filtration systems for
TRANSCRIPT
17
F-701R
343SERIES 'DF'FILTRATION SYSTEMS
TYPICAL INSTALLATIONSYSTEM OPERATION
This system is totally automatic and responds to wide variations in flow rate and solids concentration. Pump the contaminated solution to the diffuser tray which distrib-utes flow across the full width of the filter bed. Particle separation starts immediately via gravity flow through the media to the clean reservoir below the conveyor frame. Filtered solution can then gravity drain to waste or be returned to the process via a pump.
Gravity flow allows gentle accumulation and settling of solids on the filter fabric. The concave configuration of the media bed accommodates the flow rate and maximizes solids loading on the fabric. As the media gradually be-comes laden with solids, the solution level will slowly rise until the float switch activates the convey or drive motor. Consumed fabric is advanced to the sludge box as fresh media is simultaneously indexed to the solution flow.
MODEL DF-1.5
MODEL DF-11
AUTOMATIC DISPOSABLE FABRIC FILTRATION SYSTEMS FOR:
PHOSPHATING / PARTS WASHERS MACHINE TOOL COOLANTS INDUSTRIAL WASTE WATER
PROCESS OR COOLING WATER WATER WALL SPRAY BOOTHS
TREATED PLATING WASTE
● Unattended operationAutomatically indexing media allows continuous filtration, even with varying input or solids content.
● Choice of materials Carbon steel, 316 stainless steel, CPVC or polypropylene
● Sizes for any application From 1.5 to 113 sq. ft. of filter surface area
● Low operating cost
17
F-701R
344
SERIES 'DF' FILTRATION SYSTEMS
FABRIC MICRON RATING
CARBON STEEL reservoir, frame, shafts, bearings and sprockets. Models 1.5 to 11 feature a 316 stain-less steel conveyor belt. Larger models have galvanized belt with optional 304 or 316 stainless steel belt. Units are coated with corrosion resistant 2-part epoxy paint.
316 STAINLESS STEEL reservoir, frame, shafts, bearings, sprockets and conveyor belt. Non-wetted surfaces such as fabric bracket, motor bracket and gear reducer are carbon steel.
CPVC frame, polypropylene reservoir, conveyor belt and sprockets, Delrin® bearings, HDPE sludge box. PVC shafts on Model 1.5, 316 stainless steel shafts on Models 4 and larger.
POLYPROPYLENE reservoir, frame, sprockets and conveyor belt. Delrin® bearings, PVC shaft, HDPE sludge box. Available in 1.5 size only.
SERIES S
SERIES SS
SERIES CPP
SERIES PP
All units include: float switch, sludge box (HDPE on Models 1.5 and 4), a filtrate reservoir which serves as a support for mount-ing the conveyor frame, drain, single phase drive motor and starter. Standard edge seals are PVC, 140°F maximum. EPDM and silicon rubber edge seals are optional. Order filter media separately.
Model DF-1.5
Models DF-4 to DF-113
SPECIFICATIONS
FILTERMODEL
FILTERAREA
TANKCAPACITY
115V/1/60DRIVE
MOTOR
OVERALLDIMENSIONS (INCHES)
INLETHEIGHT
(INCHES)
MEDIAWIDTH
APPROX.SHIPPINGWEIGHT
FABRIC MICRON RATING
LENGTHA
WIDTHB
HEIGHT5 10 25 40 80
SQ. FT. GAL. HP C IN. LBS. GPM FLOW RATEDF-1.5DF-4
1.54
2049
1/151/3
5575
21.528
35.540
1719
1316.5
225320
25
36
410
614
923
DF-8DF-11
811
90115
1/31/3
7190
5050
4040
1919
3333
580760
1014
1217
2028
2839
4562
DF-15DF-16.5
1516.5
130160
1/31/3
9890
4467
4040
1819
3350
9401025
1920
2325
3842
5358
8593
DF-19DF-24
1924
160200
1/31/3
89104
6262
4040
1818
5050
10251420
2430
2936
4860
6784
108136
DF-27DF-29
2729
400500
1/21/2
136162
6868
5252
3030
5050
24003110
3436
4144
6873
95102
153164
DF-40DF-57
4057
600900
1/23/4
194259
6868
5252
3030
5050
37505250
5071
6080
100143
140200
226323
DF-96DF-113
96113
13701575
3/41
380427
6868
5252
3030
5050
77008655
120142
144160
240286
336400
544646
17
F-701R
345
SERIES 'DF' FILTRATION SYSTEMS
ORDER DISPOSA-FABRIC MEDIA SEPARATELY, use Price Code No.
* Add width to Model No. - Example: SF-W125-13" See Flow Rate Chart and Micron Selection Guide
OPTIONAL EQUIPMENT
TO ORDER, use Price Code Number
See page 4 for reservoir pumps.
FILTERAREA
(SQUAREFEET)
SERIES S SERIES SS SERIES CPP SERIES PP
MODELPRICE
CODE NO.MODEL
PRICECODE NO.
MODELPRICE
CODE NO.MODEL
PRICECODE NO.
1.548
11
DFS-1.5-SDFS-4-SDFS-8-SDFS-11-S
49-141449-100049-100349-1006
DFS-1.5-SSDFS-4-SSDFS-8-SSDFS-11-SS
49-1413A49-1038A49-1040A49-1042A
DFS-1.5-CPPDFS-4-CPPDFS-8-CPPDFS-11-CPP
49-113949-005949-006049-0061
DFS-1.5-PP––––––
49-1415––––––
1516.519
––DFS-16.5-SDFS-19-S
––49-100749-0015
––DFS-16.5-SSDF-19-SS
––49-1043A49-0048A
DF-15-CPP––DF-19-CPP
49-0062––
49-0064
––––––
––––––
24272940
DF-24-SDF-27-SDF-29-SDF-40-S
49-001849-002149-002449-0027
DF-24-SSDF-27-SSDF-29-SSDF-40-SS
49-0050A49-0052A49-0054A49-0056A
DF-24-CPPDF-27-CPPDF-29-CPPDF-40-CPP
49-006549-006649-006749-0068
––––––––
––––––––
5796113
DF-57-S DF-96-SDF-113-S
49-003049-007449-0075
DF-57-SS––––
49-0058A––––
DF-57-CPP––––
49-0069––––
––––––
––––––
RA
YO
N /
PO
LYE
ST
ER
BL
EN
D
CO
AR
SE
MODELNO. *
MICRON
-13" WIDTH* -16 1/2" WIDTH* (LOTS OF 2 ONLY) -33" WIDTH -50" WIDTH*
YARDSPER
ROLL
PRICECODE NO.
WEIGHT(LBS)
YARDSPER
ROLL
PRICECODE NO.
WEIGHT(LBS)
YARDSPER
ROLL
PRICECODE NO.
WEIGHT(LBS)
YARDSPER
ROLL
PRICECODE NO.
WEIGHT(LBS)
SF-W125SF-W105SF-W090
12510590
100100100
49-0257 1B49-0258 1B49-0259 1B
222
500500500
49-0090 1B49-0093 1B49-0165 1B
11.511.512.0
500500500
49-0091 1B49-0094 1B49-0166 1B
232323
500500500
49-0092-1B49-0095-1B49-0167-1B
353535
SF-W080SF-W055
8055
100100
49-0260 B49-0262 B
22
500500
49-0099 B49-0105 B
9.010.5
500500
49-0100 B49-0106 B
1821
500500
49-0101 B49-0107 B
2732
ME
DIU
M SF-W040SF-W025SF-W020
402520
100100100
49-0263 B49-0264 B49-0265 B
222
500500500
49-0108 B49-0111 B49-0070 B
12.014.518.0
500500500
49-0109 B49-0112 B49-0071 B
242936
500500500
49-0110 B49-0113 B49-0072 B
364455
FIN
E SF-W010SF-W005SF-W001
1051
505050
49-0266 B49-0267 B49-0268 B
222
200200200
49-0114 B49-0117 B49-0120 B
14.017.527.5
200200200
49-0115 B49-0118 B49-0121 B
283555
200200200
49-0116 B49-0119 B49-0122 B
435384
PO
LYP
RO
SF-P080SF-P055
8055
100100
49-0260 BPP49-0262 BPP
22
500500
49-0099 BPP49-0105 BPP
9.010.5
500500
49-0100 BPP49-0106 BPP
1821
500500
49-0101 BPP49-0107 BPP
2732
SF-P040SF-P025SF-P020
402520
100100100
49-0263 BPP49-0264 BPP49-0265 BPP
222
500500500
49-0108 BPP49-0111 BPP49-0070 BPP
12.014.518.0
500500500
49-0109 BPP49-0112 BPP49-0071 BPP
242936
500500500
49-0110 BPP49-0113 BPP49-0072 BPP
364455
DESCRIPTION PRICE CODE NO.
FLOAT ACTIVATED LEVEL CONTROL SWITCH FOR RESERVOIR PUMPNEMA 4. For single phase motors to 11/2 HP @ 115V or 2 HP @ 230VAC. Used as a pilot device on three phase magnetic motor start-ers. Complete with float ball and mounted in reservoir tank for pump-down operation. Separate motor starter is required for 3-phase motor (see below).
49-0162
RESERVOIR PUMP INSTALLATION AND WIRING 49-0173
MOTOR STARTER FOR RESERVOIR PUMP3 phase with transformer and 24VAC control circuit1 phase with transformer and 24VAC control circuit
O-MS3P-SO-MS1P-S
EDGE SEALS
Models 1.5 - 8Models 11 - 16.5
EPDM200OF max.
SILICON RUBBER3000F max.
49-0500 A49-0651 A
49-0500 B49-0651 B
CONVEYOR BELTSFor Series DF-19S through DF-113S (Standard belts are galvanized steel.)304 stainless steel316 stainless steel
ADD TO MODELADD TO
PRICE CODE NO.
-304-316
BC
17
F-701R
346
SERIES 'DF' FILTRATION SYSTEMS
RESERVOIR PUMPS (not installed)
NOTE: 1/15 HP to ¾ HP motors are 1 phase, 1 HP and up are 3 phase. 3 phase motors require a separate motor starter.
FLOW RATE
90µ 105µ 125µ
80µ
55µ
40µ
25µ10µ 5µ
1µ
FABRIC SELECTION
SIZING INSTRUCTIONS:1. Select the desired micron retention fabric from the
chart above.2. Using the Flow Rate chart on the preceding page,
determine the flow per square foot for the selected viscosity and fabric.
3. Divide the total flow (GPM) you desire by the num-ber obtained in step 2. The resultant is the size, in square feet of filter area your Automatic Fabric Filter should have.
FLOW HORSEPOWER CAST IRON POLYPROPYLENE CPVC
GPM @ TDH (ft.) CI PP & CPVC MODEL PRICECODE NO.
MODEL PRICECODE NO.
MODEL PRICECODE NO.
515244075
1111202420
1/151/41/23/42
1/5–
1/33/42
SCI 1.5SCI 4SCI 8SCI 15SCI 24
49-014949-015049-015149-015349-0156
E 3/4PP––
EOPP1EOPP3EOPP4
45-0030A––
39-1121 A39-1123 C39-2124 J
E3/4C––
EOC1EOC3EOC4
45-0027 1A––
39-1221 A39-1223 C39-2224 J
115145200
352535
235
25
7 - 1/2
SCI 29SCI 40SCI 57
49-0158 A49-0159
49-0160 A
EHP2EHP5
––
45-062345-0645
––
EHC2EHC5EHM2
45-012345-014545-1211
APPLICATIONMICRON SELECTION GUIDE
125 105 90 80 55 40 25 10 5 1
Paint spray booth - waterZinc & iron phosphating
WA
TE
R S
OL
UT
ION
S● ● ● ●
●
●
● ● ●
Caustic washing solutionsWaste treat - metal hydroxide
● ● ● ● ● ● ●
● ● ● ●
Grinding - steelGrinding - cast iron
● ● ●
●
●
●
●
●
●
●
●
●
●
●
Grinding - aluminumGrinding - carbide
● ● ●
●
●
●
●
●
●
●
Belt grinding - steelBelt grinding - zinc
● ●
●
●
●
●
●
●
●
●
●
●
Grinding - hard plasticsGrinding - soft plastics ●
●
●
●
●
●
●
●
●
Grinding - steel rollGrinding - brass ● ●
●
●
●
●
●
●
●
●
●
Grinding - bronzeGrinding - aluminum ● ●
●
●
●
●
●
●
●
● ●
Lapping (Oil 30 - 100)Honing (Oil 20 - 100)
OIL
100-
150
SS
U
●
●
●
●
●
●
●
●
●
●
QuenchingGrinding - aluminum ● ● ●
●
●
●
●
●
●
●
●
●
Belt grinding - steelBelt polishing - zinc copper
● ● ●
●
●
●
●
●
●
●
● ●
Belt grinding - steelThread grinding - steel
OIL
150-
250
SS
U
●
●
●
●
●
●
Flute - tap die grindingCrush & form grinding
●
●
●
●
●
●
Machine toolturning/milling
SY
NT
HE
TIC
● ● ● ● ●
Registered Trademark: Derlin - DuPont
17
ROLL-A-FILTER©F-703D
MEDIAWIDTH
Inches
10590805540251051
8040
5 - 10
150150150150150150757575
15015075
49-0175-149-0178-149-018149-018449-018749-019049-019349-024049-0243
———
W105W090W080W055W040W025W010W005W001N080N040N010
49-0177-149-0180-149-018349-018649-018949-019249-019549-024249-0245
———
APPROXIMATEMICRON RATING
Typical applications include:
PARTNUMBER
PRICE CODE NUMBERAPPLICATION FEETPER ROLL 18" 24" 36"
Straining paint / Coarse filtrationFine straining / Paint filtration / Light oilCoarse filtrationCoarse filtrationMedium filtrationFine filtrationVery fine filtrationUltra fine filtrationUltra fine filtrationHigh temperature operation (to 400°F)Chemical applications (Fabrics have chemi-cal resistance of nylon 6.6)
49-0176-149-0179-149-018249-018549-018849-019149-019449-024149-024449-019649-019749-0198
Minimum order - 2 rolls
DISPOSABLE FABRIC MEDIA (Order separately)
TO ORDER
28 x 19 x 528 x 25 x 547 x 25 x 547 x 37 x 559 x 37 x 5
1824243636
RAF-2SRAF-3SRAF-4SRAF-5SRAF-6S
PRICECODE NO.
79-027879-027979-028079-028179-0282
2-1/33-1/4
69
12
FILTERING AREA
Sq. Ft.
Simply place the ROLL-A-FILTER on top of an open drum or recirculating tank and pour or route the liquid to be filtered into the filter tray. When the filter fabric accumulates enough solids, as indicated by the liquid pool, pull it forward, tear/cut it off and discard. The handles on the filter media support basket provide an easy and clean method of lifting and discarding the sludge laden media.
All units are made of heavy gauge steel, and are designed with inte-gral clean catch basin with center discharge hole. Units conveniently install over sumps to eliminate frequent cleanout.
STRAINING - Paints & varnishes
FILTERING - Chemicals, cutting and grinding fluids, oil
PILOT TESTING - Waste treatment, phosphating
SHIPPINGWEIGHT
1934466174
MODELNUMBER
NOMINALDIMENSIONS
L x W x HInches Lbs.
RA
YO
NN
YL
ON
PO
LY-
ES
TE
R
Steel construction coated with chemically re-sistant, oven cured two-part epoxy paint.
Heavy duty perforated steel filter media support basket with handles
Rugged steel support frame and sloped bottom basin
Safe tear bar / cutting guide
Models RAF-2S & -3S conveniently fit standard 55 gallon drums
●
●
●
●
●
USING DISPOSABLE FABRIC MEDIA
For further purification or recycling efforts, coalescing filters to separate liquids (i.e. oil/water) are available. Consult Application Engineering Department.
Note: Flow capacities vary greatly depending on liquid and volume of solids.
347
17
SERIES 'CB' CARTRIDGE / BAGFILTRATION SYSTEM
● COMPLETELY PRE-ENGINEERED AND ASSEMBLED
● QUICK CHANGE REUSABLE FILTER MEDIA MEANS FAST PAYBACK
● PERMITS WATER REUSE
● PREVENTS NOZZLE PLUGGING
● PROVIDES BETTER CLEANING
● PREVENTS POLLUTION
● NO BACKWASH REQUIRED
● AVAILABLE WITH AUTOMATIC ON / OFF PUMP CONTROL
The Cartridge / Bag system is a 2-stage liquid-solid separation system designed to provide high solids loading capabilities for applications requiring recirculat-ing filtration of a process reservoir. Typical applications include the removal of particles from glass and plastic in bottle washing operations and the removal of board fiber, wheel grit, copper and other metals from water used in PC board deburring and scrubbing equipment.
The first stage employs a primary filter tank con-taining 8 gravity flow filter bags to collect bulk particles separated from rinse water. This stage provides 17.6 ft.2 of filter surface area and is capable of filtering particles from 100 micron to 5 micron, depending upon the mi-
FEATURES: ● Flow control valve
● High solids loading
● Vinyl coated steel baseCB FILTRATION
SYSTEMPC BOARD OR BOTTLE
SCRUBBER
For recirculating filtrationon a reservoir
Shown withcover open
cron rating of the filter bags selected. The filter bags are attached to a manifold with cam-lock quick-disconnect couplings for minimal down-time when servicing. The manifold includes an overflow vent which prevents back-up of system flow.
A circulating pump can be manually activated, or automatically activated with an optional level control, to transfer the filtered water from the primary filter tank to the second stage.This stage consists of a final trap filter chamber which uses a 2 micron pleated paper filter cartridge with 32 sq. ft. of surface area to polish the water so that clear water can be recycled to the process or discharged to a drain.
F-601H
348
17
F-601H
MOTORTEFC, 1.0 HP
3450 RPM @ 60 Hz2850 RPM @ 50 Hz
MOTORTEFC, 1.5 HP
3450 RPM @ 60 Hz2850 RPM @ 50 Hz
2750
2751
115-230V/1/60230V/460V/3/60
380V/3/50
O-1490
O-MS1PO-MS3P
PRICECODE NO.DESCRIPTION
LEVEL CONTROL (motor starter required) Automatic on / off pump controlMOTOR STARTER Watertight push button, 115-230V/1/50-60 230-460V/3/50-60Note: Add -S to motor starter PCN when ordering motor starter for use with O-1490 level control, i.e., O-MS3P-S
FILTER MEDIA (Bags ordered separately, 1 cartridge included in original equipment.) Bags - Polypropylene, size 7" x 16" (8 req'd) 5 micron 10 micron 25 micron 50 micron 100 micron Replacement pleated cartridge 2 micron (1 required)
88-0848A88-0848B88-0848C88-0848D88-0848E
Entire system constructed ofcorrosion resistant materials
for long service life.
Pump-MotorMotor Starter
(Optional)
32-1/2"(826mm)
51"(1295mm)
Reservoir & PrimaryBag Filters
2" NPTInlet
Final FilterChamber
1/2" NPTDrain
1" NPT Outlet
13-1/2" (343mm)
50"(1270mm)
TOP VIEW
2" NPT Inlet
2-5/8"(67mm)
SPECIFICATIONS
19" (483mm)
29"(737mm)
OPTIONAL
SIDE VIEW
PRIMARY FILTER TANK
Eight 5, 10, 25, 50 or 100 micron polypropylene filter bags (order separately) with quick-disconnect couplings provide 17.6 sq. ft. (1.6 sq. m) total area primary filtration by gravity flow to a 36" x 24" x 32" (914 x 610 x 813 mm) deep polyethylenereservoir. Reservoir provided with cover.
AVAILABLE WITH: PVDF CENTRIFUGAL PUMP
Provides 30 U. S. GPM at 18 PSI @ 60 Hz (95 LPM at 1.2 bar @ 50 Hz) with Viton® mechanical seal and "O"-ring. Flow control valve on 1" PVC pipe between pump and final filter.
or NORYL® SELF-PRIMING CENTRIFUGAL PUMP
Provides 30 U. S. GPM at 21 PSI @ 60 Hz (95 LPM at 1.4 bar @ 50 Hz) with Viton® mechanical seal and "O"-ring. Flow control valve on 1" PVC pipe between pump and final filter.
FINAL TRAP FILTER CHAMBERConstructed of PVC with quick opening swing bolts and tee handles. Supplied with pressure gauge. Includes one 4" x 36" pleated paper filter cartridge of 2 micron, 32 sq. ft. (3.0 sq. m.) expanded filter area.
VINYL COATED STEEL BASEApproximate shipping weight - 200 lbs. (91 kg.)
PRICECODE
NO.
CBF 65x58 1½x1½K3V(M2)-C1.5
CBF 65x58 1½x1½K3V(M2)-D1.5
MODEL with PVDF end suction
'K' pump
TO ORDER, use Price Code Number
36"(914mm)
PL436-2-4
Motor Starter(Optional)
115-230V/1/60 230V/460V/3/60
380V/3/50
PRICECODE NO.
2733
2734
MODEL with NORYL self- priming
'G' pump
CBF 65x58 GNOKCVN-C1.0
CBF 65x58 GNOKCVN-D1.0
349
SERIES 'CB' CARTRIDGE / BAG FILTRATION SYSTEM (cont’d)
17
RECESSED PLATEFILTER PRESS F-705R
Biological SludgeMetal Hydroxide SludgeLime Treated Sludge
AVERAGEDRY WEIGHT/CUBIC FOOT
The Recessed Plate Filter Press will compact sludges to a dry cake with a density that is depen-dent upon the ultimate compaction pressure and the characteristics of the particular sludge. Each pressload will require from 2-4 hours cycle time. To insure adequate time, the press should be sized for at least 8 hours working capacity.The table and formula below can be utilized to size your press. To confirm your sizing and evaluate the process for your application with a laboratory-sized model,
contact the Application Engineering Dept. to ar-range a pilot test. Presses feature structural steel frame, coated with tough chemical resistant epoxy paint. High density molded polypropylene filter plates are light weight and corrosion resistant. Special polypropyl-ene quick cake release filter cloths. Air actuated hydraulic system for parting and closing the filter plates. Automatic self-compensating hydraulic system. Conveniently located operator control console.
TO SIZE YOUR PRESS, the following information is required:
● MANUAL HYDRAULIC 0.6 to 3 cu.ft.expandable
● SEMI-AUTOMATIC 1 to 50 cu.ft. expandable
● AIR BLOWDOWN MANIFOLD
● CORROSION RESISTANT
● 40-60% SOLIDS CONCENTRATION
● LOW ENERGY REQUIREMENT
● EASY DROPOUT CLEANING
WASTE & SEWAGE TREATMENTBREWING / CEMENT / CERAMIC MINING & PLATING INDUSTRIESFOOD & VARNISH PROCESSING
CHEMICALS
LIQUID / SOLID SEPARATION FOR:
A. Total gallons to be processed in selected press in specified period, e.g., U.S gals./8 hours. Twenty-four hours can be used to insure adequate capacity.
B. Percent by weight of filterable suspended solids.
C. Average dry weight per cubic foot for a particular sludge (obtained from table.)
SLUDGE TYPE% OF CAKE
DRY WEIGHTSOLIDS
15-2525-4015-60
152530
CALCULATIONS:
Model 25-48PPwith optional pneumatic
plate spreader
A X B X 8.33 LBS./GAL. C
(U.S. GALS./ 8 HRS.) X ( % SUSPENDED SOLIDS) X 8.33 LBS./GAL.
(AVERAGE LBS. DRY WT. / CUBIC FT.)OR
CU. FT. CAPACITY FOR A DURATION
=
350
17
F-705R
1-24PP2-24PP3-24PP4-24PP5-24PP6-31PP8-31PP
10-31PP15-31PP20-31PP25-48PP30-48PP40-48PP50-48PP
DIMENSIONS (IN.)
37
101417121620304021253442
46
1219
43-080443-080543-080643-0807
DESCRIPTION
IN-OUT NPT& SQUAREPLATE SIZE
43-064143-064243-064443-0649
DESCRIPTION PRICE CODE NUMBER
FOR PLATE SIZEPneu. plate spreaderSafety light curtains
Replacement cloth Non-gasketed Gasketed
SF-U48*SF-U48*G
43-066243-0670
43-0671
Automatic pump control 3 stage 4 stage
Hydraulic interlock for feedpump air supply
55-7120A55-7144A55-7208
43-066743-0648
Air diaphragm pump, Polypropylene w/nitrile See Bulletin P-605Drum disposal system w/extended legs & carbon steel chute for 1 to 5 cu. ft. size
Self-dumping sludge hopper (Order 2X press capacity)
½” - 14 GPM 1” - 40 GPM 2” - 135 GPM
43-0668
Manual hydraulic 18”Semi-automatic 24”
48”43-065843-0661
18”--
SF-U18*SF-U18*G
SF-U24*SF-U24*G
24”43-0680
-
31”43-065643-0659
SF-U31*SF-U31*G
Expander piece (For the future addition of up to 10 plates)** Additional plates (each)
43-067343-0677
43-067243-0676
43-067443-0678
43-067543-0679
PRICE CODE NO.
Consult Application Engineering Dept. for options not shown, such as high pressure units, catwalks, drum carts, etc.
PRESS-FULL indicator
6 cu. ft.10½ cu. ft.21 cu. ft. (Cu. ft. capacity of dumpster is 32 cu. ft. total of 2 hopper units provided)
CUBICFEET 1
0.61.02.03.0
123456810152025304050
NOTE: Air blowdown connections are ½” NPT on all models.
1½” x 1”18½”(470mm)
32
2½” x 1½”24” (610mm)
3” x1½”31½”(800mm)
1 Based on 1¼” thick filter cake.
3” x 2”48” (1200mm)
A B C D E F
24 49 31
37415573
52567087
39
48
66
31
40
58
56
63
86
30
30
35
8493
100107116109119129154179133144169191
57677480898292
102127152105116141163
MANUAL HYDRAULIC
NON-GASKETED GASKETED
PRICE CODE NUMBER
43-0804G43-0805G43-0806G43-0807G
43-060143-060243-060343-0604A43-0605A43-060643-060843-061043-0615A43-0620A43-0625A43-0630A43-064043-0650
43-0601G43-0602G43-0603G43-0604AG43-0605AG43-0606G43-0608G43-0610G43-0615AG43-0620AG43-0625AG43-0630AG43-0640G43-0650G
MODEL
0.6-18PPMH1-18PPMH2-18PPMH3-18PPMH
OPTIONAL EQUIPMENT
SLUDGE HOPPER Self-dumping hoppers to transfer compacted solids from the press to a large roll-off type container. The hoppers, specifically engineered for each class of press, are easily moved with forklift truck and dumping is accomplished merely by a trip handle.
AUTOMATIC PUMP CONTROL Allows progressively increasing air pressure on diaphragm pump to attain a denser, drier cake.
DRUM DISPOSAL SYSTEM For presses up to 5 cubic feet. Includes chute and extended legs to raise press to permit adequate clearance for a drum.
PLATE SPREADER, SAFETY LIGHT CURTAIN, PRESS-FULL INDICATOR and HYDRAULIC INTERLOCK are additional features on some models.
TO ORDER, use Price Code Number
SEMI-AUTOMATIC
NO. OFCHAMBERS
8008509401060
APROX.WEIGHT(LBS.)
1700190020502150230042004450490055006000
11,38011,85013,10014,000
DIMENSIONS
* To designate cloth position, add to Price Code Number: H Head T Tail M Intermediate**Expander piece for maximum of 7 plates for manual hydraulic 18” size plates .
RECESSED PLATE FILTER PRESS
351
17
LABORATORYFILTER PRESS F-710C
For Lab Analysis - Small Batch Production - Field Testing
flow control valve, hoses, manual hydraulic pump and drip pan. Entire assembly is mounted on a vinyl coated steel base. Flow pattern is corner inlet with three individual corner discharge lines.
Dimensions: 42" (1.1m) L x 13" (.33m) W x 22" (.56m) HShipping Weight: 95 Lbs (43 kg.)Maximum operating temperature: 150° F (66° C)
● PLATE AND FRAME DESIGN Dual capacity- Can be used with one or two frames for adjusted volume - .01 cu. ft. (283 cm3) or .02 cu. ft. (566 cm3) Area per frame - 17in2 (110 cm2)
● INCLUDES POLYPROPYLENE PLATES AND FILTER CLOTH Suitable for most waste solutions
● AIR DIAPHRAGM PUMP Polypropylene construction Flows adjustable to 5 GPM (15.7 LPM) Pressure adjustable to 60 PSI (4.22 kg/cm2)
The Lab Filter Press is designed for lab analysis and small batch production. This press is also very useful for testing for upscaling to full production-size semi-automatic or manually operated presses. Includes polypropylene plates, filter cloth, air diaphragm pump, pneumatic controls, pressure gauges, inlet
LAB FILTER PRESS PRICE CODE NO.
MODEL .02 - 7PPMH 43-0857
REPLACEMENT CLOTHS(Set of 4)
PRICE CODE NO.
43-0822SF - 7 x 7
TO ORDER Hydraulic Operation
Pressure GaugeFlow
Control Valve
Air Filter / PressureRegulator
Pressure Gauge
DiaphragmFeed Pump
Test Slurry
Drip Pan
352