first atlantic drilling - gasgroupintl.comgasgroupintl.com/wp-content/uploads/profiles/first... ·...
TRANSCRIPT
www.gasgroupintl.com [email protected]
EXECUTIVE SUMMARY
This proposal intends to present
technical competence of FIRST
ATLANTIC
DRILLING AND SUPPORT
SERVICES LTD (FADSS).
This proposal also covers, in detail,
technical features of some of the
components FADSS provides along
its ultra-modern services.
In line with the Federal Government local
content vision to grow a world-class
indigenous company that would render
quality and efficient service to the oil and
gas sector, that this organization was
established.
FIRST ATLANTIC DRILLING AND SUPPORT SERVICES LTD (FADSS) is a subsidiary of the GAS Group. Founded in 2010 as a wholly Nigerian company established to provide advanced solutions to the energy industry in Nigeria, Africa and beyond.
Since inception, we leverage our technical and safety leadership cultivated through project execution in new and emerging
of our customers’ programs.
We are a technically innovative company providing worldwide drilling services, well engineering, well completions, well
downhole operations, rental tools and project management as well as rig design, rig rental, construction and operations management.
In the quest to enhance the capabilities of FADSS, we are into strategic Allianz with the following world renowned organiza- tions;
1. CNOOC, China 2. Starse, China 3. IDE, USA 4. Loadcraft, USA, etc.
Being fully equipped with the requisite industry knowledge, FADSS is fully posi-
tioned to undertake any project within our
area operations and such will be
executed safe, within budget and on time.
Our personnel and equipment are oper-
ating in strategic locations and markets.
Likewise, our rental tools business sup-
plies premium equipment to operators on
land, offshore and swamps. FADSS has been awarded several
contracts for the design, construction,
and operation of customer owned rigs
including the operation of two extended
reach drilling land rigs and an offshore
drilling platforms.
Presently, FADSS tools and equipment
storage facility at the SHELL Kidney
Island is one of the most stocked tools
and equipment storage yard in the entire
West Africa. The Facility also has direct
access to the water ways with a dedicated
jetty to support FADSS operations. A visit
to this facility will in doubt impress your
person.
This proposal also hints of FADSS
commitment to providing quality services
while ensuring the safety of lives and the
protection of the environment.
All inquiries, questions and comments
should be directed to;
Name: GLIFFETH WONUIGWE Address: PLOT 6B, BLOCK 110 OLU-
WAKAYODE JACOBS STREET,
LEKKI PHASE 1, LAGOS, NIGERIA.
Telephone: +234 (01) 763 1533
Mobile Phones: +234 070 333 30673;
+234 080 943 33330
E-mail Address:
gliffeth.wonuigwe@
gasgroupintl.com
Thank you.
Yours Sincerely, For: FIRST ATLANTIC DRILLING AND SUPPORT SERVICES LTD, GLIFFETH WONUIGWE (GAS Group CEO) RAYMOND ABANDA ( EXECUTIVE. DIRECTOR – OPERATIONS)
www.gasgroupintl.com [email protected]
www.gasgroupintl.com
Founded in 2010, We leverage our technical and safety leadership cultivated through project execution in New and emerging global markets to enhance the efficiencies of our customers’ drilling programs. Our personnel and equipment are operating in strategic locations and markets
ABOUT US
FIRST ATLANTIC DRILLING AND SUPPORT SERVICES LTD (FADSS) provides advanced solutions to the energy industry. We are a technically innovative company providing worldwide drilling services, well engineering, well completions, well services, downhole operations, rental tools and project management as well as rig design, rig rental, construction and operations management.
Our rental tools business supplies premium equipment to operators on land and offshore. FADSS has been awarded several contracts for the design, construction, and operation of customer owned rigs including the operation of two extended reach drilling land rigs and an offshore drilling platform.
VISION
To become the leading global provider of premium services
in the industry we operate in while generating consistent
superior returns for our stakeholder
OUR MISSION
Use The Most Advanced Technology Yet Possible – Advanced Technology Unique to Our Industry – Welding Automation – Material Handling Automation – Very High Precision Screen Machines – In-process Slot Measurement System – Wire Mills That Hold Extremely Tight Tolerances
* Reduce Operating Costs – Reduced Scrap – Reduced Manpower Requirements
www.gasgroupintl.com [email protected]
www.gasgroupintl.com
GOALS AND OBJECTIVES
QUALITY GOALS Our goal is to continually improve the safety and efficiency of our services, while striving to increase utilization and production by following the directives of FADSS Quality and Safety Management Systems QUALITY OBJECTIVES The quality objective of FADSS is to be an industry leader delivering innovative drilling services that consistently exceed the requirements, needs and expectations of our Clients.
OUR VALUES
Integrity We maintain high ethical standards and demand integrity in our dealings with competitors, customers, partners and each other. Innovative Spirit We create exceptional value for our customers through our Relentless pursuit of improvement in the performance and efficiency of our drilling solutions. Superior Service to Our Customers We are committed to helping customers become more successful through our superior service and enhanced value. Respect for People and the Environment We work in a manner that protects and promotes the health and well-being of the individual and the environment.
HEALTH, SAFETY & ENVIRONMENT
We are committed to a behaviour-based approach
to health & safety environment
HEALTH, SAFETY AND ENVIRONMENTAL PHILOSOPHY Our goal in safety is to prevent all injuries. Protection of human life is our highest priority and actions undertaken to protect the environment or company assets must reflect this attitude. All our employees are responsible for health, safety and environmental protection compliance. FIRST ATLANTICS DRILLING AND SUPPORT SERVICES LTD believes that accidents are preventable and has made a firm commitment to safety. This dedication has been confirmed in our excellent safety record, reflecting no "lost time" accidents or injuries since inception in 2010.
We recognize the value of health, safety and secure
environment. HSE excellence is one of the foundations of
our relationship with our clients, suppliers, and
subcontractors.
Our goals are to: Do no harm to people or property
Do no damage to the environment
A Passion for the Environment
FIRST ATLANTICS DRILLING AND
SUPPORT SERVICES LTD shall
through its Safety and
Environment policy ensure that
protection of the environment is
given priority where the project is
located and must also conduct all
its activities in a manner by which
the health and safety of its
employees, its sub-contractors
and communities is enhanced.
FADSS will adhere strictly to Regulatory standards of the oil and gas industry, as well as clients HSE guidelines and meet all relevant government requirements. Our work will take cognizance of local flora and fauna and the effects on local communities and work sympathetically to avoid conflicts of interest.
www.gasgroupintl.com [email protected]
QUALITY POLICY
A Passion for the Local
Community
FADSS endeavors to educate local communities affected or adjacent to work areas to give full assurance that ongoing work is being sympathetically undertaken and that local customs and habitats will be enhanced by the work.
FADSS has also developed a programmed which enables an explanation in layman’s terms the nature of work to commence and assurances that any disruptions will be kept minimal.
Details of how all detritus produced as a result of project work will be disposed of in a symphatetic and environmentally safe way
With effective work
procedures and practices in
place, our employees are
committed to quality.
Employees at FADSS are
empowered and held accountable
with identify problems, implement
solutions, and report problems in
order to avoid recurrence.
We are committed to a system of
continual improvement with the
intent to create a competitive
advantage for our customers and
ourselves. We constantly strive to
exceed the needs and
expectations of our internal and
external customers.
We shall maintain an Integrated
Quality and Safety Management
System compliant with accepted
international standards.
We shall place highest value on
integrity, innovative spirit, supe-
rior service to our customers and
respect for people and the
environment.
www.gasgroupintl.com [email protected]
OVERVIEW OF FADSS FACILITIES (PORT HARCOURT)
OUR SERVICES:
Personnel management
Drilling Supervision
Well Stimulation / Optimization
Critical well repairs
Well Completion
Well Intervention and Workover
Cementing
Coiled TBG Services
Fishing / Retrieving Operations
Downhole Tools rental
Asset Management
www.gasgroupintl.com [email protected]
OVERVIEW OF FADSS FACILITIES (LAGOS)
OVERVIEW OF FADSS FACILITIES (LAGOS)
www.gasgroupintl.com [email protected]
WELL COMPLETIONS
FIRST ATLANTIC DRILLING AND SUPPORT SERVICES LTD (FADSS) provides effective well completion services dedicated to ensuring minimal intervention cost, maximum production of the well and ensure longevity of the life of your well.
FIRST ATLANTIC DRILLING AND SUPPORT SERVICES LTD (FADSS)
WELL
COMPLETIONS
WELL COMPLETIONS
www.gasgroupintl.com [email protected]
L
L
I
T
E
V
E
N
T
I
O
N
&
W
O
R
K
O
V
E
R
O
P
E
R
A
T
I
O
N
S
FADSS well
WELL INTERVENTION & WORK OVER OPERATIONS
WIRELINE Primary Well control - Stuffing Box (Slickline) - Grease Head (Braided/Electric line) Secondary Well Control - BOP c/w Dual blind rams - Slickline - BOP c/w inverted dual blind rams - Braided/ Electric line - Grease injection between rams Tertiary Well Control - BOP c/w Shear Ram - In the event tree MV cannot shear wire
TRACTORS History - Deviated or horizontal wells now common place - Slickline relies on gravity for well access - Tractors introduced in 1996 - Provides driving force at the end of the wire via traction wheels - Speed and force dictated by number of drive sections - Mechanical Services introduced in 2003 - Coiled tubing Tractors Unit components - Electrics - Powered from surface through wire - Control for motor & pump - Motor & Pump - Generate hydraulic flow and pressure
- Wheel section - Provides axial force at end of wire - Typically 500lbs per section - Compensator - Caters for oil pressure increase and keeps pump primed Applications - Well access - Mechanical applications introduced in 2003 - Scale milling - Brushing and polishing - Manipulation tools - Debris removal - Logging while Tractoring - Bi-directional open hole tractor
WELL COMPLETIONS
Multilateral Well Completions Multilateral wells combines selective and multiple functions, and also has the particular characteristic of using several holes, which converge into a ‘father’ well.
Intelligent Well Completions (IWC) Intelligent well completions use separating devices inside the well to separate oil from water downhole, and re-inject that same water into the formation during oil production.
Intelligent well completion indicates the direct control of the flow and emission, both on a productive level and on an environmental level.
www.gasgroupintl.com [email protected]
WELL INTERVENTION & WORK OVER OPERATIONS
WELL INTERVENTION & WORK OVER OPERATIONS
COILED TUBING
History
- Pipeline Under The Ocean (PLUTO) - Allied invasion in 1944 - 3" pipelines, 70km long - Supplied fuel to allies in Europe - 1st oilfield application in 1962 - 15,000ft, 1.315in OD - Sand bridge cleanouts
COILED TUBING
TUBING GUIDE ARCH
& INJECTOR HEAD
Function
PRESSURE HYDRAULIC WORKOVER CONTROL (HWO)
EQUIPMENT (PCE) History
Applications
. Vertical, deviated and horizontal wells on both land and
offshore:
- Fluid displacement
- Logging
- Perforating
- Stimulation
- Remedial cementing - Setting, retrieving bridge plugs
- Fishing
- Mechanical removal of blockages (milling)
Coiled tubing string design
- Continuous length of pipe - 1 1/2" – 3 1/2" OD
- Typically 22,000ft long
- Tapered ID design - To withstand combination of forces in hole - Adequate stiffness "lock-up - Plastic deformation consideration - Circulation rates and pressures - Logistic considerations
- To support, straighten and align the tubing
into the injector head
- Provides the surface drive force to run and
retrieve the tubing
Design Consideration - Arch radius should be at least 30 times
tubing OD (API 5C7)
- Must withstand the loading caused by reel
back tension
- Must withstand side loading caused by fleet angle
- 120% of max force expected pull the tub-ing
from the well (API 5C7)
- 120% of max force expected to snub the
tubing into the well against wellhead
pressure (API 5C7)
Function - Stripper provides dynamic
primary seal around the tubing
during tripping and a static seal
around the CT when there is no
movement
- BOP provides secondary well-
bore pressure containment and
facilitates tubing severance, tubing
support and seals around the tubing
Design Consideration - Rated working pressure must
exceed maximum anticipated
surface pressure
tion to suit application - Pipe severance under anticipated
conditions
- Mr R H.C. Otis Snr. Designed and built first unit to
run pipe under pressure in 1929.
- Rig "snubbed" pipe in via series of chains and
pulleys.
- 1st generation HWO unit introduced in the 1960's
- No requirement for rig.
- Typically run pipe in singles.
- Rig assist (RA) units returned in late 1990's to
support UBD activity.
- Hydraulic jacks
www.gasgroupintl.com [email protected]
HYDRAULIC WORKOVER (HWO) Applications - Through tubing intervention – washing, unloading, simulation etc. - Milling inside tubing or casing - Running or pulling production strings - Through tubing drilling (over or under balanced) - Abandonment - Deploying perforating guns under pressure - Blowout recovery operations
HYDRAULIC WORKOVER (HWO) Unit components - Ginpole and Winch - Facilitates a crane boom - Picks up tubing joints to the work basket - Not required for Rig Assist Units - Travelling Slips - Two sets of slips to Cater for pipe heavy and light scenarios - Incoporate rotary head - Work Basket - Accomodates crew and unit controls
HYDRAULIC WORKOVER (HWO) Unit components - Hydraulic jack - Provides the appropriate force to run and pull tubing string - Typically <600klbs - Stationary slips - Holds tubing string when travelling slips are disengaged - Annular BOP - Secondary well control when stripping/ snubbing pipe - Stripper 1 & 2 - Primary well control when snubbing/stripping pipe - Equalising loop for running - upset joints/collars - BOP's - Tertiary well control - Pipe/Blind/Pipe
i n f o @ g a s g r o u p i n t l . c o m
WELL INTERVENTION & WORK OVER OPERATIONS
HYDRAULIC WORKOVER
FIRST ATLANTIC DRILLING AND SUPPORT SERVICES LTD' objective is to cost-effectively, efficiently and safely help optimize drilling operations around the world.
WELL INTERVENTION & WORK OVER OPERATIONS
FISHING & DOWNHOLE OPERATIONS
DEDICATED TO SAFETY AND QUALITY FIRST ATLANTICS DRILLING SUPPORT SERVICES Fishing Services is dedicated to maintaining the highest safety and quality standards. This dedication is reflected in the fact that Fishing Services is ISO compliant and joins other FADSS service lines in achieving one of the best ratings in the industry. Inspection Process brings a new level of efficiency, accountability, and consistency to Fishing Services' tool maintenance program to ensure that every tool that is sent to the customer's well site will perform successfully – as expected. A wide array of advanced fishing tools
FADSS Fishing Services includes but not limited to;
Open-hole fishing services
Cased-hole fishing services
Cutting and milling services
Thru-tubing services
Casing exit systems & whipstock
Foam units
Remote-controlled power swivels
Circulation systems
High-torque wash pipe
Packer services
Fishing jar services
Pipe Recovery services
Maintenance & Tools Dressing services
Fishing Services provides a full line of cased-hole, open-hole and thru-tubing downhole fishing tools that are expertly applied at the well site by knowledgeable fishing tool supervisors that are among the best in this industry. Our Fishing Services' personnel have more than 85 years of advanced land and offshore fishing experience, ensuring customers receive the best tools, equipment and service in the industry.
With a vast inventory, experienced representatives who are specialists, FADSS is ready to help you perform faster, better and smarter. We're more than just a tool rental company – our representatives are available to partner with you from the planning stages, through active drilling to the conclusion of the project to help determine the most efficient application of rental tools on the job. Our strategically located, full-service Fishing Service facilities in Shell Kidney island operate around the clock, seven days a week to service customers both in the Niger Delta and other locations.
ENSURING SAFE OPERATIONS Fishing Services' technically advanced mills, cutters, casing exit systems and other downhole fishing tools are worked to ensure a quality outcome every time. Examples of Fishing services' commitment to new products include the single-trip whipstock, casing exit system and innovative thru tubing indexing tool.
www.gasgroupintl.com [email protected]
FISHING & DOWNHOLE OPERATIONS
OVERSHOT - GRIPPING AND RELEASING MECHANISM
FISHING & DOWNHOLE OPERATIONS
SUCKER ROD OVERSHOTS IMPRESSION BLOCKS
AND EXTENSION SUBS
OVERSHOT ACESSORIES
www.gasgroupintl.com [email protected]
FISHING & DOWNHOLE OPERATIONS
ITCO-TYPE RELEASING SPEARS
FULL-CIRCLE RELEASING SPEARS SUBS
www.gasgroupintl.com [email protected]
FISHING & DOWNHOLE OPERATIONS FISHING & DOWNHOLE OPERATIONS
JUNK BASKET
FISHING MAGNET
JUNK BASKET
www.gasgroupintl.com [email protected]
i n f o @ g a s g r o u p i n t l . c o m w w w . g a s g r o u p i n t l . c o m
FISHING & DOWNHOLE OPERATIONS FISHING & DOWNHOLE OPERATIONS
MAGNETS ROTARY SHOES
CUTTERS
MILLING TOOLS
w w w . g a s g r o u p i n t l . c o m i n f o @ g a s g r o u p i n t l . c o m
www.gasgroupintl.com [email protected]
i n f o @ g a s g r o u p i n t l . c o m
FISHING & DOWNHOLE OPERATIONS
TUBING & CASING PACHES
WINDOW RE-ENTRY SYSTEM
w w w . g a s g r o u p i n t l . c o m
FISHING & DOWNHOLE OPERATIONS
SWIVEL HEAD
Window Re-entry System offers a cost effective
and efficient way to locate and re-enter existing
windows in cased wellbores. The system mechanically locates an existing
window—both the top and bottom—then
installs a properly aligned and secured
whipstock as a re-entry guide. The window
can then be entered or exited with full-gauge
tools.
THE SYSTEM ADVANTAGES Window Re-entry System can locate
up to six windows.
Assembly length of approximately 30 ft. allow for easier snubbing.
Flow control sub allows for well control prior to and immediately following anchor setting.
Whipstock anchors securely in place, allowing milling operations or running of shouldered tools without fear of dislodging the whipstock.
System is easy-to-retrieve with retrieving hook and requires a straight pull to release anchor.
Bowen Casing
Scrape
Washover Pipe
SUMMARY OF FADSS
FISHING AND
DOWNHOLE SERVICES
External catch Tools
Internal Catch Tools
Junk Retrieval Tools
Milling and Cutting tools
Accessory Tools
Repair and Remedial Tools
Washover Pipe
Assembly Washover Pipe
Sups/Shoe
www.gasgroupintl.com [email protected]
DOWNHOLE TOOLS
RENTAL
TOOLS RENTAL
As a disciplinary organization, FADSS also has the capabilities for the supplies of specialized oil and gas rental tools providing high-quality, reliable equipment used for drilling, completions, work over, fishing/downhole services and production applications, such as drillpipe, heavy-weight drill pipe, tubing, high-torque connections, blow out preventers, drill collars and more. With a vast inventory, strategic locations and experienced representatives, FADSS is ready to help you perform faster, better and smarter. We're more than just a tool rental company our representatives are available to partner with you from the planning stages, through active drilling to the conclusion of the project to help determine most efficient application of rental tools on the job.
FADSS tools can support operations in unconventional drilling programs, including deepwater, directional and deep well drilling programs, completions and fishing/downhole services because our premium rental equipment meets or exceeds API and DS-1 specifications, and is subject to a rigorous quality assurance program, including high pressure testing for well control equipment, ensuring optimum performance and safe operations. It is the goal of FADSS to be the best rental tool services provider in the business while working safely and reducing impact on the environment.
FADSS is a full-service provider of complete tubular for drill pipe, bottom hole assembly components and heavy lift rig and handling equipment. FADSS also offers pipe maintenance services and storage. This service covers for both land and offshore operations. Our services are available with our standard to provide the highest quality service while meeting or exceeding all safety requirements. We continue to upgrade our quality process with programssuch as ISO and DNV (Det Norske Veritas) certifications. Our operational base at the SHELL Kidney island has more than enough space with its total land surface area of 30-acres that operates 24/7 to service all our clients and prospective clients as well. ENSURING SAFE OPERATIONS As a recognized organization in safety, FADSS has implemented in-house training programs to prepare employees to safely handle every situation from tool preparation to environmental issues. FADSS maintains the highest level of safety in the industry.
www.gasgroupintl.com [email protected]
COMPLETE
TUBULAR SERVICES
Full Length Ultrasonic Inspection(FLUT) of Drill Pipe
Ultrasonic End Area Inspection
EMI Drill Pipe Inspection
Bottom Hole Assembly (BHA) Inspection
Hoisting & Handling NDE Equipment Inspection
Portable Lathe Refacing – Drill pipe, Hevi-Wate Drill Pipe and Drill Collars
Pipe Maintenance - Water Blasting - OD/ID Brushng - OD/ID Coating
Hardbanding - Portable Units - Staionary Units
Hardness Testing
Full Machine Shop Services
COMPUTER AIDED
APPLICATIONS
PREMIUM TOOLS FADSS utilizes the latest technology available in the computer sciences to provide our clients with necessary support. We are constantly upgrading both our hardware and software applications as technology expands. Our computer systems link our offices in Houston and interface with many of our clients in data exchange. Current applications utilized on our Corporate Computer System include: OPERATING SYSTEMS SERVER Windows 8, 4w/Seagate Back Up Exec Version 7.0 WORKSTATIONS Windows 8 APPLICATIONS Project Scheduling Fast Track Schedule Version 4.0 (AEC Software) Timeline scheduling application designed for project management MS Office Project Version 2016 ENGINEERING Pipeline (Gulf Publishing Co.) Pipeline sizing for gas, liquid and 2 Phase process flow.
Hysim (Hyprotech, LTD) Process Simulation Application for hydrocarbon and other chemical processes. Strucad *3D (Zentech, Inc.) Structural Analysis Application for design of steel and concrete structures including offshore pile, jacket and deck structures. DRAUGHTING AutoCAD release 14, 2000, 2002 & 2004 (Autodesk) Computer Aided Design (CAD) AutoCAD 3rd Party Add On Software Pro-flow Version 12.2 (Rebis) Pro-Pipe Version 12.2 & 13 (Rebis) AutoPLANT Version 97 (Rebis) FlexCAD Release 3.54 (PI Integrated Ssytems) MathCAD MULTIPURPOSE BUSINESS TOOLS Office 2016
www.gasgroupintl.com [email protected]
WELL STIMULATION SERVICES
In addition to our current services, we have brought on board our Stimulation vessels to carry out all Well Stimulation services and for this we are bound by a long term commitment with our partners EMIRATES WESTERN as their sole representative across sub-Saharan Africa. Our Vessels are able to carry out services including:
Drilling
Wireline
Acidizing
Coiled tubing drilling
Production through coiled tubing
Fracturing
Cementing
Stimulation
Nitrogen services
Downhole tools
Well Intervention and workover
Vessel services
Related Chemical services
Oil sludge treatment
www.gasgroupintl.com [email protected]
The world is continuously changing and becoming more complex.
These changes and complexities have significant impact on
society, business and the natural systems in which they operate.
FADSS Asset Management is designed to help and maintain
control over organizational assets, perform financial accounting
related to assets, calculate and maintain lease information, and
provide a central repository for asset information.
With FADSS unique position in the market our investment experts
can draw on many diverse viewpoints. By sharing knowledge and
insights across capabilities, asset classes, industries and
geographies, we are able to make connections between
seemingly unrelated factors, uncovering hidden investment
opportunities for our clients
Apart from the energy sector, FADSS also monitors opportunities
in different sectors, where it has a potential to create value with its
unique know-how and experience.
At the heart of our investment approach, we have an emphasis on
creating sustainable value with CNOOC our financial partner.
INVESTMENT MODEL
www.gasgroupintl.com [email protected]
First Atlantic Drilling & Support Services Ltd has developed a model that will generate high financial, social and environmental returns from cash investments by securing rights through this framework. Most Organisations are coming under increasing pressure to deliver more for less
We journey with organisations to help them understand their role in a changing society and economy.
In FADSS, we operate groups of assets over the whole technical lifecycle guaranteeing a suitable return and ensuring defined service and security standards. Below is our asset management (AM) process.
www.gasgroupintl.com [email protected]
FADSS philosophy is to invest in businesses where the paradigm shift is our main goal in order to
create market-leading companies in their different sectors.
FADSS is also able to monitor the opportunities from different industries, where it has a potential to
create value with its unique know-how and experience.
FADSS seeks to acquire majority shares or minority shares with controlling rights of its target
companies. In addition, we are open for partnerships with strategic co-investors who are able to
contribute our businesses throughout their stages of development.
FADSS unique blend of skills and perspectives enables us to make better-informed decisions so we
can help our clients, both individuals and institutions, to achieve their financial goals.
FADSS aims to invest in companies;
• With sustainable and major growth potential, market leaders or strong candidates having the
potential to create value with our industry experience coupled with access to unique financing
options.
www.gasgroupintl.com [email protected]
CONTACT
LAGOS PLOT 6B, BLOCK 110,
OLUWAKAYODE JACOBS STREET, LEKKI PHASE 1, LAGOS,
NIGERIA.
PORTHACOURT SHELL's KIDNEY ISLAND,
ABONNIMA WATER FRONT MILE 1, PORT HACOURT,
RIVERS STATE, NIGERIA.
TEXAS 3811 N BRIDGE STREET,
BRADY, TX 76825, TEXAS, USA.
www.gasgroupintl.com [email protected]