femap 11.4 what’s new - femap. · pdf filefemap 11.4 what’s new author:...
TRANSCRIPT
![Page 1: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/1.jpg)
FEMAP 11.4 What’s New
![Page 2: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/2.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 2 Siemens PLM Software
FEMAP Release Schedule
Regular release schedule
• v11.4 June 2017
• v11.3 May 2016
• v11.2 March 2015
• v11.1 November 2013
• v11: January 2013
• v10.3.1: January 2012
• v10.3: October 2011
• v10.2: October 2010
• v10.1.1: January 2010
• v10.1: August 2009
• v10: December 2008
![Page 3: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/3.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 3 Siemens PLM Software
FEMAP Direction
Maximize efficiency of FEA tasks
• Efficient creation of high fidelity FE models that accurately represent real-world
engineering problems
• Intuitive interpretation of analysis results to improve the design and
performance of engineered products
Build upon strong FEMAP capabilities
• Geometry idealization and processing for FE models
• Powerful meshing, model creation and interactive editing
• In-depth support for industry standard solvers
• Flexible customization tools to streamline analysis processes
![Page 4: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/4.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 4 Siemens PLM Software
FEMAP 11.4
Overview
New functionality and updates
• Visualization
• Meshing
• Preprocessing
• Performance
• Charting
• Solver support
![Page 5: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/5.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 5 Siemens PLM Software
FEMAP 11.4
Visualization
Show Entities / Autoscale
• Facilitates locating and visualizing model entities
particularly in complex models
• Can Autoscale around one or multiple entities
• Accessible in other highlight locations including:
Model Info, Data Table, and Connection Editor
![Page 6: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/6.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 6 Siemens PLM Software
FEMAP 11.4
Visualization
Draw Erase on previous selection vs. entire model
• New “Draw Mode Select from All” option
• Easier to refine entity selection for Draw Erase
Workflow:
• Select elements to draw (from entire model)
• Deselect Draw Mode Select From All
• Go back into Draw Erase element
selection – entity selection is
now based on previous selection
instead of entire model
![Page 7: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/7.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 7 Siemens PLM Software
FEMAP 11.4
Geometry Manipulation
Geometry Break at All Intersections
• Automatically splits curves at any and all intersections
![Page 8: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/8.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 8 Siemens PLM Software
FEMAP 11.4
Meshing
Meshing Toolbox: auto update of rigid elements
Completes typical shell-meshing workflow:
• Create initial mesh
• Fine tune with Meshing Toolbox
• Any rigid ‘spiders’ present will update automatically
![Page 9: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/9.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 9 Siemens PLM Software
FEMAP 11.4
Meshing
Meshing Toolbox: auto update of rigid elements
For rigid elements connected to geometry that is
being re-meshed:
• If all the nodes on a curve or surface are
associated with each rigid element, then that
element is updated to the new nodes generated
• If some nodes are left out, the intent of the rigid
element update is not clear, a warning message
is issued (example):
Potential rigid disconnect at Element 17920 and
Curve 805
It is up to the analyst to reconnect as desired
RBE remains
disconnected
![Page 10: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/10.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 10 Siemens PLM Software
FEMAP 11.4
Saved Vectors and Planes
Vectors and planes can now be saved to the model
• Vector and plane managers for creation and management
• Any vector or plane in the previous section can be saved
![Page 11: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/11.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 11 Siemens PLM Software
FEMAP 11.4
Saved Vectors and Planes
Using Saved Vectors and Planes
• Added Saved method for both vectors and planes
• Saved vectors and planes persist with the model and can be
referenced at any time
• Running list of previous vectors and planes is kept so they can
be easily referenced without having to save them
![Page 12: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/12.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 12 Siemens PLM Software
FEMAP 11.4
Function/Table Editor
Table Pane for creating and editing both functions and tables
Function Types
• Time
• Temperature
• Stress/Strain
• Frequency Dependent/Dynamics
• Thermal/Flow
• Other
Table Types
• Load Set Combination
• Result Set Processing
• Thermal/Flow Vector Table
![Page 13: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/13.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 13 Siemens PLM Software
FEMAP 11.4
Function/Table Editor
New GUI based tools in Function/Table Editor
• Copy/paste cell to cell
• Fill down, Fill right
• Series: Constant, Linear, Growth
• Adjust highlighted cells with scale + factor
• Ramp, Equation and From Data Series
![Page 14: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/14.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 14 Siemens PLM Software
FEMAP 11.4
Data Mapping
High performance data mapping
New performance algorithm for extracting data from Output Map
Data Surfaces and Model / Load / Map Output from Model (direct
model to model)
1,000x faster!
Added Data Conversion method for Source model
• From View – uses current settings in Active View
• Specified option – Average, Maximum, or Minimum (Centroid
Only or with corner data)
Ongoing development on new source options, matching Criteria
Plots and Contour Plot options
![Page 15: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/15.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 15 Siemens PLM Software
FEMAP 11.4
Data Mapping
Data mapping speed improvement
example
Source model: 1,000,000 elements
with nodal data distribution
Mapping times
• V11.3.2 > 5 hours
• V11.4 < 1 minute
![Page 16: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/16.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 16 Siemens PLM Software
FEMAP 11.4
Charting
Chart Data Series dialog redesigned to show only the most
relevant information
• Use Type drop-down to select type of data series
• Data tab dependent on option selected in Type drop-down
• Style tab consistent for all data series types
• Clutter is reduced and options are easier to find
![Page 17: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/17.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 17 Siemens PLM Software
FEMAP 11.4
Charting
Simultaneous plotting of real and complex data
• Dual plots can simultaneously show real / imaginary
or magnitude / phase data
• Expansion is done automatically; no additional
complex data series need to be specified
New chart data series type – Complex Expansion
• Magnitude / phase data is expanded
at user-defined interval
![Page 18: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/18.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 18 Siemens PLM Software
FEMAP 11.4
Charting
Real-time output processing
• Processing is done on-the-fly by the charting
pane – manual processing is no longer required
• Transform
• Nodal / elemental data conversion
• Complex phase synchronization
![Page 19: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/19.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 19 Siemens PLM Software
FEMAP 11.4
Nastran Solver Support
Nastran enhancements
• Param, POST, -2: reads nodal output in the basic coordinate system
• Strain Curvature output support
• Performance enhancements for reading large Nastran input files with many
DMIG entries
• Read, keep and cycle CELAS1 entries in lieu of auto-converting to CELAS2
entries
• ZTOL entry support for Nastran radiation analysis
![Page 20: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/20.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 20 Siemens PLM Software
FEMAP 11.4
Solid Centerline Finder
Solid centerline finder – available via API only
• feSolidExtractCenterlines
• Pass in one or more solids
In this example: one single solid
![Page 21: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/21.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 21 Siemens PLM Software
FEMAP 11.4
Solid Centerline Finder
FEMAP extracts centerlines/arcs
Assigns property/material
For solid tubes – FEMAP circular bar property
is created
For hollow tubes – FEMAP circular tubes are
created
Within a single call to command, properties
are reused if they match
![Page 22: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/22.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 22 Siemens PLM Software
FEMAP 11.4
Solid Centerline Finder
Non-circular cross sections
• Lines/arcs created at neutral axis of section
• Property is assigned to each curve,
including reference point and orientation so
they are fully ready to be meshed
• No attempt to consolidate, each curve
assigned a new property
![Page 23: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/23.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 23 Siemens PLM Software
FEMAP 11.4
Solid Centerline Finder
For tubular models, individual or
connected components are handled
in a similar manner
Model 1 – 69 solids
Model 2 – 1 solid
![Page 24: FEMAP 11.4 What’s New - femap. · PDF fileFEMAP 11.4 What’s New Author: Robertson, Alastair (DF PL ME MK) Keywords: C_Unrestricted Created Date: 7/24/2017 8:23:34 AM](https://reader031.vdocument.in/reader031/viewer/2022030404/5a79ea557f8b9ab05f8da234/html5/thumbnails/24.jpg)
Unrestricted © Siemens AG 2017
2017.06.01Page 24 Siemens PLM Software
FEMAP 11.4
Solid Centerline Finder
Current limitations
• For non-circular cross section, algorithm creates
the cross section based on the longest curve on
the solid
• For any straight or circular beam-like section,
works great
• For multiple curvature ones, it does not