fiber optical cable brochure-qianxin
TRANSCRIPT
Qianxin High Technology Group
Fiber Optical Cable Products Brochure
P2
INDEX
Communication Cable
Outdoor Optical Communication Cable
Stranded Optical Cable
Central Tube Optical Cable
Optical Fiber Ribbon Cable
Power Optical Cable
Self-supporting Aerial Optical Cable
Bow-type Cable
Other Specialty Cables
Indoor Optical Communication Cable
P3
GYTS Non Self-supporting Aerial/Duct Cable
Technical Characteristics
• Fiber count: 2〜288
• Low loss, low dispersion
• Proper design and precise excess length control offer excellent
mechanical and environmental properties to cable.
• Corrugated steel tape armor ensures nice moisture proof and side
pressure resisting
• Small size, light weight, easy to install.
• The sheath can be made of LSZH material. (The model turns to
GYTZS in the case.)
Performance
• Applicable to long distance, inter-exchange communication, CATV, computer network transmission system,
etc.
• Minimum bend radius:Static 10D,dynamic 20D.
• Operation temperature: "40〜+70*0.
Loose tube
Optical fiber
Fiber gel
Cable gel
Central strength member-steel wire
Filled cord
Steel plastic tape
PE sheath
Structural Diagram
P4
GYTA Non Self-supporting Aerial/Duct Cable
Technical Characteristics
• Fiber count: 2〜288
• Low loss, low dispersion
• Proper design and precise excess length control offer excellent mechanical
and environmental properties to cable.
• Water-blocking cable gel is fully filled outside the strength member and
inside the cable core, which ensures the cable's moisture proof and water barrier
performance.
• The longitudinal wrap of aluminum tape enhances cable's moisture proof
performance and ensures cable's flexibility and anti-bending capability.
• The sheath can be made of LSZH material. (The model turns to GYTZA in the
case.)
Performance
• Applicable to long distance, inter-exchange communication,CATV, computer network transmission system, etc.
• Minimum bend radius:Static 10D,dynamic 20D.
• Operation temperature:-40 〜+70°C.
•
Loose tube
Optical fiber
Fiber gel
Central strength member-streel wire
Filled cord
Steel-plastic tape
PE sheath
Structural Diagram
P5
GYTY53 Non Self-supporting Aerial/Direct Burial Cable
• Fiber count: 2〜288
• Low loss, low dispersion
• Proper design and precise excess length control offer excellent
mechanical and environmental properties to cable.
• Double sheath enhances the cable's side pressure resistance and
moisture proof property.
• Small size, light weight, easy to install.
• The sheath can be made of LSZH material. (The model turns to
GYTZY53 in the case.)
Performance
• Applicable to long distance, inter-exchange communication,CATV, computer network transmission system,
etc.
• Minimum bend radius:Static 12.5D, dynamic 25D.
• Operation temperature:-40 〜 +70°C.
Fiber gel Loose tube Optical fiber Central strength member-steel wire Filling cord Cable gel PE inner sheath Cable gel Steel-plastic tape PE outer sheath
Structural Diagram
P6
GYTA53 Direct Burial Cable
Technical Characteristics
• Fiber count: 2〜288
• Low loss, low dispersion
• Proper design and precise excess length control offer excellent
mechanical and environmental properties to cable.
• Double sheath enhances the cable's side pressure resistance and
moisture proof property.
• Small size, light weight, easy to install.
• The sheath can be made of LSZH material. (The model turns to
GYTZA53 in the case.)
Performance
• Applicable to long distance, inter-exchange communication,CATV, computer network transmission system,
etc
• Minimum bend radius:Static 12.5D, dynamic 25D.
• Operation temperature:-40〜+70°C.
Fiber gel
Loose tube
UV fiber
Cable core filling
Central strength member
Binding yarn and cable core filling
PE inner sheath
Water-blocking layer Steel wire armor
Armor
Aluminum-plastic laminated tape
PE outer sheath
Structural Diagram
P7
GYTA53+33 Underwater Cable
Technical Characteristics
• Fiber count: 2〜144
• Low loss, low dispersion
• Proper design and precise excess length control offer excellent
mechanical and environmental properties to cable.
• Steel wire armor strengthens cable's side pressure and tensile
resisting property.
• Steel-aluminum llaminated tape has nice moisture proof property.
Performance
• Applicable to underwater or other occasions with high demands on radial pressure or tensile strength.
• Minimum bend radius:Static 15D,dynamic 30D.
• Operation temperature:-40 ~ +70°C.
PE inner sheath
Steel tape armor
Fiber gel
Loose tube
UV fiber
Cable core filling
Central strength member
Binding yarn and cable core filling
PE inner sheath
Water-blocking layer
Steel wire armor
Aluminum-plastic laminated tape
PE outer sheath
Structural Diagram
P8
GYXTA Aerial, Duct, Direct Burial or Underwater Cable
Technical Characteristics
• Fiber count: 2〜96
• Low loss, low dispersion
• Proper design and precise excess length control offer excellent
mechanical and environmental properties to cable.
• Steel wire armor and aluminum-plastic llaminated tape make the
cable have nice anti-bending and side pressure resisting capability, and
prevent it from gun shot and rodent
• Small size, light weight, easy to install.
• The sheath can be made of LSZH material. (The model turns to
GYXTZA in the case.)
Performance
• Applicable to inter-exchange communication, rural telephone, local junction, CATV, computer network
transmission system, etc.
• Minimum bend radius:Static 10D,dynamic 20D.
• Operation temperature:-40 ~ +70°C.
Steel wire armor
Optical fiber
Fiber gel
Loose tube
Aluminum-plastic laminated tape
Water-blocking cable gel
PE sheath
Structural Diagram
P9
GYXTS Central Tube Direct Burial/Underwater Cable
Technical Characteristics
• Fiber count: 2〜96
• Low loss, low dispersion
• Proper design and precise excess length control offer excellent
mechanical and environmental properties to cable.
• Steel wire armor and steel tape armor enhance the cable's
anti-bending and side pressure resisting capability, and prevent it from
gun shot and rodent.
• Small size, light weight, easy to install.
• The sheath can be made of LSZH material. (The model turns to
GYXTZ5 in the case.)
Performance
• Applicable to Inter-exchange communication, rural telephone, local junction, CATV, computer network
transmission system, etc.
• Minimum bend radius:Static 10D,dynamic 20D.
Operation temperature:-40 ~ +70°C.
Steel wire armor
Optical fiber
Fiber gel
Loose tube
Steel-plastic laminated tape
Water-blocking cable gel
PE sheath
Structural Diagram
P10
GYXTW Central Tube Aerial/Duct/Direct Burial Cable
Technical Characteristics
• Fiber count: 2〜96
• Low loss, low dispersion
• Proper design and precise excess length control offer excellent
mechanical and environmental properties to cable.
• Steel wire armor strengthens the cable's side pressure resistance
and moisture proof performance.
• Small size, light weight, easy to install.
• The sheath can be made of LSZH material. (The model turns to
GYXTZW in the case.)
Performance
Applicable to inter-exchange communication, rural telephone, local junction, CATV, computer network
transmission system, etc. Minimum bend radius:Static 10D, dynamic 20D.
Operation temperature:-40 ~ +70°C.
Loose tube
Optical fiber
Fiber gel
Steel wire Water-blocking cable gel
Steel-plastic laminated tape
PE sheath
Structural Diagram
P11
GYXTW53 Central Tube Direct Burial Cable
Technical Characteristics
• Fiber count: 2〜96
• Low loss, low dispersion, superior optical transmission attribute
• Proper design and precise excess length control offer excellent
mechanical and environmental properties to cable.
• Double steel tape armor enhances the cable's side pressure
resistance and rodent-proof property.
Performance
• Applicable to inter-exchange communication, rural telephone, local junction, CATV, computer network
transmission system, etc.
• Minimum bend radius:Static 12.5D, dynamic 25D.
• Operation temperature:-40 ~ +70°C.
Water-blocking cable gel
PE sheath
Fiber gel
Loose tube
Optical fiber
Steel wire strength member
Steel-plastic laminated tape
Water-blocking cable gel
Steel plastic laminated tape
PE outer sheath
Structural Diagram
P12
GYFXTF Central Tube Indoor/Outdoor Cable
Technical Characteristics
• Fiber count: 2〜96
• Low loss, low dispersion, superior optical transmission attribute.
• Proper design and precise excess length control offer excellent
mechanical and environmental properties to cable.
• Non-metallic FRP reduces cable weight except securing its tensile
strength.
• Compact construction, light weight, easy to install.
Performance
• Applicable to inter-exchange communication, rural telephone, local junction, CATV, computer network
transmission system, etc.
• Minimum bend radius:Static 10D,dynamic 20D.
• Operation temperature:-40 ~ +70°C.
Optical fiber
Fiber gel
Loose tube
FRP
PE sheath
Structural Diagram
P13
GYDTA Aerial/Duct Ribbon Cable
Technical Characteristics
• Fiber count:4〜576
• Low loss, low dispersion
• Proper design and precise excess length control offer excellent
mechanical and environmental properties to cable.
• Aluminum-plastic laminated sheath provides the cable with nice
moisture-proof property.
• Small size, light weight, easy to install; high fiber density for
collective splicing and engineering cost saving.
• The sheath can be made of LSZH material. (The model turns to
GYDTZA in the case.)
Performance
• Applicable to inter-exchange communication, outdoor feeder or distribution wire for access network, etc.
• Minimum bend radius:Static 10D,dynamic 20D.
• Operation temperature:-40 ~ +70°C.
•
Loose tube
Fiber ribbon
Fiber gel
Filled cord
Central strength member-steel wire
Waterblocking tape
Aluminum-plastic laminated tape
PE sheath
Structural Diagram
P14
GYDXTW Central Tube Non Self-supporting Aerial/Duct
Cable
Technical Characteristics
Fiber count: 4〜288 Low loss, low dispersion
Proper design and precise excess length control offer excellent
mechanical and environmental properties to cable.
Corrugated steel tape armor strengthens the side pressure resistance
and moisture-proof property of cable.
Small size, light weight, easy to install; high fiber density for collective
splicing and engineering cost saving.
Performance
Applicable to inter-exchange communication, outdoor feeder and distribution wire for access network, etc.
Minimum bend radius:Static 10D, dynamic 20D.
Operation temperature:-40 ~ +70°C.
Steel-plastic tape
Loose tube
Fiber ribbon
Steel wire
Fiber gel
Water-blocking gel or tape
PE sheath
Structural Diagram
P15
All-dielectric Self-supporting (ADSS) Cable
Technical Characteristics
• Fiber count: 2〜144.
• Low loss, low dispersion.
• Proper design, precise excess length control and cabling process
offer excellent mechanical and environmental properties to cable.
• Non-metallic construction design gives cable strong resisting
capability against electromagnetic interference.
• High-strength aramid yarn as strength member offers very high
tensile strength, small diameter and light weight to fit different climate
conditions and laying spans.
• Special anti-tracking (AT) outer sheath (optional) makes cable
have strong electro-erosion resistance capability.
Performance
• Typically used in areas with high electrical field strength or frequent lightning in the power communication
transmission system.
• The technical parameters are subject to different fiber counts, climate conditions (e.g. temperature, wind
speed, ice coat thickness), laying spans, voltage classes of power lines, etc.
Optical fiber
Fiber gel
Loose tube
Non-metallic strength member
Binding yarn and cable filler
Inner sheath
Aramid yarn
PE sheath
Structural Diagram
P16
GYTC8A Self-supporting Aerial Cable
Technical Characteristics
Fiber count: 2〜288 Low loss, low dispersion Proper design, precise
excess length control and cabling process offers cable superior
mechanical and environmental property. Aluminum-plastic laminated
sheath offers nice humid proof property. Compact construction, light
weight, self-supporting installation.
Performance
Applicable to long distance communication, inter-exchange communication, CATV, computer network
transmission system, etc. Minimum bend radius:Static 10Df dynamic 20D.
Operation temperature:-40 ~ +70°C.
Messenger wire
Connecting part
Loose tube
Optical fiber
Fiber gel
Cable gel Central strength member
Filled cord Aluminum-plastic laminated tape
PE inner sheath
Structural Diagram
P17
GYTC8S Self-supporting Aerial Cable
Technical Characteristics
• Fiber count: 2〜288.
• Low loss, low dispersion.
• Proper design, precise excess length control and cabling process
offers cable superior mechanical and environmental property.
• Corrugated steel tape armor brings better humidity proof
performance and side pressure resistance.
• Compact construction, light weight self-supporting installation
Performance
• Applicable to long distance communication, inter-exchange communication, CATV, computer network
transmission system, etc.
• Minimum bend radius:Static 10D,dynamic 20D.
• Operation temperature:-40 ~ +70°C.
Messenger wire
Connecting part
Loose tube
Optical fiber
Fiber gel
Steel wire Water-blocking layer
Steel-plastic laminated tape
PE sheath
Structural Diagram
P18
GYFXTC8Y Self-supporting Aerial Cable
Technical Characteristics
• Fiber count: 2〜96.
• Low loss, low dispersion.
• Proper design and precise excess length control offer excellent
mechanical and environmental properties to cable.
• Small size, light weight,self-supporting.
Performance
• Applicable to access system, FTTH, CATV, computer network transmission system, etc.
• Minimum bend radius:Static 10D,dynamic 20D.
• Operation temperature:-*! 0 〜+70^.
Messenger wire
Connecting part
Loose tube
Fiber gel
Optical fiber
Aramid yarn
Sheath
Structural Diagram
P19
GJYX(F)CH Self-supporting Bow-type Drop
Cable
Structural Diagram
Technical Characteristics
• Small size, light weight, compact construction, easy to strip without tool for its special groove design, easy to
install.
• Excellent tensile strength, able to endure the overhead installation in a span of 50 meters.
• Optical fiber(s) is placed between two strength members, with excellent crush and tensile resistance.
• Excellent anti-bending property when G.657 bending insensitive fiber is applied.
• Used as drop cable from outdoor to indoor in access network or user premise network.
• Flame retardant LSZH jacket for indoor use.
Performance
Fiber Count
Cable Size (mm)
Cable Weight (kg/km) Tensile Load(N) Crush Load (N/100mm)
Temperature Range (°C) Non-metallic
strength
member
Metallic
strength
member
Long-term Long-term Long-term Long-term
1 5.1X2.0 18 21 300 600 1000 2200
2 5.1X2.0 18 21 300 600 1000 2200 -40 〜+60
4 5.1X2.0 18 21 300 600 1000 2200
Note 1. Minimum bend radius:for B6 fiber, 10H under dynamic bending and 5H under static bending. (H is the minor axis height of flat cable.)
2. All the data in the table are for reference and subject to change without notification.
Self-supporting strength member
Jacket
Strength member Colored coated
fiber
P20
GJYXFH03(Pipeline Bow-type Drop Cable)
Structural Diagram
• Good mechanical and environmental performance.
• Small size, light weight, compact construction.
• Flame retardance meets relevant standards.
• Mechanical property of Jacket meets relevant standards.
• Optical fiber(s) is placed between two strength members, with excellent crush and tensile resistance.
• Excellent anti-bending property when G.657 bending insensitive fiber is applied.
• Applicable for drop cable in pipeline or overhead to building.
Performance
Fiber Count
Cable Size
(mm)
Cable
Weight
(kg/km)
Tensile Load(N) Crush Load (N/100mm) Temperature Range(°C)
Long-term Short-term Long-term Short-term
1-4 6.3 33 300 600 1000 2200 -40 〜+60
Note 1. Minimum bend radius:for B6 fiber, 10D under dynamic bending and 5D under static bending. (D is overall diameter of round
cable.)
2. All the data in the table are for reference and subject to change without notification.
Common bow-type cable
Strength member
Water blocking tape Outer
Jacket
P21
GJYXFHA (Pipeline Bow-type Drop Cable)
Structural Diagram
Technical Characteristics
• Good mechanical and environmental performance.
• Small size, light weight, compact construction.
• Flame retardance meets relevant standards.
• Mechanical property of Jacket meets relevant standards.
• Optical fiber(s) is placed between two strength members, with excellent crush and tensile resistance.
• Excellent anti-bending property when G.657 bending insensitive fiber is applied.
• Applicable for building leading-in cable in pipeline or overhead.
Performance
Note 1. Minimum bend radiust:for B6 fiber, 10D under dynamic condition and 5D under static condition). (D is overall diameter of round cable)
2. All the data in the table are for reference and subject to change without notification.
Fiber Count
Cable Size (mm)
Cable Weight (kg/km)
Tensile Load (N)
Crush Load (N/100mm) Temperature Range (°C)
Long-term Short-term Long-term Short-term
1-4 7.0 44 300 600 1000 2200 -40 〜+60
Aluminum tape Common
bow-type cable
Strength member
Water-blocking tape
Outer jacket
P22
GYFTY Non-metallic Non Self-supporting Aerial/Duct
Cable
Technical Characteristics
• Fiber count: 2〜288
• Low loss, low dispersion
• Proper design, precise excess length control and cabling process
offer superior mechanical and environmental properties to cable.
• Have strong electromagnetic interference resistance capability.
• Small size, light weight easy to install
• The sheath can be made of LSZH material (The model turns to
GYFTZY in the case.)
Performance
• Applicable to communications in areas with strong electromagnetic field or heavy lightning damages.
• Minimum bend radius: Static 10D, dynamic 20D.
• Operation temperature:-40 ~ +70°C.
Loose tube Optical fiber Fiber gel
Filled cord
FRP
Cable gel
Water-blocking tape
PE sheath
Structural Diagram
P23
Zero Halogen Flame Retardant Cable
Technical Characteristics
• Fiber count: 2〜288
• Low loss, low dispersion
• Proper design, precise excess length control and cabling process
offer superior mechanical and environmental properties to cable.
• Superior flame retardance, non-toxic and pollution free.
Performance
• Applicable to transmission equipments and communication network in places with LSZH requirements
• Minimum bend radius: Static 12.5D,dynamic 25D.
• Operation temperature:-40 ~ +70°C.
Binding yarn & cable core filler
Optical fiber
Fiber gel
Loose tube
Central strength member
Binding yarn & cable core filler
Aluminum-plastic laminated tape
Inner sheath
Corrugated steel tape armor LSZH material
Structural Diagram
P24
Anti-termite Cable
Technical Characteristics
• Fiber count: 2〜144 Low loss, low dispersion
• Proper design, precise excess length control and cabling process
offer superior mechanical and environmenta properties to cable.
• Nylon or other anti-termite material applied in the outermost
sheath layer, good at termite damage preventing.
•
Performance
• Applicable to places with an anti-termite requirement.
• Minimum bend radius: Static 12.5D, dynamic 25D.
• Operation temperature:-40 ~ +70°C.
PE sheath
Corrugated steel-plastic laminated tape
Binding yarn
UV curable fiber
Fiber gel PBT loose tube
Metallic central strength member
PE bedding
Water-blocking gel
Aluminum-plastic laminated tape
Water-blocking layer
PE inner sheath
Anti-termite outer sheath
Structural Diagram
P25
GYFTA53 Direct Burial Cable
Technical Characteristics
• Fiber count:2〜288
• Low loss, low dispersion
• Proper design and precise excess length control offer superior
mechanical and environmental properties to cable.
• A longitudinal wrap of double-side filmed corrugated steel tape is
bonded tightly to the PE sheath, which ensures the radial moisture
barrier and improves the side pressure resistance of cable,
• Non-metallic strength member, suitable for areas with frequent
lightning strikes.
• The sheath can be made of LSZH material. (The model turns to GYFTZA53 in the case.)
Performance
• Applicable to subway, tunnel, long-distance communication, inter-exchange communication, outdoor feeder
and distribution wire for access network, etc.
• Minimum bend radius: Static 12.5D,dynamic 25D.
• Operation temperature:-40 ~ +70°C.
Inner sheath
Loose tube
Optical fiber
Fiber gel
FRP rod
Aluminum-plastic tape
Cable gel
Filled cord
Cable gel
Steel-plastic tape
Outer sheath
Structural Diagram
P26
GYTA33 Underwater/Direct Burial Cable
Technical Characteristics
• Fiber count: 2〜144 Low loss, low dispersion
• Proper design and precise excess length control offer superior
mechanical and environmental properties to cable.
• A longitudinal wrap of double-side filmed corrugated aluminum
tape is bonded tightly to the PE sheath, which ensures the radial
moisture- proof performance of cable.
• Steel wire armor enhances cable's side pressure and tensile
resistance capability.
Performance
• Applicable to long distance, inter-exchange communication, CATV, computer network transmission system,
etc.
• Minimum bend radius:Static 12.5D,dynamic 25D.
• Operation temperature:-40 ~ +70°C.
Water-blocking layer
Loose tube
Optical fiber
Fiber gel
Central strength member-steel wire
Aluminum-plastic laminated tape
Cable gel
Filled cord
PE innersheath
Steel wire
PE outer sheath
Structural Diagram
P27
GYTA333 Underwater Cable
Technical Characteristics
• Fiber count: 2〜144
• Low loss, low dispersion
• Proper design and precise excess length control offer superior
mechanical and environmental properties to cable.
• A longitudinal wrap of double-side filmed corrugated aluminum
tape is bonded tightly to the PE sheath, which ensures the radial
moisture- proof performance of cable.
• Double steel wire armor enhances cable's side pressure and tensile
resistance capability.
Performance
• Applicable to long distance communication, inter-exchange communication, CATV, computer network
transmission system, etc.
• Minimum bend radius:Static 15D, dynamic 30D.
• Operation temperature:-40~+70°C.
Binding yarn & LAP tape
Cable core filling
Loose tube
Optical fiber Aluminum-plastic laminated inner sheath
Fiber filling Central strength member Water-blocking layer
PSP tape Secondary PE Inner sheath
Steel wire armor
PE sheath
Structural Diagram
P28
GLXTW Road Surface Trench Micro Cable
Technical Characteristics
• Fiber count: 2〜96
• Low loss, low dispersion
• Unique excess length control keeps the fiber loss low and stable,
ensuring cable's operation in complicated environment.
• Superior low/high temperature and moisture-proof property.
• Superior mechanical properties including tensile and side pressure
resistance.
Performance
• Applicable to MAN and access network communication.
• Minimum bend radius:Static 10D, dynamic 20D.
• Operation temperature:-40 ~ +70°C
Loose tube Fiber gel Optical fiber Steel wire Water-blocking gel Steel-plastic laminated tape PE sheath
Structural Diagram
P29
GPTCA63 Drain Pipe Micro Cable
Technical Characteristics
• Fiber count: 2〜96
• Low loss, low dispersion
• Unique excess length control keeps the fiber loss low and stable,
ensuring cable's operation in complicated environment
• Superior low/high temperature resistance and moisture-proof property.
• Superior mechanical properties including tensile and side pressure
resistance.
Performance
• Applicable to MAN and access network communication.
• Minimum bend radius:Static 10D,dynamic 20D.
• Operation temperature:-40 ~ +70°C.
Inner sheath
Loose tube
Optical fiber
Fiber gel
Non-metallic strength member
Aluminum-plastic laminated tape
Filled cord
Binding yarn and cable core filling
Aramid yarn
PE sheath
Structural Diagram
P30
GCYFTY Airblown Micro Cable
Technical Characteristics
• Fiber count: 2〜96
• Low loss, low dispersion
• Unique excess length control keeps the fiber loss low and stable,
ensuring cable's operation in complicated environment.
• Small cable diameter, thin optical unit wall, light weight, compact
construction.
Performance
• Applicable to MAN and access network communication, easy for capacity expansion.
• Minimum bend radius:Static 15Df dynamic 30D.
• Operation temperature:-40 ~ +70°C.
Fiber gel
Loose tube
Optical fiber
Non-metallic strength member
Binding yarn and cable core filling
PE sheath
Structural Diagram
P31
GCYFXTY Non-metallic Central Tube Airblown Micro
Cable
Technical Characteristics
• Fiber count: 2〜96
• Low loss, low dispersion
• Unique excess length control keeps the fiber loss low and stable,
ensuring cable's operation in complicated environment.
Performance
• Applicable to MAN and access network communication, easy for capacity expansion.
• Minimum bend radius:Static 10D,dynamic 20D.
• Operation temperature:-40 ~ +70°C.
Optical fiber
Fiber gel
Loose tube
Aramid yarn Water-blocking yarn
PE sheath
Structural Diagram
P32
Field Operation Cable
Technical Characteristics
• Fiber count: 1 〜6
• Low loss, low dispersion, high-strength anti-fatigue optical
fiber is applied, which ensures the reliability and service life of cable
under all severe environments.
• High-modulus aramid yarn provides enough tensile resistance
for repeated winding and use.
• SZ stranding process of tight buffered fiber in small pitches
offers big tensile strain windows to cable.
• Flame retardant and matt PU material brings good hiding and
wear-resisting performance.
Performance
• pplicable to hostile environments in the field.
• Minimum bend radius:Static 10D,dynamic 20D.
• Operation temperature:-20 ~ +70°C.
Tight buffered fiber
Non-metallic strength member
Aramid yarn
PU sheath
Structural Diagram
P33
Emergency Cable
Technical Characteristics
• Fiber count: 2〜12
• Low loss, low dispersion
• The fiber coating made by thermoplastic material acts as a barrier
providing mechanical protection to the fiber.
• Black PE or PU material in the sheath prevents sunlight aging
efficiently.
Performance
• Applicable to emergency cable line repair under the support of mechanical connectors.
• Minimum bend radius:Static 10Df dynamic 20D.
• Operation temperature:-20 - +70°C.
Tight buffered fiber
Non-metallic strength member
Aramid yarn
PU sheath
Structural Diagram
P34
GYFJZU (Field Operation Cable I)
Technical Characteristics
• Good mechanical and environmental performance.
• Good crush resistance and flexibility.
• High strength, light weight, easy to splice and install.
• Applicable for military,field, severe environment
• Applicable for temporary cabling and repeated use.
• Jacket material:TPU or other agreed ones.
• Customized design is available.
Performance
Fiber Count
Cable Size
(mm)
Cable
Weight
(kg/km)
Tensile Load (N) Crush Load (N/100mm) Temperature
Range (°C)
Long-term Short-term Long-term Short-term
2 5.2 24 500 1200 500 1500
-30 〜+60 4 5.2 26 500 1200 500 1500
6 6 31 500 1200 500 1500
Note 1. Minimum bend radius:for Bl.1,61.3, B4 single mode fiber and multi-mode fiber, 20D under dynamic bending and 10D under static
bending;for B6 fiber, 10D (dynamic) and 5D (static). (D is overall diameter of round cable)
The data of cable size and weight are calculated according to cf)0.9 tight buffered fiber.
All the data in the table are for reference and subject to change without notification.
Aramid yarn
Tight buffered fiber
Non-metallic strength member
Jacket
P35
GYFJZU (Field Operation Cable Ⅱ)
Technical Characteristics
• Good mechanical and environmental performance.
• Good crush resistance and flexibility.
• High strength, light weight, easy to splice and install, support high capacity data transmission.
• Applicable for military,field, severe environment.
• Applicable for temporary cabling and repeated use.
• Jacket material:TPU or other agreed ones.
• Customized design is available.
Performance
Fiber Count
Cable Size
(mm)
Cable
Weight
(kg/km )
Tensile Load (N) Crush Load (N/100mm) Temperature
Range (°C)
Long-term Short-term Long-term Short-term
2 7.5 37 600 1200 1000 2200
-30 〜+60 4 8.4 48 600 1200 1000 2200
6 9.5 66 600 1200 1000 2200
Note 1. Minimum bend radius:for B1.1,B1.3, B4 single mode fiber and multi-mode fiber, 20D under dynamic bending and 10D
under static bending;for B6 fiber, 10D (dynamic) and 5D (static). (D is overall diameter of round cable)
The data of cable size and weight are calculated according to 中 2.0 single-fiber cable.
All the data in the table are for reference and subject to change without notification.
Aramid yarn
Single-fiber cable
FRP
Jacket
Structural Diagram
P36
GJ(A)FJV/H/U (Simplex Round Indoor Cable)
Technical Characteristics
• Soft, flexible, easy to handle.
• Suitable for pigtail and jumper wire.
• For optical connection in optical communication machine room,optical distribu-tion frame, optical device
and machine.
• Good mechanical and environmental property.
• Excellent flame retarding and stripping performance.
• Tight buffer material can be flame retardant PVC, LSZH flame retardant polyolefin, TPU or other agreed one.
• Customized design is available.
Performance
Fiber Count
Cable Size
(mm)
Cable Weight (kg/km)
Tensile Load(N) Crush Load (N/100mm) Temperature Range
(°C) Long-term Short-term Long-term Short-term
1 1.6 2.2 40 80 100 500
1 1.8 2.7 40 80 100 500
1 2.0 3.4 60 100 100 500 -20 〜+60
1 2.4 5.1 60 100 100 500
1 2.8 6.6 80 150 100 500
1 3.0 7.1 80 150 100 500
Note *1. Minimum bend radius:for B1.1,B1.3, B4 single mode fiber and multi-mode fiber,20D under dynamic bending and 10D
under static bending;for B6 fiber, 1OD (dynamic) and 5D (static). (D is overall diameter of round cable)
2. All the data in the table are for reference are subject to change without notification
Tight buffered
Bare fiber
Coating
Aramid yarn
Jacket
Structural Diagram
P37
GJ(A)FJBV/H/U (Duplex Flat Indoor Cable)
Technical Characteristics
• Soft,flexible, easy to handle.
• For indoor cabling system.
• Applicable for pigtail fiber and jumper wire.
• Applicable for optical connection in optical communication machine room, optical distribution frame, optical
device or equipment.
• Good mechanical and environmental property.
• Excellent flame retardance and easy to strip.
• Jacket can be made of flame retardant PVQLSZH flame retardant polyolefin, TPU or other agreed material.
• Customized design is available.
Performance
Fiber Count
Cable Size
(mm)
Cable Weight (kg/km)
Tensile Load(N) Crush Load (N/100mm) Temperature Range
(°C) Long-term Short-term Long-term Short-term
2 1.6x3.3 4.5 60 120 100 500
-20 〜+60
2 1.8x37 5.5 60 120 100 500
2 2.0X4.1 7 90 150 100 500
2 2.4X4.9 10 90 150 100 500
2 2.8x57 13 120 220 100 500
2 3.0X6.1 14 120 220 100 500
Note 1. Minimum bend radius:for B1.1,B1.3,B4 single mode fiber and multi-mode fiber,20H under dynamic bending and 10H under static
bending;for B6 fiber, 10H (dynamic) and 5H (static). (H is the minor axis height of flat cable.)
2. All the data in the table are for reference and subject to change without notification.
Tight buffered Bare fiber Coating Aramid yarn Jacket
Structural Diagram
P38
GJFJV/H/U (Duplex Round Indoor Cable)
Technical Characteristics
• Soft,flexible, easy to handle.
• Suitable for pigtail fiber and jumper wire.
• Suitable for optical connection in optical communication machine room, optical distribution frame, optical
device, equipment, etc.
• Good mechanical and environmental performance.
• Excellent pressure, tensile, bending and flame resistance property.
• Anti-rodent.
• Jacket can be made of flame retardant PVC,LSZH flame retardant polyolefin,TPU or other agreed materials.
• Customized design is available.
Performance
Fiber Cable Size Count
(mm)
Cable
Weight
(kg/km)
Tensile Load(N) Crush Load (N/100mm) Temperature Range
(°C) Long-term Short-term Long-term Short-term
1 3 17 150 300 1500 4000 -20~+60
2 3.2 20 150 300 1500 4000
Note 1. Minimum bend radius:for B1.1,B1.3,B4 single mode fiber and multi-mode fiber, 20D dynamic bending and 10D under static bending; for
B6 fiber, 10D (dynamic) and 5D (static). (D is overall diameter of round cable) 2. All the data in the table are for reference and subject to change
without notification.
Metal armor
Tight buffered fiber
Non-metallic strength member
Metallic braid armor
Jacket
Structural Diagram
P39
Multi-fiber Round Indoor Armored Cable
Technical Characteristics
• Soft, flexible, easy to handle.
• Suitable for pigtail fiber and jumper wire.
• Suitable for optical connection in optical communication machine room, optical distribution frame, optical
device, equipment etc.
• Good mechanical and environmental performance.
• Excellent pressure, tensile, bending and flame resistance property.
• Anti-rodent.
• Jacket can be made of flame retardant PVC, LSZH flame retardant polyolefin,TPU or other agreed materials.
• Customized design is available.
Performance
Fiber
Count
Cable Size
(mm)
Cable Weight (kg/km)
Tensile Load(N) Crush Load (N/100mm) Temperature
Range
(°C) Long-term Short-term Long-term Short-term
4 6.5 65 300 600 1500 4000
-20 〜+60 6 6.5 65 300 600 1500 4000
8 7.5 75 350 700 1500 4000
12 8 85 400 800 1500 4000
Note 1. Minimum bend radius:for B1.1,B1.3,B4 single mode fiber and multi-mode fiber, 20D under dynamic bending and 10D under static
bending; for B6 fiber, 10D (dynamic) and 5D (static). (D is overall diameter of round cable).
2. The data of cable size and weight are calculated according to 4)0.9 tight buffered fiber.
3. All the data in the table are for reference and subject to change without notification.
Tight buffered fiber
Inner sheath
Metallic armor
Non-metallic strength member
Metallic braiding Jacket
Structural Diagram
P40
Multi-fiber Distribution Round Indoor Cable
Ⅰ
Technical Characteristics
• Good mechanical and environmental performance.
• Flame retardance meets relevant standards.
• Support high-capacity data transmission.
• Suitable for indoor horizontal cabling.
• Suitable for pigtail fiber, jumper wire, and optical connection in optical communication machine room,
optical distribution frame, optical device, equipment, etc
• Jacket can be made of flame retardant PVC, LSZH flame retardant polyolefin or other agreed materials.
• Customized design is available.
Performance
Fiber Count
Cable Size
(mm)
Cable Weight (kg/km)
Tensile Load(N) Crush Load (N/100mm) Temperature Range
(°C) Long-term Short-term Long-term Short-term
4 5.0 20 120 300 200 1000
-20〜+60 6 5.2 22 120 300 200 1000
8 5.5 26 150 350 200 1000
12 6.5 36 200 500 200 1000
Note 1. Minimum bend radius:for B1.1 ,B1.3, B4 single mode fiber and multi-mode fiber,20D under dynamic bending and 10D under static
bending;for B6 fiber, 1OD (dynamic) and 5D (static). (D is overall diameter of round cable)
2. The data of cable size and weight are calculated according to 中 0.9 tight buffered fiber.
3. All the data in the table are for reference and subject to change without notification.
Tight buffered fiber
Aramid yarn
Jacket
Structural Diagram
P41
Multi-fiber Distribution Round Indoor Cable
Ⅱ
Technical Characteristics
• Good mechanical and environmental performance.
• Flame retardance meets relevant standards.
• Support high-capacity data transmission.
• Suitable for indoor horizontal cabling.
• Suitable for pigtail fiber, jumper wire, and optical connection in optical communication machine room,
optical distribution frame, optical device, equipment, etc
• Jacket can be made of flame retardant PVC, LSZH flame retardant polyolefin or other agreed materials.
• Customized design is available.
Performance
Fiber Count
Cable Structure
(unit*core number)
Cable Size (mm)
Cable
Weight
(kg/km)
Tensile Load(N) Crush Load
(N/100mm) Temperature Range(°C)
Long -term
Short -term
Long -term
Short -term
16 4x4 13.1 132 400 1000 300 1000
-20 〜+60
24 6x4 16 192 500 1200 300 1000
36 6x6 17.5 235 550 1300 300 1000
48 6x8 18 266 600 1400 300 1000
64 8x8 20 308 650 1400 300 1000
72 6x12 21 335 700 1500 300 1000
96 8x12 23.2 478 800 1600 300 1000
Note 1. Minimum bend radius:for B1.1, B1.3, B4 single mode fiber and multi-mode fiber, 20D under dynamic bending and 10D under static
bending; for B6 fiber, 10D (dynamic) and 5D (static). (D is overall diameter of round cable)
The data of cable size and weight are calculated according to 中 0.9 tight buffered fiber.
All the data in the table are for reference and subject to change without notification.
Sub-cable unit Optional central strength member
Wrapping tape
Overall jackett
Structural Diagram
P42
Multi-Fiber Break-out Round Indoor Cable Ⅰ
Technical Characteristics
• Good mechanical and environmental performance.
• Flame retardance meets relevant standards.
• Support high-capacity data transmission.
• Suitable for indoor horizontal cabling.
• Suitable for pigtail fiber, jumper wire, and optical connection in optical communication machine room,
optical distribution frame, optical device, equipment, etc.
• Jacket can be made of flame retardant PVC, LSZH flame retardant polyolefin or other agreed materials.
• Customized design is available.
Performance
Fiber Count
Cable Size
(mm)
Cable
Weight
(kg/km)
Tensile Load(N) Crush Load (N/100mm) Temperature
Range(°C)
Long-term Short-term Long-term Short-term
4 6.6 38 200 400 300 1000
-20 〜+60
6 7.8 58 250 500 300 1000
8 9 77 300 600 300 1000
10 10.7 108 350 700 300 1000
12 11.9 135 400 800 300 1000
Note 1. Minimum bend radius:for B1.1,B1.3, B4 single mode fiber and multi-mode fiber,20D under dynamic bending and 10D under static
bending;for B6 fiber, 10D (dynamic) and 5D (static).(D is overall diameter of round cable)
• The data of cable size and weight are calculated according to cf)2.0 single-fiber cable.
• All the data in the table are for reference and subject to change without notification.
Structural Diagram
Single-fiber cable
Non-metallic central strength member
Optional wrapping member
Jacket
P43
Multi-Fiber Break-out Round Indoor Cable Ⅱ
Structural Diagram
Technical Characteristics
• Good mechanical and environmental performance.
• Flame retardance meets relevant standards.
• Support high-capacity data transmission.
• Suitable for indoor horizontal cabling.
• Suitable for pigtail fiber, jumper wire, and optical connection in optical communication machine room,
optical distribution frame, optical device, equipment, etc.
• Jacket can be made of flame retardant PVC, LSZH flame retardant polyolefin or other agreed materials.
• Customized design is available.
Performance
Fiber Count
Cable Size
(mm)
Cable
Weight
(kg/km)
Tensile Load(N) Crush Load (N/100mm) Temperature
Range(°C) Long-term Short-term Long-term Short-term
14 11 102 450 850 300 1000
-20 〜+60
16 12 121 500 950 300 1000
18 12.7 133 550 1000 300 1000
20 13.6 156 600 1100 300 1000
22 14.5 168 650 1200 300 1000
24 15.5 185 700 1300 300 1000
Note 1. Minimum bend radius:for B1.1, B1.3r B4 single mode fiber and multi-mode fiber, 20D under dynamic bending and 10D under static
bending; for B6 fiber, 10D (dynamic) and 5D (static). (D is overall diameter of round cable)
The data of cable size and weight are calculated according to 中 2.0 single-fiber cable.
All the data in the table are for reference and subject to change without notification.
Single-fiber cable
Inner wrapping tape
Non-metallic central strength member Rip cord Outer wrapping tape Jacket
P44
Flat Optical-fiber-ribbon Indoor Cable Ⅰ
Technical Characteristics
• Good mechanical and environmental performance.
• Flame retardance meets relevant standards.
• Suitable for indoor cabling and lead-into-building cable.
• Suitable for pigtail fiber and jumper wire.
• For optical connection in optical communication machine room, optical distribu-tion frame, optical device,
equipment, etc.
• Jacket can be made of flame retardant PVC, LSZH flame retardant polyolefin or other agreed materials.
• Customized design is available.
Performance
Fiber Count
Cable Size
(mm)
Cable
Weight
(kg/km)
Tensile Load(N) Crush Load (N/100mm) Temperature Range (°C)
Long-term Short-term Long-term Short-term
4 2.5X3.5 9 80 200 200 500
-20 〜+60 6 2.5X4.0 11 80 200 200 500
8 2.5X4.5 12 80 200 200 500
12 2.5X5.0 14 80 200 200 500
Note 1. Minimum bend radius:forB1.1, B1.3, B4 single mode fiber and mult 卜 mode fiber, 20H under dynamic bending and 10H under static
bending; for B6 fiber, 10H (dynamic) and 5H (static). (H is the minor axis height of the flat cable.)
2. All the data in the table are for reference and subject to change without notification.
Structural Diagram
Non-metallic strength member
Optical fiber ribbon
Jacket
P45
Flat Optical-fiber-ribbon Indoor Cable Ⅱ
Structural Diagram
Technical Characteristics
• Good mechanical and environmental performance.
• Flame retardance meets relevant standards.
• Suitable for indoor cabling and lead-into-building cable.
• Suitable for pigtail fiber and jumper wire.
• For optical connection in optical communication machine room,optical distribu-tion frame, optical device,
equipment, etc.
• Jacket can be made of flame retardant PVC, LSZH flame retardant polyolefin or other agreed materials.
• Customized design is available.
Performance
Fiber Count
Cable Size
(mm)
Cable
Weight
(kg/km )
Tensile Load(N) Crush Load (N/100mm) Temperature
Range(°C) Long-term Short-term Long-term Short-term
4 1.0x4.3 8 130 300 200 500
-20 〜+60 6 1.0x4.8 10 130 300 200 500
8 1.0x5.4 12 130 300 200 500
12 1.0x6.5 14 130 300 200 500
Note 1. Minimum bend radius:forB1.1,B1.3,B4 single mode fiber and multi-mode fiber, 20H under dynamic bending and 10H under static
bending;for B6 fiber, 10H (dynamic) and 5H (static). (H is the minor axis height of flat cable.)
2. All the data in the table are for reference and subject to change without notification.
Metallic strength member Optical fiber ribbon Jacket
P46
GJXFH (Bow-type Drop Cable)
Structural Diagram
Technical Characteristics
• Small size, light weight, compact construction, easy to strip without tool for its special groove design, easy to
install.
• Special flexibility design, suitable for indoor and terminal installation where cable may be bended repeatedly.
• Optical fiber(s) is placed between two strength members, with excellent crush and tensile resistance.
• Excellent anti-bending property when G.657 bending insensitive fiber is applied, no influence on transmission
loss when the cable is installed at turnings indoors or in small spaces.
• Flame retardant LSZH jacket for indoor use.
• Avoid leading lightning indoors when entire non- metallic structure is applied.
Performance
Fiber Count
Cable Size
(mm)
Cable
Weight
(kg/km)
Tensile Load(N) Crush Load (N/100mm) Temperature Range
(°C) Long-term Short-term Long-term Short-term
1 3.0X2.0 9 40 80 500 1000
-40 〜+60 2 3.0X2.0 9 40 80 500 1000
3 3.0X2.0 9 40 80 500 1000
Note 1. Minimum bend radiusrfor B6 fiber, 1 OH under dynamic bending and 5H under static bending. (H is the minor axis height of flat cable.)
2. All the data in the table are for reference and subject to change without notification.
Non-metallic strength member
Colored coated fiber
Jacket
P47
GJXH (Bow-type Drop Cable)
Structural Diagram
Technical Characteristics
• Small size, light weight, compact construction, easy to strip without tool for its special groove design, easy to
install.
• Special flexibility design, suitable for indoor and terminal installation where cable may be bended repeatedly.
• Optical fiber(s) is placed between two strength members, with excellent crush and tensile resistance.
• Excellent anti-bending property when G.657 bending insensitive fiber is applied, no influence on transmission
loss when the cable is installed at turnings indoors or in small spaces.
• Flame retardant LSZH jacket for indoor use.
Performance
Fiber Count
Cable Size
(mm)
Cable
Weight
(kg/km)
Tensile Load(N) Crush Load (N/100mm) Temperature
Range
(°C) Long-term Short-term Long-term Short-term
1 3.0X2.0 11 100 200 1000 2200
-40 〜+60 2 3.0X2.0 11 100 200 1000 2200
4 3.0X2.0 11 100 200 1000 2200
Note 1. Minimum bend radiusrfor B6 fiber, 1 OH under dynamic bending and 5H under static bending.(H is the minor axis height of flat cable.)
2. All the data in the table are for reference and subject to change without notification.
Non-metallic strength member
Colored coated fiber
Jacket
P48
GJXD(F)H(Metallic (Non-metallic) Ribbon Fiber
Bow-type Drop Cable)
Structural Diagram
Technical Characteristics
• Small size, light weight, compact construction, easy to strip without tool for its special groove design, easy to
install.
• Special flexibility design, suitable for indoor and terminal installation where cable may be bended repeatedly.
• Optical fiber ribbon is placed between two strength members, with excellent crush and tensile resistance.
• Excellent anti-bending property when G.657 bending insensitive fiber is applied, no influence on transmission
loss when the cable is installed at turnings indoorsor in small spaces.
• Flame retardant LSZH jacket for indoor use.
Performance
Fiber Count
Cable Size
(mm)
Cable
Weight
(kg/km)
Tensile Load(N) Crush Load (N/100mm) Temperature Range
(°C) Long-term Short-term Long-term Short-term
4 4.0X2.0 13 (15) 40(100) 80(200) 500(1000) 1000(2200) -40 〜+60
Note 1. Minimum bend radius:for B6 fiber, 10H under dynamic bending and 5H under static bending. (H is the minor axis height of flat cable.)
2. All the data in the table are for reference and subject to change without notification.
Non-metallic strength member
Optical fiber ribbon
LSZH Jacket
P49
GYFTA (Waterproof Pigtail Cable)
Structural Diagram
Technical Characteristics
• Good mechanical and environmental performance.
• Flame retardance meets relevant standards.
• Suitable for optical connection in optical communication machine room, optical distribution frame.
• Suitable for equipment connection in one room or in different floors.
• Jacket can be made of HDPE,flame retardant PVC, LSZH flame retardant polyole- fin,TPU or other agreed
materials.
• Customized design is available.
Performance
Fiber Count
Cable Size
(mm)
Cable
Weight
(kg/km)
Tensile Load(N) Long-term Short-term
Crush Load (N/100mm) Long-term Short-term
Temperature Range
(°C)
4 8.5 54 200 400 500 1000
6 10 81 240 500 500 1000 -20〜+60
8 11.7 108 300 600 500 1000
Note 1. Minimum bend radius:for B1.1, B13, B4 single mode fiber and multi-mode fiber, 20D under dynamic bending and 10D under static bending;
for B6 fiber, 10D (dynamic) and 5D (static). (D is overall diameter of round cable)
The data of cable size and weight are calculated according to dp2.0 single-fiber cable.
All the data in the table are for reference and subject to change without notification.
Waterblocking tape Single-fiber cable
Non-metallic
Central strength member
Aluminum tape armor
Jacket
P50
Non-dispersion Shifted Single-mode Optical Fiber
(G.652B)
Structural Diagram
Technical Characteristics
• Model: G652B
• Standard: Complies with or exceed the technical specifications in ITU-T G.652.B&IECB1.1.
• Feature: Low attenuation, dispersion and PMD, suitable for high bit-rate and long distance transmission.
• Application: Suitable for all optical cable constructions, including ribbon, loose tube stranded, slotted core,
central tube, tight buffered designs.
Technical Parameter
Fiber Property Main Indexes Technical
Parameter
Geometrical
Dimensions
Cladding diameter 125.0±0.7um
Cladding non-circularity ≤ 1%
Coating diameter 245±7 um
Coating/cladding non-concentricity error ≤ 12 um
Coating non-circularity ≤ 6%
Core/cladding concentricity error ≤ 0.6um
Fiber curl (radius) ≥ 4m
Optical
Characteristics
Optical
Characteristics
MFD(1310nm) 9.2±0.4um
MFD(1550nm) 10.4±0.5um
Attenuation at 1310nm ≤ 0.34dB/km
Attenuation at 1550nm ≤ 0.20dB/km
Attenuation at 1625nm ≤ 0.24dB/km
Attenuation discontinuity at 1310nm ≤ 0.05dB
Max. attenuation at 1285-1330nm,compared to that at
1550nm ≤ 0.04dB/km
Max. attenuation at 1525-1575nm,compared to that at
1550nm ≤ 0.03dB/ km
Attenuation discontinuity at 1550nm ≤ 0.05dB
Outer Coating Cladding Core Inner Coating
P51
PMD ≤ 0.2ps/(km1/2)
PMD ≤ 0.1 ps/(km1/2)
Zero-dispersion wavelength 1312±12nm
Zero-dispersion slope ≤ 0.091
ps/(nm2.km)
1285 〜1339nm ≤ 3.4 ps/(nm.km)
1271 〜1360nm ≤ 5.3 ps/(nm.km)
Cable cutoff wavelength 入 c ≤ 1260nm
Mechanical
Property (Coating
strip
Force)
Proof test level 1%
Dynamic fatigue ≤20
Average value 1.5N
Peak value 1.3-8.9N
Environmental
Property
Temperature attenuation (-60~85℃),two cycles, at
1550nm) ≤0.05 dB/km
Temperature-humidity cycling attenuation (85 士 2℃,
relative humidity ≥85%, 30 days, at 1550nm) ≤0.05 dB/km
Water immersion attenuation (23±5℃ 30 days, 1550nm) ≤0.05 dB/km
Dry heat aging attenuation (85±2℃, relative humidity
50%,30 days, 1550nm) ≤0.05 dB/km
Bending
Property
1 turn, @32mm 1550nm ≤0.05 dB
100 turns @50mm 1310nm ≤0.05 dB
100 turns @50mm 1550nm ≤0.05 dB
100 turns @60mm 1625nm ≤0.05 dB
P52
Wavelength Band Extended Non-Dispersion Shifted
Single-mode Optical Fiber (G652D)
• Model: G652D
• Standard: Complies with or exceed the technical specifications in ITU-T G.652D&IECB1.3.
• Features: 1260〜1625nm full band transmission, superior optical property satisfies the
transmission requirements of DWDM and CWDM system.
• Application: suitable for all optical cable constructions, including ribbon, loose tube
stranded, slotted core, central tube, tight buffered designs.
Technical Parameter
Fiber Property Main Indexes Technical Parameter
Geometrical
Dimensions
Cladding diameter 125.0±0.7um
Cladding non-circularity ≤1%
Coating diameter 245±7 um
Coating/cladding non-concentricity error ≤ 12 um
Coating non-circularity ≤6%
Core/cladding concentricity error ≤0.6um
Fiber curl (radius) ≥4m
MFD(1310nm) 9.2 士 0.4um
MFD(1550nm) 10.4±0.5um
Optical
Characteristics
Attenuation at 1310nm ≤0.34dB/km
Attenuation at 1383nm ≤ 0.34dB/km
Attenuation at 1550nm ≤ 0.20dB/km
Attenuation at 1625nm ≤0.24dB/km
Max. attenuation at 1285-1330nm,
compared to that at 1550nm ≤0.04dB/km
Max. attenuation at 1525-1575nm,
compared to that at 1550nm ≤ 0.03d B/km
Attenuation discontinuity at 1310nm ≤ 0.05dB
Attenuation discontinuity at 1550nm ≤ 0.05dB
PMD ≤ 0.2ps/(km1/2)
PMDq ≤ 0.1 ps/(km1/2)
Zero-dispersion wavelength 1312±12nm
Zero-dispersion slope ≤ 0.091 ps/(nm2.km)
1285〜1339nm ≤3.4 ps/(nm.km)
P53
1271〜1360nm ≤5.3 ps/(nm.km)
Cable cutoff wavelength λc ≤ 1260nm
Mechanical
Property
Coating strip
Force
Proof test level 1%
Dynamic fatigue ≥ 20
Average value 1.5N
Peak value 1.3-8.9N
Environmental
Property
Temperature attenuation
(-60~85℃),two cycles, at 1550nm) ≤ 0.05 dB/km
Temperature-humidity cycling attenuation
(85 士 2℃, relative humidity≥85%, 30 days, at 1550nm) ≤ 0.05 dB/km
Water immersion attenuation
(23±5℃ 30 days, 1550nm) ≤0.05 dB/km
Dry heat aging attenuation
(85±2℃, relative humidity 50%,30 days, 1550nm) ≤0.05 dB/km
Temperature attenuation
(-60~85℃),two cycles, at 1550nm) ≤0.05 dB/km
Bending
Property
1 turn, @32mm 1550nm ≤0.05 dB
100 turns @50mm 1310nm ≤0.05 dB
100 turns @50mm 1550nm ≤0.05 dB
100 turns @60mm 1625nm ≤0.05 dB
P54
Non-zero Dispersion Shifted Single-mode
Optical Fiber for DWDM (G655C) • Model: G655C for DWDM
• Standard: Complies with or exceed the technical specifications in ITU-T G.655 & I EC B4.
• Feature: Compliant with the requirements of 10-40Gb/s transmission system at C and L
band.Fully compliant with system transmission requirements for its low attenuation,
dispersion, PMD and zero-Dispersion slope 丄 ow bending loss at 1550nm and the more
sensitive 1625nm window.
• Application: high bit-rate, single/multi-channel, long distance digital trans-mission
system; suitable for all optical cable constructions, including ribbon, loose tube stranded,
slotted core, central tube, tight buffered designs.
Technical Parameter
Fiber Property Main Indexes Technical Parameter
Geometrical
Dimensions
Cladding diameter 125.0±0.7um
Cladding non-circularity ≤1%
Coating diameter 245±7 um
Coating/cladding non-concentricity error ≤ 12 um
Coating non-circularity ≤6%
Core/cladding concentricity error ≤ 0.6um
Fiber curl (radius) ≥ 4m
Optical
Characteristics
MFD(1550nm) 9.1 10.1um
Attenuation at 1550nm ≤0.22dB/km
Attenuation at 1625nm ≤0.24dB/km
Max. attenuation at 1525-1575nm, compared
to that at 1550nm ≤0.02dB/km
Attenuation discontinuity at 1550nm ≤ 0.05dB
PMD ≤ 0.2ps/(km1/2)
PMD ≤ 0.1 ps/(km1/2)
Zero-dispersion wavelength ≤ 1520 nm
dispersion slope ≤ 0.084 ps/(nm2.km)
1530〜1565nm ≥ 2,≤ 6ps/(nm.km)
1565〜1625nm ≥ 4.5,≤ 11.2 ps/(n
m.km)
Cable cutoff wavelength λc ≤1450nm
Proof test level 1%
P55
Mechanical
Property
Dynamic fatigue ≥20
Coating strip Average value 1.5N
force Peak value 1.3-8.9N
Environmental
Property
Temperature attenuation
(-60℃±85℃, two cycles, at 1550nm) ≤ 0,05 dB/ km
Temperature-humidity cycling attenuation (85 土 2℃,
relative humidity ≥ 85%,30 days, at 1550nm) ≤0.05 dB/km
Water immersion attenuation
(23±5℃), 30 days, 1550nm) ≤ 0.05 dB/km
Dry heat aging attenuation (85±2℃,
relative humidity 50%,30 days,1550nm) ≤0.05 dB/km
Bending
Property
1 turn, @32mm 1550nm ≤0.05 dB
100 turns @50mm 1310nm ≤0.05 dB
100 turns @50mm 1550nm ≤0.05 dB
100 turns @60mm 1625nm ≤0.05 dB
P56
Bend Insensitive Single-mode Optical Fiber (G.657.A2)
• Model: G.657.A2
• Standard: Complies with or exceed the technical specifications in ITU-T
G.657.A1/A2/B2.
• Feature: Minimum bend radius 7.5mm,superior anti-bending property.Fully compatible
with G.652 single-mode fiber.Full band (1260〜1626nm) transmission 丄 ow PMD for high
bit-rate and long distance transmission.Extremely low micro-bending attenuation,applicable
for all optical cable types including ribbon cable.High anti-fatigue parameter ensures service
life under small bending radius.
• Application: All cable constructions,! 260〜1626nm full band transmission, FTTH high
speed optical routing, optical cable in small bend radius,small-size optical fiber cable and
device, L-band
Technical Parameter
Fiber Property Main Indexes Technical Parameter
Geometrical
Dimensions
Cladding diameter 125.0±0.7um
Cladding non-circularity ≤ 0.5%
Coating diameter 243 士 5 um
Coating/cladding non-concentricity error ≤ 12 um
Coating non-circularity ≤6 %
Core/cladding concentricity error ≤.5um
Fiber curl (radius) ≥4m
Optical
Characteristics
MFD(1310nm) 8.8±0.4 um
MFD(1550nm) 9.8 士 0.5 um
Attenuation at 1310nm ≤ 0.35dB/km
Attenuation at 1383nm ≤ 0.35dB/km
Attenuation at 1550nm ≤ 0.21 dB/km
Attenuation at 1625nm ≤ 0.23dB/km
Max. attenuation at 1285-1310nm, compared
to that at 1310nm ≤ 0.03dB/ km
Max. attenuation at 1525-157511m, compared
to that at 1550nm ≤ 0.02dB/km
Attenuation non-continuity at 1310nm ≤ 0.05dB/km
Attenuation discontinuity at 1550nm ≤ 0.05dB/km
PMD ≤ 0.2ps/(km1/2)
PMDq ≤ 0.1 ps/(km1/2)
Zero-dispersion wavelength 1312±10nm
P57
Zero-dispersion slope ≤ 0.092 ps/(nm2.km)
Dispersion at 1550nm ≤ 17ps/(nm.km)
Dispersion at 1625nm ≤ 22ps/(nm.km)
Cable cutoff wavelength Ac ≤ 1260nm
Mechanical
Property
Proof test level 1%
Dynamic fatigue ≥20
Coating strip Average value 1.7N
force Peak value 1.3-8.9N
Environmental
Property
Temperature attenuation
(-60~85℃),two cycles, at 1550nm) ≤0.05 dB/km
Temperature-humidity cycling attenuation (85 士 2℃,
relative humidity ≥85%, 30 days, at 1550nm) ≤ 0.05 dB/km
Water immersion attenuation
(23±5℃ 30 days, 1550nm) ≤ 0.05 dB/km
Dry heat aging attenuation (85±2℃,
relative humidity 50%,30 days, 1550nm) ≤ 0.05 dB/km
Bending
Property
10 turns, 15mm radius, at 1550nm ≤ 0.03 dB
10 turns, 15mm radius, at 1625nm ≤ 0.1dB
1 turn, 10mm radius, at 1550nm ≤ 0.1dB
1 turn, 10mm radius, at 1625nm ≤ 0.2dB
1 turn, 7.5mm radius, at 1550nm ≤ 0.2dB
1 turn, 7.5mm radius, at 1625nm ≤ 0.5dB
P58
Covering Sheet for Communication Optical Cable
(complex type covering simple type)
Description Type structure type The left one covering the right one
Communicati
on
Optical Cable
Optical
Cable
Stranded
Optical Cable
GYTA53/GYTS53 GY(T)A GY(T)Y
GY(T)Y53 GY(T)S GY(T)Y
GYTA333 GYTA33 GY(T)A GY(T)Y
GYTS333 GYTS33 GY(T)S GY(T)Y
GYFTY53 GYF(T)Y
GYFTY63 GYF(T)Y
Central Tube
Optical Cable
GYXTW33 GYXTS
GYXTW GYXTY
GYXTW53 GYXTW GYXTY
GYXTA
GYFXTY
Optical
Fiber
Ribbon
Cable
Stranded
Optical Cable
GYDTA53 GYD(T)A GYD(T)Y
GYD(T)Y53 GYD(T)S GYD(T)Y
GYDTA333 GYDTA33 GYD(T)A GYD(T)Y
GYDTS333 GYDTS33 GYD(T)S GYD(T)Y
GYFDTY63 GYFD(T)Y
Central Tube
Optical Cable
GYDX(T)W33 GYDX(T)Y
GYDX(T)W GYDX(T)Y
GYDX(T)W53 GYDX(T)W GYDX(T)Y
GYDX(T)A
Note 1. The covering principle: besides the complex one covering the simple one, must be more fiber cores type covering the less one. (For
example: GYTA53 12B1 cannot covering GYTA 24B1).
2. The testing items and performance for GYTS53 is the same as that for GYTA53.
P59
Covering Sheet for Flame-retardant non-metallic Communication Optical Cable
(complex type covering simple type) Description Type structure type The left one covering the right one
Communicatio
n
Optical Cable
Optical
Cable
Stranded
Optical
Cable
GYTA53 GY(T)A GY(T)Y
GY(T)Y53 GY(T)S GY(T)Y
GY(T)ZA GY(T)A GY(T)Y
GYTZA53 GY(T)ZY GY(T)Y
GY(T)ZY53 GY(T)Y53 GY(T)S GY(T)Y
GY(T)ZS GY(T)Y
GY(T)ZY GY(T)Y
GYFTZY53 GYF(T)Y53 GYF(T)Y
GYF(T)ZY GYF(T)Y
Note The covering principle: besides the complex one covering the simple one, must be more fiber cores type
covering the less one. (For example: GYTA53 12B1 cannot covering GYTA 24B1).
P60
Qianxin High Technology Group
Web: www.QXHTgroup.com.cn
Tel: 0755-82590507
Fax: 0755-82590507
HQ Address: QianXin Industry Park, Gui'an Dist, Guizhou Province
Shenzhen Add: 4/F, Build 5, Fu'An Robot CS Industrial Park,Dayang
Street, FuYong town,BaoAn Dist 518103, ShenZhen, China