fibretec product catalog for testing instruments

1

Phys

ical

Pro

pert

y Te

stin

g In

stru

men

ts

SCAN P 7, SCAN P 47, TAPPI T411, CPPA D.4, ISO 534, ISO 3034, FEFCO No.3, DIN 53105, BS 3983, BS 4817

Gulab Nagar, Roorkee- 247 667 (U.K.) INDIA Phone: +91-1332-264276, Fax: +91-1332-261883 E-mail: [email protected] www.fibretec.org n n n

Physical Property Testing InstrumentsPhysical Property Testing Instruments

Fibretec Instruments are designed and manufactured in accordance with the latest applicable National and International Standard as IS, ISO, TAPPI, SCAN, ASTM etc. for varieties of Industries including Pulp Paper, Printing, Plastics, Packing, Rubber, Textile, Adhesives, Chemical and others. The range of instruments covered are as under.

1. Paper Board and Corrugated Board Testing Instruments.2. Pulp & Stock Preparation and testing Instruments.3. Corrugated and Solid Fibre Board Packing Testing Instruments.4. Flexible Packing Testing Instruments.5. Adhesive Testing Instruments.6. Plastic Testing Instruments.7. Universal Testing Machines from 100 Kgs to 200 Tonne.8. Ink Testing Instruments.9. Filter Paper Testing Instruments.

10. Sample Preparation Tools.11. Custom Built Laboratory Automation and Computerized Quality Testing Instruments as per the Customers Requirement.12. On line Automation for Basis Weight Control.13. On line Consistency Controllers.14. On line Viscosity Control for Coating Plants.15. Auto Guide for Felt & wire with Imported Bellows.16. Foam & Furniture Testing Instruments.17. Footwear Testing Instruments.18. Textile and Rubber Testing Instruments19. Wires, Felts & Fabrics Testing Instruments20. Environmental Testing Instruments

CATALOGUE NO. FBI-PT 1001

For rapid and accurate measurement of thickness of paper, board and plastics, foils etc. Thickness measured between two circular optically flat surface under the

2pressure of 1 Kg/cm (98Kpa)

A. Motorized (Digital) sturdy, easy to use with a single push switch operation. Digital Display with add-on type optical transducer

i. With Resolution 0.01 mm.ii. With Resolution 0.001 mm.

B. Motorized (Digital) Sturdy, easy to use with a single push switch operation. Digital Display, with Liner Variable Differential Transformer (LVDT) used as measuring transducer.i. With Resolution 0.01 mm.ii. With Resolution 0.001 mm.

C. Manual Hydraulic Controlled-Digital Display (LVDT Type) Lowering speed of the measuring spindle is hydraulically controlled.i. With Resolution 0.01 mm.ii. With Resolution 0.001 mm.

D. Motorized- Dial Type Sturdy, easy to use with a single push switch operation.

i. With Resolution 0.01 mm.ii. With Resolution 0.001 mm.

E. Manual Hydraulic Controlled- Dial Type Lowering speed of the measuring spindle is hydraulically controlled.i. With Resolution 0.01 mm.ii. With Resolution 0.001 mm.

F. Automatic Thickness Micrometer (Microcontroller Based)Programmable thickness Micrometer Motorized, Automatic/manual mode sturdy. Easy to use and “Push the button” operation Digital Display (LVDT) differential transformer used as measuring transducer with high accuracy, measurement in micron, mm,cm,inch, and miles, Measuring range : 0-15 mmMax Stroke : 18 mmResolution : 1 µm (0.00004”)Accuracy : 0-500 ± 1 micron, 500 micron - micron - 5 mm ± 0.2% and above ± 0.5%

APPLICABLE STANDARD

PRECISION THICKNESS MICROMETERS-DEAD WEIGHT TYPETAPPI/SCAN/ISO

MODEL No. FBI-PT 1001 F

MODEL No. FBI-PT 1001-B, C

MODEL No. FBI-PT 1001 D, E

2

Phys

ical

Pro

pert

y Te

stin

g In

stru

men

ts


TEARING RESISTANCE TESTERS- Elmendorf Type

For measuring the resistance against tearing of paper, board plastic films, foils and other similar

materials. An initial cut is made in a set of test piece which are then torn through a given distance

the work done in the test piece is measured as the loss in potential energy of a pendulum which is

free to swing on it horizontal axis. A calibrated scale indicate the mean tearing force.

A. With Single Pendulum

B. Electronic Tearing Resistance Tester (Microcontroller Based) With standard 'B' pendulum, automatic calculations through Microprocessor and presentation of measured value (average and individual), all of which ensure range, Set of calibration weights and Tearing sample cutter.

i. Manual Clamping

ii. Pneumatic Clamping

C. Computerized Tearing Resistance Tester - Monitoring is done through the FBI MONITOR SYSTEM which is a PC-based laboratory data acquisition system designed around the unique operating system such as WINDOWS 9X, ME & XP. The software has connectivity clamping of the test piece, automatic calculations through COMPUTER MICROPROCESSORS and presentation of measured value, all of which ensure accurate and stable test weights and Tearing sample cutter.

Options for all above models :

i. Extra interchangeable pendulum for different range 0-2000, 0-8000,0-16000, 0-32000 mN

ii. Tearing sample cutter.

iii. Set of Calibration weight

APPLICABLE STANDARD

SCAN P 11, TAPPI T414, CPPA D.9, ISO 1974, BS 4468, DIN 53128, APPITA/AS 1301.400


TENSILE STRENGTH TESTERS

For determining the tensile strength and elongation at break of the paper, board, metal foil, textile and plastics.

ELECTRO-MECHANICAL MODELS :

A. Electro-Mechanical - (Motorized Schopper Type) A reliable and cost effective model for

providing the determination of tensile strength and elongation of paper, paperboard and

other similar material. Pulling rate is regulated through DC variable speed drive during the

test.

Range 0-30 Kg. or 300 N.

0-60 Kg. or 600 N.

B. Electro-Hydraulic Type Give the pulling clamp a uniform and vibration free movement

regardless of the load. Hydraulic Oil pump specially designed, with a built-in variable

constant speed has a silent running and a long service life with low maintenance cost.

ELECTRONIC MODELS :

C. Electronic Tensile Tester (Vertical Model) with digital Display of Tensile strength & Stretch

of paper, paperboard and similar materials. Complete with memory for retaining peak value,

automatic or normal zero setting, overload and over travel protection facilities. With

imported load cell & imported DC motor. Standard Model Range : 0-50 Kgf or 500 N &

available in other load ranges 0-100 Kgf or 1000 N, 0-1000 Kgf or 10,000 N.

D. Electronic Tensile Tester (Vertical Model, Microcontroller Based) for providing rapid and efficient determination of tensile strength, tensile index, tensile factor, breaking length, elongation, elongation %age and tensile energy absorption (TEA) of paper and paperboard on in-built/external printer facility and imported load cell and indegenous DC Drive. Complete with memory for retaining peak value of load, automatic zero setting, overload and over travel protection facilities.

Standard Range : 0-50 Kgf or 500 N & also available in other higher ranges.

MODEL No. FBI-PT 1002 A

MODEL No. FBI-PT 1002 B

MODEL No. FBI-PT 1002 C



3

Phys

ical

Pro

pert

y Te

stin

g In

stru

men

ts

E. Electronic Tensile Tester (Horizontal Model, Microcontroller Based) User friendly software guides the operators through all steps of program selection, parameter modification and sample test to minimize the human error during test to provide rapid and efficient determination of tensile strength, tensile factor, tensile index, breaking length, elongation, elongation %age, tensile energy absorption (TEA), tensile stiffness and Z strength test of paper and paperboard with in-built /external printer, fitted with imported load cell & stepper motor.Standard Range : 0-50 Kgf or 500 N & also available in other higher ranges.

F. Computerized Universal Testing Machine Tester (Horizontal Model / Vertical Model) Monitoring is done through the FBI MONITOR SYSTEM which is a PC-based data acquisition system designed around the unique operating system such as WINDOWS 9X, ME & XP. The software has connectivity from 1 to 16 individual test stations. User friendly software guides the operators through all steps program selection, parameter modification and sample test to minimize the human error during test to provide rapid and efficient determination of tensile strength, tensile index, tensile factor, breaking length, elongation, elongation %age, tensile energy absorption (TEA), tensile stiffness, Z strength test of paper and paperboard with in-built printer/external, fitted with imported load cell & stepper motor. The automatic calculations through COMPUTER MICROPROCESSORS and presentation of measured value, all of which ensure accurate and stable test result.

0Applications : Tensile Tests, ZD Tensile Tests, Compression Tests, 90 /180 & 270 and Rotary Peeling Resistance Tests, Probe Tack Tests, Loop Tack Tests, Release and Adhesion Tests, Tearing Tests, Bending Tests, Burst TestsOptions with all Models of Tensile Testers : i. Graphical Display with facilities of displaying parameters of 1003D, E & graphs of time vs tensile force, elongation vs tensile force and tensile energy absorption. ii. Finch Device for Wet Tensile Test as per SCAN P 20, TAPPI T 456.iii. Precision Test Strip Cutter-cutting width 15mmx300.iv. Precision Test Strip Cutter-Die & Punch Type cutting width 15x300 mm. v. Easy interchangeable pneumatically operated clamp for 25 or 50 mm.vi. Attachments for Loop Tack, Probe Tack and Peeling Resistance for Label & Adhesives.

0

MODEL No. FBI-PT 1003 D

MODEL No. FBI-PT 1003 E



APPLICABLE STANDARD

SCAN P 38,SCAN P 67, TAPPI T494,TAPPI T541, CPPA D.34, ISO 1924/2, BS 4415, DIN 53112, APPITA/AS 1301.448, JIS P 8115, FINAT


MOISTURE METER

For measuring the moisture content of paper in stack form and at ONLINE Rolls at paper machine.

A. Portable Electronic Moisture Meter for ON LINE and SPOT check for Paper & Paperboard - (Based

on Radio Frequency Power Loss Measurement ) FIBRETEC PORTABLE ELECTRONIC MOISTURE

METER is designed primarily as production line tool measuring the moisture content of paper rolls in

motion on the paper machine. Rugged, stainless steel roller sensing electrode permit instantaneous, on

line or spot check non-destructive moisture problems in paper industry.

B. Portable Electronic Moisture Meter for Paper & Paperboard (Based on DC Resistance of sample)

Rugged, stainless steel sensing electrode permit instantaneous, spot check non-destructive test for

moisture measurement, on stationary or stack of paper. It is highly versatile to handle a variety of moisture

problems in paper industry.


Finch DeviceDie Punch Strip CutterPaper Guillotine

APPLICABLE STANDARD

SCAN P 4:63

Probe Tack

G. DIGITAL SHORT SPAN TENSILE TESTER For fibre strength, length, and bonding Potential of production pulp as well as paper at the reel. The zero-span tensile test may be used to determine the strength of pulp fibres when beaten under laboratory conditions, regardless of the laboratory beating procedure used. Measurement of zero-span tensile strength, in conjunction with tensile strength as well as other physical properties, is useful in optimizing new fibre-processing techniques and maximizing utilization of new fibre sources such as recycled fibres. Microcomputers collect, store, process and calculate data. The data is then presented on the LCD screen and an alphanumeric printer. Fixed programs run for routine tests by means of 4x5 matrix keyboard.Display max. 20x4LCD, alphanumeric or 128x64 graphical display. Printer max. 20 positions, stirp width 70 mm-. Individual, manually loaded tests. Pre-set short span adjustment. Rugged construction. Precision Pneumatic clamping surfaces machined to “Zero” tolerance. Zero Span Tensile Force, Tensile Strength, Tensile Index results and input loaded parameter on LCD-Display and Thermal printer facility.

APPLICABLE STANDARD : TAPPI T 279 pm99, ISO 15361:2000

4

Phys

ical

Pro

pert

y Te

stin

g In

stru

men

ts


DIGITAL REFLECTANCE METER (Photo Volt Type)

A. For electronically measuring and digitally presenting the Brightness, Opacity, Color and Gloss of the paper and other similar material by angular reflectance (Photovolt Type) Made with imported optics and imported sensors.

B. Digital Gloss Meter (Photovolt Type) to measuring the gloss value of paper & paperboard 0 0 0 0and similar materials as per TAPPI standard angle at 20 ,60 , 75 & 80

Accessories : i. White Enamel High Reflectance Standardii. Polished Black Glass iii. Black Zero Cavity & Cavity for Powder Filling

MODEL No. FBI-PT 1006




A. Brightness, & Opacity Tester (ISO) The instrument measures brightness, opacity and color by diffused reflectance according to relevant ISO standards. It gives an instantaneous digital readout, which shows the Brightness, Opacity, Rx, Ry, Rz and ERIC values of pulp, paper, paperboard, coating agents, filter ,mineral and other similar materials. Made with imported opticals.

B. Brightness, Opacity & Color Tester -ISO (Microprocessor based) The instrument measuring brightness, opacity and color by diffused reflectance according to relevant ISO standards. Gives out instantaneous digital read / printout, which compute worked out details such as CIE, Tri stimulus color, Rx, Ry, Rz, x,y,z, CIE Lab, Hunter Lab, ERIC values materials. It includes built-in/external Printer and different ranges of measurement routine. Made with imported Opticals.

APPLICABLE STANDARD


COMPUTERIZED BRIGHTNESS, OPACITY & COLOR TESTER- SPECTROPHOTOMETER


INFRA RED MOISTURE BALANCE

A. For determination of moisture content in materials which do not undergo chemical change when exposed to infra red radiation. 250 watts infra red lamp provided as heating element. Testing capacity for samples from 5-25 gm.

B. Digital Moisture Balance

Fibretec Moisture Balances incorporates rapid Halogen heating with EMFC precision weighing technology to determine moisture content of samples quickly and effectively.

The most efficient instrument in the market for determining Moisture.Easy & Fast Moisture Determination3 types of Testing Methods:- Manual, Time Programmable, Automatic

Gloss Unit

DIGITAL BRIGHTNESS TESTER (ISO Model)

The instrument measuring brightness, opacity and color by diffused reflectance according to relevant ISO standards. Incorporated the best features which can be seen on international class of spectros. With highly advanced Holographic diffraction grating for dispersing diffused light, coupled with a highly sensitive and accurate discrete sensing photo diode array detector. Easy to use window based software to measure diffused brightness, (ISO, TAPPI), color values, CIE Tri stimulus, Rx, Ry, Rz, x, y, z, L, a, b, L*c*h* values, yellowness, & whiteness, color graph, spectral reflectivity 400-700 nm and color difference using CIE Lab, Hunter, Suitable for pulp, paper, paperboard, textile, dies and pigments, paints, plastics, ceramics, cosmetics, pharmaceuticals, leather, mineral, color filters and packing industries according to International standards. Made with imported optics & Imported sensors. With Pentium Computer, color Monitor and Printer.

Option for all models : Powder Press (Tablet Preparations Unit) for determination of brightness and other parameters of China clay, calcium carbonate, casein and other similar powdered material. POWDER PRESS CAVITY

ISO 2469, 2470,2471, 2472, 3680, TAPPI T 519, 525, 527,560, CPPA E1, E2, DIN 53-140, CIE 1976,SCAN G5,P3,P8,P66,P71,P72

ISO 2469, 2470, 2471,2472, TAPPI T 519,T 525, T 527, T 534, T 560, SCAN G5,P3,P8,P66,P71,P72CPPA E1, E2, CI E 1976

APPLICABLE STANDARD

APPLICABLE STANDARD : TAPPI T 452,T 425,T524

5

Phys

ical

Pro

pert

y Te

stin

g In

stru

men

ts



MODEL No. FBI-PT 1009 D

For evaluating stiffness and resillient qualities of paper, plastics, cardboard, light metallic sheets, foil and other flexible material having comparatively strong bending resistance. One end of the test piece is easily fastened into the clamp. The maximum force required to bend the test piece to a specified angle is presented on the graduated scale.

A. Stiffness Tester (Taber Type) with triple shear cutter - Measuring range 0-10000 Stiffness Units of Taber.

B. Electronic Stiffness Tester - Measuring range 0-5000 mN, accuracy of load cell within ± 2% of the true reading but not better than ± 1% of 5000 mN. With imported load cell.

Option : Other measuring range 0-10000 mN.

C. Resonant Stiffness Tester - is intended for determination of stiffness of newsprint and multilayer carton board performing non destructive test.

Range : 1 - 10,000 of Resonance stiffness

D. Crease Stiffness Tester - (Pira type) Important in the folding of carton blanks during their erection & column.

Range : 0-1000 gf.


LABORATORY CRUSH TESTERS

A. Constant Speed Lab Crushing Tester - For determining the edgewise ring crush or flat crush resistance of corrugated board, paperboard, paper & plastics etc. Load range 0-50 Kg., 0-100 Kg.

B. Electronic Lab Crush Tester - With digital readout : For accurate testing of paper, paperboard, solid fiberboard & corrugated board for RCT, ECT, CCT and FCT test and its components as well as performing compression test on all small packages. Accessories provided for RCT testing only, Load range : 0-50 and 0-500 Kg. (5000 N.)

Option for all models :

i. Precision Test Strip Cutter Punch & Die Type - For preparation of test pieces towards use in Ring Crush Tests. Width 12.7 mm x 152 mm.

ii. Circular Cutter For Flat Crush Test - Cutting out circular sample of board and similar materials . One test specimen at a time for measurement of Flat Crush Test.

iii. Circular Neck Down Cutter - For preparation of test pieces for measurement of Edge Crush Test.

iv. Sample Cutter for Edge Crush Tester - Sample size width 25, 50 mm.

v. Support block for Edge Crush Test

vi. Pin Adhesion Attachment - To measure glue strength



BURSTING STRENGTH TESTERS (MULLEN TYPE)

For determining the brusting strength of paper and or paperboard. Measurement can be made either by Bourdon Tube Pressure Gauge or by Pressure Transducer in Digital Readout.


STIFFNESS TESTER

APPLICABLE STANDARD

MODEL No. FBI-PT 1011 A i

A. Motorized with Manual Clamping - Uniform Hydraulic Pressure produced through electronic motor and gear. Pressure Measurement by Precision Bourdon Pressure Gauge with "Peak Value Indicator"

2i. For paper & paperboard- Clamping by lever arm - Range : 0-7, 0-10 Kg/cmii. For Strong Paper, Solid Fibre & Corrugated board- Specimen tightened by screw

2 clamping through rotation of wheel handle - Range : 0-20, 0-40, 0-70 Kg/cm Available in other standard pressure gauge ranges.

ISO 2493, 5629, TAPPI T 489M60, T 556,T 535,T820,T 836, SCAN P29,P64,P65, DIN 53121, 53123, BS 3748, ASTM D747-61T, JIS P8125

ISO 7263, 3035, 3037, TAPPI T 824,T 809,T 811,T822, T 823, 808, SCAN P42, P27, P33, P32, P34FEFCO No.6, 8, 50, CPPA D.24, D.20, D.33

APPLICABLE STANDARD

6

Phys

ical

Pro

pert

y Te

stin

g In

stru

men

ts

MODEL No. FBI-PT 1011 A ii


MODEL No. FBI-PT 1011 B i,ii

MODEL No. FBI-PT 1011 C ia, iia

MODEL No. FBI-PT 1011 E

MODEL No. FBI-PT 1011 C ib, iib

B. Motorized with Pneumatic Clamping - Uniform Hydraulic Pressure produced through electric motor and gear to avoid samples slippage under adjustable clamping force by compressed air. Pressure Measurement by Precision Bourdon Tube Pressure Gauge with "Peak Value Indicator.

i. For paper and paperboard.ii. For strong paper, Solid fibre & Corrugated board

Options for A & B models : i. Pressure Measurement by Digital Pressure Transducerii. Double Pressure Gauge System for above.iii. Standard pressure gauge of range 0-4, 0-7, 0-10, 0-20, 0-28, 0-40, 0-70

2kg/cm

C. Digital Bursting Strength Tester (Burst-o-matic) Uniform Hydraulic Pressure produced

through electric motor and gear with digital readout on 4½ digit DPM, with Manual lever or

Pneumatic clamping of specimen and testing cycle. Complete with memory for retaining

peak value, automatic or normal zero, overload and over protection facilities.2i. For paper & paperboard - Range : 0-50 kg/cm

a. Manual lever clamping

b. Pneumatic clamping2ii. For strong paper, Solid fibre & Corrugated board - Range : 0-70 kg/cm

a. Manual lever clamping

b. Pneumatic clamping

Option :

i. Special light weight (>12 Kg) of bursting strength tester

ii. Pneumatic clamping of specimen available.

iii. Printer facility with printout of bursting strength, index and factor.

D. Digital Bursting Strength Tester (Micro controller Based) Uniform Hydraulic Pressure

produced through electric motor and gear, with digital LCD display (Alphanumeric) of

bursting strength, burst factor, burst index and other parameters after feeding the GSM by

five keys input. Fully automatic control with pneumatic clamping of specimen and testing

cycle also available on option with printout facilities. Complete with memory for retaining

peak values of bursting strength, burst factor & burst index. Overload and over protection

facilities.

i. For paper & paperboard

ii. For strong paper, Solid fibre & Corrugated board

E Digital Bursting Strength Tester (Microcontroller based) - Uniform Hydraulic Pressure

produced through electric motor and gear with digital display & printout of bursting

strength, burst factor, burst index and other parameters like date, time, lot number, serial

number and GSM entered. The parameters are loaded through matrix 4x4 keyboard.

Fully automatic control for pneumatic or normal zero setting, overload and over protection

facilities with user calibration setup.

Option :

i. Graphical Display with facilities of displaying parameters of 1011E & graphs of time

vs force and energy absorption.

ii.Double clamping system and dual range for paper, paperboard and

corrugated board with equipment is optional.

F. Computerized Bursting Strength Tester (PC based) - Monitoring is done through the FBI

MONITOR SYSTEM which is a PC- based laboratory data

acquisition system designed around the unique operating

system such as WINDOWS 9X, ME & XP. The software has

connectivity from 1 to 16 individual test stations. User friendly

software guides the operators through all steps of program

selection, parameter modification and sample test to minimize

to human error during test to provide rapid and efficient

determination of Bursting strength, Bursting energy absorption

(BEA) of paper and paperboard with in-built/external printer,

fitted with imported pressure transmitter & stepper motor. The

a u t o m a t i c c a l c u l a t i o n s t h r o u g h C O M P U T E R

MICROPROCESSORS and presentation of measured value, all of which ensure accurate

APPLICABLE STANDARD

SCAN P 24, P 25, TAPPI T403, T807, T810, CPPA D.8, ISO 2758, 2759, FEFCO No.4, BS 3137, JIS 8112, ASTM D 751, D 3393

MODEL No. FBI-PT 1011 Cia & iia

7

Phys

ical

Pro

pert

y Te

stin

g In

stru

men

ts






APPLICABLE STANDARD

TAPPI T410, ISO 536, APPITA /AS 1301.405, BS 3432, CPPA D.3, DIN 53104, SCAN P6


QUADRANT SCALES

For measuring the basis weight GSM of paper and other sheet materials by weighing a small test Sample with given dimensions. The scales also have the grams weight graduations to calibrate the instruments.

Range Available

i. 0-125 GSM template 20x20/20 x 25/40 x 25 cm. Radius 30 cm.

ii. 0-250 GSM template 20x20/20 x 25/40 x 25 cm. Radius 30 cm.

iii. 0-350 GSM template 20x20/20 x 25/40 x 25 cm. Radius 30 cm.

iv. 0-500 GSM template 10x10/20 x 20/20 x 25/40x25 cm. Radius 30 cm.

v. 0-1000 GSM template 10x10/20 x 20/20 x 25/40x25 cm. Radius 30 cm.

Template size can be selected any.With two ranges 0-175 & 0-350 GSM, Template 20x25x/20x50 cm. Radius 30 cm.

With two ranges 0-500 & 0-1000 GSM, Template 20x25x/20x50 cm. Radius 30 cm.

With two ranges 0-1000 & 0-2000 GSM, Template 10x15x/20x20/20x25x25x40 Radius 30 cm.

With two ranges 0-500 & 0-1000 GSM, Template 20x25x/20x50 cm. Radius 50 cm.

a) 0-500 GSM. Template 40x40 cm.

Effective weight 0-80 gm. Radius 50 cm.

b) 0-1000 GSM. Template 40x40 cm.

Effective weight 0-160 gm. Radius 50 cm.

With four range 0-175, 0-350, 0-500 & 0-1000 GSM, Template, 20x25 cm.

Effective weight 0-50 & 0-17.5 Radius 30 cm.

A. Köhler Molin Type with five figure digital impulse counter - Loading clamps of dead weight type, giving standard load of 800 gm, during test. With five figure impulse counter having hold and zero setting. For testing two strips at the same time, done in oscillating clamps, and the tension of the strips is effected by means of weights.

Option : Five digit counter based on microcontroller circuitry

B. Schopper Type with five figure impulse counter - Motor driven, Self contained unit, suitable for paper & films upto 0.010" (0.25mm). Loading clamps of spring type giving standard load of 1000 gm during the test. With five figure digital impulse counter having hold and zero setting. Two horizontally opposed and movable clamping jaws, which holds specimen 100 mm (4") long under variable tension during the folding cycle.

C. MIT Type A constant tension is applied to test specimen of width 15mm and the specimen is bent O

135 each to the left and right. Tension is applied by means of spring. Rotation speed 175 cpm & 90 cpm.

Option for all models : Five digit counter based on microcontroller circuitry.


FOLDING ENDURANCE TESTER

For determining the folding endurance of all kinds of paper, paperboard, foil & films with a standard folding speed per minute.


DIGITAL GRAMMAGE SCALE

For all the above ranges. For measuring the basis weight GSM of paper and other sheet materials

by weighing a small test sample with given dimensions. The GSM of the specimen display directly

on Digital panel meter. Range : 0-1000 GSM on template 10x10 cm or 20x25 cm. . Selection for

GRAMS & GSM to check the calibrations. Accuracy 0.1 GSM & 0.1 g2Optional : Circular cutter of 100 cm .

APPLICABLE STANDARD

SCAN P 17:77, TAPPI T 423/453, TAPPI T453/511

APPLICABLE STANDARD

TAPPI T410, ISO 536, APPITA /AS 1301.405, BS 3432, CPPA D.3, DIN 53104, SCAN P6

8

Phys

ical

Pro

pert

y Te

stin

g In

stru

men

ts

MODEL No. FBI-PT 1017 A,C

MODEL No. FBI-PT 1017 D,E



For cutting out circular sample of paper, board and similar materials. One test specimen at a time

2 2 2 2A) 50 cm B) 100 cm C) 150cm D) 200cm


PRECISION PUNCH & DIE CUTTERS

PRECISION CIRCULAR CUTTER (Hand Wheel Type)

For speedy and accurate cutting of circular & square samples, without any deformation and damage. Suitable for cutting a very wide range of sheet material such as plastics, textiles, paper and paperboard. Multi Test Samples Cutting simultaneously feasible. Intended for accurate and rapid preparation of test piece for use in tensile strength, stiffness tester, folding endurance, ring crush & other instruments.

A) Strip Punch : For preparation of test pieces towards use in tensile strength tests size 15 x 300 mm.

B) Strip Punch : Cutting width 12.7x152 (1/2"x6") mm for Ring Crush Test.

C) Sheet Punch : The compact cutting machine, Manually operated. Cut size21x29.7cm/20x25 cm. and other size.

D) Sheet Punch : (Motorized) Cut size 10x20, 20x25 cm and available for other sizes.

E) Sheet Punch : (Pneumatic) Cut size 10x20, 20x25 cm and available for other sizes.2F) Sample Punch : 100 cm and available for other sizes.


OIL ABSORBENCY TESTER - COBB UNGER TYPE

For determining the absorptive capacity of paper by measuring the amount of fluid (aquesous or non aquesous, fluids, oil varnishes) absorbed by the paper surface. Suited for evaluating the quality of printing paper with regard to blotting and set off of printing ink and two surface, as well as

3varnishing and impregrating suitability of paper, Reservoir capacity 250 cm . Surface to be tested 2100 cm

The direct quadrant balance is provided to give the difference weight of untreated and treated sample.

APPLICABLE STANDARD : SCAN P 37:77


APPLICABLE STANDARD

TAPPI T808, APPITA /AS P407, ISO 1924.2,

For accurate and rapid preparation of test pieces.

A. Precision Sample Cutter - Provided with an automatic clamping device, which by means of clamping beam, holds the sheet material firmly prior to the cutting size 210x300 mm. Provision for cut the strip sample for tensile test Cutting width 15 mm x 300 mm

B. Precision Test Strip Cutter - Provided with adjustable scaling arrangement to cut multi size strips.

C. Sample Cutter for edge crush test- Sample size width 25,50 mm.

D. Precision Triple shear cutter for preparation of test piece towards stiffness test. Cut size 1½" x 2¾".


PRECISION STRIP CUTTERS


PAPER ELECTRIC INCINERATOR

For determining the ash content in paper, cardboard and other cellulosic material, by burning exactly weighed quantity, and by obtaining the weight %age of the remains.Options : Digital Temperature indicator cum control.

APPLICABLE STANDARD : SCAN P5, TAPPI T413, ASTM D586 MODEL No. FBI-PT 1019


9

Phys

ical

Pro

pert

y Te

stin

g In

stru

men

ts

MODEL No. FBI-PT 1020A

MODEL No. FBI-PT 1020C

MODEL No. FBI-PT 1022 A,B



INTERNAL PLY BOND TESTER

A. For determining the internal bond strength of paper, board and laminates. Dual capacity pendulum of 0-0.25 FT/LB and 0.1-0.5 FT/LB. Readings directly on calibrated scale.

B. For determining the internal bond strength of paper, board and laminates. Reading consolidated into one scale upto 0.347 FT/LB. Reading directly on digital display panel.

APPLICABLE STANDARD:

C. ZD TENSILE TESTER was developed to determine the structure of a sheet of paper or board when subjected to tensile stresses in the out-of-plane direction or Z-Direction. Z-Directional Tensile Strength is a measure of the internal fiber bonding strength of a substrate.

ZDT measures internal bonding strength such as the Scott Bond method for materials strength testing. ZDT measures strength properties which aid in improving printing and coating applications, bonding strength of paper cores, de-lamination strength, intrinsic fiber bond strength, paperboard and combined board strength and fiber-to-fiber bond strength. Peak Force is measured to a maximum capacity of 1100 N (250 Lbs) with a 0.04 N (0.01Lbs) resolution and accuracy of ±0.5% of reading.

APPLICABLE STANDARDS: TAPPI T541, ISO 15754

TAPPI T569 PM00, TAPPI um 403


WATER ABSORPTION TESTER-KLEMN TYPE

For measuring the degree of water absorption of paper & cloth by the principle of the capillary rise in millimeters by suspending a specimen in a vat filled with water. Eight pieces of specimens (15 mm wide) are clamped at the top, their lower end is exposed to water in the vessel at the bottom and the amount of water absorbed and risen in the specimens is read from the scale and time. Similarly absorption characteristics of liquids like ink, oil etc. can also be measured. Scale Range 0-200 mm.APPLICABLE STANDARD : SCAN P 13:64


For determining the water absorbency of paper, paperboard and corrugated fiber board. 2Measures the increase of a sample, exposed to water for a given time. Test area 100 cm . With

couch roll of width 210mm, weight 10 kg.

A. Automatic : Spring loaded sample clamping.

B. Tilting Type : Lid clamped by way of spring loaded finger grip.

COBB SIZING TESTER

APPLICABLE STANDARD

SCAN P 12, TAPPI T441, CPPA F.2, ISO 535, FEFCO No.7, BS 2644, DIN 53132,

NFQ 03- 015, APPITA-AS 1301.411, EN 20535


OIL PENETRATION TESTER (WILLIAM TYPE)

For determining the penetration time of oil and other liquids through paper and other similar materials. Provided with cooling system, Electronic PID control for constant temperature regulation and Electronic Self Starting Timer in built.

APPLICABLE STANDARD

TAPPI T 462, ASTM


PAPER SURFACE OIL ABSORBENCY TESTER (SOAT) PATRA TYPE

APPLICABLE STANDARD

ASTM


For determining the oil absorption resistance of the surface of paper and paperboard. Using an average of 10 tests, the Surface Oil Absorption Time can be determined.The Surface Oil Absorption Time is the time taken for the 75% of the surface covered by oil to have absorbed the oil. The test is very sensitive to temperature. Inclined plane 500 x 100 mm with a 4.5 degree gradient. Inclined plane covered with rubber offset blanket. Brass Roller 2.1 Kg, 76 mm diameter and 55 mm. Oil burette delivers 0.02G oil droplet. Steel holder for oil burette. Electronic self starting timer as an optional accessory.


10

Phys

ical

Pro

pert

y Te

stin

g In

stru

men

ts


Water Drop Tester or Surface wettability Tester (STFI TYPE) for determining the contact angle of liquid drop of water, oil wetting agent & size for corrugated fiber board. Projection screen of matt glass 160x90 mm. magnification 25 x


WETTABILITY TESTER

APPLICABLE STANDARD : SCAN P 18:66, TAPPI T458, ASTM D 724, CPPA F.3


AIR PERMEABILITY TESTER (GURLEY TYPE)

A. DENSOMETER (GURLEY TYPE) For measuring porosity, air permeability or air resistance of paper and paper products by determining the time necessary for a certain volume of air flow through the inserted sample, under a uniform pressure.Options : Digital self starting timer

B. SMOOTHNESS, POROSITY & SOFTNESS TESTER (GURLEY TYPE)For testing the average smoothness, porosity and softness of paper and films by determining the time necessary for a certain volume of air to flow through the inserted sample, under a uniform pressure.

C. HIGH PRESSURE POROSITY & SOFTNESS TESTER (GURLEY TYPE)For measuring the high pressure porosity & softness of paper and films by determining the time necessary for a certain volume of air through the inserted sample, under a uniform pressure.Optional :ELECTRONIC SELF STARTING TIMER : As an optional accessory, for automatic

3measuring of either 25, 50, 100, 150, 200 or 300 cm air to pass through the test specimen. The timer starts automatically when the zero slit of the graduated ruler pass an optional read fork and stops automatically as soon as the predetermined volume of air has been passed through the sample.


PAPER CURL TESTER

To measure the Degree of curl when one side of the paper sample exposed to water. The maximum curvature is proportional to that produced when printing paper is in use. Moreover, by measuring the time required till curvature become maximum, a scale is obtained as curl size degree which enables to compare with the relative degree of sizing.

APPLICABLE STANDARD : TAPPI T520,T466m-52,

APPLICABLE STANDARD

SCAN P 19, SCAN P 53, TAPPI T460, T479sm-48, CPPA D.14, ISO 3687, APPITA /AS 13001.420,

ASTM D726,




DIGITAL AIR PERMEABILITY TESTER (VALMET TYPE)

Fibretec's permeability tester is accurate on a large range of permeabilities. It is widely used for testing paper, paper machine forming fabrics, press felts & dryer fabrics and filter papers. T h e

2accuracy of tester is based on the large flow of outlet area (10cm ) of the measuring head. The orifice disc with 6 different hole diameters gives a wide range of permeability from 150 - 16000

3 2m /hm . The display of the input pressure and pressure difference is displayed on Digital Pressure Gauge with imported pressure transmitter. Variable fan speed adjustor.



SHORT SPAN COMPRESSION TESTER (MICRO CONTROLLER BASED)

For measuring compression strength in paper and board in the grammage range 100-400 GSM. Compression strength is the maximum force per unit of the strip width in the sheet plane which a sample can with stand during a compression test. The ratio of compression strength and grammage is compression index. Measuring range 300N, Pneumatic clamps, adjustable clamping force. With inbuilt printer, fitted with imported Japanese load cell and stepper motor.


APPLICABLE STANDARD : SCAN P46, TAPPI T826, ISO 9895, DIN 54 518 BS 7325

Phys

ical

Pro

pert

y Te

stin

g In

stru

men

ts

11






SMOOTHNESS POROSITY TESTER (BENDTSEN TYPE)

A. AIR FLOW TYPE (ROTAMETER):For determining smoothness and porosity of paper & paperboard, based on rotameter airflow principle. Provide with three imported variable area flow metes (Rotameter) and accessories.

Measuring Range : 5-150ml/min.

50-500ml/min.

300-3000ml/min.

B. ELECTRONIC SMOOTHNESS & POROSITY TESTER (BENDTSEN TYPE)

For determining the smoothness and porosity of paper and board, based on mass flow meter principle. Provided with imported sensor and accessories

Measuring Range: 0-300ml/min.

0-3000ml/min.

I. DIGITAL BASED with Roughness and Porosity value on 4.5 Digit seven segment Display

II. MICROCONTROLLER BASED system with parameter inputs and all output of Roughness, Porosity and Permeability on LCD display and inbuilt Printer.

APPLICABLE STANDARD

SCAN P 21, P 60, BS 4420, TAPPI UM 535, ISO 2494, 5636/3, APPITA/AS 1301.440

DIN 53120


FLUFF TESTER (PATRA TYPE)

A. FLUFF TESTER is intended to determining the linting tendency of uncoated printing paper. The tester enables fluff to be measured easily after simulating the action of printing press using a dry blanket. It is based on the concept of PIRA. The tester is capable of giving reproducible result and the fluff build-up proceeds at a steady rate with a number of sheets.

B. FLUFF TESTER (GFL TYPE)

It consists of two rollers in contact under a known pressure. One of the roller is covered with rubber blanket and other roller is made of chrome plated stainless steel with a doctor. Water bath moistened the steel roller. The fluff is transferred to stainless steel roll and washed off and recovered in the water.

APPLICABLE STANDARD

SCAN C 32:78, P 35:72, TAPPI

This equipment measure the roughness / smoothness as per the condition in the printing press nip at the moment of printing, by clamping the sample between a precise measuring head and a specially backing assembly with variable clamping pressure. Ideally suitable for writing printing, coated paper and paperboard. The micrometer values measure directly on calibrated Variable Area flow Meters (Rotameters/digital Panel Meter)

A. Rotameter Model : (Variable Area Flow Meter) Measuring Range : 0.9-6.0µm(Micrometers)

B. Digital Model (Microcontroller Based) Measuring Range 0.6-6.0 µm (Micrometers)


PRINT SURFACE ROUGHNESS/SMOOTHNESS TESTER

APPLICABLE STANDARD

BS 6563, SCAN P 76, ISO 8791/4



DIGITAL BALANCE

DIGITAL BALANCE is intended to determining the weight of the

specimen. Stainless steel platter material.

Automatic recomputing function to enhance sampling accuracy.

Power Supply : 230 V/ AC, 50 Hz

Capacity: 300 gms to 2000 kg.

Resolution: 0.1, 0.01, 0.001

12

Pulp

Tes

ting

Inst

rum

ents

Pulp Testing InstrumentsPulp Testing Instruments


MODEL No. FBI-PT 2000 B i,ii


MODEL No. FBI-PT2002


LABORATORY BEATER

A. LABORATORY VALLEY BEATER

For laboratory beating of pulp under standardized conditions, to determine the behavior of pulp when subject to define beating schedule. This beater is suitable for routine checking of pulp in laboratory. Net volume 25 liters of 680 g bone-dry pulp at 2-2.5% concentration. Beater roll speed 500 rpm. Motor with V belt drive provided.

B. LABORATORY BEATER (PFI MILL TYPE)

High precision & best beater for processing pulp prior to information of hand sheets, in order to determine the behavior of pulp when subject to define beating schedule. This beater is ideally suitable for research purpose and routine checking of small quantity of pulp in laboratory. Capacity 5-40 gm of oven dried pulp with consistency of 5-50%, beating time 2-10 minutes depending upon the pulp quality. Beater roll and bed plate independently driven. Roll revolution counter, Variable beating pressure and variable peripheral speed beater roll/housing.

i. With MANUAL LIFTING of beater roll and predetermined Digital Revolution Counter.

ii. With PNEUMATIC LIFTING of beater roll and predetermined Digital Revolution Counter.

C. HOLLANDER BEATER

For uniform treatment of pulp under standard condition. Tub volume 200 liters, 5 kg bone dry pulp at 2-3% concentration. Provided with motor and V belt drive. Recommended drum speed 300 rpm.

i. 1 Kg. Capacity

ii. 5 Kg. Capacity

iii. 15 Kg. Capacity


LABORATORY ROTARY DIGESTER

For producing pulp from various fibrous material under specified and control under pressure, 2temperature and time, Maximum pressure 15 kg/cm . Electric heating elements with logic

controls in temperature control through PID system, which precisely maintain the cooking temperature. Bourdon Pressure and Temperature Indicator are provided. 4-20 mA output is optional.CAPACITY : 15L, 25L, 50L.Optional:

o i. Digital Temperature Indicator cum-controller. Range : 50 to 250 C. ii. Microcontroller based PID temperature indicator cum-controller-with facility of

more detailed pre-programming to control the boiling sequence.

A. STFI Type (Glycol Bath) For laboratory production of chemical pulp. Provided with six 3autoclaves, pressure tested, each of 2.5 cm rotate in heated poly glycol bath and suitable for

300/350 gm bone-dry wood. Heating elements provided with two stage heater capacity 7.5 Kw each Digital temp Indicator-cum-controller precisely control the

Otemperature range 50-250 C. Drum rotation approximate 3 rpm, max 2working pressure 15 Kg./cm

B. Glycol Bath with 8 autoclaves of 0.2L rotating in a Glycol bath. For material available in limited quantity. Designed for a pressure of

O2MPa and a temperature of 200 C. Heating element 4KW, Temperature displayed digitally

Optional : i. Microprocessor based PID temperature indicator

cumcontroller. with facility of more detailed pre-programming of boiling sequence.


LABORATORY PULPING UNIT (AUTOCLAVE DIGESTER)

APPLICABLE STANDARD

VALLEY BEATER : SCAN C 25 : 76, TAPPI T 200, CPPA C.2, ISO 5264/1

PFI MILL TYPE : SCAN C 24 : 67, TAPPI T 248 CM 74, CPPA C.7, ISO 5264/2-1979

MODEL No. FBI-PT2002A


13

Pulp

Tes

ting

Inst

rum

ents





For wet grinding and defibrating chips or experiments pulp making. Utilized for developing pulping processes and strength development studies on raw steamed or semi-chemically cooked chips, fully cooked pulp, cooked straw, waste paper and many other materials. Dics dia 304 mm, speed 1500-3000 rpm. With motorized screw feeding arrangements.

Option: Extra Grinding Disc.

LAB DISC REFINER


LABORATORY STRAINER

A. Vibration Strainer (Johnson Type) For separating shives and Fiber flock from a continuously fed pulp sample. Design approved by the Technical section of the British Paper & Board Industry Federation. Average capacity : 5 Kg. dried pulp per hour. Strainer area 500 x 240 mm. Driving motor included.

B. Laboratory Strainer (Weverk Type) This a Packer type strainer for straining pulp from a digester while diluting water is being added. The stainer consists of a strainer vat of volume 20L with a stirrer, the strainer plate with slot width 0.15mm and a collecting vat . Motor- driven eccentric for diaphragm actuations .

Optional : i. Strainer stand ii. Strainer slot width of 0.2,0.3,0.4 & 0.5mm also available.


For producing pulps by cooking wood chips in a manner similar to a commercial digester. Ensure good repeatability of results. Heating effected through electrical heaters. Centrifugal type circulation pump provided. Voltage, current, heating rate are indicated through digital readouts.

2 ODigester Volume : 20 Liters. Max Pressure 20 Kg/cm , Max Temperature : 200 C, Pump capacity 20 liters/min.A circulation digester consists of a cooking vessel with chip basket, a heat exchanger

with circulation pump, separate vessel with independent heating system for preheating the cooking liquor and all necessary piping. The exchanger and vessels are equipped with heating elements and PID logic controllers.

Optional :

i. Microprocessor based PID temperature indicator cum controller - with facility of more detailed pre- programming of boiling sequence.

LABORATORY RESEARCH DIGESTER




For determining the shive content in ground wood pulp. Designed in accordance with "Second Report of the Pulp Evaluation Committee to the Technical Section of Paper Makers Association". Number of slots 756, width 0.15 mm. Rubber diaphragm actuation by electric motor and eccentric mechanism, driven at 690-700 rpm. With stand. A calibrated flushing nozzle, located in the centre of the fractionating screen, provides excellent circulation and keep the slots clean. Water flow rate

38.6 dm /min. at 123.6kPa.

FIBER FRACTIONATER - SOMERVILLE TYPE

APPLICABLE STANDARD

TAPPI UM 242

14

Pulp

Tes

ting

Inst

rum

ents


MODEL No. FBI-PT 2008 B,C



LABORATORY SHEET PRESS

For pressing and de-watering the sheet quickly made of sheet making machine

A. Hydraulic Type : Manually Operated and plunger type pump employed for raising the 2pressure gradually. Working pressure 3.5 kg/cm , maximum sheet size 165 mm diameter.

B. Pneumatic Type : Pneumatically operated sheet press control panel with 12 & 6 minutes pressing with adjustable timing for two sequential pressing of sheets. Working pressure 3.5

2kg/cm maximum sheet size 165 mm diameter. Suitable for other sizes : 160,165 & 200 mm diameter.

C. Square Type : Pneumatically operated sheet press; control panel with 12&6 minutes pressing with adjustable timing for two sequential pressing of sheets. Pressing force maximum 16 kN. Maximum sheet size 330x350 mm.

APPLICABLE STANDARD

SCAN C 26:76, M 5:76, TAPPI T205 OM88, CPPA C.4, ISO 5269/1


BEATING & FREENESS TESTERS-SCHOPPER RIEGLER TYPE

For measuring the drainage capacity of beaten pulp and checking the progress of beating process

A. Model with provision of Mechanically Controlled valve lifting and Plexiglas measuring cylinder for Scnopper Riegler value with standard wire mesh as per SCAN

B. Model with provision of Motorized Controlled valve up and down lifting with a single and plexiglas measuring cylinder for Schopper Riegler valve with standard wire mesh as per SCAN

C. Model with provision of Pneumatically Controlled valve lifting and Plexiglas measuring cylinder for Schopper Riegler valve with standard wire mesh as per SCAN

APPLICABLE STANDARD

SCAN C19:65, M4:65, ISO 5267/1, MERKBLATT V7/61, APPITA P 205


LAB HYDRAPULPER

A. HIGH CONSISTENCY PULPER For making pulp, minerals fibers pulp like mica, asbestos etc. Also used for mechno-chemical pulping. Heating System with adjustable Thermostat Control Supplied with standard electric motor propeller V belt drive to circulate the stock effectively.All wetted parts 304 Stainless Steel.

Consistency Range-5.5 to 15%, Litre Capacity -10,18, 30, 5, 100.

B. FORMAX TYPE PULPER For rapid defibering of virgin and secondary fibers with a range of 30 to 350 A.D. grams of fiber. Efficient, Portable and Inexpensive, this unit is a research and

development tool in a laboratory.

Capacity - 10, 18, 25 Ltr., Consistency Range- 2% to 10%

C. PRESSURISED TURBO HYDRO PULPER for pulping and cooking of pulp at the same time with cooking pressure and temperature indicator and controller.

Option :

i. Digital Temperature indicator cum controller

with AC/DC variable drive.



BEATING & FREENESS TESTER - CANADIAN TYPE

For measuring the Canadian Freeness number which is a measure of the drainage capacity of different pulp types. It is a useful index of the amount of mechanical treatment given to the pulp with standard screen plate and Plexiglas measuring cylinder for CSF value

APPLICABLE STANDARD

SCAN C21:65, M4:65, TAPPI T227, CPPA C.1, ISO 5267/2, APPITA/AS 1301.206 m88 2010FBI-PT


MODEL No. FBI-PT 2007B

15

Pulp

Tes

ting

Inst

rum

ents




LABORATORY MECHANICAL CRUSHER

For preparation of wood meal of wood samples for chemical analysis and grinding virtually any material to produce a finely meshed sample. For blade rotor dia 200 mm operating at 400 to 800 rpm. Inter changeable screen mesh available as per requirement.


WOOD CHIP CLASSIFIER

For rapid and reproducible analysis of chip. Recommended dry content of the wood 40 to 70%. Screening time 10 min., Stroke 120 mm., Frequency 2.7 Hz, Sample Quantity 8-10 L with stackable 5 nos. of trays, Screen size 0.65x0.4m.Recommended standard screens as per TAPPI & SCAN.No. 1, with 45 mm diameter holes, triangular pitch 60mm .No. 2, with 8 mm wide slots.No. 3, with 7 mm diameter holes, triangular pitch 8.5 mm.No. 4, with 3 mm diameter holes, triangular pitch 8 mm.No. 5, dust pan.Other hole diameter and slots width are optional.

For preparation of chips from wood, for lab and educational purpose. Capacity max 500 kg/h chips. Chipping disc 350 diameter, Speed 710 rpm. Input tube diameter 80 mm set at and angle of

O about 50 .Capacity : Max 500 Kg/h chips suitable for laboratory investigations. Adjustable counter cutter.


LABORATORY CHIPPER


For faster drying and conditioning the sheet after press. The design is accordance as per the Technical Section of British Paper & Board Industry. Heating unit included and thermostat control provided for temperature adjustment and quick drying.

Optional: Digital temperature indicator cum controller

SHEET DRYING CABINET

APPLICABLE STANDARD

SCAN CM40, CPPA D.25U, TAPPI T16 sm45



FIBER CLASSIFIER (BAUER Mc NETT TYPE)

For investigating the fiber length distribution in pulp. Each unit provided with an electric motor for driving the rotor and is fully self-contained. All units easily combined in cascade mode. The screen frames are clamped pneumatically by compressed air or hydraulically by water pressure or spring clamping. Each unit includes a screen frame with a sieve designation available according with the ASTM sieve numbers 30,50,100 & 200 as standard.Option : Interchangeable screens available for mesh size 10,20,28,48,100,150

& 200 & other mesh size also available.

APPLICABLE STANDARD

SCAN M6:69, TAPPI T233, MODEL No. FBI-PT 2015

MODEL No. FBI-PT2014

16

Pulp

Tes

ting

Inst

rum

ents





RAPID SHEET DRYER

For shorting the drying time of wet pulp or paper samples before determining the dry weight of moisture content. Provided with flat heating elements. Suitable for sheet size max. width 250 mm, max length 300 mm, temperature

O Oadjustable over a wide range, upto maximum of 180 ±10 C.

For drying the lab pulp hand sheets or paper sample (upto 56 sheets). The process helps to prevent wrinkling and shrinking in the dried samples. It also permit convenient and rapid insertion of the sheets.

A. Manually Operated : Drum Dia 500 mm, width 600 mm

B. Motorized Operated : Drum Dia 800 mm, width 700 mm


SHEET DRYING CYLINDER

For quick determination of pulp/stock consistency. The instrument is manufactured in accordance with the second report of the pulp evaluation committee to the Technical Section of British Paper & Board Industry Federation.Option :

i Vacuum pump, as an optional accessoryii Rapid sheet dr ier for shor ten ing the dry ing t ime, as an opt ional

accessory Couch plate :


CONSISTENCY DETERMINATION APPARATUS

A. For studying and comparing fibre materials, for the effects of beating, surface structure and formation. Has built-in Fresnel lens behind the screens, giving a bright and clear picture. Lighting and the transformer as a variable output voltage outstanding stability and smooth control. Magnification rage 100x -800x

B. FIBER LENGTH ANALYSER (COMPUTERIZED)

For analyzing the fiber through the Digital Optical Analyzers. The image of the fiber of pulp is processed through the computer to analyze. The fiber length and size can be best calculated and the monitoring and data storage is done in the computer.

FIBRE QUALITY ANALYZER with following measurements:

Fiber length according to TAPPI and ISO standards

Curl Coarseness Wood species (SW/HW) ratio Fines content

Fiber width, vessel cells and kink measurements

Regulator unit Display, keyboard and mouse


MICRO FIBRE PROJECTOR

APPLICABLE STANDARD : SCAN M-1


For standardized disintegration of pulp to a homogeneous suspension. Pivoted drive unit with stainless steel propeller and shaft. The propeller is driven by electric motor via stepped timing belt, which ensures a direct drive without slippage.

Option : Preset impulse counter on front panel for setting desired number of revolution. Digital preset pulse counter on front panel for setting number of revolution. Pulp container with heating elements and Thermostat control.

PULP DISINTEGRATOR

APPLICABLE STANDARD

SCAN C 18,M2, TAPPI T205, CPPA C.6, ISO 5263, APPITA/AS 1301.215MODEL No. FBI-PT 2020

APPLICABLE STANDARD : SCAN C 26/M5

APPLICABLE STANDARD : TAPPI T 240 om-02


17

Pulp

Tes

ting

Inst

rum

ents



For measuring the initial wet web strength and elongation of newsprint strip or pulp. Microcontroller based system with digital LCD display with automatic return rupture. Clamping length 50 & 100 mm, wire covered clamps for 20 mm wide strips, Max. stroke 30 mm. Deformation speed 1.5± 0.1 mm/sec. Measuring range 0-19.999 N. With inbuilt/external printer for printouts of Initial Wet Web Tensile Strength, Stretch and Wet Web Tensile energy absorption. Print report consists of the average tests, Lot No., Serial No., Date, Time and GSM and other feeded parameter.

Option : Graphic recorder.

Ideally suitable for field-testing of the pulp sheet rapidly for physical strength and effect of dies & pigments.

Option for all model :

White Water Re-circulation SystemRound cutter for 200 cm2 areaStock Divider Pulp suspension & distribution unit.Drying Rings of Thermostatic PlasticDrying Plates of Stainless SteelStandard blotting Paper as per TAPPI standardRubber diaphragms sheet for Automatic Sheet PressRubber diaphragms sheet for couchingRubber sealing


WET WEB TENSILE STRENGTH TESTER


PORTABLE SHEET FORMER

APPLICABLE STANDARDS

SCAN C 31/M11, C 35/M12, TAPPI T 821, APPITA P 430


For production of laboratory sheets for physical tests. The design of the drainage system provides a uniform flow across the entire wire, thus permitting an exceptionally uniform sheets.

A. Hand sheet former (Model SCA Type) : For production of circular sheets. With accessories 2complete. Sheet size : 165 mm dia = 214 cm Trimmed size : 200 cm2, manual stirrer,

complete wire frame, couch weight, couch plate, wire tightening frame, drying plate and drying ring are included in delivery.

B. Hand sheet former (Model KCL Type) : For production of square sheets. Size : 165x165 2mm. Trimmed size : 200 cm , Manual stirrer, complete wire frame, couch weight, couch plate,

wire tightening frame, drying plate and drying ring are included in delivery.

C. Semi-Automated Sheet Former : For producing the pulp sheet rapidly for physical strength test. In comparison to the standard sheet former, this apparatus reduces the time factor, increases the output, improves the reproducibility, reduces the operator's influence and fatigtie without detriment to the final product, Stirring in the apparatus is an automatic function by use of compressed air, whilst couching is effected by means of pneumatic fixture. Suitable for producing sheet size : 165 mm diameter.

D. Semi-Automated Sheet Former : (Model 2005C) with white Re-circulation system, Pneumatic sheet press & Rapid dryer mounted on base table complete accessories.

E. Automatic Sheet Former (Microcontroller Based) Complete with sheet press & rapid dryer The automatic sheet former consists of a sheet forming and drying/pressing section. Keypad entry of all sheet-making parameters. If required a measured volume of pulp suspension of known consistency may be selected equal to the required dry weight of hand sheet is by placing a blotting paper on sheet and then applying an even pressure using lightweight couch roll. The sheet address to blotting paper, which is then transferred to on vacuum dryers for pressing and drying. An alarm is given after the specified drying time has been reached. The finished hand sheet can be tested immediately, or after conditioning.

HAND SHEET FORMERS

APPLICABLE STANDARD

DIN 54358, APPITA P 203,

KCL SCAN C 26M5,

SCA TYPE : TAPPI T-205, ISO 5269/1, CPPA C.4, SCAN C26,

TYPE :


MODEL No. FBI-PT 2023 D, E


18

Pulp

Tes

ting

Inst

rum

ents




To study the dinking effect of printed recycled paper by floatation method in laboratory. Stainless steel container capacity 25 liter specially designed aerator with variable speed and digital revolution counter. Can be used in conjunction with laboratory Pulper and screw press (de-watering unit) to conduct extensive testing of recycled fiber system.

Option : High density Pulper FORMAX TYPE 10Ltr, 15Ltr capacity.

FLOTATION CELL(LAMORT TYPE)


PULP COLOR REVERSION APPRATUS

Designed for rapidly determining the Viscosity of glue, paint & pulp.APPLICABLE STANDARDS : TAPPI T697


FORD CUP


Designed for rapidly determining the yellowing properties of different types of pulp grade. Use in studies to optimize both cooking and bleaching processes as well as pulp mill quality control. The apparatus consists of stainless steel vessel that holds thirty- two 25 cm2 pulp specimens. The insulated vessel is heated with an

0external hot plate as an optional. The reversion obtained after one hour at 100 C and 100 % RH correlates with natural reversion.

APPLICABLE STANDARDS : TAPPI T 260, CPPA E.4P


LABORATORY HI-DENSITY CENTRI-CLEANER

LABORATORY PRESSURE SCREEN WITH SLOTTED BASKET



LABORATORY SCREW PRESS (DE WATERING UNIT)

Compression cum de watering unit with variable speed compression screw pressurized de watering of wood chips to get less moisture wood chips for mechanical pulping the wood chips compressed by specially designed screw press under 10000 PSI pressure zone. This action removes the moisture and un avoidable color produced the 80% moisture free wood chips an efficient and cost effective system for pulp & paper research to get high quality of mechanical pulp, compressed wood chips reduced the cost of chemical and energy also improved the fiber washing, de watering, bleaching and high-density storage techniques. This action removes the moisture and an avoidable color and produced the wood chips with a minimum moisture contents. The compressed chips quickly absorb the chemicals and also good drainage property, Screw Press is an important pulp research tool for exploring fiber washing, de-watering, bleaching and high-density storage techniques. The press is designed to de-water fibrous slurries in automatic, continuous operation complete with variable speed drive all parts in contact with the pulp are made of stainless steel.

A. For wood chip : Complete with AC variable drive capacity 5 Kg./hour.

B. For waste paper : Complete with AC variable drive capacity 2 Kg./hour.


The Kappa number is the amount of potassium permanganate solution, in mL, consumed by one gram of moisture-free pulp under the conditions specified above.

· Propeller stirrer made from Teflon coated material

· Constant temperature bath of 25 °C in the reaction vessel

· Reaction beaker made of glass with special design, 2000 ml

· 3 Automatic burettes, 50 ml, graduated to 0,1 ml.

APPLICABLE STANDARDS: TAPPI T 236



KAPPA NUMBER ANALYZER (Fully Automatic System)

19

Pack

agin

g Te

stin

g In

stru

men

ts





Packaging Testing InstrumentsPackaging Testing InstrumentsCATALOGUE NO. FBI-PT 3000

ELECTRONIC BOX COMPRESSION TESTER

A. DIGITAL MODEL : Heavy Duty tester to determine the compression strength of corrugated & non-corrugated boxes. The instrument provide the Digital Display of load and elongation. Complete with memory for retaining peak value., automatic or normal zero setting, AC/DC drive provide the variable compressive speed overload and over travel protection facility. Measuring range 1000 & 2000 Kg. Platen size 500mmx500mm, 1mtrx1mtr.

B. MICROCONTROLLER BASED SYSTEM : Heavy duty tester to determine the compression strength of the corrugated box. Load range selected to completely collapsed as peak load or may be with pre-determined load for a given period to evaluate stacking load. Imported AC/DC drives provide the variable compressive speed. Measuring range 1000 Kg. or 2000 Kg. Platen size 500mmx500mm, 1mtrx1mtr.

C. COMPUTERIZED BOX COMPRESSION TESTER - Monitoring is done through the FBI MONITOR SYSTEM which is a PC-based laboratory data acquisition system designed around the unique operating system such as WINDOWS 9X, ME & XP. The software makes automatic calculations through COMPUTER MICROPROCESSORS and presentation of measured strength values, arithmetic mean, peak value, selection and conversions of units of Kgf or K N. The graphical strength presentation of the test series Vs time is there. All of which ensure accurate and stable test weights. Measuring range 1000 Kg. or 2000 Kg. Platen size 500mmx500mm, 1mtr x 1mtr. Labview based computer software for visual


Designed to determine the wear and durability of paper and board, ceramics, plastic textile, rubber, flooring and painted lacquered and electroplated surface. Electrically driven with predetermined cycle counter.

Option : With digital predetermined cycle counter. Standard Abrasion test wheels.

ABRASION TESTER

APPLICABLE STANDARD

ASTM D 1630, ASTM D1044, TAPPI T476


LABORATORY HEAT SEALER

To perform heat-sealing of samples. With adjustable jaw pressure and temperature control from O ambient to 400 C. Teflon coated ceiling bars, sealing area 5x180mm, changeable sealing faces,

adjustable sealing pressure, sealing time variable by timer setting 0-99.99 seconds. Maximum 2ceiling force 28 kg/cm .

APPLICABLE STANDARD

ASTM F2029


LABORATORY SEAL STRENGTH TESTER

To check evaluate the interfacial adhesion properties of flexible packaging material peak values, automatic or normal zero setting, overload and over travel protection facility.

Load cell range : 0-5000 gm.

APPLICABLE STANDARD

FEFCO No.50, ISO 2872, TAPPI T804, ASTM D642

APPLICABLE STANDARD: ASTM F 1921, F 2029,


GELBO FLEX TESTER

APPLICABLE STANDARD

ASTM F 392, ISO 9073-10, IST 160.1MODEL No. FBI-PT 3004

For measuring the PIN HOLE resistance against air and moisture. The Particle Counting Chamber for use with the Gelbo Flex from non-woven materials in a 30 second time period of flexing. Using ISO 9073-10, FIBRETEC have designed the Gelbo Flex Tester with Particle Counter for measuring the linting of non-wovens in the dry state. This test can also be applied to other textile materials.

20

Pack

agin

g Te

stin

g In

stru

men

ts


PAPER CORE COMPRESSION STRENGTH TESTER

The paper tube crush tester has been design as a cost effective machine to measure the strength of manufactured paper cores up to a crushing force of 10 kN. The crush test samples can be a slices of the paper core ranging from 25 to 100 mm wide and upto 300 mm in diameter.A. ANALOG MODEL: For testing the core collapsing strength. Has adjustable testing area to accommodate specimen sizes and shapes. Pneumatically operated piston to apply the pressure. Maximum pressure to crush the test sample recorded on a gauge with peak pointer.

B. DIGITAL CORE COMPRESSION STRENGTH TESTER: Used for testing core collapsing strength through a motorised operated piston to apply the pressure to crush the test specimen. The maximum peak crush value is displayed on a digital load indicator. Range 500 to 1000 kgf.

For producing a sample to evaluate flat crush resistance of corrugated medium. 'A' fluting rolls are Oheated upto 176 C and maintained a constant temperature by thermostatic temperature

controller. One roller is motor driven at 4 rpm while the other is free to rotate with a minimum of friction or other resistance. Option: Digital Temperature Indicator cum controller. Other Flute sizes available on demand


CONCORA MEDIUM FLUTER

APPLICABLE STANDARD

SCAN P 27, TAPPI T 824, T-809, CPPA D24, ISO 7263, AS/NZ 1301.434, DIN 53143


CARTON BOARD CREASER

For testing the creasability of carton board. Ensure fault free folding. In addition it gives the carton makers a guide to correct settings for cutting and creasing equipments so that the trial and creasing error is reduced and the production of the faulty cartons be avoided. Suitable for board caliper 300-1000 Micron (0.012-0.040 inch) 18 creasing channels between 1- 4.06 mm (0.04-0.016 inch) variable crease depth.

APPLICABLE STANDARD

BS 4818,

For determining the impact strength of the boxes/containers made from cardboard, plastics or wooden materials. Different models available in capacities ranging from 600-6000 pounds with necessary modification in respect of track length, dolly size etc. Ruggedly built design to withstand continuous usage. Has automatic release mechanism. Complete with traveling chain driving motor.


IMPACT TESTER-CONBUR INCLINE TYPE




APPLICABLE STANDARD

FEFCO No.3,

APPLICABLE STANDARD

AS 2001.4.21


A. ELECTRO DYNAMIC SHAKER Force Rating : 100Kgf Peak SINE ForceMax. Acceleration : 65”G” on the bare tableFrequency Range : 5Hz to 2000Hz Armature Table : 125 mm diameter / Circular Insert Pattern, M 8, 50mm pitchCooling : Through low noise Centrifugal Cooling Blower

PACKAGE SHAKER (VIBRATION TABLE)



21

Pack

agin

g Te

stin

g In

stru

men

ts




PUNCTURE RESISTANCE TESTER

For determining the puncture resistance of corrugated board by measuring the energy required to puncture it. Interchangeable weights supplied to cover four energy ranges i.e. 0-5, 0-10, 0-20 & 0-36 Newton Meter.

APPLICABLE STANDARD : DIN 53142, SCAN P23, ASTM D781, TAPPI T 803


APPLICABLE STANDARD : ISO 2248 A, AS 2582.4

AUTOMATIC DROP TESTER

To determine the ability of package to with stand the rigors of handling by people and machinery in the distribution environment. Control and hoisting features facilities in all respects of operation : drop height setting and test reset. The equipment has steel base plate complies with industry standard. Adjustable maximum and minimum height for loading and dropping via chain hoist for positioning. Maximum drop height 2.5 mt and lifting capacity 150 Kg. Steel Base for test surface 1000x1500x25.

Option: Motorized lifting of package & solenoid operated release system. Heavy weight version upto 500 lbs capacity.


APPLICABLE STANDARD : ISO 7765, ASTM D 1709, AS/NZS 4347.6

FALLING DART IMPACT TESTER

The falling dart impact tester covers your determination of the energy that causes Polyethylene film to fail under specified conditions, with the impact of the free falling dart. This energy is expressed in terms of weight of the dart falling from a specified height, which would result in 50% failure of specimen tested. The unit employs a dart, with a 38 mm diameter hemispherical head, dropped from a height of 660 mm.Option: Motorized lifting of package & solenoid operated release system. Heavy weight version upto 500 lbs capacity.



INK RUB TESTER

The ink rub tester is designed to determine the quality of adhesion and scuff resistance of ink to paper surfaces. Dry and wet rub can be performed on the ink rub tester. The method of the preparation is that a 2 lb or 4 lb weight with a clean white board is swept across the test piece for a set number of times, then closely examined. The rate of rubbing (no. of strokes) can be set by the pointer as desired. Abrasion speed approx. 43 cpm, arc motion approx.21/4 inch, counter 0 to 9999 cpm.


Digital Switching Power Amplifier specifications:5 KVA, Class D, PWM technology, Modular construction, Air-cooled modules, Hybrid power devices (HEXFETS), Single Power Module capacity will be min 5 KVA or more.System control unit with safety interlocksComputer connectivity, computer should be provided by the buyer with the specification at least 20GB HDD, 16x DVD writer, windows 98 operating system.Available with Sweep, Sine and discrete mode of testing.Piezo Electric Accelerometer (PCB / Kistler) for Vibration Control and Monitor

B. MECHANICAL PACKAGE SHAKER (VIBRATION TABLE)For laboratory investigation of the resistance of packages and products to vibrations. Simulates the effects, which occur during transports by rail or other means. Executes a harmonic sinusoidal vertical or horizontal motion or a combination of both. The servo controlled DC motor maintains the preset vibration frequency independently of the size of the load. Maximum load 400 Kg, vibration frequency max. 13 1/3 Hz. Amplitude 0-12.7 mm (peak to peak 25.4 mm) Table area 1.25x1.5 m.

APPLICABLE STANDARDS: ISO 2247, DIN 55443, ASTM D999,FEFCO No.52


22

Surf

ace

Coat

ing

Test

ing

Inst

rum

ents


Surface Coating And Printability Testing InstrumentsSurface Coating And Printability Testing InstrumentsCATALOGUE NO. FBI-PT 4001

STANDARD PAPER TESTING WAXES

For determining the resistance to picking of the surface of the paper. Wax cross section area 18x18 mm. Each wax is of hard resin non-oily type. Each box contains 7 sticks of same number.Used in conjunction with the wax pick test method TAPPI T 459 om93, ASTM D2482. Sticks numbered from 2A to 23 A.


LAB AIR KNIFE COATER

For coating the sample sheet materials in (A4) 10"x12" size. The air-knife design of the coater guarantees uniform coating of the coating medium on to the best specimen. Suitable for coating of latex, ink, lacquer and plastic dispersions etc. Air pressure adjustable by a control knob. Air knife is adjustable in height and direction.


For laboratory testing of paper and ink in simulate actual condition as in printing. The equipment is designed to determine the accurate simulation of offset letter press printing, flexo and gravure printing on laboratory scale. The unit tests the paper surface strength abrasion speed and variable printing pressures printing format 50x270 mm.

Option : Linking apparatus for even distribution of ink onto printing disc. The top roller is made of polyurethane soft rubber and is resistance to UV and other conventional link.

FIBRETEC PRINTABILITY TESTER


LABORATORY CALENDER

For performing calender experiments and trials in the laboratory environment. Provided with three roller stacks with a face width of 300 mm. Adjustable line pressure 0-100 kg/cm bymeans of

hydraulic cylinder and electrically driven operated pump. Electrically heated and thermostatically Ocontrolled top roller of size 150 mm diameter. Temperature range ambient to approx.100 C.

The 180 mm diameter intermediate roller is of paper wool. The 150 mm bottom roller is driver. It is

supplied with unwind stand, unwind shaft and brake. Alternative configurations as per requirements possible.

Designed for the application of the paints, varnishes, adhesive, liquid printing inks and many other surface coating which require sampling under accurately controlled conditions.. With variable coating speed between 2 and 15 mm/min. including 7 Ns coating rods. A with coated area of 27x15 cm (Standard)


LAB BAR COATER

(set of 7 No. Rods) Suitable for Bar coater or K control coater


COATING RODS





23Environmental Testing InstrumentsEnvironmental Testing InstrumentsCATALOGUE NO. FBI-PT 5000

ENVIRONMENT CHAMBER

O O OFor conditioning of the samples before test. Temperature 10 to 60 C. Accuracy ± 0.5 C. Humidity range 30-90%. Accuracy, " -y ± 3% inner chamber size 700 x 450 x 450 mm. Complete with sealed unit and contact thermometer.

Option : Digital temperature indicator cum controller.

For moisture determination of Pulp, Paper & Paperboard etc. Temperature range from O O room temperature to 250 C thermostal accuracy within ± 1 C.AirCirculationbyfan.

Option : Digital temperature indicator cum controller


LABORATORY OVEN

For measuring pH value of the pulp solution or other similar material. Measuring Range : 0-14 pH. Readout 3.5 digits.


PH METER

OFor incineration of solids. Temperature range upto 1000 C Working temperature O930 C. Temperature controlled by energy regulator complete with pyrometer and

thermocouple.

Option : With digital temperature indicator-cum controller.


MUFFLE FURNACE


For incubating BOD samples of effluent and others.O ODouble walled, heavily insulated. Temperature ranges 5 C. 50 C.

OAccuracy ± 0.5 C Automatic control. Double door construction

Inner chamber size 33"x20"x16.5".

Inner chamber size 34.5"x22.5x"22.5"

Inner chamber size 36"x26"x23

Option : Digital Temperature Indicator cum controller

BOD INCUBATOR






23Environmental Testing InstrumentsEnvironmental Testing InstrumentsCATALOGUE NO. FBI-PT 5000

ENVIRONMENT CHAMBER

O O OFor conditioning of the samples before test. Temperature 10 to 60 C. Accuracy ± 0.5 C. Humidity range 30-90%. Accuracy, " -y ± 3% inner chamber size 700 x 450 x 450 mm. Complete with sealed unit and contact thermometer.

Option : Digital temperature indicator cum controller.

For moisture determination of Pulp, Paper & Paperboard etc. Temperature range from O O room temperature to 250 C thermostal accuracy within ± 1 C.AirCirculationbyfan.

Option : Digital temperature indicator cum controller


LABORATORY OVEN

For measuring pH value of the pulp solution or other similar material. Measuring Range : 0-14 pH. Readout 3.5 digits.


PH METER

OFor incineration of solids. Temperature range upto 1000 C Working temperature O930 C. Temperature controlled by energy regulator complete with pyrometer and

thermocouple.

Option : With digital temperature indicator-cum controller.


MUFFLE FURNACE


For incubating BOD samples of effluent and others.O ODouble walled, heavily insulated. Temperature ranges 5 C. 50 C.

OAccuracy ± 0.5 C Automatic control. Double door construction

Inner chamber size 33"x20"x16.5".

Inner chamber size 34.5"x22.5x"22.5"

Inner chamber size 36"x26"x23

Option : Digital Temperature Indicator cum controller

BOD INCUBATOR



MODEL No. FBI-PT 5003MODEL No. FBI-PT 5004


The Electronic Density meter provides a highly accurate calculation of specific gravity of almost any object of any shape. The revolutionary compact design makes specific gravity measurement simple and accurate.SpecificationsType DA-100MMeasurement range 0 ... 3 g/cm3 Accuracy 0.001 g/cm3Temperature control Yes (Peltier) Temperature compensation NoTemperature range 15 ... 40 °C Sample volume 1 mL (minimal)Typical measuring time 20 s Sampling pump Option (ASU-100)Number of measuring methods 1Special applications Concentration of aqu. solutionPrinter interface : Yes


MUFFLE FURNACE


DENSITY METER


24




Fibretec Automation SolutionsFibretec Automation SolutionsCATALOGUE NO. FBI-PT 6000

For measuring Bursting Parameters, Tensile Parameters, Thickness, Grammage, Tear Parameters and many more through a single computer interface. The PC Lab Automation Software "FIBRETEC FBI MONITOR SYSTEMS" is used to collect data and controlling the autoline instruments. Monitoring is done through the FBI MONITOR SYSTEM which is a PC based laboratory data acquisition system designed around the unique operating system such as WINDOWS 9X, ME & XP. The software has connectivity from 1 to 16 individual test stations. User friendly software guides the operators through all steps of program selection, parameter modification and sample test to minimize to human error during test. The FBI MONITOR have the capacity to display, store and edit up to 500 readings and include statistics such as Averaging, Standard Deviations, high low readings which can be printed in a structured report. All the digital instruments are equipped with communication ports able to identy the data through instruments ID Port is

LABORATORY AUTOMATION AUTOLINE 2000


For controlling the basis weight of paper machine. The extreme accuracy needed in basis weight control is achieved by a step-motor driven, backlash-free rotary actuator. It performs precise, minimal changes in calve opening with high repeatability and resolution. The rotary actuator is electrotechnical unit. When it's time to change grades and set a new basis weight, the control unit and the actuator quickly turns the valve to a new opening range with minimal downtime. (Adjustable speed with time duration; use RS232 and PC). Equipped with pulse train and time duration interface, Fibretec Basis Weight Valve System is compatible with any process computer output. The control unit operates in a response to a control command from a computer or an (open and close) and a digital position display. The DCS operation is activated in the "automatic" mode as a standard. Analog output (4-20 mA) can be used in the DCS to indicate valve position. Available in different size : 2" size, 3" size, 4" size, 5" size, 6" size, 10" size, 16" size valcces made of SS-316. Controlling upto 0.5 GSM Gear ratio 1:44 steps 3000, limit switches 2, O/p Torque 200, 400, 600.

Option :

i. Micro controller based automatic controller for above valves.

ii. Imported CF8 & CF8M V Knotch Ball Valve for different sizes from 2" to 10" available.

BASIS WEIGHT CONTROL ON LINE AUTOMATION


CONSISTENCY MEASUREMENT & CONTROL

For measuring the Pulp Consistency in a closed loop systems. The o/p signal is an analog current signal 0/4-20 m A proportional to consistency. Consistency Range from 2% to 10% with pulp

O Otemperature from 32 to 200 F. Consistency Transmitter completely made of SS-316.


FIBRETEC AUTO TRACKERS (AUTO GUIDE)

For controlling the paper machine wire or felt path for straight operation. The control palm sensor sense the slightest linear movement and makes correction to stable position by moving the guide roll in the appropriate direction. Maximum housing diameter 220 mm and or 170 mm on the basis of speed (for 700 MPM and 450 MPM). Maximum displacement 80 mm (40+40) palm sensors made up of SS 316.0.

For PID controllers are microcontroller based with a very high performance to price ratio. The product is made to accept all 7 standard thermocouple inputs, PT 100, RTD, 4-20 mA and 0-5V DC inputs. Provision for Zero and Span setting Two alarm set points.


PID CONTROLLERS



APPLICABLE STANDARD : DIN, ASTM,BS

IMPORTED INDIGENOUS

andCertified Products

fibretec product catalog for testing instruments

Documents

adhesive testing instruments

plastic testing instruments

ink testing instruments

footwear testing instruments

range of instruments

rubber testing instruments19

universal testing machines

motorized digital sturdy