featuring sew classic curated group from - art gallery … · artallerarics.com stripe set 2: •...
TRANSCRIPT
f r e e p a t t e r n
f e a t u r i n g S e W C L a S S I C C U R AT E D G R O U P F R O M S t I t C H Y O U r S t Y L e
© 2020 Courtesy of Art Gallery Quilts LLC. All Rights Reserved.
SPT-85221Bright Star WaShed
PE-440Macchiatto
PE-458toaSty Walnut
FUS-SK-1306trouvaille routeS Sparkler
CAP-V-2003SiMple groWth
CAP-RV-8006lyriciSt’S diary
FE-516khaki
NE-104natural
CAP-V-2000clear reflectionS
CAP-RV-8007Sonic flor
CAP-VC-5005ruStic diaMondS
CAP-VC-5007tender grid
artgal lery fabr ics . com
FINISHED SIZE | 75" × 87"
faBr IC reQUIreMentS
CUtt Ing d IreCt IOnS
¼" seam allowances are included.WOF means width of fabric.
COnStrUCt IOn
Sew all rights sides together with ¼"seam allowance.
•For this project we will work with nine (9) different Strip Sets.
Stripe Set 1:
• take one (1) 3½ x Wof strip from fabric B. G. D, E, and sew them together in the order shown on diagram 1, repeat the same step one more time.
•cut twenty four (24) strips every 3½”.
• eight (8) 3½" x Wof strips fabric D.
• Six (6) 3½" x Wof strips fabric E.
• ten (10) 3½" x Wof strips fabric G.
• five (5) 3½" x Wof Strips fabric H.
• Seven (7) 3½" x Wof Strips fabric I.
• nine (9) 3½" x Wof Strips fabric J.
• one (1) 3½" x Wof Strips fabric K,L.
• three (3) 3½” x 3½” squares fabric K.
• four (4) 3½" x Wof Strips from fabric A ,
• eleven (11) 3½" x Wof strips fabric B, F.
• two (2) 3½” x 3½” squares fabric B .
• three(3) 3½" x Wof strips fabric C.
fabric A CAP-VC-5005 ⅞ yd.
fabric B SPT-85221 1 ⅓ yd.
fabric C CAP-RV-8007 ½ yd.
fabric D CAP-V-2003 ⅞ yd.
fabric E CAP-V-2000 ¾ yd.
fabric F NE-104 1 �∕₆ yd.
fabric G CAP-RV-8006 1 yd.
fabric H FUS-SK-11306 ⅝ yd.
fabric I CAP-VC-5007 ⅞ yd.
fabric J FE-516 1 yd.
fabric K PE-458 ¼ yd.
fabric L PE-440 ¼ yd.
.
BACKING FABRIC CAP-V-2003 5 ¾ yds (Suggested)
BINDING FABRIC fabric A CAP-VC-5005 (Included)
DIAGRAM 1
artgal lery fabr ics . com
Stripe Set 2:
• take one (1) 3½ x Wof strip from fabric F, B. G. D, and sew them together in the order shown on diagram 2. repeat the same step one more time.
• cut twenty four (24) strips every 3½”.
DIAGRAM 2DIAGRAM 3
Stripe Set 3:
• take one (1) 3½ x Wof strip from fabric J,F, B, G, and sew them together in the order shown on diagram 3. repeat the same step one more time.
• cut twenty four (24) strips every 3½”.
artgal lery fabr ics . com
DIAGRAM 4
DIAGRAM 5
Stripe Set 5:
• take one (1) 3½ x Wof strip from fabric H, I,J, F, and sew them together in the order shown on diagram 5, repeat the same step one more time.
• cut twenty four (24) strips every 3½”.
Stripe Set 4
• take one (1) 3½ x Wof strip from fabric I,J, F, B, and sew them together in the order shown on diagram 4, repeat the same step one more time.
• cut twenty four (24) strips every 3½”.
artgal lery fabr ics . com
DIAGRAM 7DIAGRAM 8
Stripe Set 7:
• take one (1) 3½ x Wof strip from fabric C,H,I,J, and sew them together in the order shown on diagram 8.
• cut twelve (12) strips every 3½”.
Stripe Set 6:
• take one (1) 3½ x Wof strip from fabric G, D,E,A, and sew them together in the order shown on diagram 6, repeat the same step one more time.
• cut eighteen (18) strips every 3½”.
artgal lery fabr ics . com
Stripe Set 8:
• take one (1) 3½ x 18” strip from fabric B, F, J, I, H, C ,L, C, H, I, J, ,F, and sew them together in the order shown on dia-gram 9,
• cut four (4) strips every 3½”.
Stripe Set 9:
• take one (1) 3½ x Wof strip from fabric K, A, E, D, G, B, F, B, G, D, E, A, and sew them together in the order shown
on diagram 10.
• cut twelve (6) strips every 3½”.
DIAGRAM 9
DIAGRAM 10
artgal lery fabr ics . com
Block 1:
•take one (1) Strip Set 1 (SS1), Strip Set 2 (SS2), Strip Set 3 (SS3), Strip Set 4 (SS4), Strip Set 5 (SS5) and sew them together.
•that will be Block 1. please repeat these step 11 more times.
•you should have twelve(12) Blocks 1 in total.
•Block 2:
•take one (1) Strip Set 5 (SS5), Strip Set 4 (SS4), Strip Set 3 (SS3), Strip Set 2 (2), Strip Set 1 (SS1) and sew them together.
•that will be Block 2. please repeat these step 11 more times.
•you should have twelve(12) Blocks 2 in total.
DIAGRAM 11
DIAGRAM 12
artgal lery fabr ics . com
for blocks and strip sets placement, please see diagram below.
DIAGRAM 13
artgal lery fabr ics . com
QUILt aSSeMBLY
Sew rights sides together.
• place Backing faBric on a large surface wrong side up. Stretch it with masking tape against that surface.
• place Batting on top of backing fabric.
• place top on top of the batting with right side facing up. Smooth away wrinkles using your hands.
• pin all layers together and baste with basting thread, using long stitches. you can also use safety pins to join the layers.
• Machine or hand quilt starting at the center and working towards the corners. remember that quilting motifs are a matter of personal prefer-ence. have fun choosing yours!
• after you finished, trim excess of any fabric or batting, squaring the quilt to proceed to bind it.
QUILt aSSeMBLY
B Ind Ing
Sew rights sides together.
•cut enough strips 1½" wide by the width of the fabric A to make a final strip 334" long. Start sewing the binding strip in the middle of one of the sides of the quilt, placing the strip right side down and leaving an approximated 5" tail. Sew with ¼" seam allowance (using straight stitch), aligning the strip’s raw edge with the quilt top’s raw edge.
• Stop stitching ¼" before the edge of the quilt (DIAGRAM B 1). clip the threads. remove the quilt from under the machine presser foot. fold the strip in a motion of 45° and upward, pressing with your fingers (DIAGRAM B2). hold this fold with your finger, bring the strip down in line with the next edge, making a horizontal fold that aligns with the top edge of the quilt (DIAGRAM B3). Start sewing at ¼" of the border, stitching all the layers. do the same in the four corners of the quilt.
• Stop stitching before you reach the last 5 or 6 inches. cut the threads and remove the quilt from under the machine presser foot. lay the loose ends of the binding flat along the quilt edge, folding the ends back on themselves where they meet. press them together to form a crease. using this crease as the stitching line, sew the two open ends of the binding with right sides together (you can help your-self marking with a pencil if the crease is difficult to see).
• trim seam to ¼" and press open. complete the sewing. turn binding to back of the quilt, turn raw edge inside and stitch by hand using blind stitch.
45˚
DIAGRAM B2
DIAGRAM B1 Stop stitching here
DIAGRAM B3 fold
DIAGRAM 15
artgal lery fabr ics . com
NOTE: While all possible care has been taken to ensure the accuracy of this pattern, We are not responsible for printing errors or the way in which individual work varies.
Please read instructions carefully before starting the construction of this quilt. If desired, wash and iron your fabrics before starting to cut.
artgal lery fabr ics . com
© 2020 Courtesy of Art Gallery Quilts LLC. All Rights Reserved.