fast-protect+ technical info...technical info shape flashpoint viscosity ph: packaging storage...
TRANSCRIPT
FAST-PROTECT+PRODUCTDESCRIPTION
FAST-PROTECT+ is the leading stain repellent, specifi cally formulated for concrete and terrazzo fl oors. It is a CE marking product, that meets standard EN 1504-2 and penetrates up to 10mm or deeper (EN1504-2 Class ll).
FAST-PROTECT+ has been formulated with advanced, concentrated fl uoropolymers to protect against tough oil and water-based stains. The very small molecular structure allows for maxium penetration and provides coverage rates higher than many other sealers. The product is not a topical sealer, but a penetrating sealer that fi lls the microscopic gaps that occur in the fl oor’s crystalline structure, and does not change the appearance of concrete or terrazzo.
HEALTHAND PROTECTION
Safety isn’t expensive, it’s priceless. Always work safe!
• Wear safety shoes, safety glasses, gloves, a helmet and other protective clothing.
• When working with chemicals, wear a mouth mask.• Avoid excessive breathing of vapors or mists, especially in poorly
ventilated areas. • Avoid contact with eyes, skin or clothing. Wash thoroughly after
handling.• When feeling unwell or experiencing irritation on skin, eyes or
inhalation, consult a doctor immediately.• Consult the MSDS for more detailed information.
WWW.FAST-GRIND.COM
FAST-PROTECT+PRODUCTDESCRIPTION
FAST-PROTECT+ is the leading stain repellent, specifi cally formulated for concrete and terrazzo fl oors. It is a CE marking product, that meets standard EN 1504-2 and penetrates up to 10mm or deeper (EN1504-2 Class ll).
FAST-PROTECT+ has been formulated with advanced, concentrated fl uoropolymers to protect against tough oil and water-based stains. The very small molecular structure allows for maxium penetration and provides coverage rates higher than many other sealers. The product is not a topical sealer, but a penetrating sealer that fi lls the microscopic gaps that occur in the fl oor’s crystalline structure, and does not change the appearance of concrete or terrazzo.
HEALTHAND PROTECTION
Safety isn’t expensive, it’s priceless. Always work safe!
• Wear safety shoes, safety glasses, gloves, a helmet and other protective clothing.
• When working with chemicals, wear a mouth mask.• Avoid excessive breathing of vapors or mists, especially in poorly
ventilated areas. • Avoid contact with eyes, skin or clothing. Wash thoroughly after
handling.• When feeling unwell or experiencing irritation on skin, eyes or
inhalation, consult a doctor immediately.• Consult the MSDS for more detailed information.
WWW.FAST-GRIND.COM
TECHNICAL INFO
Shape
Flashpoint
Viscosity
pH:
Packaging
Storage
Storage life
Consumption
Clear liquidWeighs 1,02 kg / L
Not relevant
v < 7 mm2/s (40°C)
5,50 (+/- 0,5)Neutral
25 L bottle200 L drum Keep closed package in a cool and well-ventilated place. Prevent from moisture. Store only in the closed original container.
FAST-PROTECT+ can be kept at least 12 months in non freezing conditions and under 38°C.
15-30 m²/L (depends on the porosity of the concrete, level of polish and method of application)
ADVANTAGESFAST-PROTECT+
+ May be used in conjunction with all polished fl oors. + Protects against tough oil and water-based stains. + Low odor. + VOC compliant.
HOWTO USE
Remove all athmosperic dirt and make sure the surface is clean, dust-free, grease-free and dry.
Shake the product well before use and do not dilute it.
Always carry out a test on an unnoted spot.
Evenly apply up to two thin coats of FAST-PROTECT on the surface with a sprayer and wipe open with a mop and let it dry for 24 hours.
Do not overlapply, eliminate any exceeding product before drying.
On vertical surfaces, apply from the bottom-up.
SPECIAL CONSIDERATIONS
• Spills must be cleaned on a regular basis.• Contains: fl uorinated acrylic copolymer, glycol Ether EB.• Dispose waste in compliance with your local law
TECHNICALSUPPORT
Technical questions? Don’t hesitate to contact your local distributor.
Distributor stamp