exquisite hardwood from the - dale nelson
TRANSCRIPT
Exquisite hardwood from the
hands of master shipwrights
seamlessly harmonises with a high performance
computer formed e-glass epoxy composite hull
to captivate your senses like no other craft.
32
• 35ft (10.5m) full planing hull withfine entry forward hull sections
• Exhilarating handling with ‘Nelson’ levels ofsea-keeping and ride
• E-glass epoxy composite construction for superior strengthand maximum performance
• Single engine installation from 200hp – 400hpor twin engine installation from 2x150hp – 2x260hp
• 33 knot performance with single 400hp
• Bespoke build tailored to each owner’srequirements and taste
• Forward accommodation with heads and galley below
• Sociable cockpit layout with seating, tableand stowage to owner’s requirements
Everything you’ve heard and read of a DALE hull
lifts your expectations...
“peerless”
“a phenomenal driving experience”
“kings of boats that laugh in the face of rough seas”
“supreme comfort and security”
...as you open the throttles and the Classic 35 lifts her
graceful skirts to astonishing levels, you start to appreciate
just why such praise is written.
A single 400hp Volvo D6* lifts her out of the water with
no fuss to 20 knots in just 11 seconds and on to 30 knots
in 30 seconds, before reaching a top speed of 33 knots.
Yet the sports boat-like performance only begins the story.
Helming the 35 is about connecting with the sea in a way
which inspires confidence and brings a smile to your face.
The hull’s grip through a tight turn feels like it wants to
make a mockery of g-forces.
A supreme ride paves a smooth path through seas that
would challenge much larger craft.
The 35 has all the abilities she needs, and more in reserve,
to cruise in absolute control and total comfort. Irresistible.
* One of the single engine options – see page 11 54
Where luxury becomes discreet
To build a hull that performs like the Classic 35 demands
a different approach.
First there is the depth of experience.
The Classic 35 is a new design that draws on a quarter of a century of
DALE Nelson’s association with TT Boat Designs – a partnership
which has created semi-planing and full planing hulls which have
become legendary amongst those who know the sea.
Then there is the different way the boat is built.
Behind the elegant lines lies an advanced computer formed e-glass
epoxy composite hull – providing the accuracy, lightness and
strength required to achieve the design’s full potential.
Our craftsmen apply their superlative skills and attention to detail
in equal measure to both the 21st century materials and the finest
traditions in boat building.
Every installation is meticulously precise, every bit of wood you see
is crafted from solid hardwood, every finish is honed until it can be
perfected no more.
The lines and exquisite finishes draw the eye of the onlooker, but
only the owner can fully appreciate the extent of the boat’s abilities
– luxury that is truly discreet.
76
Perfectly matched to every owner
The Classic 35 perfectly illustrates the way DALE can approach
a truly bespoke build. Hull number one started from a meeting
between ourselves,TT Boat Designs, the owner and a blank
sheet of paper.
Everything from the keel up was designed to suit the brief of a
top performing day boat with accommodation for a tall family
wishing to overnight occasionally.
“I felt I would get exactly the boat I wanted – TT Boat designs and the DALE build team
were prepared to give me complete access and input to all aspects of the boat. Few boat
designers and builders would put up with an owner wanting to be so intimately involved.”
“You can be confident that the yard will adhere to the highest standards – they are among the
very best in Europe for this size boat.”
This same process is available to anyone who builds a boat with DALE
– you can have as much (or as little if that suits you better) input as
you like – fully bespoke, ‘off the shelf ’ or somewhere in between.
We draw on your boating life, your requirements, your tastes and your
aesthetic judgement.You draw on our experience, our design
expertise, our determination to match ideal solutions to your needs
and our total commitment to each and every build.
The result is a boat that will match you perfectly.
Bill Slee,owner of DALE Classic 35 hull No 001
98
DALE Classic 35 principal specifications
Full planing hull in e-glass epoxy composite
Length overall ....................................................................................... 11.13m
Length over hull .................................................................................. 10.42m
Beam overall ............................................................................................ 3.38m
Draft...................... 0.80m (outdrive raised) 1.30m (outdrive lowered)
Fuel capacity (approx.) ....................................... 580 ltrs (128 gallons)
Electrics ...................................................................................... 12V
Single engines: 200hp – 400hp turbo diesel
through single or duo prop outdrive
Twin engines: 2 x 150hp – 2 x 260hp turbo diesel
through single or duo prop outdrives
Please see separate sheet for full specification.
Every boat is a hand-crafted build so cockpit layout; seating; cabin, galley and heads layout; materials; colour schemes and equipment
can be tailored to each owner’s requirements.
1110
After sales undying attention
To say we offer after sales care, would be a disservice to the
people who will look after you. Perhaps we would be better
to say “after sales undying attention”.
Your boat’s original build team will be assigned to carry out
all your maintenance and servicing.
This approach builds an unrivalled bank of knowledge and a
commitment to ensuring that, for the boat’s entire lifetime,
your DALE is everything it was on the day it was launched.
And we’re always available whenever you want to call on us
for help and advice.
1312
The first step to owning a DALE Classic 35
This brochure has introduced you to the Classic 35, yet
words and photos will only go so far to explain the
difference that is DALE.
The way to appreciate the full depth of the build quality
and the full extent of the boat’s abilities is to experience
it for yourself.
We’d be delighted to offer you a no-obligation
viewing or sea-trial.
The first step is to talk to us – we’re happy to answer
anything you’d like to know.
Call Mike Reynolds on +44 (0)1646 603112
or +44 (0)7879 481717
or e-mail: [email protected]
or visit: www.dalenelson.co.uk
1514 Photography by Nathan Lowe. Brochure design and production by Signature Design 01834 842655.
DALE Classic 35 design:Arthur Mursell of TT Boat Designs
Inhouse detailing: Matthew Barker of DALE Nelson, with invaluable input from
owner Bill Slee who commissioned hull number 001.
DALE Motor Yachts,
Brunel Quay, Neyland Marina,
Neyland, Pembrokeshire, United Kingdom SA73 1PY
Tel: +44 (0)1646 603112 or +44 (0)7879 481717
e-mail: [email protected] www.dalenelson.co.uk