GOVERNMENT OF THE PUNJABLIVESTOCK & DAIRY DEVELOPMENT

DEPARTMENT

Dated Lahore, the December, 2016NOTIFICATION

No. SO(I&C)/L&DD/_______, In exercise of the powers conferred under Section 25 of the Punjab Animals Feed Stuff and Compound Feed Act 2016, the Governor of the Punjab is pleased to make the following rules:-

1. Short title, extent and commencement.-(1) These rules may be cited the Punjab Animals Feed Stuff and Compound Feed Act 2016.

(2) They shall come into force at once.

2. Definitions._ (1) In these rules:

(a) “applicant” means the owner or his authorized agent who intends to obtain a license;

(b) “authorized officer” means the officer so authorized by the Government under these rules;

(c) “Director” means Directors Livestock of all Divisions and includes any other officer so authorized by the Government;

(d) “License” means authority given to manufacture feed stuff, compound feed or customer formula feed and feed ingredients to be used in compound feed.

(e) “license fee” means the fee charged from the applicant for the grant of license;

(f) “TMR” means it is combination of grain, milling by products, minerals and vitamin mixture, straws, silage/fodder which fortifies all the nutritional requirements of respective physiological stage and production of animals during 24 hours.

(g) “HAY” means after evaporating/drying the moisture up to 15% during sunshine is called Hay.

(h) “Silage” means fermented fodder which is prepared in the absence of air by addition or not of the special inoculum for fermentation.

(i) “Compound Feed” it is a combination of grains, cakes/meals, minerals and vitamins which provides all nutritional requirements of animals.

(j) “Customer Formula Feed” A feed which is formulated on the basic nutritional requirements at different physiological functions.

(k) “Feed Stuff” These are the nutrients organic and inorganic compounds which are chemically of nutritional worth.

(l) “NOC” means the authority to establish a feed mill for manufacturing and marketing animals compound feed or customer formula fed on the conditions mentioned in section 4 of the Ordinance; and

(m) “Act” means the Punjab Animals Feed Stuff and Compound Feed Act 2016.

(2) All other words and expressions used in these rules, but not defined shall have the same meanings as are assigned to them in the Act.

3. Conditions for grant of license.-1. (1) A person who desires to establish a feed mill (Compound feed, meals ,cakes ,TMR and any kind of material produced in raw or processed shape to feed the animals)to manufacture and market animals compound feed and to obtain license for the purpose, may submit an application in the Form prescribed in Schedule-I to the Feed Inspection Officer(Directors Livestock of all Divisions and DLOs of each district and as notified by the Government) for obtaining the NOC and shall annex with the application a non-refundable review fee of rupees Five thousand in the form of a bank draft favouring the Government.

(2). Delegations: Government may delegates all or any of its power and functions under this act to Directors or any other Officer by Name or Designation.

(3). Power to make Rules: Government may frame/ amend the rules for purpose of carrying out into affect the provisions of this act.

(4). Every license granted under the ordinance shall be displayed at a prominent place within the licensed premises and shall be open to inspection by Feed Inspector of each District. (5 ). Each Concerned Officer nominated by L&DD Department shall maintain a register, permanently bound and serially paged, containing the name and addresses of license holders and applicants for licenses and the location of their premises. (6). Every license shall be renewed annually and the annual renewal, and the cancellation or suspension or imposition of a penalty shall also be recorded therein. The register shall show the disposal of the applications and in the case of rejection, the grounds for such rejection.

(7). Each DLO shall provide the particulars regarding the name, address, the nature and the location of the business for which a license has been granted, cancelled or suspended by the Feed Inspector to The Director Livestock of each Divisions of the area in which the premises is situated.

2. Note:a. Registration of all feed materials and feed stuff is necessary.

Feed mill should have all the precautions regarding the safety protocols for the labour working in the area.

b. Lab protocols for DM, CP, Fiber, EE, Ash and Minerals should be well established. Mill management should hire an animal nutritionist /professional for lab analysis and feed formulation.

c. Mill management should hire services of professional Animal Nutritionist who will supervise all the operations from ingredient receiving till dispatch of finished product.

d. Lab should be well equipped to do complete proximate analysis and to get analysis of quality of a feed ingredient. The results should be cross checked from other nominated Laboratories as notified by the department.

e. There will be complete analysis of imported items including raw material and additives. Minerals premixes will be analyzed for its composition. Importer should provide/ intimate the source from where it is imported and provide the analysis report. Which could be cross verified from the Government designated labs.

f. Punjab Animal Feed Registration Authority (PAFRA) will be established working under the supervision of Secretary Livestock Punjab.

1

1- PAFRA can ban/ stop the local /imported uses of ingredient in the province if they found it harmful for animal health/ human health.

g. PAFRA will check the warehouse/ storage area of feed mill to check the quality of the ingredients. Feed unit management should give access to all material stored/ used as feed ingredient. PAFRA can seal a feed mill if anything found with wrong practice or hidden material used for animal feed.

h. The list of the processing machinery feed including Plant Machinery, Choppers, and Bailers etc. should be provided to PAFRA.

i. PAFRA will check the quality of feed, silage, Hay, TMR Meals, Cakes, and Wanda before it is brought to in the market. Substandard Feed, silage, Hay, TMR ,Meals, Cakes, and Wanda sale can be banned.

(2) The NOC shall be issued in the Form prescribed in the Schedule-II within fifteen days from the receipt of the application provided that the Feed Inspection Officer is satisfied that the conditions, mentioned of Schedule-I, are fulfilled.

(3) The NOC shall be valid for a period of two years from the date of issue. (4) After the mill has been established, the applicant who desires to obtain a

license for manufacturing and marketing animals compound feed may submit an application to the Feed Inspection Officer in the Form prescribed in Schedule-III and shall annex with the application an advance license fee of twenty thousand for feed and five thousand for preparation of marketing of hay and silage in the form of a bank draft favouring the Government.

(5) If the Feed Inspection Officer is satisfied that the conditions mentioned in sub-rule 3 have been fulfilled by the applicant, the Feed Inspection Officer shall, within one month of the receipt of the application, issue a license to the applicant in the Form prescribed in Schedule-IV or otherwise.

(6) A person shall be granted a license for the manufacture of compound feed, Customer Feed Formula/Hay/silage/Meals/Cakes/TMR unless:

a) he has an automatic or semi automatic feed plant;b) he has a laboratory of the standard prescribed by the Government

having facilities to carry out proximate analysis and mycotoxin estimation of compound feed or customer formula feed and the feed stuffs used for manufacture of the same in accordance with standards of proximate analysis as mentioned in schedule (V and VI);

c) he has experimental facilities for livestock or other animals to conduct biological trials of compound feed or customer formula feed.;

d) he has employed a qualified animal nutritionist(as whole or part time.e) he has given an undertaking that he shall manufacture compound feed

or customer formula feed:

i. for livestock according to the standard prescribed in Schedule (V and VI); and

ii. for other types of animals, according to such standard as the Government may frame from time to time, determine.

(7) In case, the grant of license is refused, the license fee shall be refunded to the applicant.

2

(8) A license granted under sub-rule (5) may be renewed annually on payment of renewal fee of rupees five thousand in the form of a bank draft favouring the Government.

4. License for existing feed mill.-(1)A person, who has established a feed mill and other requisite facilities for manufacturing and marketing animals compound feed or customer formula feed before the commencement of these rules shall, within one month from the date of notification of these rules, make an application for the grant of a license in the manner given in rule (3)

(2) The Feed Inspection Officer may direct the applicant to rectify such defects, make such improvements and add such facilities within such time as are mentioned in the notice.

(3) No license shall be granted until the order made under sub-rule (2) is complied with to the satisfaction of the Feed Inspection Officer. 5. License fee.-(1) The license fee, as prescribed in rule 3, paid by the applicant in any month of a calendar year shall be deemed to be the license fee for that calendar year.

(2) The license renewal fee shall be paid by the licensee on or before 31 st

January of every calendar year.

(3) If a licensee fails to apply for the renewal of license within the prescribed period, the Licensing Authority may renew the license: (a) up to 31st March on payment of renewal fee and penalty equal to 100% of the renewal fee; and (b) up to 30th June on payment of renewal fee and penalty equal to 200% of the renewal fee.

(4) If a licensee fails to apply for the renewal of license up to 30 th June, the license shall automatically stand cancelled.

6. Packing and Marking-(1) The compound feed or customer formula feed shall be packed in cotton or polypropylene woven bags or any other suitable material.

(2) Each packing material containing compound feed or customer formula feed shall have the following particulars legibly printed thereon:

(a) name and address of manufacturer; (b) license number; (c) type of compound feed or customer formula feed, date of manufacture and

batch number; and (d) net weight of the bag.

(3) In addition to the above, the licensee shall attach with the bag of compound feed or customer formula feed a printed tag bearing information regarding following nutrients and additives:

a) percentage of crude protein;b) percentage of crude fat;c) percentage of crude ash;d) batch or code number; ande) date of manufacture and date of expiry.

3

7. Procedure of samples.- Where an Inspector collect a sample, he shall prepare a declaration in triplicate as per Schedule-(VII) and shall hand over a copy of the declaration to the person from whose custody such sample was collected.

8. Procedure for analysis of samples by private persons. (1) If any person desires that a sample of feed stuff, compound feed of customer formula feed purchased by him, shall be analyzed by the Government in any of its approved laboratories, he may make an application to the Inspector in whose jurisdiction such person resides or carries on business.

(2) The applicant shall pay such fee for chemical analysis and biological trial as the Government may notifies/prescribes, from time to time, determine. 9. Precautions in taking samples.- The Inspector shall observe the following precautions at the time of taking samples of feed stuff, compound feed or customer formula feed.

(a) he shall take samples at a place not exposed to damp air, dust or sort; (b) the instrument to be used for sampling shall be clean and dry; (c) the capacity of the container to be used for filling samples shall not be

more than 0.5 kg; (d) after filling the container with sample, it shall be sealed, air tightened and

marked with details such as the date of taking sample, date of manufacturing and any other relevant particulars in the

presence of complainant or feed mill representative; and (e) he shall take samples in the ratio given below:

Number of bags Number of samples

2 to 8 29 to 27 328 to 64 465 to 125 5126 to 216 6217 to 343 7344 to 512 8513 to 729 9730 to 1000 101001to1331 and above. 11; and

(f) he shall prepare four different sets of samples, weight of each sample shall be about 0.5 kg which is to be taken from the top, middle and bottom (randomly) of

each bag of feed stuff, compound feed or customer formula feed and the sample so taken shall be thoroughly mixed before its submission for analysis. Note: Precautions in taking samples of Hay and Silage: The Inspector shall observe the following precautions at the time of taking samples of Hay and Silage.

(a) he shall take samples at a place not exposed to dust or sort; (b) the instrument to be used for sampling shall be clean and dry; (c) the capacity of the container to be used for filling samples shall not be

more than 0.5 kg;

4

(d) after filling the container with sample, it shall be sealed, air tightened and marked with details such as the date of taking sample, date of

manufacturing and any other relevant particulars in the presence of complainant or manufacturer or feed mill representative; and

(e) he shall take samples in the ratio given below:

Number of bags/bails Number of samples

2 to 8 29 to 27 328 to 64 465 to 125 5126 to 216 6217 to 343 7344 to 512 8513 to 729 9730 101001 to1331 and above. 11; and

10. Standards for approval of analytical laboratories.-The Government may approve analytical laboratories in public sector under section 10 of the Ordinance if a laboratory has the following facilities:

(a) has a distinct building and infrastructure;(b) has employed qualified animal nutritionist or chemist holding at

least graduate degree in the discipline; (c) has the requisite support staff; (d) has facility for proximate analysis including moisture %, crude protein %,

crude fat %, crude fiber % and total ash % , and minerals and quantitative aflatoxins determination; and

(e) such other facilities as the Government may specify.

11. Preparation of result of chemical analysis.- (1) The Incharge of the approved laboratory shall prepare the result of the analysis carried out by him in the form prescribed in schedule VIII.

(2) In case the analysis is carried out on the application of a private person, a copy of the result of the analysis shall be supplied to him on payment of such fee as the Government may determine.

12. Representation.- (1) A person aggrieved by an order refusing to grant an NOC or a license under these rules may, within fifteen days from the communication of such order prefer a representation against such order to the Divisional Director and the Director shall decide the representation within thirty days.

(2) Any person aggrieved by an order passed by the Director under sub-rule (1) may, within fifteen days from the communication of the order, prefer a second representation to Secretary to Government of the Punjab, Livestock and Dairy Development Department and the Secretary shall decide the representation within sixty days.

5

SECRETARYGOVERNMENT OF THE PUNJAB

LIVESTOCK AND DAIRYDEVELOPMENT DEPARTMENT

SCHEDULE-I (Under Section-4 of the Act)

APPLICATION FORM FOR THE GRANT OF NOC TO ESTABLISH NEW FEED MILL /ALREADY EXISTING FEED MILLS UNDER THE PUNJAB ANIMALS FEED

STUFF AND COMPOUND FEED ACT 2016

PART – A

1- Name of the Owner with CNIC # _____________________________

2- Mailing Address of the Owner _____________________________

10- Telephone No. of the Owner.

- Office. _____________________________- Residence. _____________________________

4- NTN Number _____________________________

5- Name/ address of Compound Feed Mill _____________________________

6- Telephone Number of Compound Feed Mill

- Office _____________________________- Mill Site _____________________________

Sr. # Parameters/ Conditions Remarks1 Copy of land ownership/ lease/rental agreement2 Permission from concerned TMA/DCO/

Municipal Authority/ Environment Protection Department etc, wherever required

3 Detailed building lay out plan Complete lay out plan of machinery

4 Capacity to manufacture compound feed ( metric ton per hour)

4 Detail of Machinery/ equipment to be installed 5 Detail of Laboratory facilities6 Detail of Experimental facilities for biological

trials7 Detail of graduate technical staff

7- Any other relevant information ______________________________

6

Date.____________________

Signature of the ApplicantTitle of the Firm, Address

( PART – B )

A F F I D A V I T

I,______________________________S/O,W/O,D/O ______________________

of M/S _____________________________________________ do hereby solemnly

declare that the particulars stated for the grant of NOC to establish new feed mill/

already existing feed mills for manufacturing and marketing of Animal Compound Feed

/Customer Formula Feed/ production of Hay and Silage are correct to the best of my

knowledge and belief. I,___________________ do hereby solemnly affirm and declare

that I fully understand and accept the conditions contained in the Punjab Animals Feed

Stuff and Compound Feed Act 2016 and undertake already existing feed mills/ to

establish and construct new animal compound feed mill strictly in accordance with the

said conditions. I also undertake that I have paid the due fee for NOC in the designated

account of the government exchequer and original receipt of the bank bearing

No.___________ is enclosed herewith.

Signature:__________________________

Name:____________________________

Address:__________________________

_________________________________

Phone No:_________________________

Date:_____________________________

Witnesses duly attested by Notary Public

Address

7

1.______________________________

2.______________________________

SCHEDULE-II (Under Section-4 of the Act)

GOVERNMENT OF THE PUNJABLIVESTOCK & DAIRY DEVELOPMENT DEPARTMENT

Seal. Director Livestock of _____________Division

NOC No._________________

It is to certify that Mr.__________________________________________

S/O, W/O, D/O _______________________________________________ proprietor of

______________________________________________________________________

has been duly authorized for manufacturing of Hay and Silage, preparation and

marketing of Animals Compound Feed / Customer Formula Feed on conditions as

required under the provision of Section 4 of the Punjab Animals Feed Stuff and

Compound Feed Act 2016.

This NOC is valid upto ____________________________ date of issue.

Issued at___________________________

AUTHORIZED OFFICER

8

SCHEDULE-III (Under Section 4 of the Act)

APPLICATION FORM FOR THE GRANT OF LICENSE UNDER THE PUNJAB ANIMALS FEED STUFF AND COMPOUND FEED ACT 2016

PART – A

1- Name of Manufacturing Hay ,Silage ____________________________ and Compound Feed Mill _____________________________

2- Manufacturing Location of _______________________________Hay ,Silage and Compound Feed Mill _______________________________

3- Month/Year of Establishment _____________________________

4. Registered Trade Mark, if any _____________________________

5- Mailing Address _____________________________

6- Telephone Number

- Office _____________________________- Mill _____________________________

7- NTN Number _____________________________

8- E-mail/ Website _____________________________

9- Name of the Owner & Nationality _____________________________

10- Mailing Address of the Owner _____________________________

11- Telephone No. of the Owner.

- Office. _____________________________- Residence. _____________________________

12- Facilities Established.

(a) Building constructed give details _____________________________(attach details)

(b) Machinery/Equipment _____________________________(attach details)

9

(c) Laboratory Facilities for _____________________________Chemical Analysis (Attach details)

(d) Experimental facilities for _____________________________biological trials (Attach details)(e) Copy of Approved Site Plan By ____________________________

Competent Authority (f) Any other facility establishment _____________________________

13- Capacity of the Mill to manufacture Compound Feed/Customer Formula Feed for Animals (Metric Ton per hour )

14- Appointment of professional graduate ______________________________technical staff to formulate/manufacture Animal Compound Feed (attach list giving names, qualifications etc.)

15- Any other relevant information ______________________________

Date.____________________

Signature of the ApplicantTitle of the Firm, Address

10

11

( PART – B )

A F F I D A V I T

I,______________________________S/O,W/O,D/O ______________________

of M/S _____________________________________________ do hereby solemnly

declare that the particulars stated for the grant of license to manufacturing Animal

Compound Feed /Customer Formula Feed / Hay /Hay / Silage for animals are correct

to the best of my knowledge and belief. I,___________________ do hereby solemnly

affirm and declare that I fully understand and accept the conditions contained in the

Punjab Animals Feed Stuff and Compound Feed Act 2016 and undertake to

manufacture and market animal compound feed / Customer Formula / Production of

Hay / Production of Silage mill strictly in accordance with the said conditions. I also

undertake that I have paid the due fee for license in the designated account of the

government exchequer and original receipt of the bank bearing No.___________ is

enclosed herewith.

Signature:__________________________

Name:____________________________

Address:__________________________

_________________________________

_________________________________

Phone No:_________________________

Date:_____________________________

Witnesses duly attested by Notary Public

Address

1.______________________________

2.______________________________

12

SCHEDULE-IV (Under Section-4 of the Act)

GOVERNMENT OF THE PUNJABLIVESTOCK & DAIRY DEVELOPMENT DEPARTMENT

Seal. Director Livestock of _____________Division

License Registration No._________________

It is to certify that Mr.__________________________________________

S/O, W/O, D/O _______________________________________________ proprietor of

______________________________________________________________________

has been duly authorized to manufacture and market Animals Compound Feed /

Customer Formula Feed / Feed Stuff for having fulfilled the requisite conditions and

qualifications as required under the provision of Section 4 of the Punjab Animals Feed

Stuff and Compound Feed Act 2016.

Provided further that the Animals Compound Feed / Customer Formula

Feed manufactured / Feed Stuff under authority of this license shall be available for sale

in the Punjab Province.

This license is valid upto ____________________________

Issued at_________________________________________

LICENSING AUTHORITY/AUTHORIZED OFFICER

13

SCHEDULE-V (Under Section-3 of the Act)

STANDARDS OF PROXIMATE ANALYSIS AND AFLATOXIN B1 OF DIFFERENT FEED STUFFS

a. NUTRIENTS LEVELS OF CEREALS / COARSE GRAINS FOR LIVESTOCK

Ingredients/ Feedstuffs

Moisture% (Max.)

Crude Protein

% (Min.)

Crude Fat % (Min.)

Crude Fiber

% (Max.)

Total Ash % (Max.)

Aflatoxin B1 (PPb) (Max.)

Maize 13 8 3 4 2.5 50

Rice Broken 12.5 7 1 4 2 20

Sorghum 12 9 2 4 2.7 20

Wheat 12.5 10 1 5 2.5 20

Barley 12.5 8 2 10 3.5 20

Millet 12.5 8 3 3 3.5 20

14

b- Nutrients levels of vegetable protein source

Ingredients/ Feedstuffs

Moisture% (Max.)

Crude Protein

% (Min.)

Crude Fat % (Min.)

Crude Fiber

% (Max.)

Total Ash %

(Max.)

Aflatoxin B1 (PPb) (Max.)

Cotton Seed Meal 10 35 1 13 6 200

Cotton Seed Cake 10 21 8 24 6 200

Cotton seed whole 10 19 15 25 6 200

Rape Seed Meal 10 32 1 13 7 20

Canola Meal 10 32 1 12 7 20

Sunflower Meal 10 22 1 24 8 200

Soybean Meal 12 42 1 8 7 20

Sesame Meal 10 35 1 8 12 20

Linseed Oil Cake 10 25 5 10 7 50

Maize Oil Cake 10 16 7 14 4 100

Maize Gluten Feed 10 20 1 9 8 100

Maize Gluten Meal 10 52 1 1 3 100

Rice Polishing 12 10 13 12 10 50

Rice Protein Meal 10 30 2 2.5 3.5 20

Wheat Bran 12 12 4 11 7.5 20

Rice Bran Meal 12 12 0.2 14 12 50

Matri 10 22 1.8 8 3.5 20

Guar Meal 10 38 4.5 12 7 50

Pulses Meal 10 18 2.5 20 8 50

Wheat middling 10 14 3.5 10 6 20Roti Tukra/ Bakery/Confectionary By-products

12 -- -- -- -- 200

c. Nutrient Levels of Animal Protein Sources.

15

Ingredients/ Feedstuffs Moisture% (Max.)

Crude Protein %

(Min.)

Crude Fat % (Min.)

Crude Fiber % (Max.)

Total Ash % (Max.)

Fish Meal 10 44 5 1.5 26

Blood Meal 10 60 15 3 6.2

Meat Meal 6 41 7 3.5 22

Poultry by Product Meal 10 45 10 1 8

d. Nutrient Levels of Industrial and Agricultural Products and By Products

Ingredients/ Feedstuffs

Moisture% (Max.)

Crude Protein

% (Min.)

Crude Fat % (Min.)

Crude Fiber % (Max.)

Total Ash % (Max.)

Molasses 26 1 - - 12

Vegetable Oil 0.1 0

99.9FFA = Max 3%Peroxide Value

= Max 10 meq/kg

- -

e. Nutrients Levels Of Mineral Sources

Ingredients Calcium % (Min.)

Phosphorus (Available) %

(Min.)

Total Ash % (Max.)

Dicalcium Phosphate 22 17.5 90

MDCP 24 20 90

Monocalcium Phosphate 15 20.5 90

Limestone 35 - 90

Marble powder 35 - 90

Bone meal 18 7 60

Bone Ash 30 15 99

16

SCHEDULE-VI (Under Section 2 of the Act)

STANDARDS OF PROXIMATE ANALYSIS OF DIFFERENT COMPOUND FEED/CUSTOMER FORMULA FEED

a. Nutrient Specifications of Compound Feed for Poultry

Class of Poultry Moisture% (Max.)

Crude Protein

%

Crude Fat % (Min.)

Crude Fiber %

Total Ash %

(Max.)

ME Kcal / Kg

Aflatoxin B1 (PPb) (Max.)

Chick Starter 12 17-20 2 3.0-5.5 9 2600-2800 50

Grower / Prelayer 12 14-17 2 3.0-7.0 9 2600-

2800 50

Layer Feed 12 15-17 2 3.0-5.5 13 2600-2800 50

Broiler Starter 12 18-22 2 3.0-6.0 9 2700-2900 50

Broiler Finisher 12 17-20 2 3.0-6.0 9 2700-3000 50

Broiler Breeder Starter 12 17-20 2 3.0-6.0 9 2700-

2900 50

Broiler Breeder Grower 12 14-16 2 3.0-7.0 9 2700-

2900 50

Broiler Breeder Prelayer 12 15-17 2 3.0-6.0 10 2700-

2900 50

Broiler Breeder Layer 12 15-17 2 3.0-6.0 13 2700-

2900 50

Layer Breeder Starter 12 17-20 2 3.0-6.0 9 2700-

2900 50

Layer Breeder Grower

12 15-17 2 3.0-6.0 9 2700-3000 50

Layer Breeder Layer

12 14-16 2 3.0-6.0 13 2700-3000 50

GP Breeder Starter 12 17-19 2 3.0-6.0 9 2700-

2900 50

GP Breeder Grower 12 14-16 2 3.0-7.0 9 2700-

3000 50

GP Breeder Layer

12 15-17 2 3.0-6.0 13 2700-2900 50

Broiler Breeder Male

12 13-16 2 3.0-7.0 9 2700-2900 50

Layer Breeder Male

12 13-16 2 3.0-7.0 9 2700-2900 50

GP Breeder Male

12 13-16 2 3.0-7.0 9 2700-2900 50

Quails 12 20-26 2 3.0-6.0 9 2700-3000 50

17

c. The nutrient specification of compound feed for Livestock

Sr# Type of Feed DM% (Max.)

Crude Protein % (Min)

Total Ash % (Max.)

1 Calf Starter 88 18 10

2 Heifer Feed 88 14 12

3 Dairy Feed Low producer (less than 10 litre) 88 14 12

4 Dairy Feed medium producer (less than 20 litre) 88 16 12

5 Dairy Feed High producer (more than 20 litre) 88 18 12

6 Fattening Feed 88 14 12

7 Breeding Feed 88 16 10

8 Sheep or Goat Feed 88 15 10

9 TMR 88 10 10

Notes1- AFB1 levels should not be greater than 50 and 200 ppb in dairy and fattening feeds

respectively.2- Urea in dairy feed should not be greater than 1.5%. Urea shall not be added in calf

starter. 3- The use of ingredients from animal sources is prohibited in livestock feed.4- The use of adulterated, highly fungal contaminated, spurious/fabricated, highly

damaged raw material shall not be allowed.

18

Parameters of manufacturing unit of feed stuffs and compound feed A person shall not be granted a license for the manufacture of compound feed/ Customer Feed Formula/Hay/silage/Meals/Cakes/TMR unless:

a) He/she has an automatic or semi automatic feed plantb) He/she has a laboratory of the standard prescribed by the Government having facilities to carry out proximate analysis and mycotoxin estimation of compound feed or customer formula feed and the feed stuffs used for manufacture of the same in accordance with standards of proximate analysis as mentioned in schedule V and VI or the sample may be get analyzed from a public/private laboratory having prescribed facilities as mentioned below in section 4 of this document.c) He has experimental facilities for livestock or other animals to conduct biological trials of compound feed or customer formula feed or feed testing system pertaining to feed performance from client farm.d) He has employed/consulted a qualified animal nutritionist;

Parameters of production, packing, transportation, and storagePacking and Marking: The compound feed or customer formula feed shall be packed in sound and lean packing made of jute or cotton or polypropylene or any other suitable material.

Each bag containing compound feed or customer formula feed shall have the following particulars legibly printed thereon:

(a) name and address of manufacturer; (b) license number; (c) type of compound feed or customer formula feed, date of manufacture and batch

number; (d) net weight of the bag.

In addition to the above, the licensee shall attach with the bag of compound feed or customer formula feed a printed tag bearing information regarding following nutrients and additives:

a) minimum guaranteed percentage of crude protein;d) maximum percentage of crude ash;e) minimum guaranteed batch or code number; andf) date of manufacture.

Feed testing laboratoryGovernment may approve analytical laboratories in public sector under section 10 of the Ordinance if a laboratory has the following facilities:

(a) has a distinct building and infrastructure;(b) has employed qualified animal nutritionist or chemist holding at least

graduate degree in the discipline; (c) has the requisite support staff; (d) has facility for proximate analysis including moisture %, crude protein %,

crude fat %, crude fiber % and total ash % and quantitative aflatoxin determination; and

(e) such other facilities as the Government may specify.

Parameters of green fodder crops (roughages).

(I).The crops used for Green fodder should be indigenous

i.e. Rabi or winter season crops, Oats, Lucerne (Alfalfa), Berseem, Ryegrass.

Kharif or summer season crops, Maize, Sorghum, Bajra, Goar, Cowpeas and Mott grass.

(II). Fodder crops used as green fodder should be harvested at panicle, head initiation and pod

formation stages.

19

(III).NPK (Sodium, Phosphorus and potassium elements should be used as

recommended by Agriculture Department for each and every fodder crops as

nutrient.

Parameters of silageWhile preparing silage from a crop the following parameters should be considered.

Milk line in grain = 1/2Dry matter in plant = 28-38%Moisture contents in plants = 62-72%Crude protein = not less than 6%pH = not more than 4.3ADF (Acid Detergent Fiber) = not more than 30%NDF (Neutral Detergent Fiber) = not more than 50%Lactic Acid = 3.5-4.5 %Soluble carbohydrates = 3.8-5%Fat = 3-5%Ash/ Total Minerals =16-20%Ether Extract =<5%Starch = not less than 20%Physical Appearance (colour) = Light green to brownish greenTexture/particle size =2-2.5 cmAroma = pleasant & vinegar smellBale size = 60 kg , 350 kg& one ton. It should be clearly indicated = Date of production, Name of the crop, name of the firm,

name of the additives if added should be labeled.Shelf life = one year.Fodder Crops suitable for silage = Corn, Sadabahar, Sorghum, Bajra, Mott grass & Oats.

PARAMETERS FOR MANUFACTURING UNITS, PRODUCTION, PACKING, TRANSPORTATION AND STORAGE OF SILAGE

For these parameters followings are the basic requirements.

Power (Tractors), combine harvester/ Forage harvester cum Chopper, Hydraulic dumper,

Bunkers / Bailers, Wrapper, manpower, UV sheet (20µ), jute thread for small bails and inner net

for large bails, well drained ground with four wall for storage, land & fork lifter etc.

PARAMETERS OF HAYWhile preparing hay from a crop the following parameters should be considered.

Crop should be harvested = at panicle, head initiation, and pod formation stages.Dry matter in plant = 85-88%Moisture contents in plants = 12-15%Crude protein =depending upon crop or material ADF (Acid Detergent Fiber) = 31-45 %NDF (Neutral Detergent Fiber) = 40-65%Ash/ Total Minerals =8-11%Physical Appearance (colour ) = Light green or greenishCutting height of the crops =3-4 inches above ground.Fodder Crops suitable for hay = Lucerne, Berseem, Ryegrass, Oats, cowpeas, Rhodes

grass, Gour & other grasses ment for hay.Bale Size =18-20 kg, 500 kg & one ton Shape of hay bale = Rectangular/square or round

20

PARAMETERS FOR MANUFACTURING UNITS, PRODUCTION, PACKING, TRANSPORTATION AND STORAGE OF HAY

For these parameters followings are the basic requirements

Power (Tractors), Mower/cutter, Raker, Hay bailer, Hydraulic dumper, Manpower, twines

(wrapping material), shade , land, bale wagon, hay hiker, fork lifter etc.

PARAMETERS OF TMR.

While preparing TMR the following parameters should be considered

A- Parameters of TMR used for in milk animals

Parameters (Dry Matters) Stage of lactation (early first 2 month)

Stage of lactation (mid from 3-6 month)

Stage of lactation (late above 6 month )

Crude protein % 17 to 18 16 to 17 15 to 16NDF % 28 to 32 33 to 35 36 to 38Dry matter % 70-80 70-80 70-80Ash/ Minerals % 10-12 10-12 10-12TDN % 65-70 60-65 60-65

B- TMR for dry animals

Parameters (Dry Matters)

Average range

Crude protein % 12-14.5NDF % 20-30Dry matter % 70-80Ash/ Minerals % 10-12TDN % 60-65

C-TMR for heifers

Parameters (Dry Matters)

0 to 6 Month. 7 to 11 Month. 12 to 24 Month.

Crude protein % 16 13 12NDF % <30 <30 <30TDN % 69 66 63Dry matter % 70-80 70-80 70-80Ash/Minerals % 10-12 10-12 10-12

D-TMR for fattening animals

21

Parameters (Dry Matters) Average range

Crude protein % 13-15NDF % <30TDN % 60-70Dry matter % 70-80Ash/Minerals % 10-12

PARAMETERS FOR MANUFACTURING UNITS, PRODUCTION, PACKING, TRANSPORTATION AND STORAGE OF TMR

For these parameters followings are the basic requirements

Power (Tractors), TMR mixer/TMR wagon, Hay/ Silage/ fodder, crop residues, additives,

industrial waste & concentrate etc.

SCHEDULE VII (Under Section-12) of the Act)

GOVERNMENT OF THE PUNJABLIVESTOCK & DAIRY DEVELOPMENT DEPARTMENT.

Declaration of Seizure

22

THE PUNJAB ANIMALS FEED STUFF AND COMPOUND FEED ACT 2016

I ______________________________ S/O, W/O, D/O __________________________

employed as ________________________________ in the ______________________

Department, hereby declare that I have ______________________________________

day of _________________ /200 At _____________________ seized the__________

at this day of _________________________________ of the following description.

h) Type of Compound Feed/Customer Formula Feed/Hay&Silage (Full description).

ii) Name of Feed Mill/ Plant to which seized article belonged.iii) License Number.iv) From whom seized (detailed description).

It is hereby declared that the seizer of above mentioned Compound Feed/ Customer Formula Feed/Hay&Silage has been made in the presence of the witnesses, whose particulars and signature are given below. The seized article has been left in the custody or control of

Or is stored

Signature__________________________Name of the Inspector____________________________

Stamp/Seal____________________________WITNESSES:1.______________________2.______________________3._______________________

Name & Signature of personunder whose custody article seized.

Address:___________________________Date______________________________

SCHEDULE VII (Under Section-16 of the Act)

GOVERNMENT OF THE PUNJABLIVESTOCK & DAIRY DEVELOPMENT DEPARTMENT

RESULT OF ANALYSIS

23

1. Name of the Person/Inspector form whomsample of Compound Feed/ Customer Formula Feed / Hay & Silage received.

2. Reference of Application through which received in laboratory.

3. Date of receipt in Laboratory .

4. Laboratory Number allotted .

5. Analysis fee received vide cash receipt No. & Date.

6. Type of Analysis requested .

7. Analysis Report. (As such Basis).

a) Proximate Analysis Requested _________________________

b) Any other test requested other _________________________than proximate analysis.

It is certified that the analysis of the sample mentioned in this report is correct and has been carried out according to the laid standards of A.O.A.C.

Signature of Chemist/Officer I/C Laboratory_________________________

Seal/Stamp.________________________________

Dated._______________________

8. Remarks/Opinion about sample.

________________________________________________________________________________________________________________

24