final training manual1
TRANSCRIPT
-
8/12/2019 Final Training Manual1
1/20
PMAS-UAAR-UIMS
FIRE SAFETY AND PREVENTIONSTr ainers Manual
Prepared By:
Haroon Amjad 09-ARID-898
Kashif Mehmood 09-ARID-910
Bilal Raza 09-ARID-889
JUNE 12, 2014XYZ
ABCD
-
8/12/2019 Final Training Manual1
2/20
1 | P a g e
Table of ContentsTraining Session Plan ........ .................................. 2
Ice Breaker .. 3
Introduction to fire... 4
Classes of fire. .7
Fire prevention measures. 8
Emergency evacuation . 9
Evacuation drills.10
Prevention of fires. .11
Good housekeeping.15
Fire Extinguishers.. 16
How to use a fire extinguish er 17
Emergency First aids.. 18
Responsibilities of wardens 19
Fire safety signs ..20
-
8/12/2019 Final Training Manual1
3/20
2 | P a g e
Training Sessions Plan:
Training will be based of two days having two sessions. Details are as follows.
Major Topics to be covered during the training:
IntroductionWhat is Fire?
Fire Hazards
Classes of Fire
Evacuation
Fire Prevention
Fire Fighting Equipment
Classes of ExtinguishersFirst Aid for Burns
Practical Demos
- Day 1 (Session 1)o Session time 2 hourso Topics to be covered
Introduction Housekeeping The Chemistry of Fire Fire Hazards Assessing Fire Risks Evacuating personnel Staff Accounting Assembly areas
- Day 2 (Session 2)o Session time 2 hourso Topics to be covered
Basic fire prevention Essentials of firefighting
Firefighting equipment, type and use Fire extinguishers including practical demos First Aid for Burns Role of Wardens Open Discussion
-
8/12/2019 Final Training Manual1
4/20
3 | P a g e
Objectives of Training and a Brief Introduction:
- Conducting fire safety and prevention training is a prudent and wise step to close the gapin having a Safety culture.
- People play the most important role in protecting company assets and preventing fires inthe workplace.
- Numerous cases happened where due to staff carelessness, fires have happened causingmajor damage and financial loss.
Why is this training needed?
Due to uncertainty or sudden fire in:
- Data Centers- Personal computers- Electric Short Circuit-
Dustbin on fire- Generators
Who are to be trained?
- Executive officers- Engineers- Support Executives- Receptionists- Desk Job Personnels - Office Boys- Admin Staff- Security Guards
Ice Breaker:
Ask individuals that have they ever been victim of fire or have they seen any fire incident by theireyes
Ask if they have faced the incident with themselves and what did they do to tackle the incident.
Ask them if this happened with them in future what they would do.
If there are fire alarms in the building, ring the alarms in the first session start or second sessionstart.
-
8/12/2019 Final Training Manual1
5/20
4 | P a g e
Introduction
The mission of our fire safety program is to broadly increase fire safety awareness, reducethe risk and number of fires, reduce loss of life, injury and property damage through educationtraining and inspection as well as policy and standard development. Our strategy to reduce fire
deaths and injuries is to focus on prevention by identifying and rectifying unsafe behaviors. Fire prevention training includes instructions on what should be done to reduce the potential for ignitionand fuel loads. Participants are trained to recognize potentially hazardous situations such assmoking, about open flames and candles as well as cooking fires including poor housekeeping
practices
What is a Fire?
A fire is a chemical reaction between a flammable material, Oxygen and a heat source. When the heat source reaches a certain temperature, it ignites the flammable material and
a fire starts. (Flashpoint)
Good & Bad traits of fires
The Fire Tetrahedron
Four things must be present at the same time in order to produce fire1. Enough oxygen to sustain combustion2. Enough heat to raise the material to its ignition temperature3. Some sort of fuel or combustible material, and4. The chemical, exothermic reaction that is fire
Oxygen, heat and fuel are frequently referred to as the fire triangle. Add the fourth element, the
chemical reaction, and you actually have the fire tetrahedron. The important thing to rememberis when you take any of these four things away, you will not have a fire, or the fire will beextinguished.Essentially, fire extinguishers put out fires by taking away one or more elements of the firetriangle/tetrahedron. Fire safety, at its most basic, is based upon the principle of keeping fuelsources and ignition sources separate.
-
8/12/2019 Final Training Manual1
6/20
5 | P a g e
Take Away One and . no fire !
Fires Can Happen Anywhere
Homes Offices Airplanes Ships Apartments Vehicles More common, where?
Recent Major Fires
Karachi Ali Enterprises, 280 killed Lahore 28 killed Islamabad Airport 10Oct12 2 killed Wateen Telecom Head Office, Lahore Shaheed e Millat Secretariat, ISB Warid Regional Office, Blue Area, ISB Gakkhar Plaza, Rawalpindi 2007
-
8/12/2019 Final Training Manual1
7/20
6 | P a g e
Taj Hotel, Mumbai Wateen HQ, Lahore
Group Exercise on fire Hazards:
Causes of Fire / Risks Poor Housekeeping (Flammable Waste) Paper Metals Cigarettes / Cigars Oils / Fuels Chemicals Severe Weather / Lightning Wood Electrical Gas Arson Cutting / Welding Sparks Open Flames Children playing with matches/lighters Heaters
Some Stats A Fire Brigade is called every 17 seconds somewhere in the US. Approx. 1,800,000 fires every year in the US. Smoking is the leading cause of fire related deaths Most residential fires and injuries happen due to cooking. Most fires happen in residences. F ir st Fi re Brigade and F ir e Engine Cincinnati, OH in 1853
Classes of FireThere are five classes of fires. All fire extinguishers are labeled using symbols for the classes offires they can put out. A red slash through any of the symbols tells you the extinguisher cannot be
-
8/12/2019 Final Training Manual1
8/20
7 | P a g e
used on that class of fire. A missing symbol tells you only that the extinguisher has not been testedfor that class of fire.1. Class A fires involve paper, wood, and other ordinary combustibles.
2. Class B fires involve flammable liquids, such as gasoline, oil, and some paints and solvents.
3. Class C fires involve energized electrical equipment such as power tools, wiring, fuse boxes,appliances, TVs, computers, electric motors, etc.
4. Class D fires involve combustible metals, such as magnesium, potassium, and sodium.
5. Class K fires involve grease in commercial cooking equipment.
FIRE PREVENTION MEASURES
Program StrategiesFires require fuel, an adequate oxygen supply, and an ignition source to start. Fire prevention isaccomplished by maintaining control over one of the three required elements that, when broughttogether, cause fires. The strategies we follow will include the following:
1. Implement a program that targets preparation, prevention and emergency preparednessand evacuation.2. Proper handling of combustible and flammable materials.3. Proper handling and control of all ignition sources.4. Implement safe housekeeping practice that reduces the risk of fire danger.
-
8/12/2019 Final Training Manual1
9/20
8 | P a g e
5. Install a reliable fire protection system and maintenance procedures.6. Disseminate fire safety information through education, training and other means ofawareness program.
Fire Prevention Plan:
The purpose of the plan is to eliminate the causes of fire and prevent loss of life and property by fire. The plan provides faculty, staff and students with information and guidelineswhich will assist in recognizing, reporting and controlling as well as eliminating the causes of firesand fire hazards.
Program Elements will include:1. Identifying potential fire hazards one of which is the proper handling of combustible and
flammable materials.2. Control and proper usage of ignition sources mainly electricity which is the major
ignition source in all occupancies. Ignition sources also exist in chemical and mechanical forms.Smoking, open flames like candles and hot burners as well heat producing elements.
The major causes of fire at the workplace include poor housekeeping, improper storage and use offlammable materials, overloaded electrical outlets and extension cords, misuse of heat producingappliances including space heaters, unsupervised cooking, and improper disposal of smokingmaterials on campus grounds. Implementing fire prevention measures is the key in an attempt toinsure ones personal safety.
Prevention Measures Make certain that a copy of the "Fire and Emergency Procedures" is posted in a conspicuouslocation on each floor. Have an understanding and knowledge of the contents of the "Fire and Emergency Procedures." Recognize all possible risks associated with an activity or process and eliminate it by controllingsources of ignition and properly managing combustible and flammables. Regularly observe emergency evacuation routes, fire extinguishers, and emergency and exitlights. Immediately report any missing equipment or any other problems discovered to EH&S. Encourage occupants to actively parti cipate in fire drills that are conducted regularly. Regularly observe the lobby, corridors, stairwells, and keep them clear of obstructions. Regularly observe all exits to keep them clear of obstructions AT ALL TIMES. Report any tampering with the fire alarm, smoke detection and suppression systems to EH&S.
-
8/12/2019 Final Training Manual1
10/20
9 | P a g e
Regularly observe fire doors to make certain they are closed at all times; report inoperable doorsto Physical Plant or the respective maintenance offices. Inspect offices in search of:
o Overloaded circuits
o Frayed or damaged electrical cordso Improperly used extension cordso Improperly used appliances
EMERGENCY EVACUATION PROCEDURESThe purpose of the Emergency Evacuation Procedures is to establish minimum requirements thatwill provide a reasonable degree of life safety from fire and similar emergencies in Florida AtlanticUniversity buildings and structures. The Emergency Evacuation Procedures will be utilized toevacuate all occupants during a fire emergency. Failure to leave the building when a fire evacuationalarm is sounding is a violation of state law.
Emergency Evacuation
General Information
What conditions may warrant evacuation of a building? Fire, Bomb Threat, Hazardous Material Spill, Hostile Intruder, Utility Failure, etc.
What should I know about the building evacuation plan? KNOW the evacuation plan of the building and where to find it. (Consult Building SafetyPersonnel) KNOW the location of all exits for the building. KNOW the locations of emergency equipment (i.e., fire extinguishers, pull stations,emergency telephones, etc.). KNOW the location of the assembly area outside the building. ASSIST and participate in fire drills.
What should I do to initiate a fire alarm to evacuate a building? Activate Fire Alarm Pull Station Located At Various Places Along Exit Routes.
Individuals Requiring AssistanceWhat should I know as an individual requiring assistance? LEARN the locations of exit corridors, exit s tairways and designated areas of refuge. PLAN an escape route. TELL a co -worker or instructor how to assist you in case of emergency.
-
8/12/2019 Final Training Manual1
11/20
10 | P a g e
What should I do, as an individual requiring assistance, during a building evacuation? WAIT near the closest st airway, entrance or designated area of refuge and wait forassistance from others.
What should I know/or do to help individuals requiring assistance? KNOW the needs and capabilities of people requiring assistance who are routinely in
your work area. ASK how you can help anyone requiring assistance before giving it The orderly exit of people from a building, locality or confined space, carried out to prevent
casualties. Fire drills ensure the efficient and safe use of the exit facilities available in thecase of an emergency.
Proper drills ensure orderly exit under control and prevent the panic that has beenresponsible for much of the loss of life in major fire disasters
Evacuation Drills Shouts of Fire, Panic Alarms, etc. Orderly fashion, single file
Leave belongings No elevators Assembly Areas
Primary, Secondary Ideally 100m/300ft away Must be Marked
People with Disabilities Checking of Floors Staff Accounting Going back inside upon clearance
Evacuation Diagram Sample:
-
8/12/2019 Final Training Manual1
12/20
11 | P a g e
Smoke Inhalation
Most deaths occur due to smoke inhalation, not the actual fire. Lie down low and crawl your way out Cover your mouth and nose with a damp towel or cloth
Prevention of Fires
Install Smoke and heat detectors Dont burn wood or leaves around your premises When using decorative lighting, turn off before going to sleep. Clean and adjust thermostats. Check any heaters for problems, keep 3ft away from any combustibles. Have a Fire Safety Plan and share/discuss Avoid Smoking near hazardous material/indoors Keep matches/lighters away from children
Use FR Cables Know your exits both at home and office Fire Brigade know your Emergency numbers
Good House Keeping
Fire doors must be kept closed at all times unless they are held open by an approved deviceconnected to the fire alarm system.
Exits, stairways and passageways leading to and from exits must be kept free ofobstructions at all times. Furnishings, decorations, combustible objects, or flammablesmust not block exits, access to exits, or any means of egress.
Dispose of all trash as soon as possible in trashcans or dumpsters. Waste materials mustnever be piled in corridors or stairwells while awaiting removal.
Flammable materials should be present in the work area only in the quantities required forthe day s job. These materials must be placed in an approved storage area at the end ofeach day.
Materials must not obstruct sprinkler heads or be piled around fire extinguishers, fire alarm pull stations, or sprinkler and stand pipe control values. To obtain proper distribution ofwater from sprinklers, a minimum of 18 inches of clear space is required below sprinklerdeflectors.
Keep all exits clear and immediately accessible. Keep a 36 inch clearance around all electrical panels. Make sure fire extinguishers are easily accessible and items are not stored on them. Make sure emergency lighting is not obstructed by storage items. Keep stairs clear of debris and storage items. Cut down/remove weeds and brush from around buildings. Remove excessive dust, cobwebs, and other potential combustibles. Keep chemicals (cleaners, pesticides, etc.) away from ignition sources.
-
8/12/2019 Final Training Manual1
13/20
12 | P a g e
Smoking Make sure cigarettes are discarded in the designated area. Make sure the cigarette is completely out when leaving it. Do not smoke while fueling your vehicle. Only smoke in designated areas so that hot ashes do not come in contact with
combustible items.
Electrical Wiring and Appliances Supervisors should periodically inspect all electrical equipment and cords to ensure proper useand safe conditions. Improper use of electrical devices to obtain more outlet capacity can result inoverloaded circuits and fire. The use of extension cords should be minimal and used only when a flexible, temporaryconnection is necessary. The cord and the outlet should be checked periodically to ensureoverheating is not occurring. Extension cords cannot be used for fixed wiring, and should never
be tacked, stapled, tied, hidden under rugs or draped over pipes or other supports, fastened to orthrough woodwork, ceilings or walls. When there is a permanent need of an electrical outlet, one
should be installed through proper work order or minor project request. Extension cords are permitted to be used as permanent wiring at any time. However surge protectors are permitted. They must plug directly to a wall outlet and the equipment must bedirectly plugged into the surge protector. All surge protectors are to be UL listed and bear the ULsymbol. The following are some of the items that are not permitted.
o Three way outlet splices (the little box that makes one plug into three)o Outlet boxes (usually silver box with 4 plugs on top and a long black cord)o Home use extension cords (usually brown, green or white light weight cords)o Heavy duty extension cords (when not being used temporarily)
Be sure all electrical equipment is properly grounded. If any evidence is found of frayed, crackedor damaged wiring or electrical outlets, the equipment affected should be taken out of service untilrepairs are made.
Space heaters, coffee makers, microwave ovens, toasters and all other appliances with exposedheating elements should never be left unattended while in operation. Space heaters should not be
placed under desks or in other enclosed areas. These appliances should be unplugged after eachuse and stored only after they are cool enough to touch. They should be operated away fromcombustible materials such as files, curtains, trash containers, etc., AND MUST BE KEPT ATLEAST 3 FEET AWAY FROM ALL COMBUSTIBLE AND FLAMMABLE MATERIALS.
-
8/12/2019 Final Training Manual1
14/20
13 | P a g e
Data Center: (Fire Outcomes)
Fire Safety equipment:
-
8/12/2019 Final Training Manual1
15/20
14 | P a g e
Whats Wrong here?
Make Sure Your Cabling & Wiring is Well Organized
Surviving a Fire How to Survive a Fire Dont get trapped Dont delay evacuation Cover your mouth and nose with a damp cloth (when possible) Keep low to the floor Dont hide Be determined to survive; willpower, adrenaline. If clothes catch fire: Stop, Drop and Roll Onc e out of the building, dont re -enter till Clearance is given by Safety & Security
In charge!
-
8/12/2019 Final Training Manual1
16/20
15 | P a g e
Types of Extinguisher
Different types of fire extinguishers are designed to fight different classes of fire. The extinguishermust be appropriate for the type of fire being fought.
Pressurized water extinguishers are being phased out because they do not work with class B andC fires. They can be used for ordinary combustibles like wood, paper, many plastics, cloth andrubber.
Carbon dioxide extinguishers are generally used in areas of sensitive electrical or electronicequipment since it is gas and leaves no residue that damages the equipment. Carbon dioxidefunctions by removing or displacing the oxygen in a fire. It is a non-flammable gas, extremelycold.
Dry chemical fire extinguishers are by far the most common on campus. ABC or multipurposefire extinguishers are effective on all three classes of fires. Dry chemicals function by interrupting
the chain reaction of the fire tetrahedron. The extinguishers are pressurized with nitrogen gas asan expellant. They can be used on class A, B and C fires. Dry chemical extinguishers put out fires
by coating the fuel with thin layer of chemical dust. This in turn separates the fuel from the oxygenin the air. The powder has also the ability to interrupt the chemical chain reaction of the fire. Theseare the most common extinguishers found on campus since they are very effective at extinguishingfires.
K-Class Extinguisher: A K Class extinguisher contains a wet chemical that is composed of potassium based solution. They are used on kitchen fires that involve high temperature cookingoils and deep fat fryers. The solution provides both a cooling effect on the fire as well as forming
a blanket on top of the fire cutting off the oxygen.Fire Extinguisher:
-
8/12/2019 Final Training Manual1
17/20
16 | P a g e
How to Use a Fire ExtinguisherIt is easy to remember how to use a fire extinguisher if you can remember the acronym PASS ,which stands for PULL, AIM, SQUEEZE , and SWEEP .
PASS Method P Pull the pin. Hold the extinguisher with nozzle pointing away
from you and release the locking mechanismA Aim low. Point the extinguisher at the base of the fireS Squeeze the lever slowly and evenlyS Sweep the nozzle from side to side.
-
8/12/2019 Final Training Manual1
18/20
17 | P a g e
Rules for Fighting FiresFires can be very dangerous and you should always make certain to not endanger yourself or otherswhen attempting to put out a fire. For this reason, when a fire is discovered:
Assist any person, who is in any immediate danger to safety, if it can be accomplishedwithout risk to you. Activate the building fire alarm system or notify the fire department by dialing 911. Whenyou activate the building fire alarm system, it will automatically notify the fire departmentand get help on the way. It will also sound the building fire alarm system to notify otheroccupants, and it will shut down the air-handling units to prevent the spread of smokethroughout the building. Only after completing the above two, you may use an extinguisher if you are trained andthe fire is small.
However, before deciding to fight the fire, keep these rules in mind:
NEVER FIGHT A FIRE IF: You do not know what is burning and you do not know what type of fire extinguisherto use. Even if you have an ABC extinguisher, there may be something in the fire, whichcould explode or produce toxic smoke. Chances are you know what is burning, or at leasthave a pretty good idea, but if you do not know, let the fire department handle it. The fire is spreading rapidly beyond the spot where it is started. The time to use thefire extinguisher is in the recipient, or beginning stages of the fire. If the fire is spreadingquickly, it is best to simply evacuate the building, closing windows and doors as you leave.
Do Not Attempt to Fight a Fire Unless
You have had recent hands-on training with fire extinguishers & fire is only in incipientstage Check Smoke density
You have the correct extinguisher for the type of fire You are absolutely sure you can put the fire out, AND You will not endanger yourself or others
-
8/12/2019 Final Training Manual1
19/20
18 | P a g e
Burn Injuries and Scarring
First Aid for Burns
Immediate COLD WATER Avoid covering with any cloth till completely dry Avoid ointments/lotions for the first 8 hours Degrees of Burns 1st, 2nd, 3 rd Hospital Acid Burns similar Scars/Infections
Responsibilities of Wardens
Be a Coordination point for Safety in their respective areas. Maintain an updated list of staff in their area/floor. During emergencies/evacuations, Wardens will be responsible for their floor count
and making sure everyone has left. Report any emergencies, safety issues as soon as they become known. Assist any staff with mobility impairment. Brief Emergency Services, Safety or Security staff with full details of incident. Attend Safety briefings when scheduled. During an emergency, wear identification clothing, e.g. jacket, arm band, etc. Raising Alarms
-
8/12/2019 Final Training Manual1
20/20
19 | P a g e
Fire Safety Signs: