ez dock accessories catalog - ez dock...

EZ Dock

Standard Accessories CatalogSpring 2011

This page intentionally left blank

Standard Accessories Catalog - Spring 2011

Table of Contents

EZ Dockwww.midatlanticdocks.com 856-468-3737

12 Inch Cleat 18 Inch Cleat 1Aluminum Railing 1Auger 1Corner Dock Wheel Kit 2Corner Gussets 2Corner Storage Box 2Coupler Set 2Coupler Socket Adapter 3Deadweight - Light Duty 3Deadweight Winch Insert - Heavy Duty 3Dock Box 3Dock Bumper Kit 4Dock Curbing 4Dock Edging 4Dock Wheels 4EZ Launch 5Galvanized Railing 5Hinge Kit 5Hydrophobic Vent and Drill Kit 5In Water Installation Tool 6Inside Utility Channel 6Outside Utility Channel 6Piling Bracket - Heavy Duty 6Piling Bracket - Std Galvanized 7Pipe Bracket - Heavy Duty 7Pipe Bracket - Standard 7Pocket Filler 7Pocket Filler - Glow in the Dark 8Polyethylene Bench 8Polyethylene Gangway 8Polyethylene Ladder 8Powder Coated Railings 9Sliding Board 9Stand Off Bracket 9Stiff Arm Assembly 9Supplemental Flotation 10Transition Kit 10Utility Channel 10

This page intentionally left blank

Standard Accessories Catalog - Spring 2011EZ Dock Page

1

1

Auger

www.midatlanticdocks.com 856-468-3737

EZ Dock Wood Dock Metal Dock

Works With:

Item Description:

Item number:Item Name:30011212 Inch Cleat

This 12 inch galvanized cleat uses standard EZ Dock Hardware Connectors to anchor to any pocket on the dock.

Works With:

Item Description:

Item number:Item Name:3001008 Inch Cleat

EZ Dock tie down cleats attach to heavy-duty stainless steel T-nuts molded in pairs around dock section perimeters. Cleats are 8 inches long and have the strength to permit lifting multiple dock sections by cables without any dam-age to the cleats or anchor bolt receivers. Also available is a 12” cleat made of galvanized steel.

Works With:

Item Description:

Item number:Item Name:100910ALAluminum Railing

Aluminum railings are available for any EZ Dock section. Several different styles are available on display at www.ezdockusa.com. Part number displayed here is for 10 foot aluminum railing that uses 8 hardware connectors to secure to EZ Dock pockets.

Works With:

Item Description:

Item number:Item Name:100255 100355Auger

3” Auger with bolt and nut allows for drilling and setting pipe in lake, river or ocean bottoms. Pipe sold separately. 2” Auger available - $28 and weight 2 lbs

Standard Accessories Catalog - Spring 2011EZ Dock Page 2

2

Corner Dock Wheel Kit



Works With:

Item Description:

Item number:Item Name:300537Corner Dock Wheel Kit

Mounting to any open coupler pocket this wheel is designed to guide your boat into the slip by allowing the wheel to roll along the side of your boat.

Works With:

Item Description:

Item number:Item Name:300501Corner Gussets

Corner Gusset provided for use when two dock sections are joined and a 90 degree angle formed. Typical use is for placement on finger docks attached to primary dock - adds significant stability to the finger docks and increases safety by reducing the problems when walking corners on the dock system.

Works With:

Item Description:

Item number:Item Name:400755Corner Storage Box

Our corner storage box has roomy storage in a compact design that makes the most of available space without interfering with foot traffic as it has the same foot print of the Corner Gusset 300501. Connection boxes for complete utility hookups through this box are also available.

Works With:

Item Description:

Item number:Item Name:301100Coupler Set

The coupler includes the top and bottom coupler as well as the nut and bolt holding the coupler in place. Created from recycled car tires the coupler is the “key” to an EZ Dock system withstanding severe weather conditions including hurricane level storms while other dock systems fail. While extremely strong the coupler allows movement of the docks in rough water allowing for heavy sea activity.


3

3

Dock Box



Works With:

Item Description:

Item number:Item Name:900005Coupler Socket Adapter

The EZ Dock Coupler nut requires a special adapter that is used with a 3/4 socket drive. This socket adapter is inexpensive but serves as an anti-theft de-vice since you cannot easily uncouple the docks without it.

Works With:

Item Description:

Item number:Item Name:100740Deadweight - Light Duty

For light-duty anchoring with chain. Chain and actual anchor material sold separately. Common anchors include mushroom anchors, concrete blocks, etc.

Works With:

Item Description:

Item number:Item Name:210350 100730Deadweight Winch Insert - Heavy Duty

Deadweight insert and cable winch added to our polyethylene pipe bracket al-lows easy dock adjustment for water fluctuations. Cable sold separately.

Works With:

Item Description:

Item number:Item Name:300750Dock Box

Our rectangular dock box has roomy storage in a compact heavy duty design. The box measurements are 30 inches (height), 36 inches (long) and 27 inches (deep).


4

Dock Bumper Kit



Works With:

Item Description:

Item number:Item Name:300180Dock Bumper Kit

The dock bumper comes complete, ready to install onto any dock using the cleat holes to attach to an EZ Dock. The dock bumper is made of the same material as EZ Dock and is not soft. If you are planning on using a bumper to serve as a cushion for your boat and you want to avoid scratches in your paint use a soft bumper from any marine supply store and tie it to the EZ Dock cleat.

Works With:

Item Description:

Item number:Item Name:35116Dock Curbing

Constructed of polyethylene, EZ Dock security curbing provides a safe border around dock edges for wheelchairs. The dark brown color provides a matching contrast for easy visibility for your dock. Secures to dock using standard cleat receivers.

Works With:

Item Description:

Item number:Item Name:400117Dock Edging

Constructed of durable vinyl, EZ Dock edging provides a soft cushion to protect water vessels from the sides of docks and vise versa. Using the standard cleat holes the edging is secured with stainless steel bolts. Available in 10 foot lengths.

Works With:

Item Description:

Item number:Item Name:900050Dock Wheels

Two large plastic tires with tread to use when moving docks. Wheels can be attached to any pockets (2 of them in set - one for each side of the dock) using standard hardware connectors. One set of wheels can move two or three docks coupled together. They can be use to put docks in the water or removing docks and the wheels can be detached on land or in the water.


5

5

Hydrophobic Vent and Drill Kit



Works With:

Item Description:

Item number:Item Name:500900LEZ Launch

EZ Dock now provides a stable and durable system for boarding and exiting kayaks. Designed to be especially valuable for seniors or anyone that could benefit in assistance for launching or recovering from kayak or canoe activities the system provides a dry and safe platform.Any size dock configuration can be used to attach the EZ Launch.

Works With:

Item Description:

Item number:Item Name:100910Galvanized Railing

Our modular railing conforms with SOBA and ADA guidelines. Railing sec-tions are available in a variety of lengths and profiles designed to provide security with minimal obstruction. Choose the standard hot-dipped galvanized finish, or optional powder-coated finish for added color and enjoyment. Part number displayed here is for 10 foot galvanized railing that uses 8 hardware connectors to secure to EZ Dock pockets.

Works With:

Item Description:

Item number:Item Name:100750Hinge Kit

The reversible Hinge Kit allows you to bolt EZ Port PWC lifts or EZ Dock sec-tions to other types of floating docks. Made of galvanized steel it is designed for use in fresh or salt water.

Works With:

Item Description:

Item number:Item Name:9000028, 9000029Hydrophobic Vent and Drill Kit

This new EZ Dock Hydrophobic vent (9000028). is designed to allow the dock/port sections to breath but will not allow water in pass through. The new vent will be factory installed in one of the spin weld areas. In addition these vents can be purchased to retro fit older dock sections in the field using only a drill .A Drill and Tap Kit is also available (9000029) and comes with a 7/16” drill bit and a 1/4” NPT tap (this TAP threads the 1/2” hole into which the vent is threaded).


6

In Water Installation Tool



Works With:

Item Description:

Item number:Item Name:900010In Water Installation Tool

This tool allows you to assemble docks together with the EZ Dock couplers without getting in the water.

Works With:

Item Description:

Item number:Item Name:302030Inside Utility Channel

EZ Dock Utility Channel Inside Corner Utility conduit can be tucked neatly inside two-piece chase attached at junction of dock sections. Available with stainless-steel hardware.

Works With:

Item Description:

Item number:Item Name:302040Outside Utility Channel

The corner utility channel allows for convenient installation where dock layouts require conduit to be installed around the outside corner of a dock section. Available with stainless-steel hardware for your specific application needs.

Works With:

Item Description:

Item number:Item Name:300800Piling Bracket - Heavy Duty

Heavy-duty polyethylene bracket allows lateral position adjustment to attach to piles up to 18” in diameter. Included are 3 rollers that can be adjusted to the diameter of the piling and new rubber “torpedo” roller covers now eliminate the wear on pilings in rough water conditions.


7

7

Pocket Filler



Works With:

Item Description:

Item number:Item Name:100800Piling Bracket - Std Galvanized

Mainframe piling bracket is pre-drilled for hoops from 4” to 24” wide. Includes connectors with nuts. Hoops sold separately and range in size from 4 inches ID to 24” ID .

Works With:

Item Description:

Item number:Item Name:210250 210350Pipe Bracket - Heavy Duty

Heavy-duty polyethylene pipe bracket allows floating boat docks to adjust to changing water levels. Designed for either 2 1/2 inch or 3 1/2 inch OD pipes it has a removable insert that can be replaced when worn. Designed for rough water applications and uses the standard EZ Dock Couplers which are included in the package.

Works With:

Item Description:

Item number:Item Name:130250 130350Pipe Bracket - Standard

Standard-duty bracket provides ample anchoring for EZ Port PWC lifts, or for smaller docks in moderate water conditions (lakes, lagoons, calm water appli-cations). Designed for use with either 2 1/2 inch or 3 1/2 inch OD pipe. Easily installed, no special tools required.

Works With:

Item Description:

Item number:Item Name:201030Pocket Filler

If you prefer to have a solid dock along the edges the pocket filler can be inserted easily and it will hold in place based on the design of “tabs” on either side of the pocket filler. It can be removed by simply using a screwdriver to pry an edge up and used again by replacing the two tabs held by a screw.The pocket fillers are a similar color as the EZ Dock system


8

Pocket Filler - Glow in the Dark



Works With:

Item Description:

Item number:Item Name:201030-GIDPocket Filler - Glow in the Dark

These new pocket fillers are the same as the standard EZ Dock pocket filler but have a strong glow in the dark that will stay glowing till dawn.With a charge time of 15 minutes and a half glow life of 2.5 hours they will provide visibility to any EZ Dock installation.

Works With:

Item Description:

Item number:Item Name:300970Polyethylene Bench

This poly bench mounts to any EZ Dock system using the standard hardware connectors. The bench is available with our without arms (this product num-ber includes arms). Combine this with the Umbrella Bracket and you have the perfect place to view the water from the dock.

Works With:

Item Description:

Item number:Item Name:400406 400460Polyethylene Gangway

The poly gangway is 5 ft. wide and is available in either 6 ft., 12 ft. or 18 ft. length. You can have handrails on one or both sides, roller, hinge plate, transi-tion plate. A hinge (400460) to the EZ Dock connection is available . An alumi-num truss kit is required to create 12 ft (401412) or 18 ft (410418) length and is priced separately.

Works With:

Item Description:

Item number:Item Name:300260 300270Polyethylene Ladder

This five step poly ladder is designed to attach to any EZ Dock installation using standard ladder connectors. Recommended for fresh water applications where salt water marine growth does not occur. If you are in a salt water envi-ronment we recommend the FloatStep ladder mentioned in this accessory page and expanded in a separate entry for the accessories in more detail.


9

9

Stiff Arm Assembly



Works With:

Item Description:

Item number:Item Name:105910Powder Coated Railings

Powder coated railings are available for any EZ Dock section. Several different styles are available on display at www.ezdockusa.com and choice of colors. Part number displayed here is for 10 foot powder coated railing that uses 8 hard-ware connectors to secure to EZ Dock pockets. Railings also come in 40, 60, and 80 inch lengths.

Works With:

Item Description:

Item number:Item Name:300600Sliding Board

This rugged slide can be mounted on two EZ Dock 80 inch X 10 foot docks coupled together. It is a rubber coated slide with steps and mounting hardware for any EZ Dock system. A pump and hose is included to allow children or adults to lubricate the slide at the top. Available in blue or green this commer-cial strength slide is provided by our sister company - PlayPower.

Works With:

Item Description:

Item number:Item Name:105100Stand Off Bracket

Polyurethane bracket attaches top of pipe to stationary docks. Fits pipe from 2.5” to 3.5” O.D. and stabilizes the top of the pipe to something close (ie. Piling, Fixed Dock, Bulkhead, etc.)

Works With:

Item Description:

Item number:Item Name:800099Stiff Arm Assembly

Anchor to a shoreline abutment or to a shoreline post with our heavy-duty stiff-arm. The length of the connecting arm is determined by the distance you desire from the land anchor point to the dock.


10

Supplemental Flotation



Works With:

Item Description:

Item number:Item Name:206013FL 208014FLSupplemental Flotation

Supplemental flotation attaches under dock sections and EZ Port lifts to in-crease flotation capacity where certain applications may need to support extra weight. Note - two different sizes for EZ Port 4 versus EZ Port 3 and dock sec-tions.

Works With:

Item Description:

Item number:Item Name:100717 100718Transition Kit

If you need to “bridge” a gap in the dock this product may be the answer. Also available with two planks for part #100718, 75 lbs.

Works With:

Item Description:

Item number:Item Name:301260 302060Utility Channel

Utility channel is available in both 12 and 20 inch width in 5 foot lengths and offer either one or two open channels to run power conduit and water to the dock. Other common uses include using it as a filler between pilings to allow easy boarding of boats that dock across pilings or to allow pilings inside the EZ Dock sections for more live dock when securing boats.

ez dock accessories catalog - ez dock...

Documents