f series frequency tacho counting batch meter
TRANSCRIPT
-
8/16/2019 f Series Frequency Tacho Counting Batch Meter
1/1
www.mypinchina.com
MYP N MYP N
www.mypinchina.com
Fseries Frequency,Tacho,Counting,Batch Meter
FH series Inteligent Frequency/Counting/Length/Height/Linespeed Integreted Meter
Fseries Frequency,Tacho,Counting,Batch Meter
FH series Inteligent Frequency/Counting/Length/Height/Linespeed Integreted Meter
FH7 FH8
4-20mA
-
TXD RXD
TXD RXD
80
24V
FeaturesPress button setting,can measuring various frequency,tacho,linespeed,with counting,length function at the same time
INPUT/OUTPUT opical isolation,high anti-interference
2 road input with ADD/subtract function,can match with various encoder.4 digit/ 6 digit LED display,sensor power supply
2 Alarm Output,several output mode selectable.
RS485 communication interface,MODBOS RTU protocol selectable
Mode Illustration
Dimension
Power
Digit Display
Function Select
Blank
Communication
Power Supply
Input Signal
Blank
Blank
FH series couting,batch/counting linespeed integreted Meter
5 digit display
4 digit display
6 digit display
Frequency,Tacho,Linespeed Measuring
Counting,Length
without output
Relay
SCR
without output
Relay
SCR
without communication
Line 1 Pulse Input(Length function active)
Line 2 Pulse Input(Counting function active)
Note
with Encoder
Technical Parameter
Power
Input signal
Counting Speed
Counting Range Display
Ratio Setting Range
Input Inpedance
Realy Output Mode
Analog Output
Insulation Resistance
Insulation Strength
Environment
Auxiliary Power Supply
Weight
Pulse Signal,Square Wave, Sine-Wave
Power Comsuption ≤5VA
(Change automatically according to digit displayed)
(Change automatically according to digit displayed)
(Counting),High/Low Limit Alarm(frequency),Capacity:AC 250V/3A DC 30V/3A
configured by software
between power terminal and extra terminal )
between power terminal and extra terminal( )
Emvironm ent R elative Hum id ity
about
Connection
Dimension
InstallingDimension
Size
Mode
Input Mode A,B,C,D Counting
Input Mode A UP(add)
Input Mode C UP/DOWN(add and subtract
Input Mode B UP/DOWN(add/subtract)
Input Mode D UP/DOWN
Input Counting
Input CountingInput CountingInput CountingInput Counting
Input Counting Control lo r Terminal Controllor Terminal
Counting ValueCounting Value
Counting Value Counting Value
Output Mode Selection
Input Mode Selection
Input Mode
Mode
Mode
Mode
ModeMode
Mode
Mode
Mode
Mode
Mode
Output Mode
Function Illustration
Function Illustration
INA: UPcounting,INB:GATE function,If INB is high level or short connected with +12V,INA Input is not allown
INA:UP counting,INB:Co untdown control function,If INB is high level,INA chang es to DOMN counting
INA:UP counting, INB:DOWN counting
INA Signal lagging dehind INB Signal,DOWN counting active;
INA Signal lagging dehind INB Signal,DOWN counting active;
INA Sig nal advance INB Signal,UP counting active;
INA Sign al advance INB Signal,UP counting active;
INA:UP countiing terminal
INB:DOWN counting terminal
UP count to setting value HI ,
UP count to setting value HI ,
UP count to setting value HI ,
UP count to setting value HI ,
UP count to setting value HI , display value delay some time ,and reset automatically(we call it Automatic Reset)
display value delays until reset handly or extra connection we call it Manual Resetdisplay value reset automatically and count again(we call it Automatic Reset)
display value continue to add,untill manual reset or extra connection
HI and LO act as High limit and Low limit Alarm Output Controllor respectively
HI and LO act as the first and second segment Output Controllor respect ively
2 segment optional parament setting,optional frequency dividing,length parameter setting
one analog current output with various measuring signal selectable(in frequency measuring state)
Code Illustration
INB at high level,INA inpur not allown;
INB at low level,INA at UP counting
INA at high level,INA at DOWN counting
INB at high level.INB at UP counting
rising-edge trigger,counting workable,frequency:0.01~9kHz
(phase difference input,used as Encoder)
(