external rearview mirror maintenace - irizar · pdf fileexternal rearview mirror maintenace ....
TRANSCRIPT
Instrução Técnica – Instrucción Técnica – Technical Instruction
1
Rod. Marechal Rondon, KM 252,5, BOTUCATU – SP- BRASIL Tel. 55 14 3811 8000 [email protected]
EXTERNAL REARVIEW MIRROR MAINTENACE
Instrução Técnica – Instrucción Técnica – Technical Instruction
2
Rod. Marechal Rondon, KM 252,5, BOTUCATU – SP- BRASIL Tel. 55 14 3811 8000 [email protected]
1 Tools needed Rubber Hammer.
5mm long-rod hex-key.
Ratchet hex key with 8mm sockets.
Find the locking-bolt at the lower side of of the mirror’s
arm.
Free the lockjng-bolt with the long-rod hex key.
Remove the fixation lock from the mirror’s arm. To remove the mirror’s arm, push up the arm with both
hands.
Instrução Técnica – Instrucción Técnica – Technical Instruction
3
Rod. Marechal Rondon, KM 252,5, BOTUCATU – SP- BRASIL Tel. 55 14 3811 8000 [email protected]
Separate the conectors of the eletrical motor and anti-
fog circuit.
Move the upper side of the mirror in, show ing the mirror’s fixing lock in it’s lower side.
With the help of a screwdriver, push the lock in and down, to make possible the removal of the mirror.
Instrução Técnica – Instrucción Técnica – Technical Instruction
4
Rod. Marechal Rondon, KM 252,5, BOTUCATU – SP- BRASIL Tel. 55 14 3811 8000 [email protected]
Once lifted the lower side, move the mirror downward
to remove it.
The mirrors has a anti-fog circuit fed by two conector wich must be desconected in order to remove the mirror.
Instrução Técnica – Instrucción Técnica – Technical Instruction
5
Rod. Marechal Rondon, KM 252,5, BOTUCATU – SP- BRASIL Tel. 55 14 3811 8000 [email protected]
Repeat the same explained steps to remove the auxiliar
mirror.
2 DRIVEMOTOR REMOVAL
Locate the three piilips bolts on the mirror support and free them to remove the support.
After remove the mirrors’s pad, we have acces to the
mirror’s drivemotor.
Instrução Técnica – Instrucción Técnica – Technical Instruction
6
Rod. Marechal Rondon, KM 252,5, BOTUCATU – SP- BRASIL Tel. 55 14 3811 8000 [email protected]
To remove the drivemotor, free the four bolts located
behind it, using the long-rod hex key.
3 CHANGING THE MIRROR’S MOUNTING BRACKET
Before reassembly the mirror, inspect the mounting
bracket for possible damage or cracks.
Find the four m8 bolts on the mounting bracket of the
mirror’s arm.
To remove the mounting bracket remove the four bolts
using the long-rod hex-key.