filter master pro 5000 - thomsongroup.com.au€¦ · curate flow and quiet operation • quality...

2
Filter Master Pro 5000 Series The Filter Master Pro 5000 low volume gravimetric air sampler, from the QAMS range by TES, is suitable for compliance monitor- ing in accordance with Australian Standard 3580.9.9.2006. The 5LPM flow rate ensures heavier paicles remain entrained and are collected onto the 37mm filter. Sample Validation is guar- anteed with each unit recording temperature, pressure and flow rate. The quick deploy design, graphical display and dedicated keypad with intuitive menu simplify on-site operation, and each FMP5000 system includes inlet jets which allow the user to effolessly inter- change between TSP, PM10 and PM2.5 fractions in the field. Key Features: Manufactured in Australia EPA Mode: Automatic 3 or 6 day runs Meteorological sensor compati- bility and logging Brushless Blower; Provides ac- curate flow and quiet operation Quality Assurance System; Flow rate, volume, temp and pres- sure logged. Visual Master Pro Remote Inteace (New!) Mains, Baery or Solar Power Australian Standards 3580.9.9.2006 Compliant Visual, Audio or SMS Alarms Available for purchase or rent! VMP is a revolutionary re- mote inteace, empowering non-techincal users to access data and adjust instrument seings at an advanced level. View the VMP brochure to find out more. QAMS EPA Mode... is a unique feature allowing the user to pre-select specific monitoring cycles by choosing a staing date and time, hours on, hours off, as well as the number of times you would like the cycle to repeat. So, if you are monitoring every 6th day, select 61 cycles, and your unit is programmed for one year! Filter Master Pro 5000 LOW VOLUME AIR SAMPLER Model FMP5100 Model FMP5150 + Lufft Model FMP5200 Visual Master Pro Software How’s the weather? We know data loggers can be costly, so we designed the FMP5000 with the ability to log all parameters with full meteo- rological Connectivity to Lufft weather sensors.

Upload: others

Post on 10-Jun-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Filter Master Pro 5000 - thomsongroup.com.au€¦ · curate flow and quiet operation • Quality Assurance System; Flow rate, volume, temp and pres-sure logged. • Visual Master

Filter Master Pro 5000 SeriesThe Filter Master Pro 5000 low volume gravimetric air sampler, from the QAMS range by TES, is suitable for compliance monitor-ing in accordance with Australian Standard 3580.9.9.2006.

The 5LPM flow rate ensures heavier pa� icles remain entrained and are collected onto the 37mm filter. Sample Validation is guar-anteed with each unit recording temperature, pressure and flow rate.

The quick deploy design, graphical display and dedicated keypad with intuitive menu simplify on-site operation, and each FMP5000 system includes inlet jets which allow the user to eff o� lessly inter-change between TSP, PM10 and PM2.5 fractions in the field.

Key Features:• Manufactured in Australia

• EPA Mode: Automatic 3 or 6

day runs

• Meteorological sensor compati-

bility and logging

• Brushless Blower; Provides ac-

curate flow and quiet operation

• Quality Assurance System; Flow

rate, volume, temp and pres-

sure logged.

• Visual Master Pro Remote

Inte� ace (New!)

• Mains, Ba� ery or Solar Power

• Australian Standards

3580.9.9.2006 Compliant

• Visual, Audio or SMS Alarms

• Available for purchase or rent!

VMP is a revolutionary re-mote inte� ace, empowering non-techincal users to access data and adjust instrument se� ings at an advanced level. View the VMP brochure to find out more.

QAMS EPA Mode... … is a unique feature allowing the user to pre-select specific

monitoring cycles by choosing a sta� ing date and time, hours on, hours off , as well as the number of times you would like the cycle to repeat. So, if you are monitoring every 6th day, select 61 cycles,

and your unit is programmed for one year!

Filter Master Pro 5000LOW VOLUME AIR SAMPLER

Model FMP5100 Model FMP5150

+ Luff t Model FMP5200

Visual Master Pro Software

How’s the weather? We know data loggers can

be costly, so we designed the FMP5000 with the ability to log all parameters with full meteo-rological Connectivity to Luff t

weather sensors.

Page 2: Filter Master Pro 5000 - thomsongroup.com.au€¦ · curate flow and quiet operation • Quality Assurance System; Flow rate, volume, temp and pres-sure logged. • Visual Master

Annual CalibrationTES’s unique design allows annual

calibrations to be pe� ormed on site by the user. A new pump and internal

filter are sent to the customer who then pe� orms a temperature, pres-

sure and flow calibration to complete the annual calibration. Alternatively, TES can pe� orm the entire annual

calibration.

PURCHASE A MESA BIOS FLOW METER AT THE SAME TIME AS YOUR DMP FOR

SPE

CIAL

DIS

COUN

T!

QAMS by TESMaster Pro Range

MMP1000 SeriesMET MASTER PRO DATA LOGGERSFMP5000 SeriesLOW VOLUME FILTER SAMPLERDMP6000 SeriesREAL-TIME SINGLE CHANNEL PHOTOMETERDMP7000 SeriesREAL-TIME FIVE CHANNEL PARTICLE COUNTERHVMPHIGH VOLUME AIR SAMPLER

Filter Master Pro 5000 Specifi cationsPM Fraction Measurements Measures all popular PM frac-tions including; PM1, PM2.5, PM4, PM7, PM10 and TSP. TSP, PM10 and PM2.5 inlets supplied with the unit as standard. (One used at a time.)Simultaneous PM ChannelsNot applicable on this model. Use DMP7000 Series for simulta-neous measurement of five PM fractionsFlow Rate5.0 litre per minute Venturi Con-trolled (default), user adjustable from 2 to 8 lpm Flow AccuracyPrecision automatic flow con-trol to within +/- 1%Barometric PressureBuilt-in barometer for ambient static pressure measurements for precise flow controlTemperature Probes:2 Channels: RTD (PT100)Data DownloadData can be polled or automat-ically and continually pushed to your server.Display Type128 x 64 bit low energy graphical LCD displayKeypad / User Inte� ace12 bu� on function with keysGravimetric Filter Sampling Integrated filter holder, 37mm filter ca� ridge Internal Data Logging8MB internal data logging with full flash memory backup. Time and date stamped and capable of logging data from the various analogue and digital inputs Data Logging IntervalFully user adjustable from 5 to 999 secondsExtended Data LoggingTES are happy to cooperate with other data logger suppliers to allow integration of our system into existing networks.

Power RequirementsConsult TES for specificsPower OptionsMains Power, Ba� ery Power or Solar Power (all waterproof)Mains Power - Operates from 80 to 260 VAC and is fully weath-erproof.Ba� ery Power – Standard or Po� able. Includes rechargeable ba� ery, regulator and ba� ery box. ‘Standard Ba� ery System’ provides approx. 210 hours of operation.‘Po� able Ba� ery System’ provides approx. 48 hours of operation.Solar Power System provides continuous operation based on average of >4.5 hours of sunlight per day, and will continue for up to 3 days no sun. System includes Solar Panel & Stand, Ba� ery & Ba� ery box, RegulatorPump Demand<0.2 amp @ 12VDCMeteorological InputsMultiple channels including wind speed, wind direction, hu-midity, temperature, precipita-tion, barometric pressure, solar radiation, evaporation, sigma theta, lightning & more.Digital Inputs3 optically isolated inputs, voltage freeRelay Contacts3 relay contacts (NC/COM/NO) Alarm 1 set pointAlarm 2 set pointInstrument fault ale� Communications2 x RS232 digital po� s, RS485/ RS422 and analogueIInputs2 x RS232, RS485, 2 x Analogue Inputs (0 to 5 volt or 4-20mA [jumper selectable]), 2 x Count-er Channels, 2 x PT100 & SHT75X Inputs Included.

Outputs3 x Analogue Outputs ( 0 to 5 volt or 4-20mA [jumper select-able]), RS232 Output, Ethernet Module Optional, 3 x Solid State Relays for Audio and Visual AlarmsAlarm Capabilities3G / NEXTG SMS messaging to mo-bile phone, external siren, visual beacon and email ale� sEnclosure TypeNEMA4 / IP66 ratedTripod or Post MountingMay be easily mounted on a 50mm diameter post or on TES transpo� able heavy duty tripodNIOSH 5040 Capable Sampling Yes, using 37mm filter casse� e Optional Inlet HeadsPM1PM2.5 (supplied with unit)PM4PM7PM10 (supplied with unit)TSP (supplied with unit) More upon requestWeightSystem 7KgHeated inlet 1.0KgDimensions Width 300mmDepth 200mmHeight 350mmOperating Conditions-10 to 50 deg C temperature range0 to 95% humidity rangeFlow Calibration Method Mesa BIOS Defender Flow CalibratorShipping Dimensions: FMP5000: W x 50, D x 40 , H x 30cm, 5kg Tripod:W x 16, D x 16 , H x 155cm, 8kgLuff t Sensor Mounting Arm: W x 70, D x 21 , H x 10cm, 3.5kgLuff t Weather Sensor:W x 42, D x 27 , H x 22cm, 3kg (Approx.)

QAMS byThomson Environmental Systems

[email protected]

H.O: 02 9526 8199

Filter Master Pro 5000LOW VOLUME AIR SAMPLER