farmtrx moisture sensor brochure · 2020. 7. 8. · remove clean grain elevator lower door....
TRANSCRIPT
![Page 1: FarmTRX Moisture Sensor Brochure · 2020. 7. 8. · Remove clean grain elevator lower door. Determine mounting location using supplied instructions. Clamp plasma cutter guide to door](https://reader033.vdocument.in/reader033/viewer/2022060921/60ad3b952b3b9f595919184b/html5/thumbnails/1.jpg)
The FarmTRX Moisture Sensor adds moisture capability to your FarmTRX Yield Monitor.
Determine weight and volume lost to moisture
View & export moisture maps from the FarmTRX Web App
View instant & average moisture values on the FarmTRX Mobile App while harvesting
Moisture values enable wet & dry yield total calculations
MOISTURE SENSOR
MOISTURE SENSOR
How it works: The FarmTRX Moisture Sensor uses the dielectric properties of grain flowing over it, which is directly related to the grain’s moisture content.
Option 1: Plasma Cutter - Time: 30 Minutes
Remove clean grain elevator lower door. Determine mounting location using supplied instructions.
Clamp plasma cutter guide to door and cut hole for sensor face & mounting bolts.
Bolt moisture sensor to door, re-attach door to grain elevator, and plug wiring harness into Yield Monitor Interconnect Wiring Harness.
Option 2: Hole Saw & Grinder - Time 1 hr +
Remove clean grain elevator lower door. Determine mounting location using supplied instructions.
Tape drilling template to door, mark center points for hole-saw & mounting bolt locations. Using 1 ¾” hole saw, drill two holes at marked positions from template. Cut the remaining triangular sections using the template and a zipblade on a grinder. Drill mounting bolt locations.
Bolt moisture sensor to door, re-attach door to grain elevator, and plug wiring harness into Yield Monitor Interconnect Wiring Harness.
Installation Overview:
What’s Included:Moisture Sensor
Plug-and-Play Wiring Harness
Plasma Cutting Template
Mounting Hardware
Installs On Grain Elevator Door
1-877-702-8766 ext 1006