express brochure
TRANSCRIPT
8/8/2019 Express Brochure
http://slidepdf.com/reader/full/express-brochure 1/4
System Brochure
ExPress Series Universal Tesng Systems
8/8/2019 Express Brochure
http://slidepdf.com/reader/full/express-brochure 2/4
Test with Certainty.
51 Morgan Drive Norwood, MA 02062
Tel: (781) 769-0850 Fax: (781) 769-0884
[email protected] www.ADMET.com
Power, Durability and Performance.
A bold new approach to servo-hydraulic tesng. Manufactured to exacng standards,
these machines are tough and cost less than convenonal hydraulic tesng machines.
ExPress machines employ strain gage load cells for direct measurement
of force. No need to compensate for piston fricon and other nonlineari-
es, these frames oer exceponal accuracy and precision while reducing
long-term calibraon and service costs. The hydraulic power supply and
electronics are integral with the frame thereby saving valuable lab space.
• Available in capacies from 50kN (11,250 lbf) to
600kN (135,000 lbf), ExPress machines are de-
signed for performing tests on bar stock, com-
posites, fasteners, metals, rebar, sheet materials,
strapping, wire and other materials.
• Dual-acng piston provides exibility for tension,
compression and exure tesng.
• Integral operator staon with emergency stop
buon and manual jog controls.
Taller, shorter, wider, faster, slower: Our engineer-
ing group will congure a design to meet your
specicaons. A second actuator can also be add-
ed for performing biaxial tests.
Trusted - Expertly designed, engineered
and supported for life.
• Exceeds all ASTM/ISO accuracy requirements.
• Fastest in the industry, an 8 kHz servo loop
rate ensures accurate, repeatable, and reli-
able tesng.
• All tesng systems are supported for life.
ExPress 600kN
(120,000 lbf)
High capacity
wedge grips
and load cell
ExPr
w/ hig
loaMTEST
Customizable - Backed by superior engineering and
a willingness to tailor a system to your tesng needs.
e
a
(no
ExPress Series Universal Tesng Systems
8/8/2019 Express Brochure
http://slidepdf.com/reader/full/express-brochure 3/4
Model 50kN 100kN 150kN 300kN 600kN
Load Capacity
lbf
kN
kgf
10,000
50
5,000
20,000
100
10,000
30,000
150
15,000
60,000
300
30,000
120,000
600
60,000
Maximum
Speed
in/min
mm/min
9
228
4.5
114
191
482
131
330
3.2
81
Minimum Speedin/min
mm/min
0.001
0.025
0.001
0.025
0.001
0.025
0.001
0.025
0.001
0.025
Maximum Force
at Full Speed
lbf
kN
10,000
50
20,000
100
30,000
150
60,000
300
120,000
600
Position ControlResolution
minmm
0.00020.005
0.00020.005
0.00020.005
0.00020.005
0.00020.005
Power Stroke2 in
mm
12
305
12
305
12
305
12
305
12
305
Total Vertical
Test Space3
in
mm
38.5
978
42
1,066
42
1,066
42
1,066
42
1,066
Crosshead
Thickness
in
mm
3.5
89
4
101
5
127
6
152
8
203
Column
Diameter
in
mm
2
50.8
3
76.2
3
76.2
3
76.2
3
76.2
Space Between
Columns
in
mm
19
508
19
508
19
508
19
508
24
609
Height inmm 822,083 832,108 852,159 862,184 932,362
Width
(Frame Only)
in
mm
30.5
775
30.5
775
30.5
775
30.5
775
35
889
Depthin
mm
29
737
29
737
29
737
29
737
34
864
Weightlb
kg
800
363
1,000
454
1,500
680
2,000
907
3,300
1,497
Maximum
Power VA 560 560 745 745 1,600
VoltageVAC
Hz
110-220, 1f
50,60
110-220, 1f
50,60
110-220, 1f
50,60
110-220, 1f
50,60
220-440, 3f
50,60
Notes:
1. Machines use two stage pump (ie. high ow forces and low owat high forces). The published rates are at low forces. At higher
forces the maximum rate will be 1/6 the published.
2. Longer or shorter strokes are available upon request.
3. Total vercal test space is the distance from the top surface of
the piston rod to the boom surface of the crosshead when
fully extended, excluding load cell, grips and xtures. Larger or
smaller openings can be accommodated by varying the lengths
of the strain rods.
Load Measurement Accuracy: +/- 0.5% of reading down to 1/100 of load cell capacity. Meets or exceeds ASTM E4, BSENIS 7500-1: 2004,
DIN 51221 and JIS B7721 standards. ADMET self-idenfying load cells
are oered with all systems.
Strain Measurement Accuracy: +/- 0.5% of reading down to 1/50 of
full scale with ASTM E83 class B extensometers. Meets or exceeds
ASTM E83 and BSENISO9513: 2002 standards.
Test with ADMET.
51 Morgan Drive Norwood, MA 02062
Tel: (781) 769-0850 Fax: (781) 769-0884
[email protected] www.ADMET.com
Power, Durability and Performance.
System Specifcaons
ExPress Series Universal Tesng Systems
8/8/2019 Express Brochure
http://slidepdf.com/reader/full/express-brochure 4/4Copyright 2010. All rights reserved. ADMET, Inc. Norwood, MA 02062 USA
51 Morgan Drive Norwood, MA 02062
Tel: (781) 769-0850 Fax: (781) 769-0884
[email protected] www.ADMET.com
Power, Durability and Performance.
Controller MTESTQuaro® eP2 Digital Controller
Interface PC Software Touch Panel
Analysis
Extensive calculaons library
w/ built-in ASTM/ISO
specicaon analysis.
Standard calculation package
for basic testing requirements
and QC testing.
Test Procedures
Use built-in or create an
unlimited number of simple to
complex procedures.
Save up to six test procedures
in eP2.
Reporting
Store and organize all data.
View and print user
customizable test reports with
chart and tables.
Post test, view current results
on eP2 screen and send data
to PC for reporting using
optional GaugeSafe software.
MTESTQua
e
Controls and Soware
All ADMET Tesng Machines can be equipped with one of two closed
loop servo controllers. MTESTQuaro®, our most advanced tesng sys-
tem, is a PC-based unit that oers a wide range of exibility in control,
data acquision, analysis, and reporng. The eP2 Digital Controller, a
standalone touch panel unit, oers a balance between performance
and simplicity. Both controllers feature 8 kHz servo update periods and
programmable log rates to 1 kHz.
Accessories - Grips, environmental chambers,
extensometers, baths, cung tools and more.
Systems can be equipped with a variety of grips, xtures, environ-
mental chambers and temperature controlled baths to accommodate
a wide range of tesng requirements. For more accurate strain mea-
surements, extensometers or deectometers can be added to any
ADMET tesng System.
Service and Calibraon
MTESTQuaro® running on Windows
Training and Service - ADMET tesng systems are easy to learn and use. We provide free introductory on-line training
and, if needed, addional on-site training. Our manuals, tutorials, and trouble shoong guides are updated regularly.
We provide free phone and email product support through the life of the system. ADMET’s on-site service and calibra-
on team includes over 100 individuals in over 40 locaons in the USA.
Calibraon - Customers can setup calibraon contracts with ADMET or a private party. All services are A2LA accredited
and meet ISO/IEC Guide 17025 and ANSI/NCSL Z540.
www.ADMET.com
For more grips informaon, please visit hp://admet.com/
Extensometers and strain measuring for metals, plascs
and other high elongaon test specicaons. Perform tests
to standards ASTM E-8, E-517, E-646, and D-638, ISO 6892,
10275, and EN 1002 Part 1 and 10130
ExPress Series Universal Tesng Systems