features & benefits technical data logistic data
TRANSCRIPT
The Einhell TC-WG 200 wet grinder is ideal for sharpening your tools without damaging the workpiece being worked on. The universal device provides
flexibility and the corrosion-resistant water tank cools the piece. Honing compound can be used for polishing the workpiece. The angle gauge for
adjusting the grinding angle is included in the delivery. The grinding wheel can be prepared using the grinding stone. Four rubber feet absorb vibrations
and ensure a secure and steady standing position. The product is supplied complete with a slow-turning, fine grained wet grinding wheel and a leather
honing wheel for removing grinding burrs.
Wet Grinder
TC-WG 200Item No.: 4418008
Ident No.: 11019
Bar Code: 4006825649963
Features & BenefitsCan be used for wet grinding-
4 rubber feet for standing securely and with low vibrations-
Corrosion-resistant water tank for cooling the workpiece-
Complete with leather honing wheel for removing burrs-
Complete with slow-speed, fine-grained wet grinding wheel-
Universal device for grinding a wide range of tools-
Grinding stone for preparing the grinding wheel-
Honing compound for polishing the workpiece-
Angle gauge for adjusting the grinding angle-
Technical Data- Mains supply 220-240 V | 50 Hz
- Power 125 W
- Idle speed 110 min^-1
- Grinding wheel mount diameter 12.7 mm
- Wet grinding wheel 200 x 32 x 40 mm
- Idle speed (wet grinding wheel) 110 min^-1
- Grain size (wet grinding wheel) 220
- Polishing wheel 180 x 30 mm
- Idle speed (polishing wheel) 110 min^-1
Logistic Data- Product weight 7.33 kg
- Gross weight single packaging 9.5 kg
- Dimensions single packaging 350 x 263 x 324 mm
- Gross weight export carton 9.5 kg
- Dimensions Export Carton 350 x 260 x 325 mm
Illustrations can contain accessories, which are not included in standard extent of deliveryIllustration similar (in design), production-wise modifications reserved
GS mark belongs to the product itself only, excluded accessoryGenerated at: 17.03.2021 11:32
Page 1