final workshop - communion project 18 july net … · roel baas. afpt 10.35 to 10.45 h temperature...
TRANSCRIPT
SUMMARY
The main objective of the European project ComMUnion has been to develop a novel solution for the manufacture of multi-material 3D components, metal/thermoplastic carbon fibre composite in a productive manner and streamlining the cost, dealing with the whole value chain.
The purpose of this Workshop is to present the final results achieved. Among the results obtained it is found a new multi-stage robotic solution with flexible and high performance surface conditioning cell and a multi-scale modelling system. ComMUnion has showed, also, the possibilities of recycling/reuse of the components and achieve a completely automated multi-material 3D connection technology for its application in automotive and aeronautics. The system developed in the project will reduce by 20% the consumption of critical and high cost materials.
ADDRESSED TO
Addressed to professionals, companies, technology providers, clusters and research institutes in the automotive and aeronautical sector.
PLACE
GESTAMP R&D Barcelona
Poligono Industrial Can Estella
Passatge Edison, 4
08635 Sant Esteve Sesrovires (Barcelona)
DATE AND SCHEDULE
Date: 18th of July 2019
Schedule: from 09.20 to 14.30 hours
REGISTRATION
Free Registration. Limited seating.
To formalise the registration, please, fill out the form and send it to [email protected] before the 24th of June.
On the 4th of July, the registration will be confirmed to the attendants.
18 JULY2019
Barcelona
FINAL WORKSHOP - COMMUNION PROJECTNet-shape joining technology to manufacture 3D multi-materials components based on metal alloys and thermoplastic composites
SUMMARY
The main objective of the European project ComMUnion has been to develop a novel solution for the manufacture of multi-material 3D components, metal/thermoplastic carbon fibre composite in a productive manner and streamlining the cost, dealing with the whole value chain.
The purpose of this Workshop is to present the final results achieved. Among the results obtained it is found a new multi-stage robotic solution with flexible and high performance surface conditioning cell and a multi-scale modelling system. ComMUnion has showed, also, the possibilities of recycling/reuse of the components and achieve a completely automated multi-material 3D connection technology for its application in automotive and aeronautics. The system developed in the project will reduce by 20% the consumption of critical and high cost materials.
ADDRESSED TO
Addressed to professionals, companies, technology providers, clusters and research institutes in the automotive and aeronautical sector.
PLACE
GESTAMP R&D Barcelona
Poligono Industrial Can Estella
Passatge Edison, 4
08635 Sant Esteve Sesrovires (Barcelona)
DATE AND SCHEDULE
Date: 18th of July 2019
Schedule: from 09.20 to 14.30 hours
REGISTRATION
Free Registration. Limited seating.
To formalise the registration, please, fill out the form and send it to [email protected] before the 24th of June.
On the 4th of July, the registration will be confirmed to the attendants. These Projects have received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 680567. The dissemination of the project herein reflects only the author’s view and the Commission is not responsible for any use that may be made of the information it contains.
PROVISIONAL AGENDA
09.00 to 09.20 h Welcome coffee & Registration of attendees
09.20 to 09.30 h Opening Ricardo Molina. AUTOTECH (GESTAMP)
09.30 to 09.45 h ComMUnion at a glance Pilar Rey. AIMEN Technology Centre
09.45 to 10.00 h New materials and joining processes for automotive sector Ricardo Molina. AUTOTECH (GESTAMP)
10.00 to 10.15 h Advanced multi-material structures for aeronautic Industry Pedro Bonillo. ACITURRI Communion supply chain technologies
10.15 to 10.25 h Texturing/Cleaning process Steffen Wagner. LUNOVU
10.25 to 10.35 h Tape placement process Roel Baas. AFPT
10.35 to 10.45 h Temperature close loop control with IR cameras Carlos Fernández. NIT
10.45 to 10.55 h Quality diagnosis system Carmen Pérez. TECNATOM
10.55 to 11.05 h VCSELS heat assisted system Armand Pruijmboom. PHILIPS
11.05 to 11.15 h CAx solutions Jean Claude Morel. MISSLER
11.15 to 11.25 h Multi-material & Multi-scale simulation Sebastian Müller. ESI
11.25 to 11.35 Industrial cell integration Rui Cancela. MOTOFIL
11.35 to 12.30 h Lunch
13.00 to 14.00 h Demonstration of prototype ComMUnion production cell
14.00 to 14.30 h Q&A/Discussion/Closing
ORGANISES: