestCases/Pan WellFlo Interface6442To verify Layer Fluid Parameters calculation when using Condensate and Multiphase Pseudo-pressure method.LOW7/17/13 10:10 AMRituOpen "Gas examp".



Refer attached screenshot.PanSystemTestCases/Pan WellFlo Interface6442To verify Layer Fluid Parameters calculation when using Condensate and Multiphase Pseudo-pressure method.LOW7/17/13 10:10 AMRituGo to Layer control tab>>Click on Layer Fluid parameters.

Input values for parameters like- Condensate/ gas ratio, Check pressure and temperature, API gravity and water salinity as given in screenshot.

Click on Calculate button.Gas properties are being calculted based on the values inputed.

Gas properties are editable and values in red are are mandatory.PanSystemTestCases/Pan WellFlo Interface6442To verify Layer Fluid Parameters calculation when using Condensate and Multiphase Pseudo-pressure method.LOW7/17/13 10:10 AMRituReduce license for wellflocom from FlexLM file.

Again input values and click on Calculate button.Pan system calls WPS for fluid parameter calculation.

When the license is disabled it shows error in calculation. Refer screenshot.PanSystemTestCases/Pan WellFlo Interface6443To verify Pseudo Tables Data Review and Calculate Table operations when using Multiphase Pseudo-pressure method.LOW7/17/13 11:02 AMRituOpen "Gas examp".



Refer attached screenshot.PanSystemTestCases/Pan WellFlo Interface6443To verify Pseudo Tables Data Review and Calculate Table operations when using Multiphase Pseudo-pressure method.LOW7/17/13 11:02 AMRituGo to Layer control tab>>Click on Layer Fluid parameters.

Input values for parameters like- Condensate/ gas ratio, Check pressure and temperature, API gravity and water salinity as given in screenshot.

Click on Calculate button.Gas properties are being calculted based on the values inputed.

Gas properties are editable and values in red are are mandatory.PanSystemTestCases/Pan WellFlo Interface6443To verify Pseudo Tables Data Review and Calculate Table operations when using Multiphase Pseudo-pressure method.LOW7/17/13 11:02 AMRituClick on Pseudo tables button>>m'(p) Table>>Calculate Table.Refer attached screenshot.PanSystemTestCases/Pan WellFlo Interface6443To verify Pseudo Tables Data Review and Calculate Table operations when using Multiphase Pseudo-pressure method.LOW7/17/13 11:02 AMRituClick on Edit Table and verify the data.PanSystemTestCases/Pan WellFlo Interface6443To verify Pseudo Tables Data Review and Calculate Table operations when using Multiphase Pseudo-pressure method.LOW7/17/13 11:02 AMRituClick on Plot button to generate the plot between Pseudo pressure and Pressure.Refer attached screenshot.PanSystemTestCases/Pan WellFlo Interface6443To verify Pseudo Tables Data Review and Calculate Table operations when using Multiphase Pseudo-pressure method.LOW7/17/13 11:02 AMRituReduce wellflocom license from FlexLM file and try calculating Pseudo pressure again.An error will be shown. Refer attached screenshot.

export test case 20130926

Documents