faraone informs np18 - ninfa3, the third generation
DESCRIPTION
NINFA3, THE THIRD GENERATION. Is based on the experience of more than 120,000 meters of NINFA installed in 4 years and the total satisfaction of customers and installers. The Ninfa 2013 project was born to establish new records. - ALWAYS ADJUSTABLE GLASS BANISTER. - NEVER AGAIN WATER INSIDE THE FASTENING HOLE. - REDUCTION OF GLASSES THICKNESS - INSTALLATION TIME REDUCED BECAUSE OF PRE-INSTALLED ACCESSORIES - THRUST RESISTANCE CERTIFICATION OF 200 AND 300 KG/M WITH THE SAME PROFILE - PROFILE HEIGHT REDUCED TO 120 MMTRANSCRIPT
02/201418NINFA3THE THIRD GENERATION WITHIN THE NINFA FAMILY, AN ANNOUNCED SUCCESS!!
ITALIAN STYLE
PN / Product News
INFORMS
www.faraone.it
NINFA3 NINFA MURETTO NINFA50
WITHNINFA3,EVERTHINGISCHEAPER!
WITH NINFA, YOU ARE ALWAYS A STEP AHEAD!
FARAONE INFORMS NP182
NINFA3THE THIRD GENERATION is based on the experience of more than 120,000 meters of NINFA installed in 4 years and the total satisfaction of customers and installers.The Ninfa 2013 project was born to establish new records.
patented system . design Nino Faraone / Matteo Paolinistatic project . Mr. Gabriele Romagnoli
- REDUCTION OF GLASSES THICKNESS- INSTALLATION TIME REDUCED BECAUSE OF PRE-INSTALLED ACCESSORIES - THRUST RESISTANCE CERTIFICATION OF 200 AND 300 KG/M WITH THE SAME PROFILE - PROFILE HEIGHT REDUCED TO 120 MM
new 2014
ALWAYS ADJUSTABLE GLASS BANISTER.
NEVER AGAIN WATER INSIDE THE FASTENING HOLE.
adjustingkey
Anti-water infiltration gasket.PATENTED SYSTEM
ITALIAN STYLE
PN / Product News FARAONE INFORMS NP18 3
the glass banister is certified for a thrust resistance of 200kg per linear meter with a 8+8+0.76 glassinstead of a 10+10+1.52 one,and 300kg per linear meter with a 10+10+1.52 glass instead of a 12+12+1.52. with the same warranty.
FASTENING SCREWS
BY USING THE CARTERS YOU HAVE EXCLUSIVE ADVANTAGES:
- WITH NINFA3 THE FASTENING SCREWS TO ADJUST THE GLASS ARE SUPPLIED IN CONTINUOUS BARS, IN ORDER TO FASTEN THE GLASS ALL ALONG ITS LENGTH. THE FIRST AND ONLY SYSTEM IN THE WORLD.
1 BY MOUNTING THE CARTERS AT THE END OF THE WORKS, YOU AVOID ALL DAMAGES UNINTENTIONALLY PRODUCED BY WORKERS;2 IN CASE OF FUTURE DAMAGES, THEIR SUBSTITUTION WILL BE FAST AND SIMPLE;3 TRANSPORTATION CAN DAMAGE THE PROFILES, BUT IT IS CHEAPER TO CHANGE THE CARTERS RATHER THAN TO CHANGE THE PROFILES;4 THEY COVER UP NINFA PROFILES’ JUNCTIONS AND ANY WATER DRAINING;5 THE USE OF CARTERS AUGMENTS THE CHOICE OF AVAILABLE FINISHINGS AND COLORS.
WITHNINFA3,EVENGLASSES*ARECHEAPER !
register
carter
Ninfa3 in itsLED version
* ON
LY T
EMPE
RED
GLAS
S
FARAONE INFORMS NP184
FARAONE TAKESCARE OF:
FARAONE TAKESCARE OF:
Drilling the base of the profile every 30cm (thrust resistance 200kg/m) or every 20cm (thrust resistance of 300kg/m), inserting the fastening screws and the rigid gasket intheir place. 01A IMPORTANT:the rubber gaskets areemployed to avoid waterinfiltration in thefastening hole 01B you only needto drill the floorand fasten theprofile withFaraone’scertifiedscrews
< internal side < internal side
fasteningscrews tobe placedapproximatelyevery 30cm
external adjusting screws
Making it easy foryou to insert theglass in the profile 2A supplying you witha profile with gasketinserted, which blocksthe glass when youinsert it andcompensates thethickness differences 2B supplying youwith the internaladjustment system(with gasketinserted) to hookon the adjustingscrews
01 02
Anti-water infiltration gasket.PATENTED SYSTEM
2B
2A
01A rubber gasket
FARAONE TAKESCARE OF:
YOU ONLYNEED TO:
< internal side
< internal adjusting screws
< internal carter
external adjusting screws
externalcarter
>
>
Supplying you witha system to easilyadjust the glass withthe fastening screws.You only need toclamp down theinternal and externaladjusting screwsin order to fastenthe glass
Check thateverything is welldone and fix thecarter with a click.The carter hasalready thegaskets on.You are alreadydone!
03 04
ITALIAN STYLE
PN / Product News FARAONE INFORMS NP18 5
8+8+0.76PVB
max
800
1020
/ 11
2090
NINFA MURETTOTHE ALWAYS ADJUSTABLE ALL GLASS BANISTER.
All goals setby Faraonehave beenachieved
patented system . design Nino Faraone / Matteo Paolinistatic project . Mr. Gabriele Romagnoli
- The use of 8+8+1.52 tempered laminated glass only- Maximum height of glass: 800mm- Profile height: only 90mm- Speedy installation - Thrust resistance certification of 200kg/m
FARAONE INFORMS NP186
adjustingkey
< internal side
new 2014
NINFA MURETTOTHE ALWAYS ADJUSTABLE, ALL GLASS BANISTER. PROFILE HEIGHT OFONLY 90mm.
Place the profile as close as possible to the internal side of
the wall to avoid all climbing possibility
NINFA MURETTOHASARRIVED!
ITALIAN STYLE
PN / Product News FARAONE INFORMS NP18 7
FARAONE INFORMS NP188
external internal
anti-climbingbarrier for kids
max 15
62
max
600
66.5
43.2
NINFA50THE SMALLEST OF THE NINFA FAMILY.
Designed to be used witha glass height of maximum 60cm and certified for 200kg/m
design Nino Faraone / Roberto Volpestatic project . Mr. Gabriele Romagnoli
- Only 8+8+0.76/1.52 tempered glass- Maximum glass height of 600 mm- Maximum profile height of only 62mm- Speedy installation- Thrust resistance certification of 200kg/m
ITALIAN STYLE
PN / Product News FARAONE INFORMS NP18 9
READY TO INSTALL, SUPPLIED WITHCERTIFIED AND ALREADY INSERTED FASTENING SCREWS.
new 2014
ARTICLE and DESCRIPTIONPRICETECHNICAL DESIGN
95
120
M12 screwsare includedin the price
IN BARSRaw aluminium profile with fittings already inserted and certified fastening screws (chemical not included).The anodized aluminium carter for one side and its gasket are included.
NINFA3PRICE LIST2014
1 Only one price per linear meter, with all the fittings and Faraone’s certified Fischer fastening screws included;2 The thrust resistance certificate will be delivered and will be valid only with the use of the supplied screws, which are the ones employed during the laboratory tests to fix the profile on the concrete / On demand, screws to fix the profile on an iron girder, or other types, can be supplied. (The certificate doesn’t have any value if the profile is fixed on masonry or with unsuitable screws or resins).3 For every order which doesn’t include fastening screws, 3€ per linear meter (discount excluded) will be deduced from the below mentioned prices;4 Price increase: for every supply of profile and fittings for Ninfa 3 class of 300kg/m, there will be a price increase of 4€ per linear meter due to the higher number of holes and fastening screws required;5 For every anodization of 20 microns, there will be a price increase of 8%.
92,5
116
M12 screwsare includedin the price
M13-1T/16/Akit with fittings for a 8+8+0.76/1.52 glass
M13-1T/20/Akit with fittings for a 10+10+1.52 glass
M13-1/16/Ckit with fittings for a 8+8+0.76/1.52 glass
M13-1/20/Ckit with fittings for a 10+10+1.52 glass
M13-1/16/Bkit with fittings for a 8+8+0.76/1.52 glass
M13-1/20/Bkit with fittings for a 10+10+1.52 glass
M13-1/16/Akit with fittings for a 8+8+0.76/1.52 glass
M13-1/20/Akit with fittings for a 10+10+1.52 glass
M13-T/16kit with fittings for a 8+8+0.76/1.52 glass
M13-T/20kit with fittings for a 10+10+1.52 glass
M13/16kit with fittings for a 8+8+0.76/1.52 glass
M13/20kit with fittings for a 10+10+1.52 glass
SILVER
RAL 9010
POLISHED SIMIL INOX
SILVER
RAW
RAW
in custom cut bars
in bars of 3 or 6m
in bars of 3 or 6m
in bars of 3 or 6m
in custom cut bars
in bars of 3 or 6mRaw aluminium profile with fittings already inserted and certified fastening screws (chemical not included).
price / euro/m
191,40
price / euro/m
170,50
price / euro/m
173,80
price / euro/m
167,20
price / euro/m
165,00
price / euro/m
147,40
FARAONE INFORMS NP1810
95
120
M12 screwsare includedin the price
CUSTOM CUT BARSRaw aluminium profile with fittings already inserted and certified fastening screws (chemical not included).The anodized aluminium carter for one side and its gasket are included.
M13-2/16/Akit with fittings for a 8+8+0.76 glass
M13-2/20/Akit with fittings for a 10+10+1.52 glass
M13-2T/16/Akit with fittings for a 8+8+0.76 glass
M13-2T/20/Akit with fittings for a 10+10+1.52 glass
M13-2/16/Bkit with fittings for a 8+8+0.76 glass
M13-2/20/Bkit with fittings for a 10+10+1.52 glass
M13-2T/16/Bkit with fittings for a 8+8+0.76 glass
M13-2T/20/Bkit with fittings for a 10+10+1.52 glass
in bars of 3 or 6m
in custom cut bars
in bars of 3 or 6m
in custom cut bars
M13-2/16/Ckit with fittings for a 8+8+0.76 glass
M13-2/20/Ckit with fittings for a 10+10+1.52 glass
M13-2T/16/Ckit with fittings for a 8+8+0.76 glass
M13-2T/20/Ckit with fittings for a 10+10+1.52 glass
in bars of 3 or 6m
in custom cut bars
ARTICLE and DESCRIPTIONPRICETECHNICAL DESIGN
IN BARSRaw aluminium profile with fittings already inserted and certified fastening screws (chemical not included).The anodized aluminium carter for both sides and their gaskets are included.
CUSTOM CUT BARSRaw aluminium profile with fittings already inserted and certified fastening screws (chemical not included).The anodized aluminium carter for both sides and their gaskets are included.
ITALIAN STYLE
PN / Product News FARAONE INFORMS NP18 11
M13-1T/16/Ckit with fittings for a 8+8+0.76 glass
M13-1T/20/Ckit with fittings for a 10+10+1.52 glassRAL 9010
SILVER
SILVER
RAL 9010
RAL 9010
POLISHED SIMIL INOX
POLISHED SIMIL INOX
in custom cut bars
price / euro/m
194,70
price / euro/m
181,50
price / euro/m
214,50
price / euro/m
187,00
price / euro/m
220,00
price / euro/m
192,50
price / euro/m
225,50
120
97
M12 screwsare includedin the price
120
97
M12 screwsare includedin the price
M13-1T/16/Bkit with fittings for a 8+8+0.76/1.52 glass
M13-1T/20/Bkit with fittings for a 10+10+1.52 glassPOLISHED SIMIL INOXin custom cut bars
price / euro/m
196,90
FARAONE INFORMS NP1812
ARTICLE and DESCRIPTIONPRICETECHNICAL DESIGN
320 mm
116
mm
KIT including:- aluminium profile M13 of 320mm;- fittings for a 8+8+0.76 glass.- certified fastening screw (chemical not included).
Valid only for the class of 200kg.
KIT including:- aluminium profile M13 of 150mm;- fittings for a 8+8+0.76 glass.- certified fastening screw (chemical not included).
Valid only for the class of 200kg.
M13-N-320/16NINFA³ in pieces for a 8+8+0.76/1.52 glass
M13-N-150/16NINFA³ in pieces for a 8+8+0.76/1.52 glass
price / euro/cad.
57,20
price / euro/cad.
30,80
150 mm
116
mm
M13-3/16/Bcouple of profiles for a 8+8+0.76 glass
M13-3/16/Ccouple of profiles for a 8+8+0.76 glass
in bars of 3 or 6m
in bars of 3 or 6m
M13-3/16/Acouple of profiles for a 8+8+0.76 glass
M13-3/16/Dcouple of profiles for a 8+8+0.76 glass
SILVER
RAW
POLISHED SIMIL INOX
RAL 9010
in bars of 3 or 6m
in bars of 3 or 6m
price / euro/m
35,20
price / euro/m
23,10
price / euro/m
47,30
price / euro/m
41,80
116
320mm
150 mm
max 50 cm
couple of countinuouscarters
320mm
IN BARSCouple of aluminium anodized carters with their gasket.
For the 6 meters bars or custom cut bars of more than 3 meters, the order will be sent in a wood box to avoid damages to the profiles.(price to be quoted)
couple ofcountinuous
carters
2
40space availablefor mountingand dismantling
ITALIAN STYLE
PN / Product News FARAONE INFORMS NP18 13
ARTICLE and DESCRIPTIONPRICETECHNICAL DESIGN
en barres de 3m
in custom cut bars
in custom cut bars
in custom cut bars
M13-3T/16/Bcouple of profiles for a 8+8+0.76 glass
M13-3T/16/Ccouple of profiles for a 8+8+0.76 glass
M13-5sheet of silver satin aluminium or stainless steel, either satin or polished. To be bended as requested
M13-3T/16/Acouple of profiles for a 8+8+0.76 glass
M13-4profile and with double sided tape for fixing
SILVER
SILVER
POLISHED SIMIL INOX
RAL 9010
CARTER PRICE WILLBE QUOTED ACCORDING TO THE PROJECT
price / euro/m
52,80
price / euro/m
26,40
price / euro/m
64,90
price / euro/m
59,40
116
320mm
150 mm
max 50 cm
couple of countinuouscarters
320mm
CUSTOM CUT BARSCouple of aluminium anodized carters with their gasket.
For the 6 meters bars or tailor cut bars of more than 3 meters, the order will be sent in a wood box to avoid damages to the profiles.(price to be determined)
Couple of aluminium profiles with silver anodized angulars 20X40
couple ofcountinuous
carters
drowned profileEXAMPLE 1
EXAMPLE 2 EXAMPLE 3
90
87
387
97
FARAONE INFORMS NP1814
ARTICLE and DESCRIPTION
ARTICLE and DESCRIPTION
PRICE
PRICE
TECHNICAL DESIGN
TECHNICAL DESIGN
M13-6/Abouchon pour fermeture terminale en aluminiumanodisé argent (vis inox comprises)
M13-6/Bsimil inox anodized alumnium ending(inox screws included)
M13-6/CRAL 9010 Aluminium ending cap(inox screws included)
price / euro/cad.
7,80
price / euro/cad.
9,90
price / euro/cad.
7,803
97
118
NM01for 8+8+0.76/1.52 glass with fittings and floorfastening screws.
NM01Tfor 8+8+0.76/1.52 glass with fittings and floorfastening screws.
NM04aluminium silver anodized ending cap(inox screws included).
SILVER SATIN
SILVER SATIN
SILVER
in bars of 3 or 6m
in custom cut bars
price / euro/m
151,80
price / euro/m
172,70
price / euro/cad.
7,80
NINFA MURETTOPRICE LIST2014 Silver satin aluminium profile with fittings and gasket already installed.
Fixing drills performed every 30cm.
IMPORTANT:during the order, please specify the desired thrust resistance:200kg/m or 300kg/m.
DELIVERY: to be agreed.
BARS LENGHT (to be specified during the order)
ITALIAN STYLE
PN / Product News FARAONE INFORMS NP18 15
ARTICLE and DESCRIPTIONPRICETECHNICAL DESIGN
NM50kit with fittings for a 8+8+0.76 glass
NM50-Tkit with fittings for a 8+8+0.76 glass
NM50-1aluminium anodized ending cap (or painted)
SILVER
SILVER
SILVER
in bars of 3 or 6m
in custom cut bars
price / euro/m
104,50
price / euro/m
118,80
price / euro/cad
7,80
62 Silver anodized aluminium profile with fittings and fastening screws.
66,5
61.5
NINFA50PRICE LIST2014 DELIVERY FROM JANUARY 2014
News on the new installation:- dimensions: 5.50 X 2m- banisters fixed on concrete base in order to simulate a terrace (and not on an iron beam)- even the fastening screws are tested;- thrust resistance test carried on with a display for the control of the administrated force; frontal laser to read the banister flection;- test results are automatically printed. - thrust test performed with a leather bag and a tyre. - certification delivered by an authorized organisme. Important: pay attention to the fastening!Tests shows that mechanical screws or chemical fixing can slip away if they have not the appropriate size and if they are not tested.
NEW FARAONE TESTS LABORATORY
The 80 participants to the inauguration of the new installation during the 2nd FARAONE Expert Meeting in 2013.
NEW CERTIFICATION: all tests have been updated and are performed on a concrete base: Faraone is the first and only one in Italy to deliver the certification even for the screws.
FARAONE S.r.l.VIA PO, 1264018 TORTORETO (TE) ITALYTEL. +39 0861.784200FAX +39 0861.781035
layo
ut g
rafic
o: R
ober
to V
olpe
/ im
mag
ini f
otor
ealis
tiche
: Ste
fano
Spi
nosi
/ re
nder
di d
etta
glio
: Rob
erto
Vol
pe /
foto
cop
ertin
a: M
assi
mo
Moz
zillo
/ m
com
unic
are.
itA R C H I T E T T U R E T R A S P A R E N T I
ITALIAN STYLE
PN / Product News
Would you like to receive a specimen of ninfa3 or ninfa 50?Our specimens are deliveredfor free in their small suitcase; you will pay only the shipping.
authorized dealer
DON’T TASTE THE UNSAFE!
> M
odifi
catio
ns o
f the
pro
duct
s.
Our p
rodu
cts
are
subj
ect t
o co
ntin
uous
im
prov
emen
t and
for t
his
reas
on, t
he
char
acte
ristic
s of
the
cons
truct
ion
or d
esig
n ar
e su
bjec
t to
chan
ge w
ithou
t not
ice.