fire nozzle - ati fire products · foam: the viper ® blue devil nozzle can be used as a foam...
TRANSCRIPT
Fire Nozzle Catalog
Serving America’s Best for over 50 years.
ATIFNCAT0319
2 www.atifireproducts.com 888.229.96559 Vose Farm Road · Peterborough, NH 03458-0090
Premium Quality Selectable Gallonage Nozzle
Blue Devil®
• Multiple flow selections and stream patterns.• Manufactured with highest quality anodized aluminum
and a long lasting protective surface to provide protection against corrosion.
• Versatile Selectable Flow Nozzles • Constant Gallonage In All Flow & Pattern Settings
• Patented Rylstatic® System For A Superior Fog Pattern• Superior Quality Valve With Dual Seat & Dual Drive
Shaft• Designed & Built To Meet NFPA 1964 & UNE EN
15182-2 Type 3 Requirements
Flow Settings: The flow rate can be set through an easy grip ring featuring preset positions. The flow ring has a raised lug to identify the maximum flow setting in low visibility conditions. The FLUSH mode is used to ensure that any debris is flushed from the nozzle to avoid pattern disruptions or flow reductions.Stream Pattern: The nozzle stream is adjusted by rotating the bumper giving the firefighter the widest fog pattern (Full Fog – Protection) to the narrowest fog pattern (Narrow Fog and Straight Stream). The bumper has a raised lug to identify the Narrow Fog in low visibility conditions. The VIPER BLUE DEVIL series comes standard with the innovative patented fog pattern called RYLSTATIC®. RYLSTATIC® is a system that gives you a uniform water fog with smaller water droplets and less friction loss than other traditional systems. VIPER BLUE DEVIL® nozzles have been designed to offer a broader fog shield of protection to the firefighters. Traditional spinning teeth are available as an option on all VIPER BLUE DEVIL® nozzles. Ring Markings: Markings on the flow selector ring and the pattern ring are laser engraved onto anodized aluminum to ensure they are easy to read and will not fade.Lot Number: Every nozzle is marked with a lot number before leaving the factory. This number can be used for traceability purposes.
Shut Off Valve: The valve has a dual seat and dual driven shaft to offer better performance against water hammers and to enhance its durability. The valve itself is a low maintenance product with a stainless steel ball valve (except for the 2 ½" size which utilizes a highly engineered polymer resin ball) operated through an OPEN/CLOSE lever. The operation is smooth and constant allowing firefighters to open and close the valve easily. Stainless Steel Inlet Screen: A stainless steel screen is mounted within the inlet to prevent material from entering the nozzle which reduces the risk of damage or failure during operation. Inlet Options: The VIPER® BLUE DEVIL® selectable flow nozzles are available with the following standard threads: • NST/NH Female • NPSH/IPT Female • BSP FemaleAdapters can be supplied for and are available upon request:• STORZ Couplings • Special ThreadsThe swivel inlet allows the nozzle to rotate continuously while connected to the hose.
3
ATIFNCAT0319
www.atifireproducts.com 888.229.96559 Vose Farm Road · Peterborough, NH 03458-0090
Premium Quality Selectable Gallonage Nozzle
1" VIPER BLUE DEVIL®*
Nozzle Model
Length Weight Swivel Inlet (in.)
Nozzle Flow Effective Reach
inch cm lbs kg gpm lpm ft m
BD550 8.27 21 3.75 1.70 1"
5 25 52 1615 50 66 2030 125 75 2350 175 89 27
BD 1330 8.27 21 3.75 1.70 1"13 50 66 2023 90 72 2230 115 79 23
BD 1560 8.27 21 3.75 1.70 1"
15 50 66 2030 100 79 2345 160 82 2560 210 92 27
*Perfect performance even at 40 bar (580 psi)
1 ½" VIPER BLUE DEVIL®
Nozzle Model
Length Weight Swivel Inlet (in.)
Nozzle Flow Effective Reach
inch cm lbs kg gpm lpm ft m
BD 3012 9.53 24.2 4.52 2.05 1 ½"
30 115 79 2360 230 92 2795 360 115 33125 465 128 37
BD 3015 9.53 24.2 4.52 2.05 1 ½"
30 115 79 2360 230 92 2795 360 115 33125 470 128 37150 560 131 38
BD 7515 9.53 24.2 4.52 2.05 1 ½"
75 280 99 2995 360 115 33125 470 128 37150 560 131 38
BD 9520 11.00 28 6.61 3.00 1 ½”
95 360 115 33125 470 128 37150 560 131 38200 750 138 39
Foam: The VIPER® BLUE DEVIL® nozzle can be used as a foam nozzle with the addition of the optional Foam Tube. The nozzle works well with pre-mixed solutions or with Inline Eductors.Approvals and Standards: The VIPER® BLUE DEVIL® nozzle complies with NFPA 1964 and is manufactured in an ISO9001 accredited facility. EN15182-1 & EN15182-2 type
3 Certificate available by request. Service and Maintenance: The VIPER® BLUE DEVIL® nozzle requires minimal maintenance during operation provided the unit is regularly flushed with clean water after being used with foam or contaminated water. Service kits are also available.
ATIFNCAT0319
4 www.atifireproducts.com 888.229.96559 Vose Farm Road · Peterborough, NH 03458-0090
Premium Quality Selectable Gallonage Nozzle
2 ½" VIPER BLUE DEVIL®
Nozzle Model
Length Weight Swivel Inlet (in.)
Nozzle Flow Effective Reach
inch cm lbs kg gpm lpm ft m
BD 9520 2 ½" 12.99 33 7.28 3.30 2 ½"
95 360 115 33125 470 128 37150 560 131 38200 750 138 39
BD 12250 2 ½” 13.36 34 7.28 3.30 2 ½"
125 470 128 37150 560 131 38200 750 138 39250 950 144 41
The Effective Reach measured in feet is at 100 PSI, while the effective reach measured in meters is at 6 Bar (85 PSI).The RYLSTATIC® System is a low maintenance system.
The innovative RYLSTATIC® System is patented technology.
5
ATIFNCAT0319
www.atifireproducts.com 888.229.96559 Vose Farm Road · Peterborough, NH 03458-0090
SPARTAN
Fixed Orifice, Lightweight, Constant Flow Fire Hose Nozzle
The new fixed orifice, lightweight, constant flow fire hose nozzle from ATI.• Excellent stream performance at a variety of pressures
ranging from 50 PSI (3.5 bar) to 100 PSI (7 bar)• Enhanced with patented Rylstatic® System for a superior
fog pattern• Durable construction provides low maintenance with no
spinning teeth to break • Versatile, easy to use and available in four models with
over 40 flow and pressure configurations to meet any demand
• Complies with NFPA 1964 and European standards EN-15182-1 and EN-15182-2 Type 2
• Fulltime rocker lug swivel with ergonomic pistol grip • Raised protective rubber bumper lug for easy pattern
identification • Lightweight, hard coat anodized aluminum • 5 year warranty
MODEL50 PSI 75 PSI 6 BAR 100 PSI
INLET WEIGHT (lbs./ea.)GPM GPM LPM GPM
VIPER SPARTAN 25
19 5 1" 2.7250 15 1" 2.72150 30 1" 2.72250 60 1" 2.72
VIPER SPARTAN 95
60 60 250 60 1 ½" 3.5375 75 360 75 1 ½" 3.5395 95 400 95 1 ½" 3.53
125 500 125 1 ½" 3.53
VIPER SPARTAN 150
95 95 1 ½" 4.96125 125 500 125 1 ½" 4.96150 150 550 150 1 ½" 4.96
175 650 175 1 ½" 4.96750 200 1 ½" 4.96
VIPER SPARTAN 250 200 200 950 250 2 ½" 5.73
ATIFNCAT0319
6 www.atifireproducts.com 888.229.96559 Vose Farm Road · Peterborough, NH 03458-0090
Premium Quality Selectable Gallonage Nozzle
ATTACK
• Versatile Light Weight Selectable Flow Nozzles• Superior Quality Valve With Dual Seat & Dual
Driven Shaft
• Maintenance Free Patented Rylstatic System for an Exceptional Fog Pattern
• Designed & Built to Meet NFPA 1964 & UNE EN 15182-2 Type 3 Requirements
Flow Settings: The flow rate can be set through an easy grip ring featuring preset positions. The flow ring has a raised lug to identify the maximum flow setting in low visibility conditions. The FLUSH mode is used to ensure that any debris is flushed from the nozzle to avoid pattern disruptions or flow reductions.Stream Pattern: The nozzle stream is adjusted by rotating the bumper giving the firefighter the widest fog pattern (Full Fog – Protection) to the narrowest fog pattern (Narrow Fog and Straight Stream). The bumper has a raised lug to identify the Narrow Fog in low visibility conditions. The VIPER® ATTACK® series comes standard with the innovative patented fog pattern called RYLSTATIC®. RYLSTATIC® is a system that gives you a uniform water fog with smaller water droplets and less friction loss than other traditional systems. VIPER® ATTACK® nozzles are designed to operate with a wider fog shield of protection for the firefighter. Shut Off Valve: The valve has a dual seat and dual driven shaft to offer better performance against water hammer and to enhance its durability. The valve itself is low maintenance with a stainless steel ball valve operated through an OPEN/CLOSE handle The operation is smooth and constant allowing firefighters to open and close the valve easily.Stainless Steel Inlet Screen: A stainless steel screen is mounted within the inlet to prevent materials from entering the nozzle, which reduces the risk of damage or failure during operation.
Ring Markings: Markings on the flow selector ring and the pattern ring are laser engraved onto anodized aluminum that are easy to read and will not fade.Lot Number: Every nozzle is marked with a lot number before leaving the factory. This number can be used for traceability purposes.Inlet Options: The VIPER® ATTACK® selectable flow nozzles are available with the following standard threads:• NST/NH Female• NPSH/IPT Female• BSP FemaleThe swivel inlet allows the nozzle to rotate continuously while connected to the supply hose.Foam: The VIPER® ATTACK® nozzle can be used as an aspirating foam nozzle with the addition of the optional foam tube. The nozzle works well with pre-mixed solutions or with inline eductors.Approvals and Standards: The VIPER® ATTACK® nozzle complies with NFPA 1964 and is manufactured in an ISO9001 accredited facility. EN15182-1 & EN15182-2 type 3 Certificate available by request.
7
ATIFNCAT0319
www.atifireproducts.com 888.229.96559 Vose Farm Road · Peterborough, NH 03458-0090
Premium Quality Selectable Gallonage Nozzle
ATTACK
Service and Maintenance: The VIPER® ATTACK® nozzle requires minimal maintenance during operation provided the unit is regularly flushed with clean water after being used with foam or contaminated water. Service kits are also available.
VIPER® ATTACK® NOZZLE MODEL
LENGTH WEIGHT SWIVEL INLET
(in)
NOZZLE FLOW EFFECTIVE REACH ATTACH. FOAM TUBEin cm lbs kg gpm lpm ft m
VA 550 7.87 20 3.02 1.37 1*
5 25 52 16
CEP VA 1"
15 50 66 20
30 125 79 24
50 175 85 26
VA 1560 7.87 20 3.02 1.37 1*
15 50 66 20
30 100 75 23
45 160 82 25
60 200 89 27
VA 3012 9.37 23.8 4.29 1.95 1 ½
30 115 79 23
CEP VA 1 ½"
60 230 92 27
95 360 115 33
125 465 128 37
*Perfect performance even at 580 psi (40 bar)
The Effective Reach measured in feet is at 100 PSI, while the effective reach measured in meters is at 6 Bar (85 PSI). The RYLSTATIC® System is a low maintenance system.
Patented Rylstatic® Technology The ultimate concept in firefighting nozzles!
ATIFNCAT0319
8 www.atifireproducts.com 888.229.96559 Vose Farm Road · Peterborough, NH 03458-0090
The nozzles that get you to the seat of the fire.
BORE NOZZLE
Viper fire supression from ATI
A VIPER® Bore Nozzle is the perfect combination of a VIPER® Bore Tip and a VIPER® Shut Off.
Service and Maintenance: The VIPER® Bore Nozzles require minimal maintenance during operation provided the unit is regularly flushed with clean water after being used with contaminated water. Service kits are also available.
• Lightweight hard coat anodized aluminum• Concentrated water flow while using lower pressures• Several sizes and orifices available
• Select the nozzle tip size to meet your individual needs• Combine with the Viper Ball Valve With Dual Seat & Dual
Driven Shaft for Superior Firefighting Solutions
VIPER® Bore Tip Flow Markings: Flow markings on the VIPER® Bore Tip are laser engraved onto hardcoat anodized aluminum that are easy to read and will not fade.
Threads: All VIPER® Bore Tip models standard with NH inlet thread.
9
ATIFNCAT0319
www.atifireproducts.com 888.229.96559 Vose Farm Road · Peterborough, NH 03458-0090
The nozzles that get you to the seat of the fire.
BORE NOZZLE
VIPER® Bore Tip Flow Discharge at different pressures:
Bore Size(in)
Water Flow Discharge
at 50 psi (3.4 bar) at 75 psi (5.2 bar) at 80 psi (5.5 bar) at 100 psi (6.9 bar)
gpm lpm gpm lpm gpm lpm gpm lpm3/8 30 114 36 136 37 140 42 1591/2 53 200 64 242 66 250 74 2805/8 82 310 101 382 104 394 116 4393/4 118 447 145 549 149 564 167 6327/8 161 609 197 746 203 768 227 859
15/16 185 700 226 856 234 886 261 9881 210 795 257 973 266 1,007 297 1,124
1 1/16 237 897 290 1,098 300 1,136 335 1,2681 1/8 266 1,007 326 1,234 336 1,272 376 1,4231 1/4 328 1,242 402 1,522 415 1,571 464 1,756
VIPER® Bore Tip Type ReferenceBore Size (Orifice) Length Inlet
inch mm inch cm inch mm
Adapter Bore I218647 15/16" 23.8 2 3/4 7.0 1 ½" 38
Plain Tip
I218674 3/8" 9.5 4 1/3 11.0 1" 25I218675 1/2" 12.7 4 1/3 11.0 1" 25I218646 5/8" 15.9 4 1/3 11.0 1" 25I218677 5/8" 15.9 3 3/4 9.5 1 ½" 38I218676 3/4" 19.1 3 3/4 9.5 1 ½" 38I218649 7/8" 22.2 3 3/4 9.5 1 ½" 38I218678 15/16" 23.8 3 3/4 9.5 1 ½" 38
Smooth Bore Tip
I218673 1 ¹⁄₄" 31.8 5 12.7 1 ½" 38I218668 3/4" 19.1 5 12.7 1 ½" 38I218669 7/8" 22.2 5 12.7 1 ½" 38I218670 15/16" 23.8 5 12.7 1 ½" 38I218671 1" 25.4 5 12.7 1 ½" 38I218672 1¹⁄₁₆" 27.0 5 12.7 1 ½" 38I218644 1¹⁄₈" 28.6 5 12.7 1 ½" 38
Dual Stacked
TipI218691 15/16" & 1/2" 23.8 &
12.7 6 1/2 16.5 1 ½" 38
ATIFNCAT0319
10 www.atifireproducts.com 888.229.96559 Vose Farm Road · Peterborough, NH 03458-0090
VIPER® Shut Off construction: The VIPER® Shut Off has a dual seat and dual driven shaft to offer better performance against water hammer and to enhance its durability. The VIPER® Shut Off is a low maintenance product with a highly engineered polymer resin or stainless steel ball valve operated through an OPEN/CLOSE handle. The operation is smooth and constant allowing firefighters to open and close the valve easily. VIPER® Shut Off Lot Number: Each VIPER® Shut Off is marked with a lot number for ease of tracking.
VIPER® Shut Off Inlet Options: The VIPER® Shut Off are available with the following standard threads: NST/NH Female, NPSH/IPT Female, and BSP Female. VIPER® Shut Off Stainless Steel Inlet Screen: A stainless steel screen is mounted within the inlet to prevent materials from entering the nozzle to reduce the risk of damage or failure during operation. Full-time swivel inlet
The nozzles that get you to the seat of the fire.
BORE NOZZLE
VIPER® Shut Off (with Pistol Grip)
ReferenceBore Size (Orifice)
Waterway Size Thread
Inlet Female –Outlet Male
Weight
inch mm inch inch mm lbs. kgI218220 1" 25.4 1" NH 1" - 1" 25 - 25 2.16 0.98I218251 1" 25.4 1" NH 1 ½" - 1 ½" 38 - 38 2.30 1.04I218222 1" 25.4 1" NPSH 1" - 1" 25 - 25 2.16 0.98I218223 1" 25.4 1" NPSH 1 ½" - 1 ½" 38 - 38 2.30 1.04I230023 1" 25.4 1 ³⁄₈" NH 1 ½" - 1 ½" 38 - 38 3.38 1.53I230024 7/8" 22.2 1 ³⁄₈" NH 1 ½" - 1 ½" 38 - 38 3.38 1.53I230025 15/16" 23.8 1 ³⁄₈" NH 1 ½" - 1 ½" 38 - 38 3.38 1.53
VIPER® Shut Off (with Pistol Grip)
ReferenceBore Size (Orifice)
Waterway Size Thread
Inlet Female –Outlet Male
Weight
inch mm inch inch mm lbs. kg
I230021 1" 25.4 1" NH 1" - 1" 25 - 25 2.16 0.98
I230022 1" 25.4 1" NH 1 ½" - 1 ½" 38 - 38 2.30 1.04
I230035 1" 25.4 1 ³⁄₈" NH 1 ½" - 1 ½" 38 - 38 2.16 0.98
I230036 7/8" 22.2 1 ³⁄₈" NH 1 ½" - 1 ½" 38 - 38 2.30 1.04
I230037 15/16" 23.8 1 ³⁄₈" NH 1 ½" - 1 ½" 38 - 38 3.38 1.53
11
ATIFNCAT0319
www.atifireproducts.com 888.229.96559 Vose Farm Road · Peterborough, NH 03458-0090
NOTES
ATI reserves the right to modify any specification without prior notice to meet or exceed changing standards. Special diameters or construction characteristics can be produced upon special request. Contact your local dealer or ATI at: [email protected]
A Proven History of Nozzle Quality and Durability
Located in Peterborough, New Hampshire, Armored Textiles Fire Products (ATI), has supplied fire hose to municipal and industrial fire departments throughout the U. S. and Canada for over 50 years.
In 2001, ATI purchased the fire hose lines of thirty five year old Jaffrey Fire Protection, which pioneered the use of LDH (large diameter hose) and developed innovative water supply methodologies for fighting fires in
rural environments. ATI’s municipal product line includes nitrile rubber hose in diameters ranging from one to six inches, and double-jacket hose from one to five inches. Armored Textiles Fire Products also distributes our
line of fire nozzles and accessories that provides a complete line of fire suppression products for the North American Firefighter.
ATI municipal fire hose and fittings conform to NFPA standards, and carry a 10-year non pro-rated warranty for materials and workmanship. Our forestry hoses carry a one year materials and workmanship warranty.
ATI FIRE PRODUCTS9 Vose Farm Road | Suite 250 | Peterborough, NH 03458
Tel: 603-924-2122 | Toll-Free 1-888-229-9655 | Fax: 603-924-2322e-mail: [email protected] | web: atifireproducts.com
ATIMFHCAT0219
A Part of the Kuriyama Group of Companies