Home About us Products Careers Contact us Feedback Sitemap

CHEMICAL PROCESS INDUSTRIESMajor applications include, but not limited to Mineral, Paint & pigments, Pharmaceutical, Bio-technology, Petrochemical, Food and food processing,Fertilizers, Sugar, Distillery, Edible oil, Coal, Cement, Engineering, Metal finishing, Oil-water separation,Coolants, Textile processing, ETP, STP etc.

Salient Features :Effective separation and recovery Pneumatic or hvdro-pneumatic cakedewateringClosed chamber filtration, cake washing anddewatering

Reduces exposure of hazardous streams

Easy CIP cleaning and quick change over inmultiple product applications

Avoids cross contamination

Leakless chamber locking arrangement Roll form reusable filter clothUniform and horizontal cake formation Least 0 & M costsEasy inert gas blanketing MOC as per requirement

Other

Operation :The upper chamber is Feed chamber and the lower one is Filtrate chamber. A suitable reusable filtercloth is operational in between the chambers. Depending upon the configuration, one of the chamber iskept fixed and the other moved up & down. The moving chamber is assisted with locking arrangement.The operation of filter can be broadly divided into 4 stages. Filtration, cake washing, dewatering anddischarge. Additional sequences can be adopted depending upon requirement

Filtration :Feed and filtrate chamber are held pressed with each other with reusable filter cloth in between them.Liquid Is fed in the feed chamber. Suspended solids start getting accumulated on the filter cloth. Clearfiltrate passes into the filtrate chamber and flows out. After sufficient build up of cake sensed bypressure switch or the time limit. whichever happens earlier, filtration cycle comes to an end.

Cake washing :Cake wash liquid is fed Into feed chamber for effecting replacement cake washing. Washed liquid can becollected separately. Multiple type cake washing can also be done.

Dewatering :The formed cake inside the feed chamber is squeezed either pneumatically or hvdro-pneurnancatlv. Allthe held up liquid inside chamber and the voids of suspended solids is removed out and taken for furtherprocessing. Hot air can now be fed into the chamber for further drying of solids.

Discharge :The locking dts-enqaqas the two chambers. Drive motor starts to discharge Out the solids.After complete discharge the two chambers close in again to start the next cycle.

Applications : Valuable chemicals Solvents Hazardous chemicals Multiple product lines R & d and pilot plant applications For ascertaining vario LIS filtration parameters Dynamic, ever changing and confidential product development All industries having filtration unit operation

Phosphating Bath Filtration, Custom Built Filtration Systems, Pune, India

http://www.konarkfiltersindia.com/kobelt-rfm-pro.html

Chemical Process Industries : KOBELT - RFM - PRO | KORUBELT | Kobelt - Pro - LL | Other Filters | Metal Finishing Line : KOBELT - RFM - 20 | PHOSOHOFIL+ |Engineering Fluid Filtration : Konsep Automatic | KONSEP-Mnl | CRM - 100 | Squeeze Press | Kosepoil | Effluent Treatment Sludge Dewatering : KOBAG | KOBELT - SQ -

TWIN | KOBELT-PLUS | Kombelt-mono | Kobag | Kompax | Other Filters | Home | About us | Careers | Contact us | Feedback | SitemapDesigned by : MID Hosted by : GID Promoted by : PBD

Phosphating Bath Filtration, Custom Built Filtration Systems, Pune, India

http://www.konarkfiltersindia.com/kobelt-rfm-pro.html