fillers & panels crestwoodcatalog...waf3-30 409 waf3-36 458 waf3-39 503 waf3-42 503 waf3-48 545...

FILLERS & PANELS CRESTWOODCATALOG

26AUGUST2019© Dura Supreme Cabinetry 11-i

Angled End Panels 11-14Appliance Panels 11-24Cottage Bead Overlay End Panel 11-22Cottage Bead Panel (Wainscot) 11-25Decorative End Panels 11-9Decorative Angled End Panels 11-15Decorative Panels (Wainscot) 11-26Decorative Overlay End Panels 11-21Door Applied to Panel 11-26Edge Banding, Loose or Applied 11-27End Panels 11-8Fillers (FIllers & Angled Fillers) 11-1Fluted Overlays 11-6J End Panels 11-12Overlays & Fillers (Attached) 11-7Overlays for Fillers 11-4Panels (Prefinished) 11-27Plywood Skins 11-29Refrigerator Panels 11-23Refrigerator Door Panels 11-24Turned Post End Panels 11-19Two Sided End Panels 11-10V-Grooved Wood Panels 11-28Wine Storage Frame 11-24

Fillers & Panels Index


26AUGUST2019 © Dura Supreme Cabinetry11-ii


26AUGUST2019© Dura Supreme Cabinetry 11-1

Cat. Code PriceWall Fillers - 3” WideWF3-12 73WF3-15 73WF3-18 73WF3-21 73WF3-24 73WF3-27 73WF3-30 73WF3-36 93WF3-39 117WF3-42 117WF3-48 149WF3-54 156WF3-57 161WF3-60 161Wall Fillers - 6” WideWF6-12 87WF6-15 87WF6-18 87WF6-21 87WF6-24 87WF6-27 87WF6-30 87WF6-36 117WF6-39 156WF6-42 156WF6-48 175WF6-54 201WF6-57 213WF6-60 213Base Fillers - (34-1/2” High Cabinets)BF3 (30” High) 73BF6 (30” High) 145Base Fillers - (40-1/2” High Cabinets)BF3-40 (36” High) 93BF6-40 (36” High) 165Tall Fillers - 3” WideTF3-84 (79-1/2” High) 182TF3-90 (85-1/2” High) 210TF3-93 (88-1/2” High) 210TF3-96 (91-1/2” High) 210TF3-102 (97-1/2” High) 273TF3-108 (103-1/2” High) 273TF3-120 (115-1/2” High) 294Tall Fillers - 6” WideTF6-84 (79-1/2” High) 252TF6-90 (85-1/2” High) 280TF6-93 (88-1/2” High) 280TF6-96 (91-1/2” High) 280TF6-102 (97-1/2” High) 364TF6-108 (103-1/2” High) 364TF6-120 (115-1/2” High) 392Vanity Fillers (31-1/2” High Cabinets)VF3 (27” High) 73VF6 (27” High) 145Desk Fillers (28-1/2” High Cabinets)DF3 (24” High) 73DF6 (24” High) 145Desk Drawer Fillers 3” Wide5DDF3 (4-1/2” High) 736DDF3 (6-7/8” High) 73Desk Drawer Fillers 6” Wide5DDF6 (4-1/2” High) 876DDF6 (6-7/8” High) 87Boot Bench FillersBBF3 (18” High) 73BBF6 (18” High) 87

90000 - Fillers

• Fillers are 3” or 6” wide solid stock. (No toe space included for base or tall fi llers.)

• Finished on face and one short edge.

• Specify FTSF for Flush Toe on base, tall, vanity and desk Fillers. FTSF adds 4-1/2” to Filler height.

• Specify CTS for width and/or height cut down and indicate needed dimension(s). For Corner Fillers, minimum width of face is 3/4” wide. Clearly specify left, right or both sides to be cut down.

Cat. Code Price90° Wall Corner FillersWCF90-3-30 110WCF90-3-36 131WCF90-3-39 142WCF90-3-42 142WCF90-3-48 156WCF90-3-54 172WCF90-3-57 189WCF90-3-60 18990° Base Corner FillersBCF90-3 (34-1/2” High) 11290° Tall Corner FillersTCF90-3-84 271TCF90-3-90 305TCF90-3-93 305TCF90-3-96 305TCF90-3-102 397TCF90-3-108 397TCF90-3-120 42790° Vanity Corner FillersVCF90-3 11290° Desk Corner FillersDCF90-3 112

Cat. Code Price135° Wall Corner FillersWCF135-3-30 159WCF135-3-36 173WCF135-3-39 189WCF135-3-42 189WCF135-3-48 202WCF135-3-54 219WCF135-3-57 236WCF135-3-60 236135° Base Corner FillersBCF135-3 (34-1/2” High) 159135° Tall Corner FillersTCF135-3-84 328TCF135-3-90 383TCF135-3-93 383TCF135-3-96 383TCF135-3-102 499TCF135-3-108 499TCF135-3-120 537135° Vanity Corner FillersVCF135-3 159135° Desk Corner FillersDCF135-3 159

Filler

90° Corner Filler 135° Corner Filler

Flush Toe Space Filler, FTSF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $67

Filler Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C

NOTE: Rustic Hickory is not available in heights over 96”.


26AUGUST2019 © Dura Supreme Cabinetry11-2

90050 - Angled Fillers - 45 Degrees

• Angle fillers are reversible. When Rosette or Fluting is applied, specify left or right (left shown).

• Base and Tall Angle Fillers do not include a toe space.

• Specify FTSF for Flush Toe on base, tall, vanity and desk Fillers. FTSF adds 4-1/2” to Filler height.

• Overlays are not available.

• Specify CTS for reduced height only and indicated dimension.

ALL OTHER MODIFICATIONS MUST BE QUOTED



Cat. Code PriceAngle Wall Filler 3”AWF3-30 150AWF3-36 164AWF3-39 175AWF3-42 175AWF3-48 185AWF3-54 199AWF3-57 213AWF3-60 213Angle Base Filler 3” (34-1/2” High Cabinets)ABF3 (30” High) 135Angle Tall Filler 3”ATF3-84 (79-1/2” High) 441ATF3-90 (85-1/2” High) 492ATF3-93 (88-1/2” High) 492ATF3-96 (91-1/2” High) 492ATF3-102 (97-1/2” High) 640ATF3-108 (103-1/2” High) 640ATF3-120 (115-1/2” High) 689Angle Vanity Filler 3” (31-1/2” High Cabinets)AVF3 (27” High) 135Angle Desk Filler 3” (28-1/2” High Cabinets)ADF3 (24” High) 135Boot Bench Filler 3”ABBF3 (18” High) 135

Cat. Code PriceAngle Wall Filler 6”AWF6-30 298AWF6-36 326AWF6-39 348AWF6-42 348AWF6-48 368AWF6-54 397AWF6-57 424AWF6-60 424Angle Base Filler 6” (34-1/2” High Cabinets)ABF6 (30” High) 266Angle Vanity Filler 6” (31-1/2” High Cabinets)AVF6 (27” High) 266Angle Desk Filler 6” (28-1/2” High Cabinets)ADF6 (24” High) 266Boot Bench Filler 6”ABBF6 (18” High) 266




90100 - Angled Fillers - 45 Degrees

Cat. Code PriceWall Angle FillerWAF-30 369WAF-36 376WAF-39 406WAF-42 406WAF-48 439WAF-54 460WAF-57 493WAF-60 493Base Angle Filler (34-1/2” High Cabinets)BAF (30” High) 452Tall Angle FillerTAF-84 (79-1/2” High) 650TAF-90 (85-1/2” High) 761TAF-93 (88-1/2” High) 761TAF-96 (91-1/2” High) 761TAF-102 (97-1/2” High) 990TAF-108 (103-1/2” High) 990TAF-120 (115-1/2” High) 1066Vanity Angle Filler (31-1/2” High Cabinets)VAF (27” High) 452Desk Angle Filler (28-1/2” High Cabinets)DAF (24” High) 452

Cat. Code PriceWall Angle Filler 3”WAF3-30 409WAF3-36 458WAF3-39 503WAF3-42 503WAF3-48 545WAF3-54 584WAF3-57 669WAF3-60 669Base Angle Filler 3” (34-1/2” High Cabinets)BAF3 (30” High) 531Tall Angle Filler 3”TAF3-84 (79-1/2” High) 828TAF3-90 (85-1/2” High) 944TAF3-93 (88-1/2” High) 944TAF3-96 (91-1/2” High) 944TAF3-102 (97-1/2” High) 1228TAF3-108 (103-1/2” High) 1228TAF3-120 (115-1/2” High) 1322Vanity Angle Filler 3” (31-1/2” High Cabinets)VAF3 (27” High) 531Desk Angle Filler 3” (28-1/2” High Cabinets)DAF3 (24” High) 531

• Base and Tall Angle Fillers do not include a toe space. • Specify FTSF for Flush Toe on base, tall, vanity and desk Fillers.

FTSF adds 4-1/2” to Filler height.• Specify CTS for width or height cut downs and indicate dimensions.• 10-3/4” face is finished. Specify ISF, Interior Side Finished, to

finish the 4” face.• Overlays are not available.• Fluting and/or Rosette modification is not available.




Interior Side Finished, ISF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $261

WAF, BAF, VAF, DAF, TAF WAF3, BAF3, VAF3, DAF3, TAF3


Wall Application Base Application Wall Application Base Application



90150 - Overlays for Fillers

• For Full Overlay door styles only. Overlay is 1/4” less than Filler width.

• Overlay is profiled to match door style on one long edge and two short edges. Specify S4S to profile all 4 edges - then Overlay is 1/2” less than filler width. Minimum width of S4S Overlay is 2”.

• Overlay shipped loose for field installation.

• Specify CTS for width and/or height cut down and indicate needed dimension(s).

• For larger sizes, see Solid Stock and Profile Shaping.

• Price is for Overlay only. Filler sold separately.


Right Installation Shown

Cat. Code PriceWall Overlay for 3” Wide ApplicationWO3-12 (for 12” high filler) 112WO3-15 (for 15” high filler) 112WO3-18 (for 18” high filler) 112WO3-21 (for 21” high filler) 112WO3-24 (for 24” high filler) 112WO3-27 (for 27” high filler) 112WO3-30 (for 30” high filler) 112WO3-36 (for 36” high filler) 161WO3-39 (for 39” high filler) 189WO3-42 (for 42” high filler) 189WO3-48 (for 48” high filler) 216WO3-54 (for 54” high filler) 247WO3-57 (for 57” high filler) 250WO3-60 (for 60” high filler) 250Base OverlayBO3 for 30” high filler 112Base OverlayBO3-40 for 36” high filler 161Tall OverlayTO3-84 (for 79-1/2” high filler) 275TO3-90 (for 85-1/2” high filler) 315TO3-93 (for 88-1/2” high filler) 315TO3-96 (for 91-1/2” high filler) 315TO3-102 (for 97-1/2” high filler) 410TO3-108 (for 103-1/2” high filler) 410TO3-120 (for 115-1/2” high filler) 441Vanity OverlayVO3 (for 27” high filler) 112Desk OverlayDO3 (for 24” high filler) 112Desk Drawer Overlay5DDO3 (for 4-1/2” high filler) 1126DDO3 (for 6-5/16” high filler 112

Cat. Code PriceWall Overlay for 6” Wide ApplicationWO6-12 (for 12” high filler) 144WO6-15 (for 15” high filler) 144WO6-18 (for 18” high filler) 144WO6-21 (for 21” high filler) 144WO6-24 (for 24” high filler) 144WO6-27 (for 27” high filler) 144WO6-30 (for 30” high filler) 144WO6-36 (for 36” high filler) 209WO6-39 (for 39” high filler) 247WO6-42 (for 42” high filler) 247WO6-48 (for 48” high filler) 266WO6-54 (for 54” high filler) 311WO6-57 (for 57” high filler) 325WO6-60 (for 60” high filler) 325Base OverlayBO6 for 30” high filler 200Base OverlayBO6-40 for 36” high filler 209Tall OverlayTO6-84 (for 79-1/2” high filler) 377TO6-90 (for 85-1/2” high filler) 422TO6-93 (for 88-1/2” high filler) 422TO6-96 (for 91-1/2” high filler) 422TO6-102 (for 97-1/2” high filler) 549TO6-108 (for 103-1/2” high filler) 549TO6-120 (for 115-1/2” high filler) 591Vanity OverlayVO6 (for 27” high filler) 200Desk OverlayDO6 (for 24” high filler) 200Desk Drawer Overlay5DDO6 (for 4-1/2” high filler) 2006DDO6 (for 6-5/16” high filler 200

Overlay Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C

Overlays for Blind Corner Cabinets

• For Full Overlay door styles only.

• Overlay is profiled to match door style on four edges.

• Overlay must be mitered in the field to required width.

• Specify CTS for width and/or height cut down and indicate needed dimension(s).

• Price is for Blind Overlay only. Filler is included with Blind Corner cabinet.

Cat. Code PriceWallsWOBC24 121WOBC30 152WOBC36 179WOBC39 210WOBC42 210BasesBOBC 161

Overlay Cut to Size, CTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C


Shape 4 Sides, S4S . . . . . . .N/C



90160 - Overlays for Corner Fillers

Cat. Code PriceWall Corner Overlay 90°WCO90-3-30 (for 30” high filler) 205WCO90-3-36 (for 36” high filler) 289WCO90-3-39 (for 39” high filler) 336WCO90-3-42 (for 42” high filler) 336WCO90-3-48 (for 48” high filler) 389WCO90-3-54 (for 54” high filler) 443WCO90-3-57 (for 57” high filler) 454WCO90-3-60 (for 60” high filler) 454Base Corner Overlay 90° (34-1/2” high cabinet)BCO90-3 (for 30” high filler) 205Tall Corner Overlay 90°TCO90-3-84 (for 79-1/2” high filler) 489TCO90-3-90 (for 85-1/2” high filler) 567TCO90-3-93 (for 88-1/2” high filler) 567TCO90-3-96 (for 91-1/2” high filler) 567TCO90-3-102 (for 97-1/2” high filler) 738TCO90-3-108 (for 103-1/2” high filler) 738TCO90-3-120 (for 115-1/2” high filler) 795Vanity Corner Overlay 90° (31-1/2” high cabinet)VCO90-3 (for 27” high filler) 205Desk Corner Overlay 90° (28-1/2” high cabinet)DCO90-3 (for 24” high filler) 205Desk Drawer Corner Overlay 90°5DDCO90-3 (for 4-1/2” high filler) 1176DDCO90-3 (for 6-7/8” high filler) 117

Cat. Code PriceWall Corner Overlay 135°WCO135-3-30 (for 30” high filler) 205WCO135-3-36 (for 36” high filler) 289WCO135-3-39 for 39” high filler) 336WCO135-3-42 (for 42” high filler) 336WCO135-3-48 (for 48” high filler) 389WCO135-3-54 (for 54” high filler) 443WCO135-3-57 (for 57” high filler) 454WCO135-3-60 (for 60” high filler) 454Base Corner Overlay 135° (34-1/2” high cabinet)BCO135-3 (for 30” high filler) 205Tall Corner Overlay 135°TCO135-3-84 (for 79-1/2” high filler) 489TCO135-3-90 (for 85-1/2” high filler) 567TCO135-3-93 (for 88-1/2” high filler) 567TCO135-3-96 (for 91-1/2” high filler) 567TCO135-3-102 (for 97-1/2” high filler) 738TCO135-3-108 (for 103-1/2” high filler) 738TCO135-3-120 (for 115-1/2” high filler) 795Vanity Corner Overlay 135° (31-1/2” high cabinet)VCO135-3 (for 27” high filler) 205Desk Corner Overlay 135° (28-1/2” high cabinet)DCO135-3 (for 24” high filler) 205Desk Drawer Corner Overlay 135°5DDCO135-3 (for 4-1/2” high filler) 1176DDCO135-3 (for 6-7/8” high filler) 117

• Overlay is 1/2” less than corner filler width, and mitred on inside corner joint.

• Overlay is profiled to match door style on both outside long edges and both short edges. See Solid Stock information (section #82750) for size limitations on profiling.

• Overlay is shipped loose for field installation to existing filler.

• Specify CTS for width or height cut downs and indicate dimensions.


90° Corner Overlay

135° Corner Overlay

(Filler not included with overlay.)

(Filler not included with overlay.)

Overlay Cut to Size, CTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C

90° Corner Overlays 135° Corner Overlays




90200 - Fluted Overlay & Fluted Overlay with Applied Rosette

• For Full Overlay door styles only. Overlay is 1/2” less than Filler width.• Overlay has a 1/8” radius profile on all four edges.• 2-1/2” wide Fluted Overlay receives 2 flutes, 5-1/2” wide Fluted Overlay receives 4 flutes.• Specify CTS for cut down in height only and indicate needed dimension.

Minimum height = 12”.• Specify IWOF6 to increase Overlay to 5-1/2” wide with 4 flutes.


Cat. Code PriceWall Overlay FWO3-12 (for 12” high filler) 254FWO3-15 (for 15” high filler) 254FWO3-18 (for 18” high filler) 254FWO3-21 (for 21” high filler) 254FWO3-24 (for 24” high filler) 254FWO3-27 (for 27” high filler) 254FWO3-30 (for 30” high filler) 254FWO3-36 (for 36” high filler) 303FWO3-39 (for 39” high filler) 331FWO3-42 (for 42” high filler) 331FWO3-48 (for 48” high filler) 358FWO3-54 (for 54” high filler) 389FWO3-57 (for 57” high filler) 392FWO3-60 (for 60” high filler) 392Base Overlay (30” high filler for 34-1/2” high cabinet)FBO3 254Base Overlay (36” high filler for 40-1/2” high cabinet)FBO3-40 303Tall OverlayFTO3-84 (for 79-1/2” high filler) 417FTO3-90 (for 85-1/2” high filler) 457FTO3-93 (for 88-1/2” high filler) 457FTO3-96 (for 91-1/2” high filler) 457FTO3-102 (for 97-1/2” high filler) 552FTO3-108 (for 103-1/2” high filler) 552FTO3-120 (for 115-1/2” high filler) 583Vanity Overlay (27” high filler for 31-1/2” high cabinet)FVO3 254Desk Overlay (24” high filler for 28-1/2” high cabinet)FDO3 254

Cat. Code PriceWall OverlayFWOR3-12 (for 12” high filler) 354FWOR3-15 (for 15” high filler) 354FWOR3-18 (for 18” high filler) 354FWOR3-21 (for 21” high filler) 354FWOR3-24 (for 24” high filler) 354FWOR3-27 (for 27” high filler) 354FWOR3-30 (for 30” high filler) 354FWOR3-36 (for 36” high filler) 403FWOR3-39 (for 39” high filler) 431FWOR3-42 (for 42” high filler) 431FWOR3-48 (for 48” high filler) 458FWOR3-54 (for 54” high filler) 489FWOR3-57 (for 57” high filler) 492FWOR3-60 (for 60” high filler) 492Base Overlay (30” high filler for 34-1/2” high cabinet)FBOR3 354Base Overlay (36” high filler for 40-1/2” high cabinet)FBOR3-40 403Tall OverlayFTOR3-84 (for 79-1/2” high filler) 517FTOR3-90 (for 85-1/2” high filler) 557FTOR3-93 (for 88-1/2” high filler) 557FTOR3-96 (for 91-1/2” high filler) 557FTOR3-102 (for 97-1/2” high filler) 652FTOR3-108 (for 103-1/2” high filler) 652FTOR3-120 (for 115-1/2” high filler) 683Vanity Overlay (27” high filler for 31-1/2” high cabinet)FVOR3 354Desk Overlay (24” high filler for 28-1/2” high cabinet)FDOR3 354


Increase Width of Fluted Overlay to 5-1/2”, IWFO6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $135

Fluted Overlay Fluted Overlay with Applied Rosette





90210 - Overlays & Fillers (Attached)

Cat. Code PriceWall Fillers & Overlays - 3” Wide ApplicationWOF3-12 L/R 185WOF3-15 L/R 185WOF3-18 L/R 185WOF3-21 L/R 185WOF3-24 L/R 185WOF3-27 L/R 185WOF3-30 L/R 185WOF3-36 L/R 254WOF3-39 L/R 306WOF3-42 L/R 306WOF3-48 L/R 365WOF3-54 L/R 403WOF3-57 L/R 411WOF3-60 L/R 411Wall Fillers & Overlays - 6” Wide ApplicationWOF6-12 L/R 231WOF6-15 L/R 231WOF6-18 L/R 231WOF6-21 L/R 231WOF6-24 L/R 231WOF6-27 L/R 231WOF6-30 L/R 231WOF6-36 L/R 326WOF6-39 L/R 403WOF6-42 L/R 403WOF6-48 L/R 441WOF6-54 L/R 512WOF6-57 L/R 538WOF6-60 L/R 538Base Fillers & Overlays - 34-1/2” High CabinetBOF3 (30” high) L/R 185BOF6 (30” high) L/R 345Base Fillers & Overlays - 40-1/2” High CabinetBOF3-40 (36” high) L/R 254BOF6-40 (36” high) L/R 374Tall Fillers & Overlays - 3” Wide ApplicationTOF3-84 (79-1/2” high) L/R 457TOF3-90 (85-1/2” high) L/R 525TOF3-93 (88-1/2” high) L/R 525TOF3-96 (91-1/2” high) L/R 525TOF3-102 (97-1/2” high) L/R 683TOF3-108 (103-1/2” high) L/R 683TOF3-120 (115-1/2” high) L/R 735Tall Fillers & Overlays - 6” Wide ApplicationTOF6-84 (79-1/2” high) L/R 629TOF6-90 (85-1/2” high) L/R 702TOF6-93 (88-1/2” high) L/R 702TOF6-96 (91-1/2” high) L/R 702TOF6-102 (97-1/2” high) L/R 913TOF6-108 (103-1/2” high) L/R 913TOF6-120 (115-1/2” high) L/R 983Vanity Fillers & Overlays - 31-1/2” High CabinetVOF3 (27” high) L/R 185VOF6 (27” high) L/R 345Desk Fillers & Overlays - 28-1/2” High CabinetDOF3 (24” high) L/R 185DOF6 (24” high) L/R 345Desk Drawer Fillers & Overlays - 4-1/2” High Cabinet5DDOF3 L/R 1855DDOF6 L/R 287Desk Drawer Fillers & Overlays - 6-7/8” High Cabinet6DDOF3 L/R 1856DDOF6 L/R 287

Cat. Code PriceWall Corner Fillers & Overlays - 3” Wide App.WCOF90-3-30 315WCOF90-3-36 420WCOF90-3-39 478WCOF90-3-42 478WCOF90-3-48 545WCOF90-3-54 615WCOF90-3-57 643WCOF90-3-60 643Base Corner Fillers & OverlaysBCOF90-3 (34-1/2” High) 317Tall Corner Fillers & OverlaysTCOF90-3-84 (84” High) 760TCOF90-3-90 (90” High) 872TCOF90-3-93 (93” High) 872TCOF90-3-96 (96” High) 872TCOF90-3-102 (102” High) 1135TCOF90-3-108 (108” High) 1135TCOF90-3-120 (120” High) 1222Vanity Corner Fillers & OverlaysVCOF90-3 (31-1/2” High) 317Desk Corner Fillers & OverlaysDCOF90-3 (28-1/2” High) 317

Cat. Code PriceWall Corner Fillers & Overlays - 3” Wide App.WCOF135-3-30 364WCOF135-3-36 462WCOF135-3-39 525WCOF135-3-42 525WCOF135-3-48 591WCOF135-3-54 662WCOF135-3-57 690WCOF135-3-60 690Base Corner Fillers & OverlaysBCOF135-3 (34-1/2” High) 364Tall Corner Fillers & OverlaysTCOF135-3-84 (84” High) 817TCOF135-3-90 (90” High) 950TCOF135-3-93 (93” High) 950TCOF135-3-96 (96” High) 950TCOF135-3-102 (102” High) 1237TCOF135-3-108 (108” High) 1237TCOF135-3-120 (120” High) 1332Vanity Corner Fillers & OverlaysVCOF135-3 (31-1/2” High) 364Desk Corner Fillers & OverlaysDCOF135-3 (28-1/2” High) 364

Corner Overlay & Filler - 90°

Corner Overlay & Filler - 135°

Flush Toe Space Filler, FTSF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $67

• Specify Left or Right application.• Available for Full Overlay door styles only. Attached Overlay is 1/4” less than filler width. • Fillers are 3” or 6” wide solid stock. (No toe space included for base or tall fillers.)• Specify FTSF for Flush Toe on base, tall, vanity and desk Fillers. FTSF adds 4-1/2” to

Filler height.• Overlay is profiled to match door style on one long edge and two short edges.

Specify S4S to profile all 4 edges. (Overlay is 1/2” less than filler width.) Minimum width of S4S Overlay is 2”.

• Specify CTS for width and/or height reduction and indicate needed dimension(s). For Corner Fillers/Overlays, minimum width of the Filler is 2” on each face. Clearly specify left, right or both legs for cut down.

• Price includes Filler with Overlay attached.

Overlay and Filler(attached)

Corner Overlay and Filler 90 Degrees

Corner Overlay and Filler 135 Degrees


Shape 4 Sides, S4S . . . . . . . . . . .N/C



90250 - End Panels

• Specify Left or Right End Panel.

• Interior of End Panel is Supreme Coat. Specify ISF, Interior Side Finished, if needed. Unfinished glue blocks remain behind stile for assembly.

• Specify FTSEP for a Flush Toe Space if needed on base, tall, vanity, and desk End Panels.

• Specify CTS for width, height or depth cut downs and indicate needed dimension(s). Minimum width of face is 1” wide.

• Specify ID to increase depth up to a maximum of 36”.

• Specify IWEP6 to increase width up to a maximum of 6”.

• Specify PEP, Peninsula End Panel, to add a finished Filler on the back side.

• Panels over 96” high receive a 3/4” Veneer Core Flush Finished End.


Cat. Code PriceFurniture BoardWEPW30 L/R 143WEPW36 L/R 158WEPW39 L/R 177WEPW42 L/R 177WEPW48 L/R 196WEPW54 L/R 217WEPW57 L/R 241WEPW60 L/R 241Plywood WEPP30 L/R 173WEPP36 L/R 199WEPP39 L/R 217WEPP42 L/R 217WEPP48 L/R 241WEPP54 L/R 269WEPP57 L/R 298WEPP60 L/R 298

Cat. Code PriceFurniture BoardBEPW (34-1/2” high) L/R 214BEPW40 (40-1/2” high) L/R 250VEPW18 (31-1/2” high) L/R 214VEPW21 (31-1/2” high) L/R 214TVEPW18 (34-1/2” high) L/R 214TVEPW21 (34-1/2” high) L/R 214DEPW18 (28-1/2” high) L/R 214DEPW21 (28-1/2” high) L/R 214DEPW24 (28-1/2” high) L/R 214PlywoodBEPP (34-1/2” high) L/R 268BEPP40 (40-1/2” high) L/R 313VEPP18 (31-1/2” high) L/R 268VEPP21 (31-1/2” high) L/R 268TVEPP18 (34-1/2” high) L/R 268TVEPP21 (34-1/2” high) L/R 268DEPP18 (28-1/2” high) L/R 268DEPP21 (28-1/2” high) L/R 268DEPP24 (28-1/2” high) L/R 268

Cat. Code PriceFurniture BoardTEPW1284 (84” high) L/R 262TEPW1884 (84” high) L/R 349TEPW2184 (84” high) L/R 437TEPW2484 (84” high) L/R 525TEPW1290 (90” high) L/R 278TEPW1890 (90” high) L/R 371TEPW2190 (90” high) L/R 464TEPW2490 (90” high) L/R 556TEPW1293 (93” high) L/R 297TEPW1893 (93” high) L/R 396TEPW2193 (93” high) L/R 493TEPW2493 (93” high) L/R 591TEPW1296 (96” high) L/R 297TEPW1896 (96” high) L/R 396TEPW2196 (96” high) L/R 493TEPW2496 (96” high) L/R 591

Cat. Code PricePlywoodTEPP1284 (84” high) L/R 336TEPP1884 (84” high) L/R 438TEPP2184 (84” high) L/R 546TEPP2484 (84” high) L/R 671TEPP1290 (90” high) L/R 353TEPP1890 (90” high) L/R 462TEPP2190 (90” high) L/R 578TEPP2490 (90” high) L/R 704TEPP1293 (93” high) L/R 371TEPP1893 (93” high) L/R 494TEPP2193 (93” high) L/R 615TEPP2493 (93” high) L/R 739TEPP1296 (96” high) L/R 371TEPP1896 (96” high) L/R 494TEPP2196 (96” high) L/R 615TEPP2496 (96” high) L/R 739TEPP12120 (120” high) L/R 557TEPP18120 (120” high) L/R 741TEPP21120 (120” high) L/R 923TEPP24120 (120” high) L/R 1109

Wall End Panel Base End Panel Tall End Panel


Flush Toe Space End Panel, FTSEP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $96

Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C

Increase Depth, ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Add 30% to Panel Price

Increase Width of End Panel up to 6”, IWEP6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $135

Peninsula End Panel, PEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add $140 to Panel Price

NOTE: TEPP over 96” is not available in Rustic Hickory.

Left Shown



90260 - Decorative End Panels


• Decorative End Panel has a single-width insert panel (flat or raised) to match the door style specified for the order, and a 3” wide front stile. Exception: Mitered door styles will be mortise and tennon construction and only the insert panel will match.

• Interior of End Panel has a natural finish. Specify ISF, Interior Side Finished, if needed. Unfinished glue blocks remain behind stile for assembly.


• Specify CTS for width, height or depth cut downs and indicate needed dimension(s). Minimum width of face is 1”. Minimum depth is 8-1/2”.

• Specify ID to increase depth. Maximum depth of End Panel with single-width insert is 27”.




Cat. Code PriceDTEP1284 (84” high) L/R 1032DTEP1884 (84” high) L/R 1561DTEP2184 (84” high) L/R 1561DTEP2484 (84” high) L/R 1740DTEP1290 (90” high) L/R 1130DTEP1890 (90” high) L/R 1650DTEP2190 (90” high) L/R 1650DTEP2490 (90” high) L/R 1941DTEP1293 (93” high) L/R 1130DTEP1893 (93” high) L/R 1650DTEP2193 (93” high) L/R 1650DTEP2493 (93” high) L/R 1941DTEP1296 (96” high) L/R 1130DTEP1896 (96” high) L/R 1650DTEP2196 (96” high) L/R 1650DTEP2496 (96” high) L/R 1941DTEP12120 (120” high) L/R 1694DTEP18120 (120” high) L/R 2474DTEP21120 (120” high) L/R 2474DTEP24120 (120” high) L/R 2911

Cat. Code PriceDBEP (34-1/2” high) L/R 839DBEP40 (40-1/2” high) L/R 985DVEP18 (31-1/2” high) L/R 839DVEP21 (31-1/2” high) L/R 839DTVEP18 (34-1/2” high) L/R 839DTVEP21 (34-1/2” high) L/R 839DDEP18 (28-1/2” high) L/R 839DDEP21 (28-1/2” high) L/R 839DDEP24 (28-1/2” high) L/R 839

Cat. Code PriceDWEP30 L/R 510DWEP36 L/R 563DWEP39 L/R 612DWEP42 L/R 612DWEP48 L/R 725DWEP54 L/R 777DWEP57 L/R 828DWEP60 L/R 828

Decorative Wall End Panel Decorative Base End Panel Decorative Tall End Panel



Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C




NOTE: Panels over 48” high have 2 equally sized insert panels.

NOTE: DTEP over 96” is not available in Rustic Hickory.

Left Shown



90270 - End Panels - Two Sided

• Two-Sided End Panels are finished on both sides and front stile.

• Bottom of WEP2S has a return to wall.


• Specify CTS for width, height or depth decrease and indicate needed dimension(s). Minimum width of face is 1-1/2” wide.




• Panels over 96” high receive a 3/4” Veneer Core Flush Finished End.


Cat. Code PriceFurniture BoardWEPW2S30 248WEPW2S36 275WEPW2S39 308WEPW2S42 308WEPW2S48 343WEPW2S54 381WEPW2S57 423WEPW2S60 423PlywoodWEPP2S30 301WEPP2S36 347WEPP2S39 381WEPP2S42 381WEPP2S48 423WEPP2S54 467WEPP2S57 521WEPP2S60 521

Cat. Code PriceFurniture BoardBEPW2S (34-1/2” high) 373BEPW2S40 (40-1/2” high) 438VEPW2S18 (31-1/2” high) 373VEPW2S21 (31-1/2” high) 373TVEPW2S18 (34-1/2” high) 373TVEPW2S21 (34-1/2” high) 373DEPW2S18 (28-1/2” high) 373DEPW2S21 (28-1/2” high) 373DEPW2S24 (28-1/2” high) 373PlywoodBEPP2S (34-1/2” high) 466BEPP2S40 (40-1/2” high) 548VEPP2S18 (31-1/2” high) 466VEPP2S21 (31-1/2” high) 466TVEPP2S18 (34-1/2” high) 466TVEPP2S21 (34-1/2” high) 466DEPP2S18 (28-1/2” high) 466DEPP2S21 (28-1/2” high) 466DEPP2S24 (28-1/2” high) 466

Cat. Code PriceFurniture BoardTEPW2S1284 (84” high) 458TEPW2S1884 (84” high) 611TEPW2S2184 (84” high) 763TEPW2S2484 (84” high) 917TEPW2S1290 (90” high) 485TEPW2S1890 (90” high) 651TEPW2S2190 (90” high) 811TEPW2S2490 (90” high) 971TEPW2S1293 (93” high) 520TEPW2S1893 (93” high) 690TEPW2S2193 (93” high) 863TEPW2S2493 (93” high) 1034TEPW2S1296 (96” high) 520TEPW2S1896 (96” high) 690TEPW2S2196 (96” high) 863TEPW2S2496 (96” high) 1034

Cat. Code PricePlywoodTEPP2S1284 (84” high) 590TEPP2S1884 (84” high) 766TEPP2S2184 (84” high) 955TEPP2S2484 (84” high) 1174TEPP2S1290 (90” high) 616TEPP2S1890 (90” high) 810TEPP2S2190 (90” high) 1013TEPP2S2490 (90” high) 1231TEPP2S1293 (93” high) 651TEPP2S1893 (93” high) 864TEPP2S2193 (93” high) 1077TEPP2S2493 (93” high) 1293TEPP2S1296 (96” high) 651TEPP2S1896 (96” high) 864TEPP2S2196 (96” high) 1077TEPP2S2496 (96” high) 1293TEPP2S12120 (120” high) 977TEPP2S18120 (120” high) 1295TEPP2S21120 (120” high) 1616TEPP2S24120 (120” high) 1939



Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C




NOTE: TEPP2s over 96” is not available in Rustic Hickory.



90280 - Two Sided End Panel with One Decorative End


• Flush Finished End is standard and included at No Charge on non-decorative side.

• End Panel has a single-width insert panel (flat or raised) to match the door style specified for the order, and a 3” wide front stile on one side. Exception: Mitered door styles will be mortise and tennon construction and only the insert panel will match. The other side will be a standard end.


• Specify CTS for width, height or depth reduction.Minimum width of face is 1-1/2”. Minimum depth is 8-1/2”.





Cat. Code PriceTEP2SD1284 (84” high) L/R 1245TEP2SD1884 (84” high) L/R 2063TEP2SD2184 (84” high) L/R 2063TEP2SD2484 (84” high) L/R 2261TEP2SD1290 (90” high) L/R 1522TEP2SD1890 (90” high) L/R 2230TEP2SD2190 (90” high) L/R 2230TEP2SD2490 (90” high) L/R 2513TEP2SD1293 (93” high) L/R 1522TEP2SD1893 (93” high) L/R 2230TEP2SD2193 (93” high) L/R 2230TEP2SD2493 (93” high) L/R 2513TEP2SD1296 (96” high) L/R 1522TEP2SD1896 (96” high) L/R 2230TEP2SD2196 (96” high) L/R 2230TEP2SD2496 (96” high) L/R 2513TEP2SD12120 (120” high) L/R 2282TEP2SD18120 (120” high) L/R 3345TEP2SD21120 (120” high) L/R 3345TEP2SD24120 (120” high) L/R 3770

Cat. Code PriceBEP2SD (34-1/2” high) L/R 1155BEP2SD40 (40-1/2” high) L/R 1356VEP2SD18 (31-1/2” high) L/R 1155VEP2SD21 (31-1/2” high) L/R 1155TVEP2SD18 (34-1/2” high) L/R 1155TVEP2SD21 (34-1/2” high) L/R 1155DEP2SD18 (28-1/2” high) L/R 1155DEP2SD21 (28-1/2” high) L/R 1155DEP2SD24 (28-1/2” high) L/R 1155

Cat. Code PriceWEP2SD30 L/R 640WEP2SD36 L/R 700WEP2SD39 L/R 770WEP2SD42 L/R 770WEP2SD48 L/R 902WEP2SD54 L/R 963WEP2SD57 L/R 1031WEP2SD60 L/R 1031



Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C




NOTE: TEP2SD over 96” is not available in Rustic Hickory.

NOTE: Panels over 48” high have 2 equally sized insert panels.

Left Shown



90285 - “J” End Panels

• “J” End Panels are finished on both sides and front stile.

• “J” End Panels are designed to be flush with the door and drawer front, and are 7/8” deeper than cabinet.

• Flush Finished Ends are standard and included at No Charge.

• Flush Toe is standard.

• Specify CTS for width, height or depth decrease and indicate needed dimension(s). Minimum width of face is 1-1/2” wide.





“J” Wall End Panel “J” Base End Panel “J” Tall End Panel

Notch for Toe (Specify L or R panel), NFT (L or R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $61

Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C



Peninsula End Panel, PEPJEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add $140 to Panel Price

NOTE: JTEPP over 96” is not available in Rustic Hickory.

Left Shown

Cat. Code PricePlywoodJWEPP30 301JWEPP36 347JWEPP39 381JWEPP42 381JWEPP48 423JWEPP54 467JWEPP57 521JWEPP60 521

Cat. Code PricePlywoodJBEPP (34-1/2” high) 466JBEPP40 (40-1/2” high) 548JVEPP18 (31-1/2” high) 466JVEPP21 (31-1/2” high) 466JTVEPP18 (34-1/2” high) 466JTVEPP21 (34-1/2” high) 466JDEPP18 (28-1/2” high) 466JDEPP21 (28-1/2” high) 466JDEPP24 (28-1/2” high) 466

Cat. Code PricePlywoodJTEPP1284 (84” high) 590JTEPP1884 (84” high) 766JTEPP2184 (84” high) 955JTEPP2484 (84” high) 1174JTEPP3084 (84” high) 1468JTEPP1290 (90” high) 616JTEPP1890 (90” high) 810JTEPP2190 (90” high) 1013JTEPP2490 (90” high) 1231JTEPP3090 (90” high) 1539JTEPP1293 (93” high) 651JTEPP1893 (93” high) 864JTEPP2193 (93” high) 1077JTEPP2493 (93” high) 1293JTEPP3093 (93” high) 1617JTEPP1296 (96” high) 651JTEPP1896 (96” high) 864JTEPP2196 (96” high) 1077JTEPP2496 (96” high) 1293JTEPP3096 (96” high) 1617JTEPP12120 (120” high) 977JTEPP18120 (120” high) 1295JTEPP21120 (120” high) 1616JTEPP24120 (120” high) 1939JTEPP30120 (120” high) 2424



90287 - “J” End Panel with One Decorative End


• “J” End Panels are designed to be flush with the door and drawer front, and are 7/8” deeper than cabinet.

• End Panel has a single-width insert panel (flat or raised) to match the door style specified for the order, and a 3” wide front stile on one side. Exception: Mitered door styles will be mortise and tenon construction and only the insert panel will match.

• Flush Toe is standard.

• Specify CTS for width, height or depth decrease and indicate needed dimension(s). Minimum width of face is 1-1/2” wide. Minimum depth is 8-1/2”.





Cat. Code PriceJTEPD1284 (84” high) L/R 1245JTEPD1884 (84” high) L/R 2063JTEPD2184 (84” high) L/R 2063JTEPD2484 (84” high) L/R 2261JTEPD1290 (90” high) L/R 1522JTEPD1890 (90” high) L/R 2230JTEPD2190 (90” high) L/R 2230JTEPD2490 (90” high) L/R 2513JTEPD1293 (93” high) L/R 1522JTEPD1893 (93” high) L/R 2230JTEPD2193 (93” high) L/R 2230JTEPD2493 (93” high) L/R 2513JTEPD1296 (96” high) L/R 1522JTEPD1896 (96” high) L/R 2230JTEPD2196 (96” high) L/R 2230JTEPD2496 (96” high) L/R 2513JTEPD12120 (120” high) L/R 2282JTEPD18120 (120” high) L/R 3345JTEPD21120 (120” high) L/R 3345JTEPD24120 (120” high) L/R 3770

Cat. Code PriceJBEPD (34-1/2” high) L/R 1155JBEPD40 (40-1/2” high) L/R 1356JVEPD18 (31-1/2” high) L/R 1155JVEPD21 (31-1/2” high) L/R 1155JTVEPD18 (34-1/2” high) L/R 1155JTVEPD21 (34-1/2” high) L/R 1155JDEPD18 (28-1/2” high) L/R 1155JDEPD21 (28-1/2” high) L/R 1155JDEPD24 (28-1/2” high) L/R 1155

Cat. Code PriceJWEPD30 L/R 640JWEPD36 L/R 700JWEPD39 L/R 770JWEPD42 L/R 770JWEPD48 L/R 902JWEPD54 L/R 963JWEPD57 L/R 1031JWEPD60 L/R 1031

“J” Wall End Panel “J” Base End Panel “J” Tall End Panel

Notch for Toe (Specify L or R panel), NFT (L or R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $61

Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C



Peninsula End Panel, PEPJEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add $140 to Panel Price

NOTE: JTEPD over 96” is not available in Rustic Hickory.

Left Shown



90300 - Angled End Panels

• Specify Left or Right application.

• Base, Tall, Vanity and Desk Angle End Panels have a recessed toe. Specify FTSEP for a Flush Toe.

• Interior side is unfinished.

• Specify CTS for height and/or depth cut downs only and indicate needed dimension(s). Minimum depth is 4-1/2”.

• Specify ID to increase depth up to 36” deep maximum.

• Panels over 96” high receive a 3/4” veneer core plywood Flush Finished End.



Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C


NOTE: TAEPP over 96” is not available in Rustic Hickory.

NOTE: Angled End Panels are designed for installation flush with the face frame - not flush with the door/drawer front.

Cat. Code PriceFurniture BoardWAEPW30 L/R 222WAEPW36 L/R 237WAEPW39 L/R 252WAEPW42 L/R 252WAEPW48 L/R 271WAEPW54 L/R 290WAEPW57 L/R 310WAEPW60 L/R 310PlywoodWAEPP30 L/R 278WAEPP36 L/R 297WAEPP39 L/R 315WAEPP42 L/R 315WAEPP48 L/R 339WAEPP54 L/R 362WAEPP57 L/R 388WAEPP60 L/R 388

Cat. Code PriceFurniture BoardBAEPW (34-1/2” high) L/R 627BAEPW40 (40-1/2” high) L/R 734VAEPW18 (31-1/2” high) L/R 627VAEPW21 (31-1/2” high) L/R 627TVAEPW18 (34-1/2” high) L/R 627TVAEPW21 (34-1/2” high) L/R 627DAEPW18 (28-1/2” high) L/R 627DAEPW21 (28-1/2” high) L/R 627DAEPW24 (28-1/2” high) L/R 627PlywoodBAEPP (34-1/2” high) L/R 737BAEPP40 (40-1/2” high) L/R 863VAEPP18 (31-1/2” high) L/R 737VAEPP21 (31-1/2” high) L/R 737TVAEPP18 (34-1/2” high) L/R 737TVAEPP21 (34-1/2” high) L/R 737DAEPP18 (28-1/2” high) L/R 737DAEPP21 (28-1/2” high) L/R 737DAEPP24 (28-1/2” high) L/R 737

Cat. Code PriceFurniture BoardTAEPW1284 (84” high) L/R 850TAEPW1884 (84” high) L/R 915TAEPW2184 (84” high) L/R 979TAEPW2484 (84” high) L/R 1043TAEPW1290 (90” high) L/R 910TAEPW1890 (90” high) L/R 977TAEPW2190 (90” high) L/R 1041TAEPW2490 (90” high) L/R 1105TAEPW1293 (93” high) L/R 910TAEPW1893 (93” high) L/R 977TAEPW2193 (93” high) L/R 1041TAEPW2493 (93” high) L/R 1105TAEPW1296 (96” high) L/R 910TAEPW1896 (96” high) L/R 977TAEPW2196 (96” high) L/R 1041TAEPW2496 (96” high) L/R 1105

Cat. Code PricePlywoodTAEPP1284 (84” high) L/R 1014TAEPP1884 (84” high) L/R 1096TAEPP2184 (84” high) L/R 1176TAEPP2484 (84” high) L/R 1257TAEPP1290 (90” high) L/R 1090TAEPP1890 (90” high) L/R 1173TAEPP2190 (90” high) L/R 1253TAEPP2490 (90” high) L/R 1334TAEPP1293 (93” high) L/R 1090TAEPP1893 (93” high) L/R 1173TAEPP2193 (93” high) L/R 1253TAEPP2493 (93” high) L/R 1334TAEPP1296 (96” high) L/R 1090TAEPP1896 (96” high) L/R 1173TAEPP2196 (96” high) L/R 1253TAEPP2496 (96” high) L/R 1334TAEPP12120 (120” high) L/R 1635TAEPP18120 (120” high) L/R 1760TAEPP21120 (120” high) L/R 1880TAEPP24120 (120” high) L/R 2001


Left Shown



90310 - Decorative Angled End Panels

• Specify Left or Right End Panel (left shown).

• Decorative Angle End Panel has a single-width insert panel (flat or raised) to match the door style specified for the order, and a 3” wide front stile. Exception: Mitered door styles will be mortise and tennon construction and only the insert panel will match.

• Interior of End Panel is unfinished.


• Specify CTS for height or depth only cut downs and indicate needed dimension(s).Minimum depth is 11-1/2”.



Cat. Code PriceDTAEP1284 (84” high) L/R 1406DTAEP1884 (84” high) L/R 1938DTAEP2184 (84” high) L/R 1938DTAEP2484 (84” high) L/R 2114DTAEP1290 (90” high) L/R 1507DTAEP1890 (90” high) L/R 2027DTAEP2190 (90” high) L/R 2027DTAEP2490 (90” high) L/R 2319DTAEP1293 (93” high) L/R 1507DTAEP1893 (93” high) L/R 2027DTAEP2193 (93” high) L/R 2027DTAEP2493 (93” high) L/R 2319DTAEP1296 (96” high) L/R 1507DTAEP1896 (96” high) L/R 2027DTAEP2196 (96” high) L/R 2027DTAEP2496 (96” high) L/R 2319DTAEP12120 (120” high) L/R 2259DTAEP18120 (120” high) L/R 3040DTAEP21120 (120” high) L/R 3040DTAEP24120 (120” high) L/R 3477

Cat. Code PriceDBAEP (34-1/2” high) L/R 1297DBAEP40 (40-1/2” high) L/R 1518DVAEP18 (31-1/2” high) L/R 1297DVAEP21 (31-1/2” high) L/R 1297DTVAEP18 (34-1/2” high) L/R 1297DTVAEP21 (34-1/2” high) L/R 1297DDAEP18 (28-1/2” high) L/R 1297DDAEP21 (28-1/2” high) L/R 1297DDAEP24 (28-1/2” high) L/R 1297

Cat. Code PriceDWAEP30 L/R 700DWAEP36 L/R 752DWAEP39 L/R 800DWAEP42 L/R 800DWAEP48 L/R 915DWAEP54 L/R 965DWAEP57 L/R 1018DWAEP60 L/R 1018



Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C


NOTE: DTAEP over 96” is not available in Rustic Hickory.

NOTE: Decorative Angled End Panels are designed for installation flush with the face frame - not flush with the door/drawer front.

Left Shown


08FEBRUARY2021© Dura Supreme Cabinetry 11-17

90316 - Pilaster End Panels

• Specify style of Pilaster (I - Plain, J - Fluted, K - Reeded) Example: PWEP30-I


• Flush Finished End is standard and included in the price.

• Flush toe space is standard for Base and Tall End Panels.

• Interior side of End Panel is not finished. To finish interior side, specify ISF. Method of assembly is visible.

• Specify CTS to cut down height and/or depth only and indicate dimensions.

• Specify ID to increase depth up to 36” deep.


• Specify PEPP to add a finished Filler and Pilaster on back side.


2-1/2” wide Pilaster is flush with outside edge to facilitate molding installation. Filler is 2-3/4” wide.

Cat. Code PricePWEPP30 L/R 574PWEPP36 L/R 590PWEPP39 L/R 608PWEPP42 L/R 608PWEPP48 L/R 672PWEPP54 L/R 695PWEPP57 L/R 718PWEPP60 L/R 718

Wall Pilaster End Panel Base Pilaster End Panel Tall Pilaster End Panel


Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C



Peninsula End Panel with Pilaster, PEPP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add $567 to Panel Price

Cat. Code Price28-1/2” HighPBEPP28-18 L/R 667PBEPP28-21 L/R 667PBEPP28-24 L/R 66731-1/2” HighPBEPP31-18 L/R 667PBEPP31-21 L/R 667PBEPP31-24 L/R 66734-1/2” HighPBEPP34-18 L/R 667PBEPP34-21 L/R 667PBEPP34-24 L/R 66740-1/2” HighPBEPP40-18 L/R 681PBEPP40-21 L/R 681PBEPP40-24 L/R 681

Cat. Code Price84” HighPTEPP84-12 L/R 822PTEPP84-18 L/R 910PTEPP84-21 L/R 997PTEPP84-24 L/R 108590” HighPTEPP90-12 L/R 857PTEPP90-18 L/R 956PTEPP90-21 L/R 1054PTEPP90-24 L/R 115293” HighPTEPP93-12 L/R 857PTEPP93-18 L/R 956PTEPP93-21 L/R 1054PTEPP93-24 L/R 115296” HighPTEPP96-12 L/R 857PTEPP96-18 L/R 956PTEPP96-21 L/R 1054PTEPP96-24 L/R 1152

Left Shown

NOTE: PTEPP is available in style I - Plain only.




Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C



Peninsula End Panel with 3-1/2” Turned Post, PEPTP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add $695 to Panel Price + Applicable Turned Post upcharge

Peninsula End Panel with 5-1/2” Turned Post, PEPTP5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add $1130 to Panel Price + Applicable Turned Post upcharge

3-1/2” Turned Post Base End Panel

Cat. Code Price31-1/2” HighTP3BEPP31-18 L/R 693*TP3BEPP31-21 L/R 712*TP3BEPP31-24 L/R 784*34-1/2” HighTP3BEPP34-18 L/R 712*TP3BEPP34-21 L/R 731*TP3BEPP34-24 L/R 803*40-1/2” HighTP3BEPP40-18 L/R 871*TP3BEPP40-21 L/R 895*TP3BEPP40-24 L/R 979*

5-1/2” Turned Post Base End Panel

Cat. Code Price31-1/2” HighTP5BEPP31-18 L/R 1042*TP5BEPP31-21 L/R 1060*TP5BEPP31-24 L/R 1130*34-1/2” HighTP5BEPP34-18 L/R 1067*TP5BEPP34-21 L/R 1085*TP5BEPP34-24 L/R 1158*40-1/2” HighTP5BEPP40-18 L/R 1319*TP5BEPP40-21 L/R 1343*TP5BEPP40-24 L/R 1428*

90326 - Turned Post Base End Panels

*Pricing shown is a “base price”. Select a Turned Post style (see page 10-15) and add appropriate style upcharge.

• Specify style of Turned Post from page 10-14. Example: TP3BEPP31-18-A2


• Flush toe space and Flush Finished End are standard.

• Interior side of End Panel is not finished. Specify ISF to finish interior side. Method of assembly is visible.

• Specify CTS for depth cut down only and indicate dimension.

• Specify ID to increase depth up to 36”.


• Specify PEPTP to add a finished Filler and Turned Post on back side.


3-1/2” or 5-1/2” wide half-post is attached flush with outside edge to facilitate molding installation. Overall width of filler is 3-3/4” or 5-3/4”



Wall Decorative Overlay End Panels

Vanity/Desk Decorative Overlay End Panels

Cat. Code Price12” DeepDOEPW24 182DOEPW30 229DOEPW36 273DOEPW39 320DOEPW42 320DOEPW48 403DOEPW54 451DOEPW57 500DOEPW60 50018” DeepDOEPW48-18 604DOEPW54-18 676DOEPW57-18 751DOEPW60-18 75121” DeepDOEPW48-21 704DOEPW54-21 788DOEPW57-21 874DOEPW60-21 874

Base Decorative Overlay End Panels

Cat. Code Price12” Deep, 30” high (for 34-1/2” high base)DOEPBS 27324” Deep, 30” high (for 34-1/2” high base)DOEPB 54512” Deep, 36” high (for 40-1/2” high base)DOEPBS-40 27324” Deep, 36” high (for 40-1/2” high base)DOEPB-40 545

Tall and Linen Decorative Overlay End Panels

Cat. Code Price79-1/2” high for use on 84” tall cabinetsDOEPT1284 635DOEPT1884 908DOEPT2184 1059DOEPT2484 127085-1/2” high for use on 90” tall cabinetsDOEPT1290 682DOEPT1890 977DOEPT2190 1138DOEPT2490 136088-1/2” high for use on 93” tall cabinetsDOEPT1293 725DOEPT1893 1043DOEPT2193 1218DOEPT2493 145191-1/2” high for use on 96” tall cabinetsDOEPT1296 725DOEPT1896 1043DOEPT2196 1218DOEPT2496 1451115-1/2” high (for use on 120” high applications)DOEPT12120 1088DOEPT18120 1565DOEPT21120 1826DOEPT24120 2176

Cat. Code Price24” high for 28-1/2” desk cabinetsDOEPD18 307DOEPD21 359DOEPD24 45227” high for 31-1/2” vanity or desk cabinetsDOEPV18 307DOEPV21 359DOEPV24 45230” high for 34-1/2” tall vanity cabinetsDOEPTV18 348DOEPTV21 405

90350 - Decorative Overlay End Panels

• Decorative Overlay End Panels have a single-width insert panel and match the door style specified for the order. Exception: Mitered doors have mortise and tennon construction and only the insert panel matches the door style.

• Shipped loose for field installation to the end of a cabinet.• Both vertical edges receive 1/8” radius and are finished. Top and bottom edges are not finished unless a wall cabinet

is specified, then the bottom edge is finished.• Specify ID to increase depth. Maximum depth of DOEP with a single panel in width is 27”.• Specify CTS to decrease depth or height. Minimum depth = 8-1/2”. Minimum height = 9-1/4” with square inserts

or 12-1/4” with arched inserts. • For Peninsula wall or base applications, specify P before the code at no charge. • On Base, Vanity, Tall, and Desk Decorative Overlay End Panels, lineal toe board must be returned back along

side of cabinet to cover unfinished end of cabinet. Specify FTSEP to increase the bottom rail by 4-1/2” for a flush toe application. Toe notch must be field cut if needed.

ALL OTHER MODIFICATIONS MUST BE QUOTED FTSEP modification shown

• For Peninsula applications, specify the letter P before the code. PDOEPW will be 12-1/2” DEEP.

• For Peninsula applications, specify the letter P before the code. PDOEPB will be 24-1/2” DEEP.

NOTE: Decorative Overlay End Panels over 48” high have 2 equal size panels in height.


Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C


NOTE: DOEPT over 96” is not available in Rustic Hickory.



90355 - Cottage Bead Overlay End Panel

• CBOEP has Bead Board Molding (BBM) installed on one side. Panel depth is 7/8” deeper than the cabinet (including the nosing).• For a Peninsula panel, specify P in front of the code. (Example: Peninsula Cottage Bead Overlay End Panel = PCBOEP).

Peninsula CPOEP is 1-3/4” deeper than standard cabinet depth and has nosing on both edges.• Interior side of panel is finished approximately 4” back from front edge. Specify ISFNC to finish entire interior side.• Toe notch must be field cut by the installer.• Specify ID to increase depth. Maximum = 36”.• Specify CTS to decrease depth or height.• Shipped loose for field installation.• For loose pieces of Bead Board Molding (BBM), see the Molding section.

Wall Overlay End Panel Shown

Nosing Profile Pattern

Wall Cottage Bead Overlay End Panels

Vanity/Desk Cottage Bead Overlay End Panels

Cat. Code Price12-7/8” DeepCBOEPW24B 203CBOEPW30B 249CBOEPW36B 297CBOEPW39B 343CBOEPW42B 343CBOEPW48B 391CBOEPW54B 436CBOEPW57B 481CBOEPW60B 48118-7/8” DeepCBOEPW48-18B 616CBOEPW54-18B 689CBOEPW57-18B 765CBOEPW60-18B 76521-7/8” DeepCBOEPW48-21B 718CBOEPW54-21B 801CBOEPW57-21B 889CBOEPW60-21B 889

Tall Cottage Bead Overlay End Panels

Cat. Code Price84” HighCBOEPT1284B 649CBOEPT1884B 922CBOEPT2184B 1073CBOEPT2484B 128490” HighCBOEPT1290B 696CBOEPT1890B 990CBOEPT2190B 1152CBOEPT2490B 138893” HighCBOEPT1293B 739CBOEPT1893B 1057CBOEPT2193B 1231CBOEPT2493B 146596” HighCBOEPT1296B 739CBOEPT1896B 1057CBOEPT2196B 1231CBOEPT2496B 1465

Cat. Code Price28-1/2” HighCBOEPD18B 321CBOEPD21B 371CBOEPD24B 46631-1/2” HighCBOEPV18B 321CBOEPV21B 371CBOEPV24B 46634-1/2” HighCBOEPTV18B 362CBOEPTV21B 419

Cat. Code Price12-7/8” Deep, 34-1/2” highCBOEPBSB 28724-7/8” Deep, 34-1/2” highCBOEPBB 558

Base Cottage Bead Overlay End Panels

Interior Side Finished, ISFNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C

Peninsula Cottage Bead Overlay End Panels (P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C

Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C

Increase Depth, ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add 30% to Panel Price



90400 - Refrigerator End Closer Panel

90425 - Refrigerator End Panel

Increase Depth, ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Add 30% to Panel Price

Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C

Interior Side Finished, ISF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$261

• Interior of end panels are natural Maple.


• Specify CTS to cut down width, depth and/or height. Minimum width of face is 1” wide.

• 3/4” thick edgebanded panel is finished on both sides.


• Specify CTS to cut down depth and/or height.

Furniture Board

Cat. Code Price84” TallREPW1284 341REPW2484 587REPW2784 649REPW3084 71090” TallREPW1290 389REPW2490 670REPW2790 740REPW3090 81193” TallREPW1293 389REPW2493 670REPW2793 740REPW3093 81196” TallREPW1296 389REPW2496 670REPW2796 740REPW3096 811

Furniture Board

Cat. Code Price84” TallRECPW1284 345RECPW2484 588RECPW2784 647RECPW3084 70690” TallRECPW1290 389RECPW2490 662RECPW2790 729RECPW3090 79593” TallRECPW1293 389RECPW2493 662RECPW2793 729RECPW3093 79596” TallRECPW1296 389RECPW2496 662RECPW2796 729RECPW3096 795

Plywood

Cat. Code Price84” TallREPP1284 392REPP2484 647REPP2784 746REPP3084 81790” TallREPP1290 447REPP2490 772REPP2790 852REPP3090 93393” TallREPP1293 447REPP2493 772REPP2793 852REPP3093 93396” TallREPP1296 447REPP2496 772REPP2796 852REPP3096 933120” TallREPP12120 671REPP24120 1158REPP27120 1278REPP30120 1399

Plywood

Cat. Code Price84” TallRECPP1284 430RECPP2484 735RECPP2784 809RECPP3084 88290” TallRECPP1290 485RECPP2490 826RECPP2790 909RECPP3090 99293” TallRECPP1293 485RECPP2493 826RECPP2793 909RECPP3093 99296” TallRECPP1296 485RECPP2496 826RECPP2796 909RECPP3096 992120” TallRECPP12120 727RECPP24120 1239RECPP27120 1363RECPP30120 1487

Increase Depth, ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add 30% to Panel Price

Cut to Size, CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C

NOTE: RECPP over 96” is not available in Rustic Hickory.

NOTE: REPP over 96” is not available in Rustic Hickory.

90450 - Sub-zero(Side) Panel

• SZP is reversible for left or right side application.

• Designed for Sub-Zero Built-In Refrigeration Models (BI Series)

• Interior of end panel is Supreme Coat. Exterior is finished.

• Panel is oversized and may be trimmed in the field.

Cat. Code PriceSZP89 598


24AUGUST2020 © Dura Supreme Cabinetry11-23b

90501- Refrigerator Door Panel (1/4” Backer Panel) - RDPA

• Refrigerator Door Panel has doors mounted on a 1/4” thick backer panel. The backer panel is larger than the door panel.

• Grain direction on back panel is vertical.

• Specify 1/4” backer panel size, then specify reveals (Top, Bottom, Left and Right.

• See Section #82850 for sizing limitations.

• Inset includes Face Frame around each door/drawer .

• For custom configurations, special machining, notches, ice makers, etc. specify Non-Standard and include a sketch.

Confi guration: “_____”

Panel “A”

1/4” Backer Panel size: Width _____ Height _____

Reveals: Top _____ Bottom _____ Left _____ Right _____

Panel “B”



Panel “C”



Panel “D”



Is this a Non-Standard Application? ❏ No ❏ YesIf yes, specify affected panel(s) and send sketch, and add RDPNS charge.

Is this a door and face frame (inset) application? ❏ No ❏ YesIf yes, use code RDPA-I

Optional Grill Cover must be ordered separately.

Confi guration

Cat. Code Price/SQ. FT.Refrigerator Door Panel w/Backer PanelRDPA 189*RDPA-I 236*

*Square footage is based on “overall” dimensions of RDPA.

Non-Standard RDP, RDPNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $400


24AUGUST2020© Dura Supreme Cabinetry 11-23c

90502 - Refrigerator Door Panel - Overlay + Backer Panel

• Refrigerator Door Panel + Backer Panel is a door panel (overlay) with a spacer and a 1/4” thick backer panel. The backer panel is smaller than the door panel (overlay).

• Specify dimention of Backer Panel and door (overlay) panel.

• Specify reveals if not centered.


• Inset includes Face Frame around each door/drawer.



Panel “A”

Overlay Door size: Width _____ Height _____

Backer Panel size: Width _____ Height _____

Is the Overlay Door centered on the Backer Panel? ❏ No ❏ YesIf no, specify Reveals: Top _____ Bottom _____ Left _____ Right _____

Panel “B”




Panel “C”




Panel “D”





Is this a door and face frame (inset) application? ❏ No ❏ YesIf yes, use code RDPB-I


Confi guration

Cat. Code Price/SQ. FT.Refrigerator Door Panel w/Backer PanelRDPB 189*RDPB-I 236*

*Square footage is based on “overall” dimensions of RDPB.



24AUGUST2020 © Dura Supreme Cabinetry11-23d

90503- Refrigerator Door Panel - C

• RDPC - is for doors and/or drawer fronts only.

• Specify individual door/drawer front sizes




Door “A”

Door/Drawer Front size: Width _____ Height _____

Door “B”


Door “C”


Door “D”




Confi guration

Cat. Code Price/SQ. FT.Refrigerator Door PanelRDPC 119**Square footage is based on “overall” dimensions of RDPC.



24AUGUST2020© Dura Supreme Cabinetry 11-23e

90503- Refrigerator Door Panel - C Inset - Continued

• RDPC - is for Inset doors and/or drawer fronts only.

• Specify individual door/drawer front sizes

• Includes Rails only.

• Above drawing shows standard location of rails for Inset styling.


• See page 3-36 for Flush and Beaded Inset information.

• For custom configurations, special machining, notches, ice makers, non-standard rail configurations, etc. specify Non-Standard and include a sketch.


Door “A”


Door “B”


Door “C”


Door “D”


Is this a Non-Standard Application? ❏ No ❏ YesIf yes, specify affected panel(s) and send sketch


Cat. Code Price/SQ. FT.Refrigerator Door PanelRDPC-I 149**Square footage is based on “overall” dimensions of RDPC-I




• Specify overall width and height. Maximum Height dimension = 96”. Maximum Width dimension = 48”.

• Standard frame is 2-1/4” wide stiles and rails unless otherwise specified. Minimum Stile or Rail dimension is 2”. For a customWSFO, specify width dimension for top and bottom rail, and left and right stile.

• Outside edge profile matches the door style specified for the order unless specified otherwise.

• Decorative hardware is not included or supplied.

QUOTED MODIFICATIONS ONLY

Cat. Code Price/SQ. FT.Wine Storage Frame OnlyWSFO 68**Square footage is based on “overall” dimensions of WSFO.

90510 - Wine Storage Frame Only

90550 - Appliance Panels

Integrated

Integrated - Inset

• Specify A, B, or C and overall size.

• 3/4” thick.

• Outside edge profile matches the order unless otherwise specified.

• Maximum door width with single insert = 27”Maximum height = 36”

• See page 3-36 for Flush and Beaded Inset information.

Cat. Code Price/SQ. FT.APIA 119APIB 119APIC 157

Cat. Code Price/SQ. FT.APIA-I 149APIB-I 149APIC-I 196

Available in standard wood species only.

Available in standard wood species only.

NOTE: Appliance manufacturers specification sheets will not be accepted for specification of panel information.



90640 - Cottage Bead Panel (Wainscot)• Cottage Bead Panels are 3/4” thick overall with Bead Board Molding (BBM) on one side.

Cottage Bead is NOT available on both sides.

• Front side (cottage bead) is finished standard. To finish back side of panel (same species and finishas front side), specify “Back Side Finished”, BSF.

• Nosing is available for one or both ends of panel. Overall panel size must include nosing if nosingis selected.

• For loose pieces of Bead Board Molding (BBM), see the Molding section.

Back Side Finished, BSF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add 10% to panel price

Cottage Bead Panel (Wainscot), CBP3/4

(maximum 96 wide” x 48” high, not available in Rustic Hickory) (furniture board core) . . . . . . . . . . . . . $77 /square foot

Cottage Bead Panel (Wainscot), CBP3/4PLY (maximum 96 wide” x 42” high) (veneered plywood core) . $96 /square footNosing Added, One or Both Ends Same Price, NOSING-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $126/panel



90650 - Decorative Base Panel (Wainscoting)

90660 - Doors Applied to Panel

• Decorative Base Panels are 3/4” thick with flat or raised insert panel(s) to match the door style. Exception: For mitered doorstyles, the size of stiles/rails and the insert panels will match, but the DBPS will be built with mortise and tennon construction.

• Top rail and stiles are sized to match the door style specified forthe order. Bottom rail is sized as a “Flush Toe” (4 1/2” + rail width of selected door style). Specify CSBR for no charge to convert the bottom rail to match the door style (without the flush toe).

• Available 8-1/2” through 96” wide. Insert panels are equally spaced.• Face and the two outside vertical edges are finished as standard.• If DBPS or DBP is desired with a variation in specifications, contact Dura Supreme to verify potential

limitations and additional costs.• Specify BSFDBP to finish the back side. Method of assembly is visible on back side. Finish treatments

(Glaze, Weathering, Heirloom, etc.) will not be applied to the back.• Specify Non Standard (NS) to change stile and rail and/or rail dimensions and number or size of panels.

For all other variations contact Dura Supreme to verify potential limitations and additional costs.

* Bottom rail is sized as a “flush toe” and varies to match the door style specified on the order (4 1/2” flush toe + rail width of door style).

DBPS

DBP

Panel Size # of Inserts

Panels 8-1/2” wide up to 24” wide 1 insert

Panels over 24” wide up to 39” wide 2 inserts

Panels over 39” wide up to 60”wide 3 inserts



Square Top Panel, DBPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $104 per square foot

Square Top Panel, Non-Standard DBPSNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $117 per square foot

Arched Top Panel, DBP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $104 per square foot

Arched Top Panel, Non-Standard DBPNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $117 per square foot

Convert to Standard Bottom Rail, CSBR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C

Back Side Finished, BSFDBP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Add 10% to panel price

• Include a drawing and specify door sizes, reveal around doors, and overall back panel size.

• Doors are mounted on 1/4”, 1/2”, or 3/4” thick back panels.

• Grain direction on back panel is vertical on 1/4” and 3/4” panels up to a maximum of 48” wide. Grain direction is vertical on 1/2” panels up to a maximum of 96” wide and 42” high.

• Maximum single door width with single insert in width to mount on backer panel is 27”.

• See door style section for limitations in width and height.

• Optional edge banding is available on 1/2” and 3/4” thick panels only, specify EBA (Edge Banding Applied) on order.

Cat. Code Price/SQ. FT.1/4” Backer PanelDAP1/4 1491/2” Backer PanelDAP1/2 1533/4” Backer PanelDAP3/4 162

NOTE: All DAP orders must have a specification drawing included.

Edge Banding Applied to 1/2” and 3/4” Thick Panels, EBA . . . . . . . . . . . . . . . . . . . . . . Add 10% per Edge to be Banded


08FEBRUARY2021© Dura Supreme Cabinetry 11-27

90750 - Pre-finished Wood Panels - Cut To Size

• Always specify the “cross-grain” dimension first. Specify the code to des-ignate the thickness, then specify width (cross-grain) x height (with the grain). Example: PW1/2 x 30” (cross grain) x 36” (with grain). Grain will run in the same direction as the height dimension.

• Panels are standardly finished F1S (finished on one face) as standard. Specify F2S (finish two faces) for an upcharge. Panels have #2 grade ve-neer on back - appearance may vary from front “A” grade veneer.

• Optional edge banding is available on 1/2” and 3/4” thick panels only, specify EBA (Edge Banding Applied) or EBL (Edge Banding sent loose). Edgebanded edges are always finished.

Wood PanelsPW1/4 - A2 prefinished panel - MDF - (48” x 96” maximum)

PW1/2 - A2 prefinished panel - Furniture Board Core - (48” x 96” maximum)

PW1/2CG - A2 cross grain prefinished panel - Furniture Board Core - (96” x 34-1/2” maximum)

PW1/2CG42 - A2 cross grain prefinished plywood - Veneer Core - (96” x 42” maximum)

PW3/4 - A2 prefinished panel - Furniture Board Core - (48” x 96” maximum)

PW3/4VC - A2 prefinished panel - Veneer Core - (48” x 120” maximum)

Natural Maple Supreme Coat PanelsPSCM1/4 - prefinished panel - Furniture Board Core -

(48” x 96” maximum) - Supreme Coat on one side only.

PSCM1/2 - prefinished panel - Furniture Board Core - (48” x 96” maximum) - Supreme Coat on one side only.

PSCM3/4 - prefinished panel - Furniture Board Core - (48” x 96” maximum) - Supreme Coat on two sides only.

Cat. Code Price/SQ. FT.Wood Panels1/4” ThickPW1/4 251/2” ThickPW1/2 29PW1/2CG* 35PW1/2CG42* 513/4” ThickPW3/4* 38PW3/4VC 43

*Not available in Rustic Hickory.

Finish Second Face, F2S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add 50% to Panel Price

Cat. Code Price/SQ. FT.Natural Maple S. C. Panels1/4” ThickPSCM1/4 91/2” ThickPSCM1/2 123/4” ThickPSCM3/4 16

Optional Edge Banding for 1/2” and 3/4” Thick Panels

Cat. Code Price/Lin. FT.Edge Banding LooseEBL 10

Edge Banding Applied to 1/2” and 3/4” Thick Panels, EBA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add 10% per Edge to be Banded


31DECEMBER2019 © Dura Supreme Cabinetry11-28

90800 - V-Grooved Wood Panels - Cut To SizeTOP

RIGHT

LEFT

BOTTOM

TOP

RIGHT

LEFT

BOTTOM

• V-grooved on one face only.• Always specify the “cross-grain” dimension first. Specify the code

to designate the thickness, then specify width (cross-grain) x length(with the grain). Example: VGW2P1/4 x 30” (cross grain) x 36”. Grain will run in the same direction as the length dimension.

• Panels are standardly finished F1S (finished on one face) as stan-dard. 1/4” Panel is available finished on 2 faces, Specify F2S for an upcharge. Panels have #2 grade veneer on back - appearance may vary from front “A” grade veneer.

• Single groove matches Carson V-Groove door.Double groove coordinates with Craftsman Beaded Panel door.

V-Grooved Panels

VGW2P1/4 - prefinished panel - MDF Core - (48” x 96” maximum) (F1S or F2S)

VGW2P7/16 - prefinished panel - MDF Core - (48” x 96” maximum) (F1S only)Double Single

1/4” Thick V-Grooved GW1 Panel (Single V-Grooves 3” o.c.), VGW1P1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $65 per square foot

7/16” Thick V-Grooved GW1 Panel (Single V-Grooves 3” o.c.), VGW1P7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $65 per square foot

1/4” Thick V-Grooved GW2 Panel (Double V-Grooves 2-1/2” o.c.), VGW2P1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $65 per square foot

7/16” Thick V-Grooved GW2 Panel (Double V-Grooves 2-1/2” o.c.), VGW2P7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $65 per square foot

Finish Second Face, F2S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add 50% to Panel Price

NOTE: “V-Grooved” panels are manufactured from veneered MDF (Medium Density Fiberboard) so that a uniform finish can be achieved in the v-grooves. (V-grooves are not available on a plywood panel.)

NOTE: “V-Grooved” panels are not available in Rustic Hickory. NOTE: VGW1P7/16 and VGW2P7/16 are not available in Knotty Alder.

90850 - Shiplap Panels - Cut to Size• Always specify the “cross-grain” dimension first. Specify the code to designate the thickness,

then specify width (cross-grain) x length (with the grain). Example: SLP1/4 x 34-1/2” (cross grain) x 36”. Grain will run in the same direction as the length dimension.

• Panels are standardly finished F1S (finished on one face) as standard. To finish second face, specify F2S for an upcharge. Panels have #2 grade veneer on back - appearance may vary from front “A” grade veneer.

fillers & panels crestwoodcatalog...waf3-30 409 waf3-36 458 waf3-39 503 waf3-42 503 waf3-48 545...

Documents