false ceilings industry building profiles and …€¦ · metalscreen® metalscreen® s.p.a. - via...

METALSCREEN®

1METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it

All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings

41030 BOMPORTO MOdena- ITaly eU Via A. Moro, 38Tel. +39 059/8170611Fax +39 059/8170633Fax +39 059/8170632 [email protected]

METAL FALSE CEILINGS INDUSTRIES

FalSe CeIlInGS IndUSTRyBUIldInG PROFIleS and SUSPenSIOn SySTeMS FaCTORy

2

METALSCREEN®

METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it


The quality starts from the best raw materials

METALSCREEN®



eUROPean TeSTInG CeRTIFICaTIOn ORIGInal EN 13964:2004 - EN 14195:2005

Quality Management System Operated UNI EN ISO 9001:2000

…A thought:It Is tIme to replace your old glass mIneral fIbre ceIlIng panellIng, wIth Its health rIsks and dIrt, Its panels that you can’t wash and

that have become a breedIng ground for all kInds of bacterIa, and Its warped and

ugly appearance. leave the exIstIng bearIng structure and sImply Insert new boxer panels, whIch are supported by your exIstIng grId. the whole room wIll take on a new lIght, you wIll

be helpIng everyone In the workplace.

ALUMINIUM FALSE CEILINGSADVANTAGES FOR EVERYBODY

Weight

The lightness of aluminium (its weight is 60% of steel) allows fast and easy installations. Easy to place and to stock.

Fire reaction class “0” - Euroclass A1Aluminium does not react to fire or produce dangerous

gaseous emissions for steel and for aluminium. Class “O”. D.M. dt 26.06.84 (S.O.G.U. n° 234 dt 25.08.84)

D.M. dt 14.01.85 (G.U. n° 16 dt 19.01.85)Fire reaction means: life.

AestheticPolyester painting allows a wide range of colours; different

solutions, such as strips and panels, can be provided.

Colour RangeMetalscreen products are available in a broad range of colours. Corrosion resistant, dirt repellent, extremely durable and avoids

the products yellowing.

WashableAluminium ceilings can be easily washed assuring the complete

removal of dust and bacteria. Germproof - Aseptic.

Maintenance costCeilings are produced in modules so that only the damaged parts

can be substituted. Easy to Cut - Easy to mould - Long lasting.

Acoustic absorbtionAluminium can be coupled with different materials in order

to obtain an excellent acoustic absorbtion. Stop fiberglass - Stop mineral fiber - Stop gypsum board -

Stop pollutions on the air.

Corrosion resistanceHas excellent corrosion resistance provided by the paints

and the specific chemical properties of aluminium. Still life warrantee - Corrosion proof.

Official test certification nr 7/DC/RUB/09 of 11/06/2009.

HumidityAluminium ceilings do not absorb nor produce humidity,

allowing you to live, work, and study in healthy environment. Healty - Don’t release pollution into the air.

RecyclingAluminium is 100% recyclabe. Recycled aluminium

maintains the same mechanical properties as primary aluminium. Effort the future world.

Chrome-freeThe production process is environmental friendly and uses

totally Chrome-free pretreatment. No asbestos - No mineral fibers.

Freight chargesReduced cost of transport - Light weight less incidence of freight

charges respect any other kind of false ceilings in the market.

THE ALUMINIUM FALSE CEILINGIT IS NOT DANGEROUS FOR YOUR HEALTH

al• •

ALUM

INIUM IS RECYLABE

ALUMINIUM IS RECYLAB

E

NO ASBESTOS

PROVEN APPLICATIONS:•ADMINISTRATIVEOFFICESANDINDUSTRIALBUILDINGS•BANKS,SALESOFFICES,SHOWROOMS,DEPARTMENT

STORES, CHURCHES, MOSQUES, TEMPLES, RESTAURANTS AND COFFE SHOPS

•SCHOOLS,HOSPITALS,AIRPORTS,HOTELS,FOODSTORES

•THEALUMINIUMCEILINGISNOTDANGEROUSFORYOUR HEALTH

•NOPOLLUTIONONTHEAIR

4

METALSCREEN®





P

AN

EL

SSUSPENDED FALSE CEILINGSALUMINIUM AND METAL PANELS

FALSE CEILINGS INDUSTRYBUILDING PROFILES ANDSUSPENSION SYSTEMS FACTORY

66METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633

e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings

CLIP-IN

CEILINGSPANELSmm.600x600WITHSHADOWJOINTGAPCLIP-INCONCEALEDSYSTEM

INSTALLATION GUIDELINE:

The panels are suspended from a spring tee renforced profile and simply clipped into place. The spring tee renforced profiles must keep a distance of approximately 600 mm. between. The suspension is created by a collection of hangers which, by means of adjustable clips. The different profiles manufactured for this model. Allow the consultant to choose from a variety of surrounding finishes. Each single panel can easily be removed, making inspections possible and full access to the ceiling cavity without it being necessary to remove the entire ceiling system already installed.

WASHABLE • DUSTPROOF • RESISTANT TO DAMPNESS AND ATMOSPHERIC ELEMENTS • CORROSIONPROOF

SCRATCH PROOF

SIMPLE SYSTEM CONCEALED PROFILES

SPRING TEE RUNNERTYPE 08

METAL BRACKETTYPE 09/B

PANEL

AVAILABLE ALSO IN PREPAINTED

STEEL THICKNESS MM 0,5

THECNICAL SPECIFICATIONS: “ ” CLIP-INFalse suspended ceilings system composed of: prepainted aluminium corrosionproof and washable type METALSCREEN “ ” clip-in concealed with shadow joint gap all around the panel, mm. 600x600 thickness mm. 0,5–0,6-0,7, microperforated diagonal holes Ø mm. 2 – Ø mm. 3 total surface, with mm. 25 plain renforced surface all around the border’s panel or central surface mm. 400x400 with mm. 100 plain renforced surface all around the border’s panel (the colour, the thickness and the perforations will be choose by the consultants).Its complete of acoustic “TNT” textile non woven black fabric thermal applied on the back of each panel.The “ ” clip-in panels, must be installed on “DOUBLE CONCEALED SUSPENSION SYSTEM” composed of: primary supporting runner type U2 hot dipped galvanized steel thickness mm. 0,6 across with the galvanized hot dipped spring tee renforced runner type 08 to clip the “ ” panel with a simple soft pressure and metal union snaps type 35 to obtain a perfect shadow joint gap.The “DOUBLE CONCEALED SUSPENSION SYSTEM” its composed without use other kind of parts without screws, bracket or make holes.It is only suspended with hanging rigid wire Ø mm. 4 with metal adjustment double snap type 23/D, perimetrical wall angles “L” section mm. 24x24 with connector joint prepainted aluminium of same colour of the “ ” panels.AVAILABLE ALSO IN PREPAINTED THERMOSETTING STEEL THICKNESS mm. 0,5

CLIP-IN

CEILINGSPANELSMM600x600WITHSHADOWJOINTGAPCLIP-INCONCEALEDSYSTEM

NUOVONEW

PLAIN

PERFORATEDTOTAL SURFACEHoles Ø mm. 3 - 10%Plain border mm. 25

PERFORATED CENTRAL SURFACE(mm. 400x400)Holes Ø mm. 3 - 5%Plain border mm. 100

MICRO- PERFORATED CENTRAL SURFACE(mm. 400x400)Holes Ø mm. 2 - 10%Plain border mm. 100

MICRO- PERFORATEDTOTAL SURFACEHoles Ø mm. 2 - 20%Plain border mm. 25

SHADOW JOINT GAP SHADOW JOINT GAP



CLIP-IN

TECHNICAL INSTRUCTIONS TO INSTALL THE CONCEALED SYSTEM

TYPE 08

TYPE 09/B

TYPE 08SPRING TEE RUNNER STEEL GALVANIZED LENGHT MM 4000 RENFORCED TORSIONPROOF

TYPE G8JOINT COUPLING FOR SPRING TEE TYPE 08

TYPE U2 MAIN SUPPORTING RUNNER

TYPE 35 UNION ROYALMETAL SNAP

TYPE “08”CONCEALED SPRING TEE

RUNNER GALVANIZED STEEL LENGHT MM 4000

TYPE “U2”PRIMARY SUSPENSION

CARRIER STEEL GALVANIZED LENGHT MM 4000

• PERFECT STABILITY AND PLANARITY OF THE FALSE CEILINGS SYSTEM - SAFETY

• TORSION PROOF - HEAVY WEIGHTS• SUSPENSION HANGERS AT mm. 1200

INSTALLATION “DOUBLE SYSTEM” FOR PANELS CONCEALED CLIP-IN

DETAILS OF THE SHADOW JOINT GAP WITH THE CLIP SYSTEM AROUND THE PANEL

Torsion proofrenforced

NUOVO

NEW

NUOVO

NEW

ART. 09/Bmetal bracket adjustement runner for type 08

NUOVONEW

NUOVONEW

SHADOW JOINT GAP

PLAIN BORDERmm. 100

P

AN

EL

S



“TNT” ACOUSTIC SOUND PROOFINGNONVOWENFIBRE FABRIC”TNT” is a new microfibre with non-vitreous fabric warping which METALSCREEN applies to the back of every single panel and strip in the ceiling panelling system using a computerised apparatus with a thermal monitoring function.“TNT” has extremely powerful noise absorption properties, does not release noxioius fibres into the air and does not alter or decompose over time.“TNT” is supplied already affixed to the panel, preventing additional installation, carriage and storage costs which usually apply to the supply of insulating materials.METALSCREEN ceiling panelling with “TNT” and its thermal adhesive backing guarantee the presence of an insulating material even after inspections, maintenance and repositioning of each individual panel in the ceiling panelling.

“TNT” ACOUSTICAL NON WOVEN TEXTILE

CLIP-INNUOVONEW

SHADOW JOINT GAP



CEILINGSPANELSmm.600x600WITHSHADOWJOINTGAPCLIP-INCONCEALEDSYSTEM

CLIP-INNUOVONEW

P

AN

EL

S



Q6060® CLIP-IN

CONCEALED CLIP-IN PANELS PANELS Q6060

INSTALLATION INSTRUCTIONS:

The panels are suspended from a spring tee renforced profile and simply clipped into place. The spring tee renforced profiles must keep a distance of approximately 600 mm. between. The suspension is created by a collection of hangers which, by means of adjustable clips. The different profiles manufactured for this model. Allow the con-sultant to choose from a variety of surrounding finishes. Each single panel can easily be removed, making inspections possible and full access to the ceiling cavity without it being necessary to remove the entire ceiling system already installed.

WASHABLE • DUST-PROOF • RESISTANT TO DAMPNESS AND ATMOSPHERIC ELEMENTS • CORROSION PROOF

SCRATCH PROOF

SIMPLESYSTEM CONCEALED PROFILES

SPRING TEE RUNNER TYPE 08

METAL BRACKET TYPE 09/B

PANEL


STEEL THICKNESS MM. 0,5

Q6060® CLIP-IN

CONCEALED CLIP-IN PANELS PANELS Q6060

BEVELLED CLOSED JOINT

TECHNICAL SPECIFICATION: “Q6060” CLIP-INFalse suspended ceilings system composed of: prepainted aluminium corrosionproof and washable type METALSCREEN “Q6060” clip-in concealed with bevelled closed joints, mm. 600x600 thickness mm. 0,5–0,6-0,7, microperforated diagonal holes Ø mm. 2 – Ø mm. 3 total surface, with mm. 25 plain renforced surface all around the border’s panel or central surface mm. 400x400 with mm. 100 plain renforced surface all around the border’s panel (the colour, the thickness and the perforations will be choose by the consultants).Its complete of acoustic “TNT” textile non woven black fabric thermal applied on the back of each panel.The “Q6060” clip-in panels, must be installed on “DOUBLE CONCEALED SUSPENSION SYSTEM” composed of: primary supporting runner type U2 hot dipped galvanized steel thickness mm. 0,6 across with the galvanized hot dipped spring tee renforced runner type 08 to clip the “Q6060” panel with a simple soft pressure and metal union snaps type 35 to obtain a perfect shadow joint gap.The “DOUBLE CONCEALED SUSPENSION SYSTEM” its composed without use other kind of parts without screws, bracket or make holes.It is only suspended with hanging rigid wire Ø mm. 4 with metal adjustment double snap type 23/D, perimetrical wall angles “L” section mm. 24x24 with connector joint prepainted aluminium of same colour of the “Q6060” panels.AVAILABLE ALSO IN PREPAINTED THERMOSETTING STEEL THICKNESS mm. 0,5

PLAIN







Q6060® CLIP-IN

TECHNICAL INSTRUCTIONS TO INSTALL THE CONCEALED SYSTEM

TYPE 08

TYPE 09/B

TYPE 08SPRING TEE RUNNER STEEL GALVANIZED LENGHT MM 4000 RENFORCED TORSIONPROOF

TYPE U2 MAIN SUPPORTING RUNNER

TYPE 35UNION ROYAL METAL SNAP

TYPE “08”CONCEALED SPRING TEE

RUNNER GALVANIZED STEEL LENGHT mm. 4000

TYPE “U2”PRIMARY SUSPENSION

CARRIER STEEL GALVANIZED LENGHT mm. 4000

• PERFECT STABILITY AND PLANARITY OF THE FALSE CEILINGS SYSTEM - SAFETY

• TORSION PROOF - HEAVY WEIGHTS• QUICK INSTALLATION• SUSPENSION HANGERS AT mm. 1200

INSTALLATION “DOUBLE SYSTEM” FOR PANELS Q6060 CONCEALED CLIP-IN

BEVELLED EDGESTorsion proofrenforced

NUOVO

NEW

NUOVO

NEW

TYPE 09/Badjustement runner metal bracket

NUOVONEW

TYPE G8JOINT COUPLING FOR SPRING TEE TYPE 08

P

AN

EL

S

12

METALSCREEN®



ACCESSORIES FOR PANELS

Q6060® -

CONCEALED CLIP-IN “SIMPLE SYSTEM”

TYPE 09/Badjustement runner metal bracket


TYPE G8METAL JOINT COUPLING

FOR SPRING TEE TYPE 08

TYPE 08SPRING TEE RUNNER RENFORCED TORSIONPROOF STEEL

GALVANIZED LENGTH MM. 4000

ACCESSORIES FOR PANELS

Q6060® -

CONCEALED CLIP-IN “DOUBLE SYSTEM”


TYPE U2MAIN SUPPORTING RUNNER LENGTH MM. 4000

TYPE G8METAL JOINT

COUPLING FOR SPRING TEE

TYPE 08

TYPE 08SPRING TEE RUNNER RENFORCED TORSIONPROOF STEEL GALVANIZED LENGTH MM. 4000



BOXER® VT-24 DEEP LAY-IN PANELS DEEP mm. 35 ON SUSPENSION T-BAR mm. 24 GRID

TOTAL FULL INSPECTION

METALSCREEN®

NUOVONEWNUOVO

NEW



BOXER® LAY-IN

BOXER®

VT-9 TEGULAR“METALSCREEN BOXER VT-9 TEGULAR” 0,5-0,6-0,7 mm. thick, prepainted aluminium ceiling recessed panels dimension mm. 595x595xH9 with oblique bevelled edges and height: 9 mm. (the colour and the exact thickness will be chosen by the consultants).The “BOXER VT-9 TEGULAR” panel individually demountable and the panels will be mounted lay-in visible “T” bar grid structure type “TWIN LOCK”. 600x600 mm. modular structure is composed of hot dipped galvanized steel “T” bar profiles with prepainted aluminium corrosionproof capping mm. 24xH38 for each component inclusive the cross tees.The perimetrical finishes will be made using a prepainted galvanized steel frames type RA.24x24 “L” section profile 24x24 mm. To increase soundproofing and noise control, the “BOXER VT-9 TEGULAR” panels will be supplied with Ø 3 mm. perforations or, alternatively, Ø 2 mm. micro-perforation with total or central surface (as required by the site management).Each panel must be supplied with acoustic “TNT” non woven textile soundproofing fabric thermal applied on the back of each panel.

BOXER®

VT-15 MICROLOOK DESIGN“METALSCREEN BOXER VT-15 MICROLOOK” 0,5-0,6-0,7 mm. thick, prepainted aluminium ceiling recessed panels dimension mm. 595x595xH9 with oblique bevelled edges and height: 9 mm. (the colour and the exact thickness will be chosen by the consultants).The “BOXER VT-9 MICROLOOK” panel individually demountable and the panels will be mounted lay-in visible “T” bar grid structure type “TWIN LOCK”. 600x600 mm. modular structure is composed of hot dipped galvanized steel “T” bar profiles with prepainted aluminium corrosionproof capping mm. 15xH38 for each component inclusive the cross tees.The perimetrical finishes will be made using a prepainted galvanized steel frames type RA.24x24 “L” section profile 24x24 mm. To increase soundproofing and noise control, the “BOXER VT-15 MICROLOOK” panels will be supplied with Ø 3 mm perforations or, alternatively, Ø 2 mm. micro-perforation with total or central surface (as required by the site management).Each panel must be supplied with acoustic “TNT” non woven textile soundproofing fabric thermal applied on the back of each panel.

BOXER®

VT-24 DEEP“METALSCREEN BOXER VT-24 DEEP” 0,5-0,6-0,7 mm. thick, prepainted aluminium ceiling recessed panels dimension mm. 595x595xH35 with oblique edges and height: 35 mm. (the colour and the exact thickness will be chosen by the site consultants).The “BOXER VT-24 DEEP” panel individually demountable and the panels will be mounted lay-in visible “T” bar grid structure type “TWIN LOCK”. 600x600 mm. modular structure is composed of hot dipped galvanized steel “T” bar profiles with prepainted aluminium corrosionproof capping mm. 24xH38 for each component inclusive the cross tees.The perimetrical finishes will be made using a prepainted galvanized steel frames type RA.24x24 “L” section profile 24x24 mm. To increase soundproofing and noise control, the “BOXER VT-24 DEEP” panels will be supplied with Ø 3 mm. perforations or, alternatively, Ø 2 mm. micro-perforation with total or central surface (as required by the site management).Each panel must be supplied with acoustic “TNT” non woven textile soundproofing fabric thermal applied on the back of each panel.

BOXER®

SK BOARD PLAN“METALSCREEN BOXER SK BOARD” 0,5-0,6-0,7 mm. thick, prepainted aluminium ceiling flat panels dimension mm. 595x595 with oblique bevelled edges (the colour and the exact thickness will be chosen by the consultants).The “BOXER SK BOARD” panel individually demountable and the panels will be mounted lay-in visible “T” bar grid structure type “TWIN LOCK”. 600x600 mm. modular structure is composed of hot dipped galvanized steel “T” bar profiles with prepainted aluminium corrosionproof capping mm. 24xH38 for each component inclusive the cross tees.The perimetrical finishes will be made using a prepainted galvanized steel frames type RA.24x24 “L” section profile 24x24 mm. To increase soundproofing and noise control, the “BOXER SK BOARD” panels will be supplied with Ø 3 mm. perforations or, alternatively, Ø 2 mm. micro-perforation with total or central surface (as required by the site management).Each panel must be supplied with acoustic “TNT” non woven textile soundproofing fabric thermal applied on the back of each panel.

BOXER®

FLUSH-VT FLAT“METALSCREEN BOXER FLUSH-VT” 0,5-0,6-0,7 mm. thick, prepainted aluminium ceiling flat panels dimension mm. 595x595 with oblique bevelled edges (the colour and the exact thickness will be chosen by the consultants).The “BOXER FLUSH-VT” panel individually demountable and the panels will be mounted lay-in visible “T” bar grid structure type “TWIN LOCK”. 600x600 mm. modular structure is composed of hot dipped galvanized steel “T” bar profiles with prepainted aluminium corrosionproof capping mm. 24xH38 for each component inclusive the cross tees.The perimetrical finishes will be made using a prepainted galvanized steel frames type RA.24x24 “L” section profile 24x24 mm. To increase soundproofing and noise control, the “BOXER FLUSH-VT” panels will be supplied with Ø 3 mm. perforations or, alternatively, Ø 2 mm. micro-perforation with total or central surface (as required by the site management).Each panel must be supplied with acoustic “TNT” non woven textile soundproofing fabric thermal applied on the back of each panel.

TECHNICAL SPECIFICATION


STEEL THICKNESS MM. 0,5

NUOVONEW

NUOVONEW

PLAIN







BOXER®

VT-9 TEGULAR

BOXER®

VT-15 MICROLOOK DESIGN

BOXER®

VT-24 DEEP

BOXER®

SK BOARD PLAN

CEILINGS PANELS EXPOSED LAY-IN SYSTEM

PACKING: HARDCARTON BOXESDIMENSIONS: mm. 600x600xH100 CONTAIN: nr. 25 pcs. = 9 M2 WEIGHT: kg. 13 VOLUME: M3 0,06CONTAINER CAPACITY: 1x20 FT = approx M2 4500 -1x40 FT = approx M2 9000

PACKING: HARDCARTON BOXESDIMENSIONS: mm. 600x600xH100 CONTAIN: nr. 25 pcs. = 9 M2 WEIGHT: kg. 13 VOLUME: M3 0,06CONTAINER CAPACITY: 1x20 FT = approx. M2 4500 -1x40 FT = approx M2 9000

PACKING: HARDCARTON BOXESDIMENSIONS: mm. 600x600xH100 CONTAIN: nr. 25 pcs. = 9 M2 WEIGHT: kg. 13 VOLUME: M3 0,06CONTAINER CAPACITY: 1x20 FT = approx. M2 4500 -1x40 FT = approx M2 9000

TWIN LOCK ®

TWIN LOCK ®

mm. 595

mm. 595

mm. 595

mm. 595

BOXER®

FLUSH-VT FLAT

mm. 595

45

• FAST AND EASY INSTALLATION • INEXPENSIVE AND FUNCTIONAL • QUICK ACCESS FOR DISMOUNTING, SCRATCHPROOF • SPECIAL PACKING REDUCES FREIGHT CHARGES • LIFE TIME, MAINTENANCE FREE, GERMOPROOF • WASHABLE, RESISTANT TO DAMPNESS AND

ATMOSPHERIC ELEMENTS, CORROSIONPROOF • DUST PROOF • NO RELEASE DANGEROUS MICROFIBERS INTO THE

ENVIRONMENT

NUOVO

NEW

BOXER® LAY-IN

TWIN LOCK ®

TWIN LOCK ®



“TNT”ACOUSTICNONWOVENTEXTILE

P

AN

EL

S

METAL SNAPTYPE BCU SPRING

FOR PANEL FASTENING

TWIN LOCK ®



TRIPLEX ®

ALUMINIUM DECORATIVES FALSE CEILINGS TECHNICAL SPECIFICATIONS

TRIPLEX 2 - Q6060 “CLIP-IN”CONCEALED SYSTEM

Decorative false ceiling METALSCREEN “TRIPLEX 2” panels mm. 600x600 with open windows mm. 100x45 painted aluminium mm. 0,6-0,7 thickness.The panels “TRIPLEX 2” can be installed on concealed clip-in suspension systemWallanglesperimetricalframesaluminiumsamecolouraspanel.The panels can be perforated Ø mm. 3 diameter with acoustic nonwoven black tissue thermal applied on the back of each panel.

TRIPLEX 2 - BOXER “LAY-IN”EXPOSED SYSTEM

Decorative false ceiling METALSCREEN “TRIPLEX 2” panels mm. 600x600 with open windows mm. 100x45 painted aluminium mm. 0,6-0,7 thickness.The panels “TRIPLEX 2” can be installed on concealed clip-in suspension system or exposed lay-in “t-BAR” system “Twin Lock” mm. 24xH38 with aluminium corrosion proof capping of the same colour as the panels.Wallanglesperimetricalframesaluminiumsamecolouraspanels.The panels can be perforated Ø mm. 3 diameter with acoustic nonwoven black tissue thermal applied on the back of each panel.

TRIPLEX 1 - TRIPLEX 2EXPOSED SYSTEM LAY-IN

SK BOARD

VT-9 TEGULAR VT-15 MICROLOOK

NUOVO

NEW

mm. 24 mm. 24

mm. 24 mm. 15

FLUSH-VT



TRIPLEX 1 - “CLIP-IN” CONCEALED SYSTEM RECTANGULAR SLOT PERFORATION

TRIPLEX 1 - “LAY-IN” EXPOSED SYSTEM RECTANGULAR SLOT PERFORATION

NUOVO

NEWTRIPLEX ®

SUSPENSION SYSTEMS

mm. 595TWIN LOCK®

3838

24

9 mm.

15

TRIPLEX 1 - Q6060 CLIP-INCONCEALED SYSTEM

Decorative false ceiling type METALSCREEN “TRIPLEX 1” panels mm. 600x600 with rectangular open slot mm. 15x110 painted aluminium mm. 05-06-07 thickness.The panels “TRIPLEX 1” can be installed on concealed clip-in suspension system.Wallanglesperimetricalframesaluminiumsamecolouraspanels.The panels can be perforated ∅ mm. 3 diameter with acoustic nonwoven black tissue thermal applied on the back of each panel.

TRIPLEX 1 - BOXER “LAY-IN”EXPOSED SYSTEM

Decorative false ceiling type METALSCREEN “TRIPLEX 1” panels mm. 600x600 with rectangular open slit mm. 15x110 painted aluminium mm. 0,5-0,6-0,7 thickness.The panels “TRIPLEX 1” can be installed on exposed lay-in “T Bar” system “Twin Lock” mm. 24xH38 with aluminium corrosion proof capping of the same colour as the panels.Wallanglesperimetricalframesaluminiumsamecolouraspanels.The panels can be perforated ∅ mm. 3 diameter with acoustic nonwoven black tissue thermal applied on the back of each panel.

TECHNICAL SPECIFICATIONS

ALUMINIUM DECORATIVES FALSE CEILINGS

600 600 600

SPRING TEE RUNNERCONCEALED ITEM 08

ADJUSTMENTRUNNER CLIPS ACCESSORYITEM 09/B

1

2

P

AN

EL

S



O

PE

N C

EL

L C

EIL

ING

S SUSPENDED FALSE CEILINGSALUMINIUM CORROSION PROOFOPEN CELL CEILINGS SYSTEMS




“TRADIZIONALE”

ALUMINIUM OPEN CELL CEILINGS

“TRADIZIONALE”

ALUMINIUM OPEN CELL CEILINGS

ALUMINIUM OPEN CELL CEILINGS BASE mm. 15

ALUMINIUM OPEN CELL CEILINGS BASE mm. 10

ALUMINIUM OPEN CELL CEILINGS SECTION BLADE “U” BASE mm. 15 LAY IN WITHOUT DIFFERENCES - TOTAL FULL INSPECTION

METALSCREEN®



METALSCREEN®

METALSCREEN FACTORY is the lead-ing Italian manufacturer of various models of aluminium open cell sus-pended ceilings systems.kindly contact us for all your require-ment and will answer to you, our best competitive prices.

TRIPLEX/2 COKI-U “TRADIZIONALE” RECTANGULAR

“COKI-B15”

COKI-U “TRADIZIONALE”

COKI-U “APPOGGIO”



INSTALLATION GUIDELINES “TRADIZIONALE”

Metal double snap 23/D

R 1800 main runner

R 1200 cross profile

R 600 cross profile

Panel mm. 600x600R 1800 main runner

CouplingGK

R 600cross profile

Rigid steel hanger type 100

Panel mm. 600x600assembled

MESH DIMENSION “TRADIZIONALE”

mm.10

mm.40

mm.10

mm.50

CouplingGKThe universal composition of “U” shaped blades base mm. 10 makes the “TRADIZIONALE” the most utilized open cell ceiling system of the world. It is composed by aluminium profiles that assembled composed the open cell ceiling:Main runner type R 1800 mm.Cross profile type R 1200 mm.Cross profile type R 600 mm.Blade type “A” (male) mm. 600Blade type “B” (female) mm. 600

Coupling for R 1800 type cavaliereGK

On mesh cell dimension mm. 50x50 and

mm.60x60 not necessary the cross

profiles type R 1200 mm.

“ ”

Blade “A”“MALE”

Blade “B”“FEMALE”

Blade type A (male) assembled whitblade type B (female) to obtain a panel mm. 600x600 to install on the grid system of the “TRADIZIONALE”

blades section“u”

“TRADIZIONALE”

base base

TECHNICAL SPECIFICATION “TRADIZIONALE”

Open cell ceilings concealed system type METALSCREEN “TRADIZIONALE” prepainted aluminium corrosionproof incombustible class “0” - Euroclass fire reaction A1. (colour and mesh cells dimension choosed by the consultant).The open cell ceilings system is composed by U shaped profiles base width mm. 10 and height mm. 40 or mm. 50 (the height choosed by the consultant).Combine all the required components made of aluminium of the same colour it will obtained a regular open cell ceilings without any joints or visual interruption.To obtain better soundproofing, the “U” shaped blades con be microperforated diameter Ø mm. 2 with acoustic “TNT” non woven thermal applied on the back.

O

PE

N C

EL

L C

EIL

ING

S

MESH CELL SIZE mm.

50x5060x6075x7586x86

100x100120x120150x150200x200

50x10060x12075x150100x200



Open cell ceilings lay-in system type METALSCREEN “COKI-B15” prepainted aluminium corrosionproof incombustible class “0” - Euroclass fire reaction A1. (colour and mesh cells dimension choosed by the consultant).The open cell “COKI-B15” must have “U” shaped section width mm. 15xH38,5 to became a panel mm. 600x600 complete of the lateral edge cover profile in aluminium same colour as the open cell panel.It will be installed lay-in on exposed T bar system “TWIN LOCK” mm. 600x600xH38 with the base mm. 15 of the same colour of the cell ceilings to abtain the perfect aesthetical result without any joint or visual interruption.Each panel must be easily removable for inspections.The peculiarity and particularly is to obtain a lay-in open cell ceiling without differences between the panels and the T bar system that must be of the same module width mm. 15.To obtain better soundproofing, the “U” shaped blades con be microperforated diameter Ø mm. 2 with acoustic “TNT” non woven sticked on the back.

ALUMINIUM OPEN CELL CEILING SECTION BLADE “U” BASE MM. 15

METALSCREEN produces a wide range of aluminium grids for false ceilings, with various sizes of cell, section shapes and type of finish.Offers designers and users a host of possibilities of use in line with the criteria of integrated architecture.The false ceilings system is principally used for shielding technological plants, for lighting schemes and to unify more uniform particular spaces with unusual shapes and uneven heights.The practical and aesthetic benefits offered by these solutions are thousands: light and air are evenly distributed while no part of the lighting or the structure remain visible thus permitting the overall use of the space above for other purposes. A harmonizing effect may be created between the various compositional structures in the setting. Thereby imparting an uniform, harmonious atmosphere. The lightness of the materials and the possibility of using small panels set along side each other that do not reveal the load- bearing structure, enable easy, practical maintenance of any located in the space above the false ceiling.The modular nature of the components, the simplification of accessories, the rationalisation of the installation systems, the material itself aluminium, make open cell ceilings an extremely simple and inexpensive system of top quality.

BASE MATERIALS SPECIFICATIONOpen cell ceilings are made of pre-painted aluminium. Thanks to the quality of base materials used, which are produced according to norm EN, ASTM and in compliance with ECCA (European Coil Coating Association), the false ceilings feature either the high ease of installation and the reaction fire Class 0 (un-combustible). Euroclass A1.Generally, the aluminium nails are prepainted: a polyester paint on top side, to achieve decorative purpose in a nominal thickness of 20 microns, a protective paint on back side.The nature of these products allows for use of open cell ceilings in external applications also.

ALUMINIUM AS THE SOLUTIONS OF THE FUTURE FOR A BETTER WORLDOpen cell ceiling systems are made of aluminium washable, corrosionproof, dustproof, longlasting life.The reason of this choice is because aluminium offers many advantages to designers and installers:Light weight: aluminium weight (one third of the same volume of steel) makes very easy the transport, the mounting and demouting of ceiling, saving the relative costs;Long-lasting and resistance: being naturally protected by a thin film of oxide highly thick and adherent (alumina Al2O3), it results resistant to air and weathering corrosion. It means that without special surface

TECHNICAL SPECIFICATION LAY-IN SYSTEM ON “T” 15xH38

38

15

TWIN LOCK ®

MESH DIMENSIONS

38

15

LATERAL EDGE COVER PROFILE

NUOVONEW

TOTAL FULL INSPECTION-REMOVABLES

15

38,5

base

MESH CELL SIZES mm.

50x5060x6075x7586x86

100x100120x120150x150200x200

protection, almost all the aluminium alloys do not deteriorate in time, are extremely durable, no requiring any maintenance;Versatility: the range in terms of chemicals composition and finishes is so wide to meet every functional or aesthetic requirements;Aesthetic: it is surely one of the most beautiful metal, thanks to its natural colour, its light weight, as confirmed by the wide application of this material in architecture, interior and industrial design. Aluminium is, for itself nature, expression of innovation and design.Fire reaction: as for tire reaction, it is deemed to be Class 0. It means aluminium does not generate toxic net hazardous products. Besides, in case of fire, the use of open cell ceiling makes large quantities of smoke can be extracted allowing a better visibility and safe way.Eco-compatibility: aluminium is well-known as the “green” metal, actually it is recycled by 70% and its cost in terms of energy is of one twentieth that of the first melting. This high intrinsic value of aluminium add value to such products ad false ceilings, which make use of this.

Lateral edge cover profile

TWIN LOCK ® mm. 15xH38



38

1515

38,5

LATERAL EDGE COVER PROFILE



COKI-B15 the aluminium open cell ceilings inspired in the class wooden grid, made up of “U” shaped profiles with a width of 15 and height of 40:Specially designed to fit into standard 15 or 24 mm wide t-grids, they provide a trackless appearance of the ceilings.COKI-B15 are high quality products for easiest placement and removal of the panels.

FEATURESCOKI B-15 feature 600x600 mm. modular panels, made up of “U” shaped profiles with 15 mm. base, wich suitably cou-pled form a square cell, to be inserted in a frame. COKI B-15 blades are made by benging system, which gives: the accuracy of profiles, more square edges and blades perfectly straight.

SUPPLY FORMCOKI B-15 are usually supplied unassembled. It allows for easier packages and more economic transports. Upon request, the panels can be also supplied assembled, ready to be installed.

FIRE REACTIONOpen cell ceilings are classified incombustible in compliance with intenational standars. Euroclass A1 - “0” class.

INSTALLATIONThe COKI B-15 are installe in the suspension grids formed by T-profiles, 15 or 24 mm wide, 3600, 1200 and 600 mm. lenght.Whenthepanelislaidintothesuspensiongrid,thestructure results full inyegrated in the cell ceiling.The modular panels 600x600 mm. are easily individually laid into and taken out of the standard T grid, by lifting them upwards for simple access to the plenum.

TWIN LOCK ® mm. 15xH38

base

COKI B-15 particularly suggested to shield above the ceilings:

•Smokeandgassignaldevices•Loudspeakersformusicorinformations•Extinguishsprinklersfiresafety•Getinsignalbellalarm•Safetyandcontrolvideocameras

SAFETY SECURITY SAFETY SECURITY

ALUMINIUM OPEN CELL CEILING SECTION BLADE “U” BASE MM. 15

NUOVO

NEW

O

PE

N C

EL

L C

EIL

ING

S



Open cell ceiling lay-in system type METALSCREEN “APPOGGIO T24” prepainted aluminium corrosionproof incombustible class “0” - Euroclass fire reaction A1 (colour and mesh cells dimension choosed by the consultant). The open cell ceiling panels must have “U” shaped section base width mm. 10 or mm. 15 and height mm. 40 (the base width dimension choosed by the consultant).The open cell panels mm. 600x600 will be installed lay-in on exposed T bar grid 600x600xH38 system “TWIN LOCK” mm. 24xH38 of the same colour as the open cell ceiling.Each panel must be easily removable for inspection.

mm.10

mm.40

mm.10

mm.50

“APPOGGIO” T 24 MM.

“APPOGGIO” base mm. 10lay-in mm. 24 x H38

TWIN LOCK ®

38

24

MESH DIMENSION “APPOGGIO T 24”

TECHNICAL SPECIFICATIONS:

Total full inspection-each panel removable - Fast installation - Quick maintenance

INSTALLATION GUIDELINES “APPOGGIO” T 24” BASE MM. 10 e MM. 15

base base

mm.10

mm.40

mm.10

mm.50

38

base

15

38,5

“APPOGGIO” base mm. 15lay-in mm. 24 x H38

TWIN LOCK ®

NUOVO

NEW24

The panels with mm. 15 base give back the best aestetic result from the ceiling

The modular panels 600x600 mm. are easily individually laid and taken out of the standard T grid, by lifting them upwards for simple access to the plenum.

MESH CELL SIZE mm.

50x5060x6075x7586x86

100x100120x120150x150200x200

50x10060x12075x150

100x200



OPEN CELL CEILINGS SYSTEMS

Blade A:“MALE”

Blade B:“FEMALE”

Blade type A (male) assembled whitblade type B (female) to obtain a panel mm. 595x595 lay-in on the T24 bar exposed system:

“APPOGGIO” T 24 mm. BASE mm. 10 mm. 15 LAY-IN mm. 24xH38

Panel mm. 595x595assembled

“APPOGGIO” T24

38

24

TWIN LOCK ®

O

PE

N C

EL

L C

EIL

ING

S



L

INE

AR

ST

RIP

ES SUSPENDED FALSE CEILINGS

ALUMINIUM LINEAR STRIPESCORROSION PROOF FOR INTERIOR

AND EXTERIOR APPLICATIONS


METALSCREEN®



L

INE

AR

ST

RIP

ES



Type LT/100Tipe LT/150CLOSED GAP

Type LC84OPEN GAP

CLIP FIT STRIP CONNECTION

CLIP FIT STRIP CONNECTION

ALUMINIUM CEILING LINEAR STRIPS CLASS “0” FIREPROOF - EUROCLASS A1 - CORROSIONPROOF

mm. 84

mm. 16

mm. 16

mm. 84

PERFORATIONS AND SOUNDPROOFING

Ø mm 2 DIAMETER HOLES DIAGONAL CENTRAL SURFACE.

SPECIFICATIONSFalse ceilings system composed with linear stripes METALSCREEN type LC mm. 84 round angles open gap mm. 16 or mm. 6 or METALSCREEN type LT width mm. 100 closed gap (type, thickness, gap and colour choosed by the consultant) aluminium prepainted thickness mm. 0,5-0,6.The type LC or type LT/100 stripes will be installed on supporting main carrier type 63 galvanized hot dipped steel or painted black thickness mm. 0,6 and suspended with rigid steel galvanized hangers with metal snap suspension, finished with perimetrical wall angle frames “L” section type RA with connection joint. To obtain the best soundproofing result the type LC or type LT/100 stripes must be perforated with holes diameter Ø mm. 3 or Ø mm. 2 on the total surface with acoustical “TNT” non vowen textile thermal applied on the back of each stripe.

TECHNICAL SPECIFICATIONS

TYPE LCOpen

TYPE LSOpen ribbed

TYPE LTClosed

“TNT” acoustic

thermosticked

mm. 16

mm. 16

ALUMINIUM JOINT FILLER CLICK PROFILE FOR OPEN STRIPS TYPE LC/100 AND TYPE LS/100TYPE 46-Jointfillerclickprofileprepainings aluminium in black/white or also available in brilliant colours on request. Length: 3,000 mm. (incidence: LM 10x1 m2).

TYPE 46

63

63

mm. 134

Ø 3 mm DIAMETER HOLES DIAGONAL FULL SURFACE OF THE STRIP.

Ø mm 2 DIAMETER HOLES WITH REGULAR CENTRAL SURFACE

The strips can be perforated to obtain a good soundproofing level result within the frequency range of 200 to 4,000 Hz. Even higher levels can be increased with acoustic textile “TNT”non vowen which guarantees soundproofing even after repeated maintenance has been carried out on the ceiling panels. It reduces the installation cost and does not allow dangerous microfibres pollution into the air.



STRIP LC/100 OPEN (m. 84+16)

STRIP LC/90 OPEN (m. 84+6)

6 84 6 84 6 84 690 90 90

16 84 16 84 16 84 16100 100 100

STRIP LT/100 CLOSED GAP

16 84 16 84 16 84 16100 100 100

MOUNTING ON TYPE 63/U MAIN SUPPORTING CARRIERS PLEASE STATE PITCH 90-100-150

FLEXIBLE MAIN SUPPORTING CARRIER

TYPE 62/90TYPE 62/100(Please state pitch)

Flexible main supporting carrierStrip hanger LC-LS in galvanized steel or painted black,thickness 0.6 mm. Length: 4,000 mm.

LIGHTING FIXTURES

1x18 W / 1x36 W / 1x58 W

TYPE: 63/U90 - 63/U150

Main supporting carrier galvanized steel or prepainted black. Lenght: 4,000 mm. Gap nr. 6-16. Thickmess 0,6 mm.

STRIP LT/150 CLOSED GAP

16 84 16 84 16 84 16100 100 100

134 134 134

galvanized steelhangers type 100 Ø 4 mm.metalsnap

type 23/double

main supporting carrier type 63

150 150 150

20

40

NUOVO

NEW

L

INE

AR

ST

RIP

ES



ALUMINIUM CEILING LINEAR STRIPS CLASS “0” FIREPROOF EUROCLASS A1 - CORROSIONPROOF

mm. 150 - mm. 200 - mm. 300

mm. 19

Type LA/150Type LA/200Type LA/300

mm. 150 - mm. 200 - mm. 300

mm. 19

Type LA/150 RIV-WITHOUT JOINT GAPType LA/200 RIV-WITHOUT JOINT GAPType LA/300 RIV-WITHOUT JOINT GAP

Type LD - R WIDTH mm. 200-300SELF SUPPORTING WITH BEVELLED RENFORCED EDGES

Fast installation Quick maintenance each stripes can be removed only with one hand. Particularly suggested for: corridors - restrooms - small rooms - lift elevators. self supporting without any hangers or carriers only lay-in on wall angles perimetrical frames. Maximum self support mm. 3300 without carriers.

01

PITCH mm. 150-200-300

TECHNICAL SPECIFICATION:False ceilings system composed with self supporting linear stripes METALSCREEN type LD-R SELF SUPPORTING width mm. 200 or mm. 300 (width and colour choosed by the consultant) aluminium prepainted thickness mm. 0,6.The type LD-R SELF SUPPORTING stripes will be installed lay-on the perimetrical wall angle frames “L” section type RA with connection joint. The stripes must be height mm. 29 and with the renforced bevelled edges to obtain a perfect complanarity of the final result of the ceilings.To obtain the best soundproofing result the type LD-R SELF SUPPORTING stripes must be perforated with holes diameter Ø mm. 3 or Ø mm. 2 on the total surface with acoustical “TNT” non vowen textile thermal applied on the back of each stripe.

SELF SUPPORTING RENFORCED STRIPES FOR CORRIDORSTYPE LD-RSELF SUPPORTING RENFORCED BEVELLED EDGES

Rounded closing gap

Height mm. 29

Renforced bevelled edges

NUOVO

NEW

PARTICULARLY SUGGESTED FOR:• CLADDINGS • OUTSIDE CORRIDORS • PETROL GAS PUMP STATIONS• SUBWAY CORRIDORS • EXTERIOR CEILINGS

TECHNICAL SPECIFICATION:False ceilings system composed with linear stripes METALSCREEN type LA width mm. 150 or mm. 200 or mm. 300 (width, thickness and colour choosed by the consultant) aluminium prepainted thickness mm. 0,5-0,6-0,7.The type LA stripes will be installed on supporting main carrier type 63 galvanized hot dipped steel thickness mm. 0,6 and suspended with rigid steel galvanized hangers with metal snap suspension, finished with perimetrical wall angle frames “L” section type RA with connection joint. To obtain the best soundproofing result the type LA stripes must be perforated with holes diameter Ø mm. 3 or Ø mm. 2 on the total surface

with acoustical “TNT” non vowen textile thermal applied on the back of each stripe.63



STRIP TYPE LA/150

MOUNTING ON TYPE 63/U AND TYPE 01 MAIN SUPPORTING CARRIES PLEASE STATE PITCH 150-200-300

mm. 150

TYPE: 63/U90 - 63/U100 - 63/U150 20

40

20

40

Main supporting carrier galvanized steel.Thickness: 0,6 mm. - Lenght: 4,000 mm.

TYPE: 63/150 Z

Main supporting carrier galvanized steel.Thickness: 0,6 mm. - Lenght: 4,000 mm.

Main supporting Omega rigid carrier galvanized steel.Thickness: 0,6 mm. - Lenght: 4,000 mm.

2775

20

TYPE: 01/150 - 01/200 - 01/300 “OMEGA” STRONG RENFORCED

PERIMETRICAL FRAME WALL ANGLE “L” SECTION mm. 24X24 WITH CONNECTOR JOINT

• QUICK AND EASY INSTALLATION

• PERFECT ALLIGNMENT• TOP AESTHETICS

RESULTS

NUOVO

NEW

TSTRIP TYPE LA/150 RIV. WIHOUT JOINT GAP

150 150

STRIP TYPE LA/200 RIV. WITHOUT JOINT GAPSTRIP TYPE LA/300 RIV. WITHOUT JOINT GAP

mm. 200mm. 300

mm. 200mm. 300

mm. 200mm. 300

STRIP TYPE LA/200 - STRIP TYPE LA/300

PERFORATIONS AND SOUNDPROOFING

“TNT” acoustic non woven

textile thermal adhesive

Ø mm 2 DIAMETER HOLES DIAGONAL CENTRAL SURFACE.

Ø 3 mm DIAMETER HOLES DIAGONAL FULL SURFACE OF THE STRIP.

The strips can be perforated to obtain a good sound proofing level result within the frequency range of 200 to 4,000 Hz. Even higher levels can be increased with acoustic “TNT” textile non vowen which guarantees

soundproofing even after repeated maintenance has been carried out on the ceiling panels. It reduces the installation cost and does not allow dangerous microfibres pollution into the air.

EXTERIOR CLADDINGS

L

INE

AR

ST

RIP

ES



MOUNTING ON TYPE 43 MAIN SUPPORTING CARRIERS

TYPE: 4320

40

Main supporting carrier prepainted steel black.Lenght: 4,000 mm. Gap: 20 mm. Thickness 0,6 mm.

43

Type GR 50

20 30 20 30 20 30 20 30 20 30 20 30 20 30 20 30 20 30

CUBE STRIP GR 50

mm. 30 mm. 50mm. 20

TECHNICAL SPECIFICATIONS:

False ceilings system composed with cube linear stripes MEtalsCREEn type GR50 width mm. 30 + 20open gap (colour choosed by the consultant) aluminium prepainted thickness mm. 0,5.The type GR50 stripes will be installed on

supporting main carrier type 43 prepainted black steel thickness mm. 0,6 and suspended with rigid steel galvanized hangers with metal snap suspension, finished with perimetrical wall angle frames “L” section type RA with connection joint. To obtain the best soundproofing result the type GR50 stripes must be perforated with holes diameter Ø mm. 3 or Ø mm. 2 on the total surface with acoustical “TNT” non vowen textile thermal applied on the back of each stripe.

ALUMINIUM CEILING CUBE STRIPES CLASS “O” EUROCLASS A1 FIREPROOF - CORROSIONPROOF

CUBE STRIP Type GR 50

Type 48 internal closing joint prepainted aluminium black/white or also available in brillant colours on request. Lenght: 3,000 mm.

INTERNAL CLOSING GAP PROFILE FOR CUBE STRIPES TYPE GR 50

48

mm.38

mm. 30

Type GR 50



ALUMINIUM CEILING VERTICAL STRIPS CLASS “0” EUROCLASS A FIREPROOF - CORROSIONPROOF

TECHNICAL FEATURES OF THE CEILING PANELLING COMPONENTS

44

100

100 100100 100

mm. 88

Type LH1VERTICAL STRIPES

TYPE LH1

TECHNICAL SPECIFICATIONS:False ceilings system composed with vertical stripes MEtalsCREEn type lH1 height mm. 88 pitch mm. 100 (colour choosed by the consultant) aluminium prepainted thickness mm. 0,6 painted one side.The type LH1 stripes will be installed on supporting main carrier type 44 prepainted white steel thickness mm. 0,6 and suspended with rigid steel galvanized hangers with metal snap suspension. To obtain the best soundproofing result the type lH1 stripes must be perforated with holes diameter Ø mm. 3 or Ø mm. 2 on the total surface with acoustical “TNT” non vowen textile thermal applied on the back of each stripe.

Using the vertical LH, suggested for large rooms, it point out the nicely and beautiful final result, with the comfortable diffusion light effect covering also all over the ceiling system: tubes, pipes, sprinklers, concealed control security videocameras.

PARTICULARLY SUGGESTED FOR:• SHOW ROOMS • AIRPORTS• SHOPPING MALLS • FOOD MARKETS• GARAGE • CORRIDORS

MOUNTING ON TYPE 44 MAIN SUPPORTING CARRIERS

VERTICAL STRIP TYPE LH1

100 100 100

130

TYPE 44

Main supporting carrier prepainted steel white.Lenght: 4,000 mm.

30

42

39

L

INE

AR

ST

RIP

ES



LINEAR STRIPES

LACLOSED GAP

SHARPANGLES GR 50

CUBE

LHVERTICAL

LCOPEN GAP

ROUNDANGLES

TYPE LH1

Renforced bevelled edges

LAY-ONWALLANGLESWITHOUTSUSPENSION RUNNERS

PITCH mm. 100-90

mm. 16-6

TYPEPROFILE

LD-RSELF

SUPPORTINGRENFORCED

WITHBEVELLED

EDGESLS

RIBBED

LA-RIVCLOSED

WITHOUTJOINT SHARP

ANGLES

PITCH mm. 100-150

LTCLOSED GAP

ROUNDANGLES

mm. 16-6

PITCH mm. 150-200-300

LINEAR STRIPES OF PREPAINTED ALUMINIUM FIRE EACTION “O” FIREPROOF - CORROSIONPROOF - WASHABLE - PLAIN OR PERFORATED - AVAILABLES ALSO IN PREPAINTED STEEL

TYPEPROFILE

LINEAR STRIPES OF PREPAINTED ALUMINIUM FIRE EACTION “O” FIREPROOF - CORROSIONPROOF - WASHABLE - PLAIN OR PERFORATED - AVAILABLES ALSO IN PREPAINTED STEEL

mm. 30

48

PITCH mm. 200-300

TYPE 46

84

84

mm. 50 mm. 20

NUOVO

NEW

63/150 Z

63/U9063/U10063/U150

(SPECIFY THE PITCH)

TYPEPROFILE

ACCESSORIES AND PROFILES TOINSTALL THE CEILINGS SYSTEM

Length mm. 4000

Length mm. 4000

mm. 150

Main supporting runner (stripes LA/150-LA/300)galvanized steel thickness mm. 0,6

Main supporting runner (stripes LC-LT-LA/200-LS)

20

40

20

40

FALSE CEILINGS SYSTEMS LINEAR MODULAR STRIPES FIREPROOF

43

PITCH mm. 150-200-300

TYPE 46

PITCH mm. 100-90

WE COSTOMIZE ANY LENGHT

UPON REQUEST OF THE CUSTOMER

29

TYPE 01 OMEGA RENFORCED

STRONG MAIN SUPPORTING

CARRIER HOT DIPPED

GALVANIZED STEEL

Renforced rebated profile became mm. 1,2



PROFILES AND ACCESSORIES

S

US

PE

NS

ION

SY

ST

EM

S A

ND

AC

CE

SS

OR

IES

FO

R C

EIL

ING

S

FALSE CEILINGS SYSTEMS LINEAR MODULAR STRIPES FIREPROOF

02

23/D

BRBANDRASTER

mm. 50mm. 100

SM9

100

43

15/30°SUN LOUVER

SUN BREAKERS

15/45°SUN LOUVER

SUN BREAKERS

62/9062/100

FLEXIBLE

TYPE ACCESSORIES AND PROFILES TO INSTALLTHE CEILINGS SYSTEMS TYPE ACCESSORIES AND PROFILES TO INSTALL

THE CEILINGS SYSTEMS

Length mm. 4000

Length mm. 4000

Suspension thin roll galvanized steel for hangers.Each roll (LM 100)Withholesforanykindof hangers

Metal double snap for suspension on rigid hangers

Main supporting carrier (stripes gr 50)prepainted steel black thickness mm. 0,6

Main supporting runner for LC FRANGISOLE 30°prepainted whitealuminiumthickness mm. 1,00

Length mm. 4000

Main supporting runner for LC FRANGISOLE 45°prepainted whitealuminiumthickness mm. 1,00

mm. 84

Length mm. 4000

Length mm. 3000

Main flexible carrier (stripes LC-LS)prepainted steel black thickness mm. 0,6

30

mm. 15

mm. 16 - 13mm. 36-33

mm. 50

mm. 100

BR-50

BR-100

RU-16RU-13

Upstand “F” trym prepainted steel white and silver matt (RAL 9006) length mm. 3000

Perimetrical wall angle shadow mould “double L” section

mm. 19x9x9x19x3000 preprinted steel

Rigid suspenson hanger galvanized steel Ø 4 diam.various length and corners final shes

8

CTYPE 100/C 250 mm. - TYPE 100/C 500 mm.TYPE 100/C 1000 mm.

8

BTYPE 100/B 1000 mm.

8

ATYPE 100/A 500 mm.TYPE 100/A 1000 mm.

8

STRAIGHT

TYPE 100/2000 mm.

steel white and silver matt (RAL 9006) length mm. 4000

mm. 84

mm. 16

mm. 84

mm. 16

mm. 16

20

40

Main supporting Omega renforced runner strong galvanized steel thickness mm. 06 stripes LA - LA/RIV.OMEGA

01(SPECIFY

THE PITCH)STRONG

RENFORCED

20

75

27

∅ 8

RA“BAIONETTA”

CONNECTOR JOINT

Perimetrical wall angles frames type RA with connector joint

NUOVONEW

4648

Jointfillerforclosinggap(linear stripes type LC - LS - GR50) aluminium white/black

TYPE 46TYPE 48SEAGULL

HD

Perimetrical wall angle “C” section mm. 15x20x18H(linear stripes LC - LT - LS)

PrimaryRunner clicktype PS

Type PC-27Amain runner

Type GPS metal snap adjustment for main runner click profile type PS

GYPSUM BOARD“K” CEILINGS KIT

PSPC-27A

GPS

Length mm. 4000

Length mm. 3000



S

UN

BR

EA

KE

RS

- S

UN

LO

UV

ER

S A

ND

EX

TE

RIO

R C

LA

DD

ING

S ALUMINIUM STRIPES SUN LOUVERS AND CLADDINGS

TECHNICAL SPECIFICATIONExternal cladding with linear stripes mm. 84 METALSCREEN type “LC FRANGISOLE” sun breaker to obtain a sun louver with inclination degrees 30° or 45° (the inclination 30° or 45° and colour choosed by the consultant).The stripes are made of prepainted aluminium corrosionproof incombustible class “0” - Euroclass fire reaction A1 width mm. 84 with round angles and thickness of mm. 0,6.The “LC FRANGISOLE” sun breaker will be installed clip-on main supporting carriers installed each mm. 600 between the carriers are made of prepainted aluminium thickness mm. 1,00 and colour white on both sides.

TECHINICAL CARATHERISTICS OF THE LC 84 FRANGISOLE FOR OUTSIDE

TYPE LC 84

TYPE LS 84ribbed

MAIN SUPPORTING RUNNERS

15/45° 15/30°

MAIN SUPPORTING RUNNER TYPE

15/45°

STRIP LC 84

INDICATIVE MATERIAL INCIDENCE PER M2

Strip Type LC/45° LC/30° LS/45° LS/30°

Strips 11,54 14,50 (ml.)

Main Carriers 1,40 1,40 (Kg/mq.)

LINEAROPENFAÇADES-SUNBREAKERS

TO OBTAIN MORE SOUND ABSORBITION AND NOISE PROTECTION, THE LINEAR STRIPLES

AVAILABLE MICROPERFORATED Ø mm. 2

METALSCREEN®



MICROPERFORATED Ø 2 mm. STRIPES

45° ANGLE 30° ANGLE

38

METALSCREEN®



TWIN LOCK ® METAL SUSPENSIONS T BAR SYSTEMS ANTISEISMIC LOCK FOR

EXPOSED LAY-IN CEILINGS

EXPOSEDGRIDLAY-INSYSTEMS“ANTISEISMICLOCK”STANDARD COLOUR: • WHITE STANDARD (RAL 9003)EXTRACOLOUR: •Black (RAL 9005) • Pearl white (RAL 1013) • Metallic Silver matt (RAL 9006) • Gold-Silver (mirror finishes)

38

24

38

15

Slots forhangers

Type RA.24.24 “BAIONETTA”Wallangle“L”mm.24x24sectionwithjointcoupling mm. 3000

Jointcoupling

Type RJC.11.12Joggleendeddeepstalkcross tee mm. 1200 x H 38

Type RJC.11.06Joggleendeddeepstalkcross tee mm. 600 x H 38

Type SM9mm. 19x9x9x19Shadow moulding Double “L” trimmm. 3000

Fireproofexpansion joint

Type RM.1.36Main runner “Fireproof” mm. 3600 x H 38

Rigid suspension

hangers steel type 100 +

metal snap type 23/D

Joggled

“Torsion proof”renforces

Traditional antiseismic joint lock ANGLE TRIM “L” SECTION

RIGIDTRIM ®

Type SM9Shadow moulding

Type RU-16 / RU-13Upstand trim “F” section

Type RA.24.24whit connector joint

30

15

16 - 1333

KINDLY ASK OFFER FOR FULL TRUCK OR CONTAINER

NUOVO

NEW

H = mm. 38all profiles

Main runners and cross tees

M

ET

AL

SU

SP

EN

SIO

N A

NT

ISE

ISM

IC L

OC

K E

XP

OS

ED

GR

ID L

AY

-IN

SY

ST

EM

•MINERALFIBERS•GYPSUMBOARD•PLASTERBOARD

METALSCREEN®



TWIN LOCK ® METAL SUSPENSIONS T BAR SYSTEMS ANTISEISMIC LOCK FOR

EXPOSED LAY-IN CEILINGS

PERIMETRICAL WALL ANGLE “L” SECTION mm. 24x24 WITH CONNECTOR JOINT

• FAST INSTALLATION

• PERFECT ALIGNMENT

• AESTETIC BEST RESULT

NUOVO

NEW

M

ET

AL

SU

SP

EN

SIO

N A

NT

ISE

ISM

IC L

OC

K E

XP

OS

ED

GR

ID L

AY

-IN

SY

ST

EM

SELECTED STEEL MATERIAL - FIRST CHOICE - TOP QUALITYHot-dipped galvanized dry steel for BODY and pre-painted ALUMINIUM CORROSIONPROOF for CAP. Both of these material can meet with either ASTM or CNS standard and CE EN 13964:2004 - CE EN 14195:2005. Good quality of material can make sure the ceiling grid in qualified structure and loading ability when forming the body shape during the production process.Be carefully, make attention to all manufacturers that use the pre-painted galvanized steel for CAP that became yellow, change colour in short time and corrosion and dust damage seriously the stability of the grid system WARNING.Require the T bar grid system with the CAP made of pre-painted ALUMINIUM CORROSIONPROOF suitable also for external use and humidity wet place, swimming pools, sauna, steam bath, fitness centers and kitchens.

PLASTERBOARD GYPSUM BOARD

ACOUSTICAL MINERAL FIBERS

OPEN CELL SYSTEMS

PANELS SYSTEMS

40

METALSCREEN®


All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings G

AL

VA

NIZ

ED

PR

OF

ILE

S F

OR

GY

PS

UM

BO

AR

D W

AL

LS

AN

D C

EIL

ING

S

TEAM “K”GALVANIZED HOT DIPPED STEEL PROFILES FOR GYPSUM BOARD EUROPEAN TEST EN 13964:2004 - EN 14195:2005 “FIRST STEEL”

G50

G55

G75

G100

M50

M55

CHANNEL TRACK FOR WALLS mm. 50

Galvanized steel 0,6mm. 40x50x40

standard length mm. 3000










TYPE PROFILES DESCRIPTION TYPE PROFILES DESCRIPTION

VERTICAL STUD FOR WALLS mm. 75

Galvanized steel 0,6mm. 50x73.8x47





SUPPORTING MAIN RUNNER FOR CEILINGS mm. 50


round angles - sharp anglesstandard length mm. 3000

SUPPORTING SLIM MAIN RUNNER FOR CEILINGS mm. 50


round angles - sharp anglesstandard length mm. 3000

WALL ANGLE PROFILE “L” SECTION

mm. 30x30 - mm 40x30Ribbed surface

Galvanized steel 0,6standard length mm. 3000

WALL EDGE“U” PROFILE “U” SECTION

mm. 30x28 - mm 30x16Galvanized steel 0,6

mm. 30x28.8x30 - mm. 30x16x30standard length mm. 3000

COVER CORNER PROFILE FOR WALLS

Perforated ribbed surfaceGalvanized steel 0,6

mm. 30x30standard length mm. 3000

PRIMARY MAIN CLICK RUNNER FOR PC 27-A 40x28Galvanized steel 0,7

mm. 40x28x40standard length mm. 4000

METAL SNAP ADJUSTMENT FOR SUSPENSION

OF MAIN RUNNER CLICK PROFILE TYPE PS







• All profiles are rollformed from hot dipped 1st galvanized steel DX51DZ• All profiles are tested and certified EN-ASTM• Extra standard lengths: can be customized upon customer request

COVER EDGESGalvanized steel 0,6


COVER CORNER FLEX PROFILEGalvanized steel 0,6


COVER EDGES FLEX PROFILEPrepainted white


WHITE

23

14

36

25

23

14

LENGTH ON REQUEST

thicknessmm. 0,7

M75

M100

L3030L4030

U28U16

PAR 30

C23

PARAFLEX

COPRIFLEX

“U” PROFILE FLEXTYPE UFLEX28

mm. 28x30LENGTH mm. 3000

“U” PROFILE FLEXTYPE GFLEX50


“U” PROFILE FLEXTYPE GFLEX75


“L” PROFILE FLEXTYPE LFLEX75


“L” PROFILE FLEXTYPE LFLEX50


TYPE PARVAR PERFORATED CORNER PROFILE

VARIABLES ANGLE 180° LENGTH mm. 3000

PC27-APC27-S

PC15-APC15-S

PS

GPS

METALSCREEN®



42

METALSCREEN®



METALSCREEN®



41030 BOMPORTO MOdena- ITaly eUVia A. Moro, 38Tel. +39 059/8170611Fax +39 059/8170633Fax +39 059/8170632 [email protected]

PEACEFRIENDS

THE ALUMINIUM FALSE CEILINGIT IS NOT DANGEROUS FOR YOUR HEALTH

al• •

ALUM

INIUM IS RECYLABE

ALUMINIUM IS RECYLAB

E

BOMPORTO

eUROPean TeST aPPROVal EN 13964:2004 - EN 14195:2005

QualityManagementSystemOperatedUNI EN ISO 9001:2000

B U YI TA L I A NPRODUCTS

NO ASBESTOS

KINDLY ASK FOR OUR PRICES AND CONTACT US FOR ANY OTHER FURTHER CLEARIFICATION

How to meet us in MeTalSCReen:

a22 BRenneRO: EXIT CARPIDIRECTION TO: SOLIERA - SORBARA BOMPORTO INDUSTRIAL AREA

a1 (FROM nORTH): EXIT MODENA NORDDIRECTION TO: VERONA - MIRANDOLA BASTIGLIA - BOMPORTO INDUSTRIAL AREA

a1 (FROM SOUTH): EXIT MODENA SUDDIRECTION TO: FERRARA - CAMPOSANTOFINALE EMILIA - BOMPORTO INDUSTRIAL AREA

a13 (FROM eaST): EXIT FERRARA NORDDIRECTION TO: FINALE EMILIA - CENTOBOMPORTO INDUSTRIAL AREA

neaReST InTeRnaTIOnal aIRPORT: BOLOGNA G. MARCONI

We are dedicated manufacturing sustainable product. Our paint and aluminium melting processes are considered to be one of the industry standards in terms of clean production processes. All aluminium products are 100% recyclable at the end of their lifecycle.

MODENA IS A BEAUTIFUL AND QUIET CITY PLACED IN NORTH ITALY. IN MODENA WITHOTHERSLEADINGINDUSTRIAL COMPANY THERE IS THE FERRARI CAR FACTORY: THE MOST FAMOUS SPORTCARS OF THEWORLD.

MODENA

Bas

elito

s.r

.l. 1

0/20

09

false ceilings industry building profiles and …€¦ · metalscreen® metalscreen® s.p.a. - via...

Documents