f - ceiling diffusers

7/29/2019 F - Ceiling Diffusers

1/25

FLOW ~ T E C HAI R D IS T R IBUT ION S PEC IAL I S T

SCD Supply Ceiling DiffuserRCD Return Ceiling DiffuserPCD Perforated Ceiling DiffuserCED Combined Ceiling Diffuser

with Egg Crate Core

FAISAL JASSIM INDUSTRIES (L.L.C.)P 0. Box: I 871 Dubai, U.A.E.

Tel: +971 4 Z582 64 0Fax: +971 4 8 2 6 ~ 1

E-mail: [email protected]: www.faisaljassim.ae

www.flowtechind.com


2/25

CEILING DIFFUSERSA I R D I S T R I B U T I O N S P E C I A L I S T

APPLICATIONS

FLOWTECH provides a wide range of Ceiling Diffusers

to suite the various requirements of ceiling air

distribution.

Supply air ceiling diffusers (SCD) and return air ceiling

diffusers (RCD) can be Square or Rectangular Ceiling

Diffusers with One, Two, Three or Four Way Patterns.

The different diffuser patterns are used to control

supply air direction. Typical examples of such

application are supply diffusers near glass areas, supply

diffusers in corridors, and supply diffusers in space

corners.

FLOWTECH SCD is supplied with Opposed Blades

Damper (OBD) to facilitate for precise air volume

control. (Note: OBD is used for fine tuning of air

volume flow rate, and should not be used to replace

branch Volume Control Damper). RCD is supplied

without OBD and usually used for return air

applications. In certain applications, SCD must be used

as return air diffuser; that is, where return air volume

requires precise control, such as room pressurization

applications. This is frequently required for Clean Room

Engineering applications such as Hospitals,

Pharmaceutical Plants, Biotech Laboratories, Computer

Rooms and Silicon Industry.

SCD and RCD are commonly used for Heating,

Cooling and Isothermal Ventilation applications.

However, such applications are limited to 4 meters

ceiling high. For Ceiling Heights above 4.0 Meters, refer

to specialty terminal devices, such as Jet Nozzle

Diffusers and Drop Ceiling Diffusers.

SCD and RCD are tested by ETL Semko USA to

ASHRAE 70 - 1991 standard method of testing for

rating performance of air outlets and inlets.

Perforated ceiling diffuser (PCD) is of same

construction as SCD but with a removable perforated

face of G1 sheet powder coated, or aluminium sheet as

optional.

Supply Air 4 Way ceiling diffuser (SCD-4S)

Supply Air 3 Way ceiling diffuser (SCD-3S)

4 Way supply ceiling diffuser with perforated face (PCD)

Return Air Rectangular 4 way ceiling diffuser (RCD- 4R)

F-1Rev. 0:2005/1


3/25

F L O W ~ E C HA IR DISTR I BUTION S PEC IAL I S T

MATERIAL: Opposed Blades Damper (OBD):Frame and Core are made of extrudedaluminum alloy 6063 to T6 Heat Treatment. FLOWTECH OBD is fixed to the rear frame of SCDmodel by means of "S" clamp for ease of removal andrigid construction.The Opposed Blades Damper is extrudedaluminum alloy 6063/T6.Mitred ComerSpring loaded core

To adjust the OBD opening, remove the core and tumthe adjustment screw ava ilab le at the front face of thedamper (Clockwise to open I Counter Clockwise toClose) .

(A)-12 mm- g ~ ~ F - ~ ~I

(A)+66mm(A)+ I45mm

_ __ - Multi pattern ceiling diffuse r section without damper (RCD)

(A)-12 mm

J\J\1\J\J\ EEj ; : : : = . ~ = ; ; ~ : : = ~ ~ ~ ~ ~ -...~ - - - ~ - - ~ - - ~ ~ - - ~ ~ - - ~ ~ - - ~ - - - - ~ - - ~ - -- ! - - ~ - - - - + l

- Multi pattern ce iling d1ffuser section with damper (SCD)

Square ce iling diffusers Rectangular ceiling diffusersNeck Size Face Size Ax B Size (mm)ISO x ISO 295 X 295 225 X ISO 375 X 30022S X 22S 370 X 370 300 X ISO 450 X 300300 X 300 445 X 445 37S X ISO 525 X 3004SO x ISO 600 X 30037S X 37S 520 X 520 S2S X ISO 670 X 3004S0 X 450 595 X 595 300 X 22S 450 X 375S2S X S2S 670 X 670 375 X 225 525 X 3754S0 X 22S 600 X 375600 X 600 745 X 745 S25 X 225 670 X 375

F-2 Rev.0:2005/ I


4/25

F L O W ~ E C HA IR D IST R IBUTION S PEC IAL I S T

Available in Powder coated RAL 9010 or.as standerd color 9016 ( __.- By self tapping screw through the ned


5/25


4 WAY DISCHARGE

2 WAY DISCHARGE

1 WAY DISCHARGE

Square (SCD-4S) Rectangular (SCD-4R) Square (SCD-3S)

3 WAY DISCHARGE

Rectangular (SCD-3R)

Square (SCD-2S) Corner (SCD-2SC) Rectangular

Vertical (SCD-2RV)

Rectangular

Horizontal (SCD-2RH)

Square (SCD-1S) Rectangular

Vertical (SCD-1RV)

Rectangular

Horizontal (SCD-1RH)

MULTI PATTERN CEILING DIFFUSERS

F-4 Rev. 0:2005/1


6/25

FLOW ' -TECHAIR D I S TR IBUT ION S PEC IAL I S T

_ Perforated Cei ling Diffuser (PCD)

Product Features:

This product is designed to provide laminar flow withlow velocit ies, evenly distributed downward movingconditioned air.

Accessories:

The perforated ceiling diffuser is especially effective inareas with heavy, localized intemal loads, as incomputer rooms. The column of air delivered by theperforated ceiling diffuser cools t he load sourcedirectly without generating high velocities in theoccupied space.

Opposed blade damper for supply (optional)- OBDThe special ly designed blad es have an overlapping lipwhich assure a tight closure.

Equalizing grid (optional) - EGIndividually adjustable blades, to provide precisedirectional control of air t hrough the diffuser.

Control is done by adjustment screw through the face ofdiffuser.Material: Extruded aluminum construction.

Rev. 0:2005/ I

Nylon tension bushes.Extruded aluminum construction.

F-5


7/25

AIR D I S TR I B UTION S PEC IAL I S T

- - Combined Ceiling Diffusers (CED)

(A)-12 mmGasket (optional) I. 73921I II (A)+ 145mm

I 3B mm I I~ - - - - - - - ; ; : ; ;~133mm I

Side Section of Combined Ceiling Diffusers (CED)

Product Feature s: Standard Sizes: This model is des igne d to handle both supply and (Use any combination of ength & width)return air requirements in a single unit. Conditioned air is supplied at the outer perimeter,and the retum is through the center core. The center core which ist he ret urn part is made ofaluminium egg crate grid (CEO), the size can bedetermined according t o the supply and return airflow requirements.

The mi nimum size of he ce nte r core is 75mm, themaximum size is equal to the nominal size of thecombined ce iling diffuser minus 75mm, howeverthe size ofthe core must be in steps of 75mm.Available types of finishing:

Powder coated (painted to RAL codes)

F-6

Length A (mm) Width B (mm)300 300375 375450 450525 525600 600

To convert into Imperial un its use (I inch=25mm)Non standard sizes are avai lable upon requestCore size to be mentioned separately

Rev. 0:2005/ I


8/25

A IR DISTR IBUT ION S PEC IAL I S T

DOD-DO- A X B - DODDI I I I

~ RAL CodeCo lor

Width in mm oinch

Length in mmor inch

SCD or RCD - 4S : 4 Way Square D iffuserSCD or RCD - 4R : 4 Way Rectangular DiffuserSCD or RCD - 3S : 3 Way Squa re D iffuserSCD or RCD- 3R : 3 Way Rectangular DiffuserSCD or RCD - 2S : 2 Way Square DiffuserSCD or RCD- 2RV: 2 Way Rectangular VerticalSCD or RCD - 2RH: 2 Way Rectangular HorizontalSCD or RCD - I S : I Way Square DiffuserSCD or RCD - IRV: I Way Rectangular VerticalSCD or RCD - IRH : I Way Rectangular HorizontalPCD : Perforated Ceiling DiffuserCED : Comb ined Ceiling Diffuser

with Egg Crate Core Pattem.

SCD-4S-300mm X 300mm-9010Stands fo r Sup ply Ceiling Diffuser, 4W ay, 300x300coat ing color RAL 90 I0.

Rev. 0:2005/1 E-7


9/25


GENERAL NOTES

Pages onwards give performance data for all models

and variants, and unless otherwise stated the following

general notes apply:

1 Throws shown are to three terminal velocity of

0.25m/s, 0.5m/s, 0.75m/s, (50fpm, 100fpm,

150fpm) with coanda effect across a flat ceiling,

and with supply air at conditions with max

DT=10K cooling.

2 For standard room height of 2.75 metres, throws

should be taken as the distance to the nearest wall

(minimum plan dimension, MPD), or to half thedistance between diffuser centres.

4 When mounted without a surrounding closed

ceiling the throw will be reduced by approx. 40%,

ie throw = table throw x 0.6

However in order to avoid the airflow 'dumping'

into the space when on cooling mode, giving

excessive velocities, it may be necessary for coanda

plates to be fitted to the diffuser. Please check with

factory for details.

5 Another fault that can give rise to 'dumping' on

cooling cycles is low jet velocities at the diffuser

core. In order to avoid this it is advisable to ensure

that neck velocities do not drop below 0.75m/s,

(150fpm).

6 The accoustical data were tested in accordance to

ASHRAE 70-1991 standard. The octave band

sound power levels obtained were plotted to

determine the point of tangency with the highest

rank Noise Criteria curve (NC) to establish the

NC. Noise Criteria ratings were determined by

subtracting room absorption of 10dB from the

sound power level data.

7 NC, and Pressure values shown, are based on a

diffuser complete unit with an opposed blade

damper in the fully open position for the supply

diffuser and without for the return diffuser. The

damper should only be used for fine balancing, as

for every doubling of pressure there is a resulting

increase in the noise level of +9dB for supply, or

+5dB for exhaust.

8 Models with reduced necks.

There is a 'dilution effect' on performance for these

models, as the air tends to spread behind the core,

reducing throws by up to 20%, depending on therelationship between the neck size and the base

diffuser size. For more information please check

with the factory.

9 For rectangular diffusers, throw values tested are on

the longer side of the diffusers. For the shorter side

throws, values are to be multiplied by 0.72.

10 Corrections for 1, 2 and 3 way diffusers

3 way pattern throw : Multiply by 1.15



11 The following tables include the results of tests

conducted on samples of air terminals. The test

results include Noise Criteria (NC), static pressure

verses air flow, throw and effective area.

Extrapolation was used to obtain the performance

for other sizes and other parameters within the

range of products mentioned above.

Test method included in ETL report.

F-8 Rev. 0:2005/1


10/25


PERFORMANCE DATA - SI UNITS

SYMBOLS

L/Sec :Air volume in litres per second.

Af :Effective free area in square meters.

Vf :Face velocity in meters per second.

Ak :Neck area in square meters.

Vk :Neck velocity in meters per second.

Pt :Total pressure in pascal

Th. :Throw in meters.

NC :Noise Criteria.

NOTES

The large throw values are based on the minimum

terminal velocity of 0.25 m/Sec. The middle throw values are based on the medium

terminal velocity of 0.50 m/Sec.

The small throw values are based on the maximum

terminal velocity of 0.75 m/Sec.

CONDITIONS

Supply or Return as indicated.

Noise Criteria values are based on (10 dB) room

attenuation.

Damper is fully open.

Maximum room height = 4.0m

Cooling @ T = 10k

CORRECTION FOR 1, 2 AND 3 WAY

Noise criteria : No correction required.

Pressure : No correction required.

Throw : 3 way - increase for 15%: 2 way - increase for 25%

: 1 way - increase for 45%

Drop : No correction required.

F-9Rev. 0:2005/1

ETL TEST REPORTS


11/25

See notes on page F-9

SIZE

(mmxmm)

NECK

AREA

(m2)

FREE

AREA

(m2)

NECK

VELOCITY (m/s)1.00 1.50 2.00 2.25 2.50 2.75 3.00 3.50 4.00

150x150 0.019 0.009

Q (L/s) 19 29 38 43 48 52 57 67 76

Vf (m/s) 2.13 3.19 4.26 4.79 5.32 5.85 6.38 7.45 8.51

Pt (Pa) 3 7 13 17 21 29 38 41 52

Throw (m) 0.9 1.2 2.4 1.2 1.8 3.4 1.8 2.7 4 .2 2.0 3.0 4 .5 2.1 3.3 4.8 2.4 3.5 4 .9 2.7 3.6 4.9 3.0 3.9 5 .4 3.3 4.2 5 .4

NC


12/25

See notes on page F-9 Contd...

A I R D I S T R I B U T I O N S P E C I A L I S T

CEILLING DIFFUSERS

F-11Rev. 0:2005/1

SUPPLY AIR CEILING DIFFUSER, 4 WAY - (SCD - 4R) SI - UNITS

SIZE

(mmxmm)

NECK

AREA

(m2)

FREE

AREA

(m2)

NECK

VELOCITY (m/s)1.00 1.50 2.00 2.25 2.50 2.75 3.00 3.50 4.00

225x150 0.029 0.014

Q (L/s) 29 44 59 66 73 81 88 103 118

Vf (m/s) 2.17 3.25 4.33 4.87 5.41 5.96 6.50 7.58 8.66

Pt (Pa) 2 3 7 12 17 23 29 38 51

Throw (m) 1.2 1.8 3.3 1.8 2.4 4.2 2.4 3.3 5 .1 2.7 3.6 5 .6 3.0 3.9 6.0 3.3 4.2 6 .3 3.6 4.5 6.6 4.2 5.1 7 .2 4.5 5.4 7 .5

NC


13/25


CEILLING DIFFUSERS


F-12Rev. 0:2005/1

SIZE

(mmxmm)

NECK

AREA

(m2)

FREE

AREA

(m2)

NECK

VELOCITY (m/s)1.00 1.50 2.00 2.25 2.50 2.75 3.00 3.50 4.00

375x225 0.077 0.034

Q (L/s) 77 116 155 174 193 213 232 271 309

Vf (m/s) 2.29 3.43 4.58 5.15 5.72 6.29 6.87 8.01 9.15

Pt (Pa) 3 4 9 13 17 21 26 33 42

Throw (m) 1.8 2.7 4.5 2.7 3.9 6.9 3.6 5.1 7 .8 5.4 5.4 8.3 7.2 5.7 8.7 6.2 6.0 9 .2 5.1 6.3 9 .6 5.7 6.9 11.0 6.6 7.8 11.0

NC


14/25


CEILLING DIFFUSERS


F-13Rev. 0:2005/1

SIZE

(mmxmm)

NECK

AREA

(m2)

FREE

AREA

(m2)

NECK

VELOCITY (m/s)1.00 1.50 2.00 2.25 2.50 2.75 3.00 3.50 4.00

600x300 0.169 0.069

Q (L/s) 169 254 339 381 423 466 508 593 677Vf (m/s) 2.47 3.71 4.94 5.56 6.18 6.80 7.41 8.65 9.88Pt (Pa) 3 4 9 13 17 21 26 36 50

Throw (m) 2.4 3.3 7.2 3.9 6.0 9.3 5.7 7.8 11.0 6.3 8.3 12.2 6.9 8.7 13.0 7.4 9.2 13.5 7.8 9.6 14.0 8.4 11.0 15.0 9.0 11.0 17.0

NC


15/25


CEILLING DIFFUSERS

SIZE

(mmxmm)

NECK

AREA

(m2)

NECK

VELOCITY

(m/s)

1.00 1.50 2.00 2.25 2.50 2.75 3.00 3.50 4.00

150x150 0.019Q (L/s) 19 29 38 43 48 52 57 67 76

Pt (Pa) 8 12 18 20 21 22 24 35 45

NC


16/25


CEILLING DIFFUSERS

SIZE

(mmxmm)

NECK

AREA

(m2)

NECK

VELOCITY

(m/s)

1.00 1.50 2.00 2.25 2.50 2.75 3.00 3.50 4.00

225x150 0.029

Q (L/s) 29 44 59 66 73 81 88 103 118

Pt (Pa) 10 14 20 22 23 30 37 55 75

NC


17/25


CEILLING DIFFUSERS

SIZE

(mmxmm)

NECK

AREA

(m2)

NECK

VELOCITY

(m/s)

1.00 1.50 2.00 2.25 2.50 2.75 3.00 3.50 4.00

525x300 0.148Q (L/s) 148 222 295 332 369 406 443 517 591

Pt (Pa) 10 14 20 22 23 30 37 55 75

NC


18/25


PERFORMANCE DATA - IP UNITS

SYMBOLS

CFM :Air volume in cubic feet per minute.

Af :Effective free area in square feet.

Vf :Face velocity in feet per minute.

Ak :Neck area in square feet.

Vk :Neck velocity in feet per minute.

Pt :Total pressure in inches water gauge.

Th. :Throw in feet

NC :Noise Criteria.

NOTES

The large throw values are based on the minimum

terminal velocity of 50 fpm. The middle throw values are based on the medium

terminal velocity of 100 fpm.

The small throw values are based on the maximum

terminal velocity of 150 fpm.

CONDITIONS

Supply or Return as indicated.

Noise Criteria values are based on (10 dB) room

attenuation.

Damper is fully open.

Maximum room height = 4.0m

Cooling @ T = 10K

CORRECTION FOR 1, 2 AND 3 WAY

Noise criteria : No correction required.

Pressure : No correction required.

Throw : 3 way - increase for 15%



Drop : No correction required.

Notes:

F-17Rev. 0:2005/1


19/25


SIZE

(in x in)

NECK

AREA

(SQ.FT.)

FREE

AREA

(SQ.FT.)

NECK

VELOCITY (fpm)200 300 400 450 500 550 600 700 800

6x6 0.205 0.096

Q (CFM) 40 61 81 91 101 111 121 141 161Vf (fpm) 426 638 851 957 1064 1170 1277 1489 1702

Pt (in-wg) 0.014 0.030 0.054 0.069 0.083 0.118 0.152 0.164 0.209Throw (ft) 3 4 8 4 6 11 6 9 14 6 10 15 7 11 16 8 11 16 9 12 16 10 13 18 11 14 18

NC


20/25



CEILLING DIFFUSERS

F-19Rev. 0:2005/1

SUPPLY AIR CEILING DIFFUSER, 4 WAY - (SCD - 4R) IP - UNITS

SIZE

(in x in)

NECK

AREA(SQ.FT.)

FREE

AREA(SQ.FT.)

NECK

VELOCITY (fpm)200 300 400 450 500 550 600 700 800

9x6 0.316 0.146

Q (CFM) 62 93 125 140 156 171 187 218 249

Vf (fpm) 433 650 866 975 1083 1191 1299 1516 1733Pt (in-wg) 0.008 0.014 0.029 0.049 0.069 0.094 0.118 0.152 0.207Throw (ft) 4 6 11 6 8 14 8 11 17 9 12 18 10 13 20 11 14 21 12 15 22 14 17 24 15 18 25

NC


21/25



CEILLING DIFFUSERS

F-20Rev. 0:2005/1

SIZE

(in x in)

NECK

AREA

(SQ.FT.)

FREE

AREA

(SQ.FT.)

NECK

VELOCITY (fpm)200 300 400 450 500 550 600 700 800

15x9 0.832 0.363

Q (CFM) 164 246 328 369 410 451 492 574 656Vf (fpm) 458 687 915 1030 1144 1259 1373 1602 1831

Pt (in-wg) 0.010 0.014 0.037 0.052 0.066 0.085 0.104 0.134 0.170Throw (ft) 6 9 15 9 13 23 12 17 26 18 18 27 24 19 29 20 20 30 17 21 31 19 23 34 22 26 37

NC


22/25



CEILLING DIFFUSERS

F-21Rev. 0:2005/1

SIZE

(in x in)

NECK

AREA

(SQ.FT.)

FREE

AREA

(SQ.FT.)

NECK

VELOCITY (fpm)200 300 400 450 500 550 600 700 800

24x12 1.823 0.737

Q (CFM) 359 539 718 808 898 987 1077 1257 1436Vf (fpm) 494 741 988 1112 1235 1359 1483 1730 1977

Pt (in-wg) 0.010 0.014 0.037 0.052 0.066 0.085 0.104 0.145 0.199

Throw (ft) 8 11 24 13 20 31 19 26 37 21 27 40 23 29 42 24 30 44 26 31 46 28 34 50 30 37 55

NC


23/25


CEILLING DIFFUSERS

SIZE(in x in)

NECK

AREA(SQ.FT.)

NECK

VELOCITY(fpm)

200 300 400 450 500 550 600 700 800

6x6 0.205Q (CFM) 40 61 81 91 101 111 121 141 161

Pt (in-wg) 0.032 0.048 0.072 0.078 0.084 0.090 0.095 0.141 0.181

NC


24/25


CEILLING DIFFUSERS

SIZE(in x in)

NECK

AREA(SQ.FT.)

NECK

VELOCITY(fpm)

200 300 400 450 500 550 600 700 800

9x6 0.316Q (CFM) 62 93 125 140 156 171 187 218 249

Pt (in-wg) 0.040 0.056 0.080 0.086 0.092 0.120 0.149 0.221 0.301

NC


25/25



CEILLING DIFFUSERS

SIZE

(in x in)

NECK

AREA

(SQ.FT.)

NECK

VELOCITY

(fpm)

200 300 400 450 500 550 600 700 800

24x12 1.823Q (CFM) 359 539 718 808 898 987 1077 1257 1436

Pt (in-wg) 0.040 0.056 0.080 0.086 0.092 0.120 0.149 0.221 0.301

NC 15 18 21 26 30 34 37 43 49

18x15 1.712Q (CFM) 337 506 674 758 843 927 1011 1180 1348

Pt (in-wg) 0.040 0.056 0.080 0.086 0.092 0.120 0.149 0.221 0.301

NC 15 17 20 25 29 33 37 43 49

21x15 2.005Q (CFM) 395 592 790 887 987 1085 1184 1382 1579

Pt (in-wg) 0.040 0.056 0.080 0.086 0.092 0.120 0.149 0.221 0.301

NC 16 18 21 26 31 35 38 44 50

24x15 2.298Q (CFM) 453 679 905 1018 1131 1243 1358 1584 1810

Pt (in-wg) 0.040 0.056 0.080 0.086 0.092 0.120 0.149 0.221 0.301

NC 17 18 22 27 32 36 39 45 51

21x18 2.419Q (CFM) 476 715 953 1072 1191 1309 1429 1667 1905

Pt (in-wg) 0.040 0.056 0.080 0.086 0.092 0.120 0.149 0.221 0.301

NC 17 19 22 27 32 36 39 45 51

24x18 2.772Q (CFM) 546 819 1092 1227 1365 1501 1638 1911 2184

Pt (in-wg) 0.040 0.056 0.080 0.086 0.092 0.120 0.149 0.221 0.301

NC 18 20 23 28 33 37 40 46 52

24x21 3.247Q (CFM) 639 959 1279 1438 1599 1759 1918 2238 2558

Pt (in-wg) 0.040 0.056 0.080 0.086 0.092 0.120 0.149 0.221 0.301

NC 18 21 24 29 34 38 41 47 53

RETURN AIR CEILING DIFFUSER, 4 WAY - (RCD - 4R) IP - UNITS

f - ceiling diffusers

Documents