face recognition device f710
DESCRIPTION
Face recognition embedded solution which can be used for time attendance, access control and user verification.TRANSCRIPT
FACE RECOGNITION SYSTEMF710
Presentation Overview
• Device Overview• Face Recognition Technology• Package Contents• Device Familiarization• Turning the Device ON• Administrator Registration• User Registration• User Verification• User Guide• Management Software• Device Performance• Specifications• Contact Us
Device Overview
Time Attendance
Access Control
User Identification
Time Attendance
Access Control
User Identification
The device can mark attendance time of users
The device can be connected to an electric door lock & configured in a manner that it opens only after a
successful user verification
The device can scan the face of a user and find his identity records
saved in its database.
Face Recognition Technology
• There are two technologies behind face recognition being used today- 2D & 3D technologies. 2D technology uses plane projection of actual faces & is affected by environment light, facial expression etc. 3D technology is more accurate but has the cons of being very expensive, complex algorithms, requiring more storage & slow recognition.
• The technology used in F710 is called ‘Dual Sensor’ which combines the advantages of both 2D & 3D technologies. It uses two special cameras which are just like a person’s eyes. The technology has fast recognition speed & high accuracy. Below given is the pictorial representation of ‘Dual Sensor’ technology.
Package ContentsProduct boxUser guide
Power adaptor Installation CD RFID card
F710 device
Device Familiarization – Front View
Touch keypad
IR lights
TFT color LCD
Cameras
Area for swiping
RFID card
Keypad
Backspace
Menu
Up selection
Down selection
EscapeEnter/OK
Back View
Doorconnection
terminal
SD card inserting
slot
Loud speaker
Back View
Power adaptor portNetwork cable port
Bottom View
USB port
Power Adaptor
To be connected to
the device
To be connected to
AC supply
Adaptor specifications.Input: 110-240V AC 1A 50-60HZ
Output: 12V 3A
RFID Card
The RFID card can be used for user verification
Management Software CD
The management software can be installed on a PC using the installation
CD provided
User Guide
The user guide contains all details regarding the system
Turning the device ON
Connect the power cable to the power adaptor port at the back
side of the device
Connect the other end of the power cable to AC supply
Now the device will turn ON automatically
Administrator Registration• The first step in the operation of the device is the administrator [admin]
registration. Only admin has the option to control the device & manage the records. Up to 5 admins can be registered in the device.
• To start with, after turning the device on, press MENU. Now the following prompt will appear.
Press 1 on the touchpad to set
admin
Press 1 to set the first
admin
• Now the device will start the admin registration process.• Make sure that the device is kept at a distance of 50-80 cm from the face
at the time of registration and verification.• Follow the instructions on the screen to complete the registration.• The system will ask ‘Register as User?’ Press OK if the admin is to be
registered as a user too. Press ESC if that is not required.• After successful registration, the confirmation message will be displayed
on the screen.• For admin verification, press MENU in stand by. A green circle and a
scanning brush will appear on the screen. Keep the face in such a manner that the brush can scan it properly, at the proper distance mentioned above. Once successfully verified, the Functions Menu will appear on the screen.
User Registration• Only admin can register, modify or delete users.• Press MENU for admin verification. After successful verification, Functions
Menu will appear. Now proceed in the following manner.
Press 2 to select user management
Press 1 to select register user
Input user number. It can be in the range
1-99999999
• After successful user registration, a confirmation message will be displayed on the screen.
Input user name. It can be up to 18 characters
long. Press ESC to toggle between small & capital
lettersSelect any one of the four
available verification options
Face: Normal userCard: Temporary userPin and Face & Card
and Face: High security level
User Verification
• The system automatically detects a face when it appears in front of the camera.
• Adjust the face so that a green square is seen blinking on the screen. This denotes that the system is attempting to verify the face. If it doesn’t appear, then adjust the face properly. You may be too far from or too near to the device.
• The device may show messages like ‘Adjust Your Actions’. This can happen if the face is not steady or facial expressions need to be adjusted.
• After successful user verification, voice prompt gives a voice message ‘access granted’.
• If a face is unknown to the system, it gives the message ‘access denied’ via the voice prompt.
User Guide
• The user guide provided along with the system, in printed & word document formats, give all details regarding device configuration, installation, admin/user management, system settings, record management etc.
Device Configuration
Front View Figure
Elevation View Figure
Back View Figure
TFT Color LCD
Display the function menu and user information.
Exit full screen view of this presentation, right click
here & select open document to view the user
guide
Management Software• A management software comes along with the system which can be
installed on a PC using the installation CD provided. It can be used for a variety of functions including staff management, device management, work shift settings, data import/export etc.
The default language of the software is Chinese. Follow these instructions to change it to English.
Open the software
Enter ‘admin’ in both fields
Find a white question mark, click on it to select English as default language
Device Performance
• The device is highly accurate & dependable. Still, keeping in mind the following points will aid in better device performance.
The system doesn’t have an inbuilt battery. So connect it to an uninterrupted power supply.
In cases of uneven light conditions [more light on one side of face] or low light conditions, the system responds correctly. But in no light conditions [total darkness, only IR light from the device is available] the system may reject a valid user at first but on multiple attempts, he will be recognized successfully.
At the time of user registration if a user wears spectacles and if he comes to the system without spectacles later, the system still
successfully recognizes him. But this doesn’t work with sun glasses.
In the system, data is stored in an SD card, which can be directly connected to PC via a card reader to export data
directly PC.
SD card
The system has the facility to connect with a USB storage device. Data including attendance logs, user list etc can be
imported from and exported to USB device in the form of .txt files.
Specifications
Contact Us
• BioEnable Technologies Pvt. Ltd.2nd Floor, The Avenue, Pune-Solapur Road, Hadapsar,landmark: Opp. Mega Center, Pune 411028 MH, India
• Toll free: 1800-209-2131 (only from India)• International Sales: +91-9326170554 or +91-9373336478• Others call : +91-20- 26810214• Fax: +91-20-30225587• email: [email protected] (Sales Worldwide)
[email protected] (Support Worldwide)[email protected] (Accounts Worldwide)