extrusions - b-d company · 2015. 9. 24. · 75000601 (as1656) 1/4” 75000502 (as1524) round lock...
TRANSCRIPT
B-D Company Section 8 - Page 1 303.744.1405 1.800.748.2244
MANUFACTURER & DISTRIBUTOR OF FINE AUTOMOTIVE PRODUCTS
Your One Stop Shop For Specialty Automotive Products
Extrusions
Glass Run Channel Glass Felt Strips
Glass Setting Rubber Bulb Seal
Quick Edge Door Seals Trunk Seals
1360 S. Acoma St. Denver, CO. 80223
303.744.1405 800.748.2244
www.b-dco.com
B-D Company Section 8 - Page 2 303.744.1405 1.800.748.2244
Table of Contents
Quick Edge Glass Run Channel Soft Glass Run Channel Glass Felt Setting Tapes & Clips Bulb Seal Two Piece Glass Setting Channel One Piece Glass Setting Channel Windshield Filler Glass Setting Dense Rubber Clean Seal Metro Soffseal Self Adhesive Weatherstrip Sponge Weatherstrip Fender Welt
3 - 4
5 - 6
7
8 - 9
10
11
12
13
14
15
16 - 17
18
18 - 19
20
21
22
B-D Company Section 8 - Page 3 303.744.1405 1.800.748.2244
For 1/8” Edges
Mini “Minitrim” For 1/32” Edges Grips Edges from .010” to .030” Thick
Part No. Description Carton Ft
75001581 Black Sof-Tone 400
Pinch Top Single Lip Trim Grips Edges from .085” to .210” Thick
Long Leg Single Lip Trim For 1/8” to 3/16” Edges
Grips Edges from .085” to .210” Thick
Part No. Description Carton Ft
75000339 Black Sof-Tone 400
For 1/32” to 1/8” Edges
Standard Double Lip Trim
Grips Edges from .032” to .125” Thick
Part No. Description Carton Ft
75000317 Black Sof-Tone 100
75000319 Green Sof-Tone 100
75000320 Aqua Sof-Tone 100
75000321 Gray Sof-Tone 100
75000322 Fawn Sof-Tone 100
75000323 Off-White Sof-Tone 100
75000325 Red Sof-Tone 100
75000326 Blue Sof-Tone 100
75000327 Brown Sof-Tone 100
Safety Color Trim
Part No. Description Carton Ft
75000332 Safety Orange Sof-Tone 100
75000333 Safety Yellow Sof-Tone 100
For 1/2” to 3/16” Edges Grips Edges from .090” to .190” Thick
Minitrim For 1/32” Edges
Grips Edges from .010” to .050” Thick
Part No. Description Carton Ft
75000341 Black Sof-Tone 400
75000342 White Sof-Tone 400
QuickEdge Plastic Trim
Standard Single Lip Trim For 1/2” to 3/16” Edges
Grips Edges from .090” to .190” Thick
Part No. Description Carton Ft
75000338 Black Sof-Tone 400
Part No. Description Carton Ft
75000334 Black Sof-Tone 400
B-D Company Section 8 - Page 4 303.744.1405 1.800.748.2244
QuickEdge Plastic Trim
1/2” Trim
Grips edges from .250” to .500” Thick
Part No. Description Carton Ft
75000349 Black Sof-Tone 150
For 3/8” to 1/2” Edges
5/8” Trim
Grips Edges from .520” to .625” Thick
Part No. Description Carton Ft
75001837 Black Sof-Tone 100
For 1/2” to 5/8” Edges
3/4” Trim
Grips Edges from .670” to .750” Thick
Part No. Description Carton Ft
75001838 Black Sof-Tone 100
For 5/8” to 3/4” Edges
“Q” Trim For 3/16” to 1/4” Edges
Grips Edges from .135” to .250” Thick
Part No. Description Carton Ft
75000343 Black Sof-Tone 250
75000344 White Sof-Tone 250
Special Single Lip Trim For 1/8” to 3/16” Edges
Grips Edges from .090” to .180” Thick
Part No. Description Carton Ft
75000721 Black Sof-Tone 400
75000722 White Sof-Tone 400
1/4” Woodgrain Pad Trim
Grips Edges from .150” to .300” Thick
For 3/16” to 1/4” Edges
Decorative Single Lip Trim
Grips Edges from .090” to .190” Thick
Part No. Description Carton Ft
75000361 Black Sof-Tone Chrome Pad 300
For 1/8” to 3/16” Edges
Part No. Description Carton Ft
75000360 White Sof-Tone 300
75000362 Beige Sof-Tone 300
B-D Company Section 8 - Page 5 303.744.1405 1.800.748.2244
Glass Run Channel
75000004 (2C) 72” Flexible Glass Run Channel
75000015 (3C1) 96” Flexible Glass Run Channel
75000024 (3J4) 96” Flexible Glass Run Channel
75000032 (5P) 96” Rigid Glass Run Channel
75000028 (3K1) 96” Rigid Glass Run Channel
75000049 (8A2) 96” Flexible Glass Run Channel
75000055 (10A) 96” Flexible Glass Run Channel
75000050 (8L) 72” Rigid Glass Run Channel
75000063 (10E) 96” Rigid Glass Run Channel
(Can be bent in long lengths)
DRAWINGS NOT TO SCALE
No Longer Available
B-D Company Section 8 - Page 6 303.744.1405 1.800.748.2244
75000073 (10G) 96” Rigid Glass Run Channel
(Can be bent in long lengths)
75000079 (10M) 60” Rigid Glass Run Channel
75000098 (Y526) 96” Flexible Glass Run Channel
With Chrome Bead
75000111 (Y528) 96” Flexible Glass Run Channel
With Chrome Bead
75000122 (Y614) 96” Rigid Glass Run Channel
With Chrome Bead
75000135 (Y660X) 72” Rigid Glass Run Channel
With Chrome Bead
Glass Run Channel
100 96” Rigid Metal Channel
DRAWINGS NOT TO SCALE
B-D Company Section 8 - Page 7 303.744.1405 1.800.748.2244
75000457 (AS1336) 96” Flexible Glass Run Channel
Soft Rubber
75000486 (AS1369) 72” Flexible Glass Run Channel
Soft Rubber
75000566 (AS1466) 96” Flexible Glass Run Channel
Soft Rubber
75000636 (AS1198) 96” Flexible Glass Run Channel
Soft Rubber
75000452 (AS1340) 96” Flexible Glass Run Channel
Soft Rubber
75000456 (AS1317) 60” Flexible Glass Run Channel
Soft Rubber
Glass Run Channel
DRAWINGS NOT TO SCALE
75000634 (AS1264) 96” Flexible Glass Run Channel
Soft Rubber
B-D Company Section 8 - Page 8 303.744.1405 1.800.748.2244
Glass Felt Strips
75000085 (M8) 72” Flexible Glass Felt Strip
75000143 (YM3) 96” Flexible Glass Felt Strip
With Chrome Bead
75000148 (YM52) 96” Rigid Glass Felt Strip
With Chrome Bead
75000151 (YM93) 96” Rigid Glass Felt Strip
With Chrome Bead
75000198 (YM108X) 96” Rigid Glass Felt Strip
With Chrome Bead
75001344 (YM169XP) 96” Rigid Glass Felt Strip
With Chrome Bead
75000199 (M113) 96” Flexible Glass Felt Strip
75001346 (MR27X) 96” Rigid Glass Felt Strip
With Chrome Bead
75000193 (YMR13X) 96” Rigid Glass Felt Strip
With Chrome Bead
DRAWINGS NOT TO SCALE
B-D Company Section 8 - Page 9 303.744.1405 1.800.748.2244
Glass Felt Strips
750001379 (MR39X) 96” Rigid Glass Felt Strip
75001369 (MR260X)
96” Rigid Glass Felt Strip
75001625 (M224XP) 96” Rigid Glass Felt Strip
Mohair Channel Liner is a black mohair lining material with rubberized backing. Apply adhesive
to back of liner and bond to badly worn division bars and channels on cars and trucks. Relines
guide bars on lock side of hardtops and convertibles. It can also be cut into shapes and glued to
bases to protect glass desktops and shelves.
DRAWINGS NOT TO SCALE
75001371 (YMR225X)
96” Rigid Glass Felt Strip
Mohair Channel Liner
6112 1-5/8” Wide 50ft Roll 6114 2-5/8" Wide 40ft Roll
B-D Company Section 8 - Page 10 303.744.1405 1.800.748.2244
Glass Setting Tape & Clips
Cork Style Tape
SealStrip All Rubber
720 1/16” Thick (1.58mm) 100ft Roll 760 5/64” Thick 50ft Roll
18352 Window Felt Retainers
18395 Window Felt Retainers
18405 Window Felt Retainers
18775 Inner Window Felt Retainers
10699 Window Felt Retainers
3068 Phillips Oval Head
Screw #4x1/2”
DRAWINGS NOT TO SCALE
Just fold SealStrip over the edge of the glass, insert glass in metal frame or channel, and trim with knife or razor blade. Protects against dirt, moisture and weather, as well as providing insulation against sound and vibration. Turns tight corners easily, yet won’t stretch out of shape. It’s thin enough so that it won’t crowd the glass to cause cracking or breaking.
A4264 1/32” Thick (0.79mm) 100ft Roll A4263 3/64” Thick (1.19mm) 100ft Roll A4262 1/16” Thick (1.58mm) 100ft Roll A4261 3/32” Thick (2.38mm) 100ft Roll
Cork content in rubber glass setting materials makes them compressible, makes a strong setting that is both a cushion and a tight seal. This cork style is just the right proportion of cork and rubber to provide an all-purpose tape with excellent flexibility to conform to the contours of the glass edge.
85-5973 Window Felt Retainers
17469 Stainless Steel Rivet
Sets Flush, Does Not Leave a Raised Stud Diameter: 1/8” Grip: 1/32”-1/8”
Flange Diameter: 1/2”
97-7664 Window Felt Retainers
B-D Company Section 8 - Page 11 303.744.1405 1.800.748.2244
Bulb Seal
DRAWINGS NOT TO SCALE Sold in Half Coils (12’) or Full Coils (24’) 75001612 & 75001614—Sold by the Foot
75000350 75000351
75000354
75000892 75001612 75001614
75001360 75001364
75000352
A
C
Grips Edges from .060” to .170” Thick
Bulb Locations
Part No Bulb Size Bulb Location Roll Size
75001828 3/8” A 12’ or 24’ Coils
75001830 3/8” C 12’ or 24’ Coils
B-D Company Section 8 - Page 12 303.744.1405 1.800.748.2244
Two Piece Glass Setting Rubber
75000440 (AS1216)
Top/Glass: 3/16” to 1/4” Bottom Panel: 1/16” to 5/64” Locking Strip: 75000675 or 75000687 or 75000723
Top/Glass: 1/8” Bottom Panel: 1/16” Locking Strip: 75000607
75000477 (AS1475)
75000667 (AS1035)
Top/Glass: 13/64” to 1/4” Bottom Panel: 1/32” to 1/16” Locking Strip: 75000675 or 75000687 or 75000723
Top/Glass: 7/8” Bottom Panel: 1/8” Locking Strip: 75000675 or 75000687 or 75000723
75000601 (AS1656)
1/4”
75000502 (AS1524) Round Lock Strip Diameter: 1/4” Limited to Stock
101-2255 Chrome Plastic Lock Strip
75000607 (AS1101A) For Use with: 75000477
75000687 (AS937A) For Use with: 75000440 75000601 75000667
75000675 (AS789A) For Use with: 75000440 75000601 75000667
75000723 Chrome Plastic Lock Strip For Use with: 75000440 75000601 75000667
1/4”
101-2250 1/4” Round Lock Strip
DRAWINGS NOT TO SCALE
B-D Company Section 8 - Page 13 303.744.1405 1.800.748.2244
75000690 (AS987)
One Piece Glass Setting Rubber
75000533 (AS1615)
Top/Glass 3/16” to 1/4” Bottom/Panel 1/16” to 3/32”
75000600 (AS1536)
Top/Glass 3/16” to 1/4” Bottom/Panel 3/16” to 1/4”
75000602 (AS1660)
Top/Glass 3/16” to 1/4” Bottom/Panel 1/16” to 1/8”
75000599 (AS1522)
Top/Glass 3/16” to 1/4” Bottom/Panel 1/16”
75000681 (AS893)
Top/Glass 3/16” to 1/4” Bottom/Panel 1/16” to 3/32”
Top/Glass 3/16” to 1/4” Bottom/Panel 3/32” to 9/64”
75000692 (AS990)
Top/Glass 3/16” to 1/4” Bottom/Panel 1/8”
DRAWINGS NOT TO SCALE
B-D Company Section 8 - Page 14 303.744.1405 1.800.748.2244
Windshield Filler & Back Glass Mouldings
108-2243
NO LONGER AVAILABLE
108-2244
NO LONGER AVAILABLE
33/64” 15/32” 9/16”
15681
CRL/409T100B With Butyl
For 1/4” Glass
108-2395 With Butyl
For 1/4” Glass
NO LONGER AVAILABLE
CRL/ET107B With Butyl
For 1/4” Glass
CRL/ET108B With Butyl
For 1/4 Glass
CRL/ET109B With Butyl
For 1/4” Glass
CRL/409T110 With Butyl
For 1/4” Glass
5/8” 3/4”
5/8”
1 1/4” 1”
3/4”
DRAWINGS NOT TO SCALE
B-D Company Section 8 - Page 15 303.744.1405 1.800.748.2244
Glass Setting Channels, EPDM Dense Rubber
4511 4512 4513
4515 4516 4588
4670 4671 4688
For 1/8” Glass Height 11/32” Width at Base 1/4” Inside Base 1/8”
For 3/16” Glass Height 7/16” Width at Base 27/64” Inside Base 3/16”
For 1/4” Glass Height 7/16” Width at Base 31/64” Inside Base 1/4”
For 1/4” Glass Height 9/16” Width at Base 25/64” Inside Base 1/4”
For 3/16” Glass Height 7/16” Width at Base 3/8” Inside Base 3/16”
For 1/4” Glass Height 9/16” Width at Base 7/16” Inside Base 1/4”
For 1/4” Glass For 1/4” Glass For 1/4” Glass
4581
For 1/4” Glass
DRAWINGS NOT TO SCALE
B-D Company Section 8 - Page 16 303.744.1405 1.800.748.2244
.327”
CS324
.384”
.750”
CS128
.750”
CS113
.375”
.188”
.500”
CS150
.500”
CS105
.375”
.438”
CS119
.750”
.375”
.500”
.500”
CS104
.500”
.500”
CS101
CS110
.700”
.500”
Weatherstrip
CS135
.750
.5625”
.625”
.375”
CS103
DRAWINGS NOT TO SCALE
B-D Company Section 8 - Page 17 303.744.1405 1.800.748.2244
.500”
CS2692
.703”
.560”
CS798
.380”
.375”
CS714
.625”
1.00”
CS576
1.00”
CS5896
1.25”
.375”
.625”
.625”
CS2123
.500
.1875”
CS4534
.750”
CS9601
.370”
1.25”
.250”
CS4537
.725”
.850”
CS1935
Weatherstrip
.562”
CS432
.562”
DRAWINGS NOT TO SCALE
B-D Company Section 8 - Page 18 303.744.1405 1.800.748.2244
Weatherstrip
ME40N
1-1
/8”
1/2”
1”
5/8”
ME40S ME59E ME110EF
7/8
”
1”
5/8
7/8”
ME110IJ ME120
11/1
6”
1-1/8”
1-1
/16”
1”
ME040E
3/4”
3/4
”
3/8
”
5/8”
E004
13/16”
3/4
”
E006 E005
11/1
6”
1-1/8”
5/8
”
3/4”
EC100 - With Clips
1-1
/8”
7/16”
E008
55/6
4”
23/32”
E101 E200
3/4”
3/4
”
E201
7/8”
1-3
/32”
E202
1-1/8”
1-1
/16”
7/8”
1-5
/32”
7/8”
E206
1-3
/8”
E203 Limited to Stock
DRAWINGS NOT TO SCALE
B-D Company Section 8 - Page 19 303.744.1405 1.800.748.2244
Weatherstrip
E402
E501
13/1
6”
9/16” 3/8
”
5/8”
E725A With Adhesive
7/1
6”
7/16”
75006001 Superior Latex Foam Seal Wide Neck Design with Medium Height Fills medium gap for tight Seal. “Dynamic”
9/1
6”
7/8”
75006002 Superior Latex Foam Seal Wide Neck Design with Integral Hinge Point and Lower Offset Profile “Dynamic”
13/1
6”
1”
E400
15/1
6”
1/2”
E401
15/1
6”
1/2”
DRAWINGS NOT TO SCALE
Four profiles of our superior foam seal are available in standard 10 foot lengths. The flexible dense rubber core can be used as a backing strip for fasteners or run into an existing grooved channel. Latex Foam Seals can be installed with a backing tape. Profiles can be looped and attached or end sealed using Black Weatherstrip Adhesive (see 3M Section, Part Number 8008 / 8011). The latex foam composition has long been used in luxury automotive applications due to its superior wind, sound, weather, and dust sealing capabilities. These outstanding charac-teristics are exhibited in both dynamic and static applications. The soft latex foam is coated with a tough and durable weather-resistant skin of neoprene and hypalon rubber which provides a supe-rior surface compared to other products. Latex Foam Seals take a less of a “set” and are more for-giving than sponge seals.
B-D Company Section 8 - Page 20 303.744.1405 1.800.748.2244
Weatherstrip
4850
4851
4861
4860
4858
4859
4857
4856
4855
4854
4852
4853
Part Number
Thickness Width
4850 5/32" 3/8"
4851 5/32" 1/2"
4852 5/32" 3/4"
4853 5/32" 1"
Part Number
Thickness Width
4854 5/16" 3/8"
4855 5/16" 1/2"
4856 5/16" 3/4"
4857 5/16" 1"
Part Number
Thickness Width
4858 7/16" 3/8"
4859 7/16" 1/2"
4860 7/16" 3/4"
4861 7/16" 1"
Peel Back Self-Adhesive Sponge Weatherstrip
Extruded Closed Cell Sponge Rubber. Will not absorb water or moisture.
19341 1/8”
3/4”
4740 1/8”
1-1/2”
V-875
1-3/8”
3/16”
Extruded Plastic Fender Welt
4654
4655
4656
Closed Cell Sponge Rubber Windlace Cord Flexible filler for cloth covered windlace on door and windshield pillars and door bottoms.
1/4” 3/8” 1/2”
Closed Cell Half Round Sponge Rubber
1/4”
4736
3/8” 1/2”
4737
4738
9/32”
3/4”
Molded Dense Tee Rubber with Concaved Head
9/32”
1”
4531 4530
DRAWINGS NOT TO SCALE
B-D Company Section 8 - Page 21 303.744.1405 1.800.748.2244
4675
3/4
”
5/8”
4742
13/1
6”
25/32”
4731
11/1
6”
7/8”
4744
5/8
”
1/2”
4745
5/8
”
5/8”
4707
5/8”
11/1
6”
4747
5/8
”
5/8”
4746
9/16”
15/1
6”
4703 13/1
6”
15/16”
4750
1”
1/2”
4749 7/8
”
1”
4712
7/8
”
1-1/8”
4743 1”
1”
16524
3/4
”
7/8”
16525
3/4
”
3/4”
16891
1/2
”
9/16
Sponge Weatherstrip
16892
1”
1-5/16”
16522
1-1/4”
11/1
6”
16523
3/4
”
1”
7/1
6”
20930
1/2”
5/8
”
20929
3/4”
11/1
6”
20928
11/16”
DRAWINGS NOT TO SCALE
B-D Company Section 8 - Page 22 303.744.1405 1.800.748.2244
Bison Grain See Diagram A
for Size
Chrome See Diagram B
for Size
Smooth Vinyl See Diagram A for
Size
Fender Welt is durable, flexible and stylish as well as conforms to the fender's contours without kinking or cracking. Fender Welt will keep water and grime out of area between
your body and fender, helping to prevent rust formation and reduce body-to-fender squeak. All styles come weather-resistant.
Perfect for customizing street rods or dressing up antique cars. Great as a finishing
touch on ground effects kits, running boards, etc.
3/16”
1-1/2” 1-1/4”
1-3/8”
3/1
6”
Extruded Smooth Plastic See Diagram C for Size
1/4”
DRAWINGS NOT TO SCALE
Fender Welt