finishes key

4
F S C W FINISHES KEY WALL FLOOR SKIRTING F: FLOORS F4:NON SKID TERRAZZO TILES 250x 250 x22mm "Union Tiles code LV22EJ' non-slip and factory bevelled terrazzo tiles or EQUAL AND APPROVED laid with approved grouts and cements by specialist to strictly comply with manufacturer's instructions and incorporate matching ribbed tread CARPET CEMENT SAND SCREED 30mm thick polished cement sand screeds to comply with Government standard specifications. EXTERNAL CONCRETE PAVERS EXTERNAL INTERLOCKING PAVERS 60mm thick interlocking pavers, 25mpa, manufactured to SABS spec 058, coloured with a synthetic iron oxide pigment as supplied by 'Kwena Concrete Products' or EQUAL AND APPROVED, pattern to the Architect's approval.

Upload: shumba-mutumwa

Post on 18-Apr-2015

16 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: Finishes Key

F

S

C

W

FINISHES KEY

WALL

FLOOR

SKIRTING

F: FLOORS

F4:NON SKID TERRAZZO TILES

250x 250 x22mm "Union Tiles code LV22EJ' non-slip and factory

bevelled terrazzo tiles or EQUAL AND APPROVED laid with

approved grouts and cements by specialist to strictly comply with

manufacturer's instructions and incorporate matching ribbed tread

CARPET

CEMENT SAND SCREED

30mm thick polished cement sand screeds to comply with

Government standard specifications.

EXTERNAL CONCRETE PAVERS

EXTERNAL INTERLOCKING PAVERS

60mm thick interlocking pavers, 25mpa, manufactured to SABS

spec 058, coloured with a synthetic iron oxide pigment as supplied

by 'Kwena Concrete Products' or EQUAL AND APPROVED,

pattern to the Architect's approval.

S: SKIRTINGS

Page 2: Finishes Key

HARDWOOD

CEMENT SAND SCREED

75mm high by 20mm thick hardened cement screed coved skirting

forming a continuous joint with the adjoining floor screed, painted

to approval.

to approval.

S3:INERIOR USE CERAMIC TILES

C: CEILINGS AND CORNICES

EMULSION (PVA) PAINT ON PLASTERED SLAB

3 No. coats of emulsion paint (to comply with SABS 1586 or later

revision) spec. grade 1 matt finish on 6mm thick light weight hemi-

hydrate gypsum plaster on off-shutter concrete slab.

3 No. coats of "Dulux' gloss enamel paint or equal and approved

applied on primmed plastered surfaces in accordance to

Manufacturers’ instructions.

tile where there is change of level

manufacturer's instructions

30mm thick cement screeds in strict compliance with

F1

F2:

Solution dyed nylon (SDN) carpet laid on

F3:VINYL TILES

300 x 300 semi flexible vinyl tiles laid with approved adhesive

on screed

F4:INTERIOR USE CERAMIC TILES

Page 3: Finishes Key

250 x 100 x 8mm thick "Colour Beige" ceramic tiles laid on

22mm thick screeds

F5:TERRAZZO

Coloured Terrazzo cast insitu with screed,

complete with plastic dividing strips

50mm thick precast concrete pavers on sand blinding

on compacted sub-base

F6

F7:EXTERIOR USE QUARRY TILES

330 x 330 x 8mm thick QUARRY TILES with

adhesives and grout on 22nn thick screeds

F8:

S1

S2TERRAZZO

75mm high by 20mm thick hardened TERRAZZO coved skirting

forming a continuous joint with the adjoining floor terrazzo

100mm high ceramic tile skirting , matching floor tiles, all laid with

adhesives and grout

S4:

Ex 75 x 20mm moulded meranti hardwood skirtings with

with19mm Meranti quadrant beading, all painted

EXTERIOR USE QUARRY TILES

100mm high cut quarry tile, matching floor tile all laid with

adhesives and grout

S5:

Page 4: Finishes Key

C1:

SUSPENDED CEILINGS

600x 1200x 4 mm thick fibre panels

suspended in an open T-grid system and all accessories

SOFTBOARD CEILING

6.4 mm soft boards panels, nailed+countersunk to timber brandering

with painted timber cover strips on joints all painted with PVA

C3:

C2:

W: INTERNAL WALLS

W1:GLAZED TIMBER PARTITIONS

Timber framed partitions with veneered blockboard to 900mm height

3mm glazing above to 2100mm height and glazed/ blockboard

fanlight. All veneer and timber varnished

ALKYD (ENAMEL) PAINT ON PLASTERED WALLS

W2:

W3:PAINTED WALLS & TIMBER PARTITIONS COMBINATION

Room with combination of Painted walls (W2) and Timber

Partitions (W1)