fister expose itfisterinc.com/pdf/fister_expose_it.pdf · retarder reference guide a better finish...
TRANSCRIPT
Retarder reference guide
A better f in ish starts with Fister, Inc. A better f in ish starts with Fister, Inc.
Call Fister first for all your
Precast Form chemicals
n Microgel - Acid Etching Gel
n Armorgard 505 - Epoxy Form Coating
n K 100 - Epoxy Form Repair Compound
n Q2 - Architectural Form Release
n Form Seal - 1 part Urethane Form Coating
n Fister 20% Acrylic Sealer
Fister also stocks a complete line ofproducts and accessories for your
precast operation including:
n GE Caulks n Corner guardsn Architectural chairs n Panel padsn Standard chairs n Wheel spacers
Call Fister, Inc. at: 1-800-339-9534 or fax your order to: 1-770-587-2321
www.fisterquarries.comThree conveniently located service centers
Alanta, GA • Chicago, IL • Dallas, TX
Expose It, INC.
, INC.
Fister Expose it.qxp 1/19/09 2:11 PM Page 1
Retarder Reference Guide
Special notes for Expose It Form Retarders
1.) Depth of etch is deter-mined by PSI of concrete.
2.) White cement will etchlighter than grey cementwith the same retarder.
3.) .38 - .40 water/cementratio is recommended
4.) Alkine water activated.
5.) While retarder is still wet ,apply a coat in vertical andhorizontal direction.
6.) Expose It form retarder willhold a straight line.
Retarder Reference Guide
Expose Aggregate Expose It Expose It Expose It Surface Retarder Expose It Expose ItRetarders Form Retarder Microgel Surface Retarder Weekend Cast Retarder Paper Release
Description/Advantage
Coverage Rate 300 sq. feet per gal. 200 sq. feet per gal. 125-150 sq. feet per gal. 125-150 sq. feet per gal. Rolls/Square/Rounds 350 sq. feet per gal.
Method of Application Spray, brush or roller Broom/scrub brush low pressure sprayer low pressure sprayer Hand placed Mop or roller
Drying Time 20 minutes N/A N/A N/A Already dry on paper 10 - 15 Minutes
Retarder Color 9 colors available White gel Red & purple Blue 5 colors available Clear
Activation TIme 45 - 60 minute At time of application At time of application At time of application At time of application N/A
Max. Conc. Temp. 150° F N/A 110° F 110° F 110° F 150° F
Base Solvent- V.O.C. Acid Water Water Water IPA
For horizontal andvertical castings,V.O.C. compliantlong placement andvibration time.
Apply to fresh damp‘cured’ concrete.Re-apply if etch isnot deep enough.
Apply to freshly pouredconcrete approx. 30 - 40minutes after concretehas been placed. Coverwith black plastic.
Apply to freshly pouredconcrete. Leave overweekend before washing.Cover with black plastic.
Ideal for steppingstones.
To be used under formretarder only to facilitatetransfer of retarder fromform to panel.
Retarder Color Aggregate Size
Blue Acid etch finish or sandblast aid.
Brown >1/4”
Green 1/8”
Yellow 1/8” - 1/4”
Pink 1/4” - 3/8”
Grey 3/8” - 1/2”
White 1/2” - 5/8”
Orange 5/8” - 3/4”
Violet 3/4” - 1”
Call Fister, Inc. at: 1-800-339-9534 or fax your order to: 1-770-587-2321
www.fisterquarries.com
Three conveniently located service centersAlanta, GA • Chicago, IL • Dallas, TX
Fister Expose it.qxp 1/19/09 2:11 PM Page 3