five knuckle standard weight series - openings studio...• “s” (sherardizing, our additional...

McKINNEY Hinge CatalogFull Mortise Bearing HingesFive Knuckle Standard Weight Series

34 An ASSA ABLOY Group company An ASSA ABLOY Group companyJanuary

200

4

1-800-346-7707www.mckinneyhinge.com

© M

cKIN

NE

YP

rod

ucts

Com

pan

y 20

06

• NRP (non-removable pin)TB (ball bearing)

• TCA (concealed bearing)• RC (round corner - 1⁄4" radius furnished

unless specified otherwise)• HT (hospital tip)• BT (ball tip)• ST (steeple tip)• SSF (safety stud feature)• QC (ElectroLynx hinge) 2, 4, 6, 8, 10

or 12 wire available• CC (concealed circuit) 4, 6 or 8 wire

available*• CS- (concealed switch - handing required)*• MM (magnetic monitoring)• “S” (sherardizing, our additional rust

resistant base under prime coat onsteel base)

• Slip In (Type 1 or Type 2)• Beveled Edge (where doors are beveled

on hinge side specify TA4314 or TA4714)

* Not available in Stainless

All standard weight full mortise non-ferrous hinges are packed with allmachine x 1⁄2 wood screws. Steelhinges (except USP) are packed allmachine x all wood screws. For special screws consult price book on availability.

Recommended for standard weight, medium frequency doors, or doors with closing devices.

Stainless steel base or available in brass or bronze base material polishedand plated or furnished in prime orpowder coat.

Steel base polished and plated or furnished in prime or powder coat finish.

31⁄2 x 31⁄2 88.9 x 88.9 .1234 x 4 101.6 x 101.6 .130

41⁄2 x 4 114.3 x 101.6 .13441⁄2 x 41⁄2 114.3 x 114.3 .134

5 x 41⁄2 127 x 114.3 .1465 x 5 127 x 127 .1466 x 6* 152.4 x 152.4 .160

*Not available in Stainless

Available Sizes

Inches MM Gauge

TA2314 TA2714 Available Options:

A2112 Brass, BronzeA5112 StainlessA8112 Steel

ANSI Cross Reference:

Packing:

APPLICATION

Product Descriptionnmlkji Catalog No: nmlkj

Click Here For Catalog PDF's Hinge • Thresholds and Weatherstrip • Architectural Door Trim

NOTE: We reserve the right, without notice, to make changes in specifications, construction, design, and details at any time in such manner as we may consider necessary or advisable. Corrections to reflect any such changes shall be included in subsequent updates to this website.

Page 1 of 2McKINNEY Hinge | Architectural Hinges by McKinney

10/6/2010http://www.mckinneyhinge.com/products/deco_tips.html

Overview

2

™

™

corbinrusswin.com

Applications

Access 600TM RNE1is ideal for

› Corporate campuses

› Educational facilities

› Healthcare facilities

› Government facilities

Wiegand Open Architecture:

› Cost effective, easy

system expansion

› Integrates mechanical door

hardware with existing

access control system

› The reader is housed within

the exterior escutcheon*

and works with 125 kHz prox

or 13.56 MHz iCLASS®

credentials.

*Patent Pending Escutcheon Design

M802

The M802 125 kHz (proximity) version of Open Architecture Wiegand Access Control Platform offers a high level of security and convenience. The M802 requires a proximity card/fob/tag presentation to gain entry. The 125 kHz reader operates on 12VDC.

M812

The M812 13.56 MHz iCLASS® (proximity) version of Open Architecture Wiegand Access Control Platform offers a high level of security and convenience. The M812 requires an iCLASS® card/fob/tag presentation to gain entry. The 13.56 MHz iCLASS® reader operates on 12VDC or 24VDC.

CyLINDRICAL LOCk - CL33600 x RNE1

EXIT DEvICE - ED5000N x 9600 x RNE1

MORTISE LOCk - ML20600 x RNE1

3

Features

ML20600 RNE1 Mortise Locks

™

™

Features• 12vDC or 24vDC solenoid

operated mortise lock available

as Fail Safe or Fail Secure (voltage

must be specified)

Monitoring Features• Request to exit

• Secure door position monitors latchbolt

and door position in series

Handing• Handed; quick reversibility

• The lockset can be re-handed without

disassembling the lock body

Door Thickness• 1-3/4" (44mm) standard

Optional door thicknesses in 1/8" increments

available; see Quick Code section

Backset• 2-3/4" (70mm)

Lockcase• Heavy-gage chrome plated steel,

5-7/8" (149mm) x 4" (102mm) x

15/16" (24mm)

The Access 600 RNE1 mortise lock integrates into an existing Wiegand-compatible access control system and can monitor Latchbolt

position, Request to Exit, and Door Position status, all within the lockbody. Secure door position monitoring feature ensures latchbolt

is extended when door is closed.

The Grade 1 Access 600 RNE1 mortise lock is designed to meet the rigors of high-traffic commercial, institutional, industrial and

government applications. Constructed of heavy-gage steel, the lockbody features our patented Quick Reversible latchbolt, and a 1"

stainless steel deadbolt.

Front• Heavy-gage steel, 8" (203mm) x

1-1/4"(32mm) x 3/32" (2mm)

Accommodates non-beveled and

beveled doors

Armored Front• Wrought brass, bronze or stainless

steel attached by machine screws

to lockcase front

Latch• Patented, quick, reversible 2-piece

mechanical with anti-friction insert 5/8"

(16mm) x 1" (25mm) x 3/4" (19mm)

U.S. Patent #6,349,982

Auxiliary Latchbolt• 9/16" (14mm) effective throw and

3/8" (10mm) effective auxiliary latch

deadlocking

Deadbolt• One-piece stainless steel, 19/32" (15mm) x 1-1/4"(32mm) x 1" (25mm) throw

• Standard trim is through bolted, not free floating

• Muséo® trim is not through bolted, free floating

Hub• Steel, 5/16" (8mm)

Strike• Wrought brass, bronze or stainless

steel ANSI straight lip standard,

4-7/8" (124mm) x 1-1/4" (32mm)

x 1-1/8" (29mm) lip to center

• Optional strikes, lip lengths and

ANSI wrought strike box available

Cylinder• 1000-138-A01, 6-pin, L4, keyed

random, furnished standard for

1-3/4" (44mm) door

• Optional cylinders available

Warranty• 10-year limited mechanical

• 2-year limited electrical

ANSI• Meets A156.13, Grade 1

requirements

• Meets A117.1 Accessibility Code

• Meets A156.25 requirements

Escutcheons & Electrical Specifications


6

™

™

Escutcheons*

• Solid casting

• Highest point of projection 7/8" (22 mm) less lever

• Operating temperature -40°F (-40°C) to 135°F (57°C)

• LEDs indicate valid/invalid credentials

• Lever x sectional trim only

Reader - M802 (125 kHz proximity credentials)

• Reader requires 12 volts direct current

ML20600 x M802 Electrical Specifications:12VDC System with 12VDC Solenoid Lock

• Reader Draw = 150mA (maximum)

• 12vDC Solenoid Draw = 800mA

Total System Draw = 950mA

12VDC System with 24VDC Solenoid Lock




Reader - M812 (13.56 MHz iCLASS® credentials)

• Reader requires 12 volts or 24 volts direct current

ML20600 x M812 Electrical Specifications:12VDC System




24VDC System




7"(178mm)

2-5/32"

(55mm)

Outside

2-5/32"

(55mm)

7"(178mm)

Highest point of projection 7/8" (22 mm)

less lever

Highest point of projection 7/8" (22 mm)

less lever

Inside

* Patent Pending Escutcheon Design

11

How to Order

ML20600 RNE1 Mortise Locksets

™

™

For all quick codes see pages 35-38

Function

ML20610 x TCRNE1

ML20603 x TCRNE1

ML20660 x TCRNE1

ML20663 x TCRNE1

ML20630 x TCRNE1

ML20605 x TCRNE1

ML20680 x TCRNE1

ML20685 x TCRNE1

Hand

RH

RHR

LH

LHR

Door Thickness

Description Specify

1-3/4" (44mm) std

1-7/8" (48mm) D178

2" (51mm) D200

2-1/8" (54mm) D218

2-1/4" (57mm) D214

Credential

M802 - 125 kHz reader

M812 - 13.56 MHz iCLASS reader

Finish*

Description Specify

Polished Brass, Clear Coated 605

Satin Brass, Clear Coated 606

Polished Bronze, Clear Coated

611

Satin Bronze, Clear Coated 612

Dark Oxidized Satin Bronze, Oil Rubbed

6131

Dark Oxidized Satin Bronze, Clear Coated

613L

Polished Nickel 618

Satin Nickel 619

Polished Chrome 625

Satin Chrome 626

Satin Chrome with MicroShield®

626C

Bright Stainless Steel 6293

Satin Stainless Steel 6303

Satin Stainless Steel with MicroShield®

630C

Black Oxidized Bronze,Oil Rubbed

7222

1 New, March 20072 Formerly 613 prior to March 20073 Escutcheon finished to match 629, 630 finish*See page 8 for finish options available for the Muséo® Piet Lever Collection.

Lock Solenoid Voltage Quick Code

Description Specify

12 Volts DC24 Volts DC

12AD24AD

Consult factory for door thicknesses greater than 2-1/4

29

125 kHz Proximity Readers™

™

Corbin Russwin’s line of proximity readers offers the latest technology and security. These readers can be mounted as

required by the application [ie: in conjunction with electric latch retraction exit devices] on a wall or door frame. All

units can be mounted inside and outdoors with vandal resistance construction.

Wiegand Proximity Readers

Product Number Function Description

752F909HID MiniProx model 5365 • 125 kHz Mullion-mount Prox Reader• Measures 6" high, 1.7" wide and 1" deep• Mounts in junction box (included); 5-16vDC power supply required

752F919

HID ThinLine II model 5395 • 125 kHz Low Profile Prox Reader• Measures 4.7" long, 3" wide and 0.68" deep• Mounts in standard single gang electrical box; 5-16vDC power

supply required

752F929

HID ProxPro II model 5455 • 125 kHz New Generation Prox Reader• Measures 5" long, 5" wide and 1" deep• Mounts in standard single gang electrical box; 5-16vDC power

supply required

752F939

HID ProxPro model 5355 • 125 kHz keypad Prox Reader (keypad is configured for

8-bit data bursts)• Measures 5" long, 5" wide and 1" deep• Mounts in standard single gang electrical box,

field adjustable for mounting directly to metal • 10vDC - 28.5vDC power supply required

752F949

HID MaxiProx model 5375 • 125 kHz Long Range Prox Reader

(up to 24" prox range depending on prox credential used))• Measures 11.8" high, 11.8" wide and 1" deep• Mounts on non-metallic surfaces; 12 or 24vDC

power supply required

752F959

HID ProxPoint Plus model 6005 • 125 kHz Prox Reader• Measures just 3.135" long, 1.72" wide and 0.66" deep• Mounts inconspicuously on metallic surfaces such as mullions;

5-16vDC power supply required

752F979

HID model 5455 AGM00 • Glass-mount kit for use with 752F929 and 752F939• For applications where reader will mount behind glass

Access Credentials

30

™

™

Credential Features• Only compatible with the M802 (125 kHz reader) option• Provides higher level of security when combined with keypad operation• HID-based proximity cards, fobs or tags• Allows integration into existing facilities with HID-based technology• Standard credentials available with 26 bit Wiegand format and Corbin Russwin assigned site code• HID credentials available with 26 bit and 33

bit format and customer assigned site code. For a higher level of security, custom cards, fobs or tags with unique site codes are available; consult factory.

Corbin Russwin HID ProxCard II™• Only compatible with the M802 (125 kHz reader) credential• 26 bit format• Blank (white) card or Corbin Russwin logo card• 25/pkg.• Dimensions: 2-1/8" x 3-3/8" (54mm x 86mm)• Thickness: .070" nom. (1.8mm)

ISO Prox II™• Only compatible with the M802 (125 kHz reader) credential• 26 bit format• Blank (white) card or Corbin Russwin logo card• Blank card can be printed with customer’s text and graphics – by others• 25/pkg.• Dimensions: 2-1/8" x 3-3/8" (54mm x 86mm)• Thickness: .033" nom. (.84mm)

DUO Prox II™• Only compatible with the M802 (125 kHz reader) credential• Multiple Technology Proximity Cards DuoProx – dual technology, proximity and magnetic stripe technology. Enables integration into systems with existing magnetic swipe card readers• Minimum order quantity: 100 each• Custom cards or fobs with unique site codes for higher level of security

MicroProx™ TagThe MicroProx Tag is a coin-sized (disk shaped) transponder that provides the ability to add HID proximity technology to a device. The MicroProx Tag has anadhesive backing which allows it to besecured to any non-metallic object. It is only compatible with the M802 (125 kHz reader) credential.Easily Secured To:• Employee badges• PDAs• Magnetic stripe cardsNote: The MicroProx Tag should be attached to magnetic stripe cards so that contact with the magnetic card reader is avoided.

• Cell phones• 26 bit format with Corbin Russwin site code or customer site code• Sequence numbers marked on each Tag• Gray color with HID Logo• 10/pkg. (100 minimum order quantity)• Dimensions: 1.285" x 0.070" (32.6mm x 1.78mm)• For MicroProx Tag with customer site code,

consult factory for minimum quantities

794F349 C/R 26 bit ProxCard II blank

794F339 C/R 26 bit ProxCard II with logo

794F379 HID 26 bit ProxCard II with logo

794F389 HID 26 bit ProxCard II without logo

794F329 C/R 26 bit ISO ProxCard II blank

794F319 C/R 26 bit ISO ProxCard II with logo

794F359 HID 26 bit ISO ProxCard II with logo

794F369 HID 26 bit ISO ProxCard II without logo

794F399 C/R DuoProx II - prox and magstripe with logo

794F409 C/R DuoProx II - prox and magstripe w/o logo

794F419 HID 26 bit DuoProx II - prox and magstripe

794F429 C/R MicroProx tag

794F449 HID MicroProx tag with customer site code

The access credentials below are only compatible with the M802 (125 kHz reader) option.

31

iCLASS® Smart Card Readers™

™

iCLASS® smart cards and readers make access control more powerful, more versatile, and most important of all,

offer enhanced security through encryption and mutual authentication. At the same time, iCLASS is user-friendly,

delivering the convenience, affordability and reliability of proximity technology.

All Readers configured as follows:

• Wiegand output

• Standard iCLASS security (field configurable)

• Keypad: Buffer one key, no parity, 4 bit message (6130 ONLY)

iCLASS® Smart Card Readers

Product Number Function Description

744F709HID R10 Reader 6100• Mullion-mount Smart Card Reader• Measures 4" long, 1.9" wide and .90" deep• Mounts in single gang electrical box; 12VDC power supply required

744F719

HID R40 Reader 6120• Wall Switch Smart Card Reader• Measures 4.8" long, 3.3" wide and 1.0" deep• Mounts in single gang electrical box; 12VDC power supply required

744F729

HID RK40 Keypad Reader 6130• Wall Switch Keypad Smart Card Reader• Measures 4.8" long, 3.3" wide and 1.1" deep• Mounts in single gang electrical box; 12VDC power supply required

744F739

HID R90 Long Range Reader 6150• Wall Mount Smart Card Reader – Read Only• Measures 12" long, 12" wide and 1.25" deep• Mounts in single gang electrical box; 12VDC power supply required

Accessories

32

™

™

Weatherseal Gasketing

• Gaskets provide sealing between escutcheons and

door for exterior applications

• Gasketing and conduit recommended for use on

non-fire rated exterior applications only

• To order separately, specify gasket part number(s) on

page 35.

Corbin Russwin Proxkey II™• Only compatible with the M802 (125 kHz reader) credential

• 26-bit format• Site code controlled by Corbin Russwin• 10/pkg. (100 minimum order quantity)• Dimensions: 1-29/32" x 29/32" x 11/32" (48mm x 23mm x 9mm)

HID Proxkey II™• Only compatible with the M802 (125 kHz reader) credential• 26-bit format• Customer requested site code or range of fob numbers• 10/pkg.• Dimensions: 1-29/32" x 29/32" x 11/32" (48mm x 23mm x 9mm)• To order specify 794F479

794F469 C/R 26 bit ProxKey II

794F479 HID 26 bit ProxKey II

Requirements for Electrical and Data TransferTo answer the demand for "smart" electronic access control and locking solutions that require fast, easy, and cost-effective installation, ASSA ABLOY Group brands use the ElectroLynx standardized plug-in connectors and color-coded wiring system.

With ElectroLynx, doorway components come pre-wired for easy hookup to the power source. Key to the system is the transfer device hinge that carries power from the frame to the locking hardware.

Features of ElectroLynx:• Makes it easy to bring power to the locking hardware• Wires have connectors that snap together, like plugging a telephone into a jack

To connect Access 600™ RNE1 Series hardware to the electronic access control system, the following items are required:• Access 600™ RNE1 mortise or cylindrical lock, or exit device• ASSA ABLOY Door Group pre-wired door, or ElectroLynx retrofit cable (order from McKinney)• Electronic transfer device (ElectroLynx electronic transfer hinge or Electrical Power Transfer with standard hinge, from McKinney)• ElectroLynx cable from the hinge to above the ceiling (order from McKinney)

Information regarding cable selection, hinge requirements and order strings can be found in the McKinney Transfer Device Solutions catalog. Consult 800-810-WIRE (9473) with questions on application specifications and requirements.

McKinney QC12 ElectroLynx Hinges (or McKinney EL-EPT) are recommended for Access 600™ RNE1 Applications

33

Accessories™

™

WT1 Wiegand Test Unit Designed for use with the Corbin Russwin Access

600™ RNE1 Wiegand lock, the ASSA ABLOy Wiegand

Test Unit is a user-friendly tool providing product

demonstration to highlight important features and

access control capabilities.

Ideal for troubleshooting, the WT1 checks for:• Proper wiring

• Card reader data integrity

• Lock functionality including lock/unlock,

door position and REX

Features:• 12 or 24vDC solenoid lock voltage selectable

• Test in Fail Safe or Fail Secure locks

• “Learn” mode allows testing of specific cards

without programming at the panel level

• Card reader data integrity is validated at test unit

To order, specify WT1

WT1 Wiegand Tester

Accessories, Parts and Quick Code Index

36

™

™

Cylinder Options

Part No./ Quick Code Description Cylindrical Mortise Exit Device

6P Conventional 6-pin std std •

7P Conventional 7-pin • • •

LC Less Cylinder(s) • • std

HS Security • • •

CHS Security IC • • •

PS Pyramid Security • • •

PCS Pyramid Security IC • • •

PHS Pyramid High Security Fixed Core • • •

PCHS Pyramid High Security IC • • •

CTP Pyramid IC with Temporary Construction Core • • •

CLP Pyramid IC Less Core • • •

C6 IC 6-pin • • •

CT6R IC 6-pin with Temporary Construction Core (Red) • • •

CT6B IC 6-pin with Temporary Construction Core (Blue) • • •

CT6G IC 6-pin with Temporary Construction Core (Green) • • •

CL6 IC 6-pin Less Core • • •

CLS6 SFIC 6-pin with Less Core • •

CT6SD SFIC 6-pin with SFIC disposable temporary core • •

CTSD SFIC 6- or 7-pin Small Format Disposable Core1 •

C7 IC 7-pin • • •

CT7R IC 7-pin with Temporary Construction Core (Red) • • •

CT7B IC 7-pin with Temporary Construction Core (Blue) • • •

CT7G IC 7-pin with Temporary Construction Core (Green) • • •

CL7 IC 7-pin Less Core • • •

CLS7 SFIC 7-pin with Less Core • •

CT7SD SFIC 7-pin with SFIC disposable temporary core • •

CTPD Pyramid Disposable Core • • •

CT6D 6-pin with Disposable Core • • •

CT7D 7-pin with Disposable Core • • •

0-bitted with 2 Blank Keys std std std

KR Keyed random • • •

CMK Construction master keyed • • •

VKC0 Visual Key Control (VKC) - No bitting or keyset stamping on keys • • •

VKC1 Visual Key Control (VKC) - Keys only • • •

VKC2 Visual Key Control (VKC) - Cylinders and Keys (not for HS, CHS, PHS, or PCHS) • • •

VKC3 Visual Key Control (VKC) - Cylinders only (not for HS, CHS, PHS, or PCHS) • •

CKC2 Concealed Key Control (CKC) - Cylinders with VKC keys • • •

CKC3 Concealed Key Control (CKC) - Cylinders Only (not for PHS, PCHS) • • •

2 keys per Lock std std std

KY# (e.g. KY6) More than 2 keys • • •

• = availableNote: 1. Specify M08 for levers to accept SFIC cores; which ship standard with temporary disposable core

37

Accessories, Parts and Quick Code Index™

™

Miscellaneous Options

Part No./ Quick Code Description Cylindrical Mortise Exit Device

M04 Torx® head screws • • •

M06 Less cylinder, with tailpiece for Schlage® cylinder •

M08 Lever to accept Best® type core (NZD & PZD designs only) •

M09 Lever to accept Sargent® cylinder (NZD & PZD designs only) •

M13 Rounded Corners on latch front •

M16 3/4" (19mm) throw fire latch •

M17 ANSI wrought strike box • • •

M20 Knurling outside and inside • • •

M21 Knurling outside only • • •

M22 Knurling inside only • • •

M23 Abrasive coat outside and inside • • •

M24 Abrasive coat outside only • • •

M25 Abrasive coat inside only • • •

M69 Lever to accept Schlage® Interchangeable core (NZD & PZD design only) •

M54 Sex nuts and bolts (SNBs) •

M64 Wood screws for use on fire-rated solid wood or wood core doors •

M109 High Impact End Clamp •

M110 Flush End Cap •

Electrified Accessories

BPS-24-1 Power supply 1.0 amp @ 24 VDC output

BPS-24-2 Power supply 2 amp @ 24 VDC output




EPTL Concealed transfer for over 120° swing doors

Accessories, Parts and Quick Code Index

38

™

™

Strikes - ANSI Curved Lip

Specify Lip to Center Cylindrical Mortise Exit Device

SA100 1" (25mm) •

SA118 1-1/8" (29mm) •

SA114 1-1/4" (32mm) • •

SA138 1-3/8" (35mm) • •

SA112 1-1/2" (38mm) • •

SA134 1-3/4" (44mm) • •

SA200 2" (51mm) • •

SA214 2-1/4" (57mm) • •

SA212 2-1/2" (64mm) • •

SA234 2-3/4" (70mm) • •

SA300 3" (76mm) • •

Open Back Strike

Specify Door Thickness Cylindrical Mortise Exit Device

SB134 1-3/4" (44mm) • •

SB200 2" (51mm) •

SB214 2-1/4" (57mm) • •

SR118 Rabbeted front and strike •

Door Thickness - Mortise

Specify Door Thickness

D138 1-3/8" (35mm)

D134 1-3/4" (44mm)

D178 1-7/8" (48mm)

D200 2" (51mm)

D218 2-1/8" (54mm)

D214 2-1/4" (57mm)

Backset

Specify Description Cylindrical Mortise Exit Device

standard 2-3/4" (70mm) •

B334 3-3/4" (95mm) •

B500 5" (127mm) •

Door Width

Specify Description Cylindrical Mortise Exit Device

W024 24" (610mm) •

standard 36" (914mm) std

W048 48" (1219mm) •

Strikes - ANSI Straight Lip

Specify Lip to Center Cylindrical Mortise Exit Device

SS078 7/8" (22mm) •

(standard) 1-1/8" (29mm) std

SS114 1-1/4" (32mm) •

SS138 1-3/8" (35mm) •

SS112 1-1/2" (38mm) •

SS134 1-3/4" (44mm) •

SS200 2" (51mm) •

SS214 2-1/4" (57mm) •

SS212 2-1/2" (64mm) •

SS234 2-3/4" (70mm) •

SS300 3" (76mm) •

Door Thickness - Cylindrical


std1-3/4" (44mm) to2" (51mm)

D2142-1/8" (54mm) to2-1/4" (57mm)

Door Thickness - Exit


std 1-3/4" (44mm)

D200 2" (51mm)

D214 2-1/4" (57mm)

Functions


4

™

™

Outside Inside Series/Function Type Function Description

ML20610 x TCRNE1Fail SafeNo key OverrideNo Deadbolt

Entry

• Fail Safe - Power off unlocks outside trim • Deadlocking latch• Latch retracted by inside lever at all times• Outside lever rigid except when valid user credential presented• Request to exit and secure door position monitor are standard

ML20603 x TCRNE1Fail SafeWith key OverrideNo Deadbolt

Entry

• Fail Safe - Power off unlocks outside trim• Deadlocking latch• Latch retracted by inside lever at all times• Outside lever rigid except when valid user credential presented• key outside retracts latch• Request to exit and secure door position monitor are standard

ML20660 x TCRNE1Fail SafeNo key OverrideWith Deadbolt

EntryWith Deadbolt

• Fail Safe - Power off unlocks outside trim• Deadlocking latch• Latch and deadbolt retracted by inside lever at all times• Outside lever rigid except when valid user credential presented • Turnpiece inside extends and retracts deadbolt• Request to exit and secure door position monitor are standard

ML20663 x TCRNE1Fail SafeWith key OverrideWith Deadbolt

EntryWith Deadbolt

• Fail Safe - Power off unlocks outside trim • Deadlocking latch• Latch and deadbolt retracted by inside lever and Deadbolt at all times • Outside lever rigid except when valid user credential presented• key outside projects or retracts deadbolt and retracts latch• Turnpiece inside extends and retracts deadbolt• Request to exit and secure door position monitor are standard

5

Functions


™

™

Outside Inside Series/Function Type Function Description

ML20630 x TCRNE1Fail SecureNo key OverrideNo Deadbolt

Entry

• Fail Secure - Power off, trim outside is locked• Deadlocking latch• Latch retracted by inside lever at all times• Outside lever rigid except when valid user credential presented• Request to exit and secure door position monitor are standard

ML20605 x TCRNE1Fail SecureWith key OverrideNo Deadbolt

Entry

• Fail Secure - Power off, trim outside is locked• Deadlocking latch• Latch retracted by inside lever at all times• Outside lever rigid except when valid user credential presented• key outside retracts latch• Request to exit and secure door position monitor are standard

ML20680 x TCRNE1Fail SecureNo key OverrideWith Deadbolt

EntryWith Deadbolt

• Fail Secure - Power off, trim outside is locked• Deadlocking latch• Latch and deadbolt retracted by inside lever at all times• Outside lever rigid except when valid user credential presented • Turnpiece inside extends and retracts deadbolt• Request to exit and secure door position monitor are standard

ML20685 x TCRNE1Fail SecureWith key OverrideWith Deadbolt

EntryWith Deadbolt

• Fail Secure - Power off, trim outside is locked• Deadlocking latch• Latch and deadbolt retracted by inside lever and Deadbolt at all times • Outside lever rigid except when valid user credential presented• key outside projects or retracts deadbolt and retracts latch• Turnpiece inside extends and retracts deadbolt• Request to exit and secure door position monitor are standard

7

Available Trim Options


™

™

VineyardTM G Rose

Frascati FSG

Merlot MSG

Tuscany TSG

Zinfandel ZSG

Standard

Lever A Rose B Rose F RoseArmstrong ASA ASB ASF

Newport NSA NSB NSF

Princeton PSA PSB PSF

Citation CSA CSB CSF

Dirke DSA DSB DSF

Essex ESA ESB ESF

Lustra LSA LSB LSF

Regis RSA RSB RSF

Armstrong Citation Dirke Essex*

Newport* Princeton* RegisLustra*

Frascati Merlot Tuscany Zinfandel

*Complies with codes requiring lever to return to within 1/2" (13mm) of door face.

105 106 107 108

110 123*109*

102101 104103

124* 125*

111

114

130*

112

115

131*

116

113

132*

118117 126*

119 120 121 122

127*

25M

21S

23M

21W

Muséo® V Rose U Rose T Rose Y Rose X Rose W Rose

Georgia 101 101V 101U 101T 101Y 101X 101W102 102V 102U 102T 102Y 102X 102W

103 103V 103U 103T 103Y 103X 103W

104 104V 104U 104T 104Y 104X 104W

124 124V 124U 124T 124Y 124X 124W

125 125V 125U 125T 125Y 125X 125W

salvador 105 105V 105U 105T 105Y 105X 105W106 106V 106U 106T 106Y 106X 106W

107 107V 107U 107T 107Y 107X 107W

108 108V 108U 108T 108Y 108X 108W

109 109V 109U 109T 109Y 109X 109W

110 110V 110U 110T 110Y 110X 110W

123 123V 123U 123T 123Y 123X 123W

marc 111 111V 111U 111T 111Y 111X 111W112 112V 112U 112T 112Y 112X 112W

113 113V 113U 113T 113Y 113X 113W

114 114V 114U 114T 114Y 114X 114W

115 115V 115U 115T 115Y 115X 115W

116 116V 116U 116T 116Y 116X 116W

130 130V 130U 130T 130Y 130X 130W

131 131V 131U 131T 131Y 131X 131W

132 132V 132U 132T 132Y 132X 132W

pablo 117 117V 117U 117T 117Y 117X 117W118 118V 118U 118T 118Y 118X 118W

126 126V 126U 126T 126Y 126X 126W

jackson 119 119V 119U 119T 119Y 119X 119W120 120V 120U 120T 120Y 120X 120W

121 121V 121U 121T 121Y 121X 121W

122 122V 122U 122T 122Y 122X 122W

127 127V 127U 127T 127Y 127X 127W

PIET 21L 21LV 21LU 21LT 21LY 21LX 21LW21M 21MV 21MU 21MT 21MY 21MX 21MW

21S 21SV 21SU 21ST 21SY 21SX 21SW

21W 21WV 21WU 21WT 21WY 21WX 21WW

23M 23MV 23MU 23MT 23MY 23MX 23MW

25M 25MV 25MU 25MT 25MY 25MX 25MW

21M21L

Available Trim Options


8

™

™

Muséo® Piet Lever Collection Trim and Finish Options

Leather Insert Santoprene™ Insert Wood Insert Plain 21L 21S 21W 25M

Trim Lever Finish Options

Lever Style Shank Finish* Specify Insert Finish Specify Grip Finish** Specify

21L 629 or 630 29 or 30 Black or Brown BK or BN 629 or 630 29 or 30

21S 629 or 630 29 or 30 Black BK 629 or 630 29 or 30

21W 629 or 630 29 or 30 Birch BH 629 or 630 29 or 30

25M 629 or 630 29 or 30 N/A 00 629 or 630 29 or 30

Polished with Satin With Raised Band Insert 23M 21M

Trim Lever Finish Options

Lever StyleShank Finish*

SpecifyInsert Finish

Specify Grip Finish Specify

21M 629 29 630 30 629 29

23M 629 29 N/A 00 630 30

* Rose and escutcheon finish is designated by shank finish selected** Grip finish must match shank finish

OVERVIEW

2800ST Series Cam ActionDoor Closer

2800ST - 3www.nortondoorcontrols.com6/09

• Suitable for exterior and interior doors• Recommended maximum interior door width 54" (137cm)• Recommended maximum door weight 250 lbs.• Standard opening range:

- Push Side = 110°- Pull Side = 110°

Note: Door openings greater than 110° can be achieved when an auxiliary door stop (by others) is used.Consult factory for details and templates.

• 10-year warranty (refer to current Norton® price book for terms & conditions)• Meets requirements for Americans with Disabilities Act (ADA)• UL and UL10C listed• ANSI/BHMA A156.4 certified

Features• Smooth operation; efficient, powerful, heavy-duty• Easier to open than rack-and-pinion door closers with track arms• Slide track application with regular arm operating efficiency• Slide track standard• Adjustable spring size 1 through 6• Adjustable closing force• Adjustable closing and latching speed• Backcheck standard• Non-handed• Push or pull side installation• Cast aluminum body

Optional Feature• Hold open

DOOR SIZES

CERTIFICATIONS

STANDARDAPPLICATIONS

2800ST Series Cam Action Door Closer

2800ST - 4www.nortondoorcontrols.com 6/09

2800STHINGE (PULL) SIDE OF DOOR• Maximum interior door width 54" (137cm).• An auxiliary stop (by others) is suggested where severe conditions exist.• 110° swing (trim permitting)

Note: Door openings to 160° can be achieved if an auxiliary door stop (by others) isinstalled to dead stop the door. Consult factory for details.

NOTE: Contact factory for use on doors exceeding 250 lbs.

NOTE: Contact factory for use on doors exceeding 250 lbs.

2"

1-1/2"

2-5/8"

2-5/8"

3"

2-5/8"

2-5/8"

1-1/2"

5-1/2"

PS2800STSTOP (PUSH) SIDE OF DOOR

• Minimum frame reveal is 1-1/2" (13mm).• An auxiliary door stop is suggested when severe conditions exist. • 110° swing (trim permitting)

Note: Door openings up to 120° can be achieved if an auxiliary door stop (by others)is installed to dead stop the door. Consult factory for details.

HOW TO ORDER



Product Series

FINISHESProduct will be sprayed with a combination of waterborneacrylic and polyester powder coat.

*600 is a special rust-inhibiting prime coat. Closers can be ordered prime coat only(specify closer x 600). An additional charge applies if finish coat is required over primecoat (ex: 2800ST x 600 x 689).

2800ST

H - Hold Open

FINISHxSUFFIXx

Description Specify Designation(BHMA)Complements thefollowing finishes

OldDesignation

Aluminum 689 628, 625, 629, 630, 651, 652 AL

Statuary Bronze 690 640, 613 STAT

Dull Bronze 691 612, 637, 639 DB

Black 693 315 315

Medium Amber 694 312 312

Gold 696 605, 606, 632, 633 GB

Prime Coat 600* SRI

No Prefix - Pull side installation

PS - Push side installation

Prefix

PARTS LIST

2800ST Series Cam Action Door Closer

2800ST - 6www.nortondoorcontrols.com 6/09

Track AssembliesArm Assembly

Description Pull Side Push Side

Non-Hold Open 7701ST-1T 7701ST-5T2800ST-1A

Hold Open 7701ST-3T 7701ST-8T

Screw Packs

SP2800B Closer Mounting Package

SP2800T Track Mounting Package

SP2800S Spline Kit Package

Closer Body Only

2800LAP(includes closer body screws only)

Spring Plate1

Buffer Spring1

(2 Required)Roll Pin1

(2 Required)

End Cap1

7700STEC(2 Required)

Stationary BlockAssembly1

CushionBlock1

RollerAssembly*1

SlideAssembly7700SLD

Slide Track Assembly(See Chart)

* Hold Open Tracks Only1 Part of Slide Track Assembly

Arm StudClip

7700ASC

Cover Package

2800P

PARTS LIST



General SpecificationsDoor Controls____ (interior) (exterior) swinging door(s) shall be cam and roller design contained within aprecision cast aluminum housing. Door closing force shall be adjustable to ensure adequate closing control.Door closing speed shall be controlled by independent hydraulic adjustment valves in the sweep and latchrange of the closing cycle. Door closer shall have an adjustable hydraulic backcheck valve to cushion the doorspeed if door is opened violently. Maximum door open shall be templated to (85°), (90°), (100°), (110°),conditions permitting. Door closer shall have hold open capability with an on/off selector and tensionadjustment. Non-hold open units shall be U.L. Listed for self-closing door. Unit shall be in compliance with therequirements of the Americans With Disabilities Act (ADA). ANSI standards A117.1. Units shall meet C-UL US.

ARCHITECTURALSPECIFICATIONS

Narrow Top Rail - #2888 Drop Plate: For use where thenarrow top rail of the door prevents the closer from beingmounted directly to the door surface. This drop plate mustbe used for closer mounted on a top rail between 1-7/8"and 3-3/8" (48mm and 86mm) in height.

Retrofit Plate – RP28-4040 allows the 2800ST cam closerto replace the 4040 regular arm or parallel arm closerswithout modifying the existing hole patterns in the door.

NFPA 80 STANDARDS — 2-4.5 Protection Plates: Factory-installed protection plates shallbe installed in accordance with the listing of the door. Field-installed protection plates shallbe labeled and installed in accordance with their listing.

Exception: Labeling is not required where the top of the protection plate is not more than16 in. (406 mm) above the bottom of the door.

C1Rockwood Manufacturing CompanyPhone: 800-458-2424

©6/08

Material: .038" Thick Aluminum, Stainless Steel

Finishes: Brass Look Aluminum (BRS LK), US32D, US32DPAT, and US3LIFETIME

Fastener: #6 x 5⁄8 TH SMS

Ordering: Specify height x width x finish code. Add any options.

Weight: 8" x 34" = 3.2 lbs.

Options: • SA - self-adhesive mounting.• TEK - self-drilling screws.• Cutouts for locks, louvers, or windows.• TORX - security torx screws.

Armor PlateKick PlateMop Plate Stretcher Plate

Metal Door Plate - Economy DutyNo. K1038

Material: .050" Thick Aluminum, Brass, Bronze, Stainless Steel

Finishes: Available in standard architectural finishes, US32DBIO, US32D316, and US32316 (see page 7).

Fastener: #6 x 5⁄8 TH SMS

Ordering: Specify height x width x finish code. Add any options.

Weight: 8" x 34" = 4.0 lbs.

ANSI: J101 - metal armor plate, J102 - metal kick plate, J103 - metal stretcher & mop plate.

Options: • SA - self-adhesive mounting.• TEK - self-drilling screws.• Beveled 3 or 4 edges, specify B3E or B4E.• CSK - countersunk holes.• Cutouts for locks, louvers, or windows.• TORX - security torx screws.• Screw mounting (K1050F) and UL listed for use on 90-minute label wood doors and 3-hour

label metal doors.

Metal Door Plate - Standard DutyNo. K1050, K1050F

Door Plates

Up to 48"h x 48"w andavailable in most finishes

Up to 8"h x 48"w 6" to 12"h x 48"w 6" to 12"h and up to 48"w

Width of Plates:Push Side: 2" less than door width. Pull Side: 11⁄2" less than door width.

Self-Drilling TEK ScrewsCuts Door PlateInstallation Time in Half

US32DPATPatterned Stainless Steel

D4Copyright © 2012, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction

in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited.

800-458-2424 www.rockwoodmfg.com

do

me

sto

ps

Cast Universal Dome Stop No. 441H

Material: Solid cast brass with DuraFlex bumper.

Finishes: Available in standard architectural finishes (see page 9).

Features: Low lip dome stop with height of high dome stop, eliminates the need to determine requirement for traditional low or high dome stop – one stop for all applications. Integral cast pin for added strength. Universal screw pack included for all floor conditions.

Options: Exterior pack screw packs, stainless steel plated to match — use EXP suffix (441H x EXP) when ordering.

Low Dome Stops No. 440, 441



Other: No. 441 is packed with both WS and MS fasteners.

Features: For doors without thresholds (not undercut).

Options: Exterior pack screw packs, stainless steel plated to match — use EXP suffix (440 x EXP) when ordering.

Dome Stop Combination Unit No. 441CU



Other: Set consists of 1 each No. 441 and 1 each No. 444. For use at doors with or without a threshold.

Features: Convertible for undercut or not undercut doors.

Options: Exterior pack screw packs, stainless steel plated to match — use EXP suffix (441CU x EXP) when ordering.

No. Fastener Base Height Weight ANSI A156.16

440 #12 x 11⁄4" FH WS, plastic anchor 1⁄4" h x 17⁄8" dia. 11⁄8" 2.1 lbs./10 L02141

441 #12 x 11⁄2" FH WS, plastic anchor; #12 - 24 x 1" FH MS, lead anchor

1⁄4" h x 17⁄8" dia. 11⁄8" 2.5 lbs./10 L02141


441CU #12 x 11⁄2" FH WS, plastic anchor; #12 - 24 x 11⁄2" FH MS, lead anchor

Dome stop: 1⁄4" h x 17⁄8" dia. Riser: 3⁄8" h x 2" dia.

11⁄8" or 11⁄2" 3 lbs./10 L02141/ L02161

444 Cast riser only 3⁄8" h x 17⁄8" dia. 3⁄8" 10 ozs./10 L02141


441H #12 x 11⁄4" FH WS, plastic anchor 7⁄32" h x 17⁄8" dia. 111⁄16" 3.2 lbs./10 L02141

#12 - 24 x 1" FH MS, lead anchor L02161

E9Rockwood Manufacturing CompanyPhone: 800-458-2424R

Revised 4/09

Door Guards & Silencers

Door Guard Protection PlatesNo. 605, 605SMS

Material: Brass

Finishes: US3, US4, US5, US10, US10B, US26, US26D

Features: Protects corner of door from damage by door guard arm.

No. Fastener Size Weight605 self-adhesive tape 11⁄8" x 1" x 1⁄2" return 0.3 lbs./10605SMS #6 x 5⁄8 FHSMS 11⁄8" x 1" x 1⁄2" return 0.3 lbs./10

Door SilencersNo. 608, 609

Material: DuraFlex Gray Rubber

Other: Sold in packages of 100.

ANSI No. Size Frame Type Weight A156.16608 1⁄2" dia. x 5⁄8" metal 1.3 lbs./500 L03011609 3⁄8" x 3⁄4" wood 1.3 lbs./500 L03021

Door SilencerNo. 608CA

Material: Clear Rubber

Other: Sold in packages of 300.

Features: Self-adhesive mounting.

No. Fastener Size Weight608CA 3⁄8" dia. x 1⁄8" metal or wood 0.2 lbs./300

608

609

Wall GuardNo. 606

Material: Clear Rubber

Other: Sold in sheets of 55.

Features: Self-adhesive mounting.

No. Fastener Size Weight606 self-adhesive back 1" x 1" 0.4 lbs./55

karencusterHighlight

karencusterHighlight

www.mckinneyhinge.com

How ElectroLynx® HelpsTo answer the demand for “smart” electronic access control and locking solutions that require fast, easy, and cost-effective installation, ASSA ABLOY Group brands use the ElectroLynx standardized plug-in connectors and color-coded wiring system. With ElectroLynx, doorway components come pre-wired for easy hookup to the power source. Key to the system is the transfer device hinge that carries power from the frame to the locking hardware.

Overview:

• Makes it easy to bring power to the locking hardware

• Wires have connectors that snap together, like plugging a telephone into a jack

• Developed by ASSA ABLOY and rapidly becoming the industry standard

Key Benefits of ElectroLynx Include:

• Fast, fool-proof, and future-proof installations

• Easy upgrades and retrofitting while maintaining fire rating

• Snap-together Molex® connectors ensure proper connections

• No need to match up wires, create connections or drill holes in the door or frame

• Concealed wiring preserves aesthetics of the opening

McKINNEY QC hinge transfers power from the power supply to the exit device

electromechenical exit device with ElectroLynx

3" cable, minimum, needed between electromechanical exit and QC hinge

Contents

About ElectroLynx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Transfer Device Decision Tree . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Hinge Wiring Requirement CORBIN RUSSWIN. . . . . . . . . . . . . . . . . . . . . . . . . . . 7 YALE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 SARGENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

ElectroLynx Cables Special . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

McKINNEY Hinges, Concealed Circuit QC Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PoE Hinge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Aluminum Continuous . . . . . . . . . . . . . . . . . . . . . . . . . 8 Stainless & Steel Continuous. . . . . . . . . . . . . . . . . . . . 8

Door Cord and EPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Service Kit and Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Standard Pinout Colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Transfer Device Solutions

As part of their promise to provide innovative, fast and effective high security solutions to their customers, ASSA ABLOY Group companies offer ElectroLynx®, a universal quick-connect system that simplifies the electrification of the door opening.

ElectroLynx® is a registered trademark of ASSA ABLOY Inc.

1-800-810-WIRE (9473)



1-800-810-WIRE (9473) 3

McKINNEY hinges and RIXSON pivots can have ElectroLynx® connectors to transfer power from the incoming source through to the electrified hardware. The only hardwiring is from the building’s wiring system to the opening.

All ElectroLynx retrofit cables are 12 conductor, supplied with an 8-pin connector and a 4-pin connector. If you are utilizing only 8-pin conductors or less, you can cut off the excess 4-pin conductor connectors.

• Pre-wired doors from CECO DOOR, CURRIES, BARON and GRAHAM have special harnesses built in to house the wiring components.

• ElectroLynx is offered on the electrified hardware products of ADAMS RITE, CORBIN RUSSWIN, HES, RIXSON, SARGENT, SECURITRON and YALE

15'2" ElectroLynx cable from hinge location to ceiling

Electric hinge or pivot bridges the power from the frame to the door

In-the-door wiring harness brings power to the locking hardware or exit device

Locking hardware or exit device comes pre-wired with connectors

2

3

4

1

2

3

4

1

Plug-and-Play

Pre-wired Doors

The ElectroLynx system inside a door and frame includes a one-piece pre-fabricated wiring harness equipped with Molex connectors. The wiring harness consists of 8-pin and 4-pin ElectroLynx connectors with 22 gauge wire. It is an efficient labor-saving alternative to using conduit inside a door, which requires installation of wires at the job site.

In addition to standard doors, fire rated doors from ASSA ABLOY companies - BARON, CECO DOOR, CURRIES and GRAHAM - are also available with ElectroLynx cabling.


www.mckinneyhinge.com 1-800-810-WIRE (9473)4

Standard ElectroLynx Retrofit Cable Sizes

Actual Cable Length

12 Conductor and Molex both ends

12 Conductor and Molex one end, pinned one end

Typical Application

3" QC-C003 QC-C003P

Between hinge and the end of an exit device. 6" QC-C006 QC-C006P

12" QC-C012 QC-C012P

26" QC-C200 QC-C200P

Between hinge and through the door to the lockset or exit device trim.

32" QC-C206 QC-C206P

38" QC-C300 QC-C300P

44" QC-C306 QC-C306P

50" QC-C400 QC-C400P

15' 2" QC-C1500 QC-C1500PFrom the hinge location, up the jamb to above the ceiling, or up and around full lite or half lite metal door.

If you are not ordering ASSA ABLOY Door Group doors with the ElectroLynx cable pre-installed in the door, you must order an ElectroLynx retrofit cable to go between ANY hardware and the hinge. This includes 3" cables to go from the hinge to an exit device and up to a 15’ cable to go up and around a full lite metal door. To ensure you order the correct ElectroLynx connecting cables, follow these steps:

Are the doors preinstalled with ElectroLynx cables?

Will the existing door accommodate a 5/8" chase or raceway to allow cable with Molex connectors be pulled through?

“Yes Example”:

- A hollow metal door with no obstructions or a 5/8" conduit or raceway

“No Examples”:

- Wood doors with a 3/8" raceway

- Hollow metal doors with steel stiffeners

- Hollow metal door with full lite glass kits

You do not need to order a “through-door cable”

Order cable with Molex connectors on both ends, illustrated below

Order cable with one end with Molex connectors, and one end pinned, illustrated below

Also order a 15' cable to go from the frame side hinge location, inside the wall up to the ceiling for termination

What length of retrofit cable should you order?

From the examples below, measure from the hinge location to the hardware location. * Add 2" to the length

Door with 3 hinges

Door with 4 hinges

Door with full lite or steel-stiffened hollow metal

Exit device with 3 hinges

Exit device with 4 hinges

YES

YES

NO

1 2 3

NO



1-800-810-WIRE (9473) 5

McKINNEY QC Concealed Circuit Electric HingesThe McKINNEY ElectroLynx® hinge is an intermediate connector that passes a constant flow of current between the source of power (jamb) and the actuated devices in the door (electric locks, exit devices, etc.) regardless of door position. Each hinge features concealed plug connectors that eliminate the need for separate or exposed wiring. Brass eyelets add protection and durability to the ElectroLynx hinge and common wire colors and standard connectors make installation quick and simple. Once installed, it will give no outward indication of its function and will transmit power efficiently and reliably, as long as the wire capacity is not exceeded.

All ElectroLynx hinges are factory tested and specially packaged to minimize against damage during shipment. Installation instructions are packed with each hinge. 28 Gauge multi-strand wires are used. A 6" pigtail is provided for connection to the source wiring, and additional 6" pigtails may be requested. The wire colors are with the electromechanical hardware of other ASSA ABLOY brands.

• An 8 position connector is used for QC2, QC4 QC6 and QC8 wire hinges

• An 8 position and 4 position connector is used for QC12 wire hinges

• QC2, 4 or 6 hinges are available for special applications, but are not used with the decision tree found on page 4

Please call 1-800-810-WIRE (9473) if you are in doubt regarding hinge requirements.

QC12

Available up to 12 wires

• Rated 4 amp continuous @ 24 volts AC or DC, 16 amp pulse for 300 milliseconds (cycle time not less than 5 seconds), 10 amp pulse for 250 milliseconds (cycle time not less than 5 seconds)

• Optional MG-16 mortar guard available (mortar guard required on steel frames)

• Steel and Stainless Steel QC hinges are UL listed for use up to and including 3 hour rated openings

• QC2 wire hinges provided with 8 position connector for new construction, specify QC2

* Consult customer service for availability

3- Knuckle 5- Knuckle

TA314 TA2314

TA714 T4A3386

TA386 T4A3786

TA786 TA2895

T4A3395

T4A3795

Full Mortise QC hinges are available in most BHMA and McKINNEY powder coat finishes

How to order string

4½X4½ TA2714 26D QC12

Pigtailassembly

Maleconnector

Femaleconnector

Back of 12 wire hinge shown


www.mckinneyhinge.com 1-800-810-WIRE (9473)6

McKINNEY ElectroLynx Power over Ethernet (PoE) Hinge

The McKINNEY ElectroLynx PoE, the next phase of Quick Connect hinge products by McKINNEY, provides for the passing of Ethernet data through the door opening. Installation is a snap with the friendly “plug and play” connectors which allow power to be linked from the incoming source through the door to the electrified hardware. PoE data is bidirectional.

Brass eyelets add protection and durability to the PoE hinge which features common wire colors coordinated to work with intelligent Power over Ethernet electromechanical hardware from SARGENT and CORBIN RUSSWIN.

The PoE hinge should be installed in the second from bottom hinge position on the door. Once installed, it will give no outward indication of its function and will transfer power and data efficiently and reliably, as long as the wire capacity is not exceeded.

All PoE hinges are factory tested and specially packaged to minimize damage during shipment. Installation instructions are packed with each hinge. Along with the PoE hinge, mating PoE door and frame side harnesses are required, to complete the opening. The required PoE harnesses must be ordered separately (see below for detail).

Specify suffix PoE. Consult factory for the availability of additional finishes and hinge types.

Patent Pending

Each hinge features two 6-position and two 4-position Molex connectors, 9 multistrand wires; 2 twisted pairs (26 AWG), 4 straight conductors (28 gauge) and 1 straight conductor (22 AWG) with concealed plug connectors that eliminate the need for separate or exposed wiring. Rated 350 mA continuous @ 48 volts DC nominal, the hinge is capable of two PoE wiring configurations:

1. Power over Data (5 wire); Power and Data supplied together over the 2 twisted (26 AWG) pairs and the 22 AWG conductor is used for the earth ground connection.

2. Data with Power over spares (9 wire); Data over 2 twisted (26 AWG) pairs with Power over spare pairs (4 straight 28 AWG conductors) and the 22 Awg conductor is used for the earth ground connection.

Power over Ethernet Hinge Features

Standard ElectroLynx Power over Ethernet (PoE) HarnessesHarnessLength

McKINNEYCatalog #

Door Side Application

30" PoE-C206P 20" to 25" door width (doors with 3 butt hinges with PoE hinge in center to stile to stile raceway to lock prep).





Frame Side Application

180" PoE-C1500P From the hinge location, up the jamb to wall/ceiling

NOTES: The PoE door & frame harnesses can accommodate a variety of new (with raceway) and retrofit applications.

Connectors are small enough to run through a 3/8" (min.) stile-to-stile door raceway.

Connects to intelligent Power over Ethernet electromechanical hardware from SARGENT and CORBIN RUSSWIN.

McKINNEY CATALOG # Description:

4.5 x 4.5 TA2714 26D PoE Standard Weight 5 Knuckle

4.5 x 4.5 T4A3786 26D PoE Heavy Weight 5 Knuckle



1-800-810-WIRE (9473)

CORBIN RUSSWIN Hinge

Access Control Products - All Device Types

Access 600 Series RNE1 QC12

Access 800 Series NE1 QC8

Access 800 Series AC2 (Hard Powered) QC8

Cylindrical Locksets CL3300 Series

All Functions QC8

Mortise Locksets ML20900 Series

All Functions / Options QC8

Electrified Exit Devices ED5000 / ED4000

All Functions / Options (Exception M93, M61) QC8

M93 (Latch Bolt Monitor) Alone or in combination with any other option

QC12

M61 (Alarmed Exit with M35 Hardwired Option) QC12

Electrified Exit Trim 9900 Series

All functions / Options QC8

Hinge Wiring Requirements

SARGENT Hinge


Harmony Series QC12

Profile Series v.N1 QC8

Profile Series v.G1.5 (Hard Powered) QC8

Cylindrical Locksets 10 Line / 8 Line


Mortise Locksets 8200 Series

All Functions / Options (Exception LX, DX) QC8

LX (Latchbolt Monitor) QC12

DX (Deadbolt Monitor) QC12

Electrified Exit Devices 80 Series

All Functions / Options (Exception 56-, TL-, 59-, AL-) QC8

56- (Electronic Latch Retraction) Timer Function Only QC12

TL- (Electro-Luminescent) QC12

59- (Electroguard Delayed Egress) Remote Alarm, Latchbolt Mon. QC12

AL- (Alarmed Exit with 546 Harness - Hardwired Option) QC12



Electrified Exit Devices AND Electrified Trim Combination

All Options with All Trim (Exception 56-, TL-, 59-, AL-, 54-) QC12

56- (Electronic Latch Retraction) Timer Function Unavailable QC12

TL- (Electro-Luminescent) Unavailable QC12

59- (Electroguard Delayed Egress) Remote Alarm, Latchbolt Unavailable

QC12

AL- (Alarmed Exit) Remote Reset and Door Position inputs Unavailable

QC12

54- (Trim Monitor Switch) Normally Closed Switch option Unavailable

QC12

YALE Hinge


Symphony Series QC12

eBoss Series (Hard Powered) QC8

Cylindrical Locksets 5400LN / 5300LN Series


Mortise Locksets 8800 Series

All Functions / Options (Exception LBM, DBM) QC8

LBM (Latchbolt Monitor) QC12

DBM (Deadbolt Monitor) QC12

Electrified Exit Devices 7000 Series

All Functions / Options (Exception O, A) QC8

O (Latch Bolt Monitor) Alone or in combination with any other option

QC12

A (Alarmed Exit with HW Hardwired Option) QC12



7


www.mckinneyhinge.com 1-800-810-WIRE (9473)

McKINNEY Aluminum Continuous Electrified Hinges

The McKINNEY electrified continuous hinge is furnished with bonded, 4-conductor flat cable with connectors at each leaf. Two options allow variable degrees of service to be performed at the specific location of current carrying cables via either a removable 8" or a pivoting 8" section of the hinge. Both of these options, SER and ACC are available as 4, 8 or 12 wire configurations on our Full Mortise Aluminum Continuous Hinges.

Serviceable/Removable (SER) - The hinge is furnished to be installed in three sections, allowing the current carrying cables to be serviced or replaced without removing the door from the frame. Additionally the SER option allows the current carrying cables to be safely stored or delivered to the electrician or security contractor prior to the installation of the electrified hardware, eliminating the necessity of the electrician or security contractor being present when the doors are being hung.

Accessible (ACC) – The hinges are furnished to be installed in a single section with each leaf modified to pivot at the location of the current carrying cables and allow access to the cables and connected wiring. Electrical modification is in the center of the hinge.

Features:

• Performance tested 1,250,000 cycles with the 4-conductor flat cable

• Each 4-conductor cable carries 4 amps @ 24volts with a 16 amp inrush current for 300 milliseconds

• Each hinge is provided with a 4 amp in-line fuse to protect the cable from any overload or surge in power

• Flat cable conductor is warranted for 5 years

• Hinges are handed

Serviceable “SER” option shown

McKINNEY Stainless Steel Pin & Barrel Continuous Electrified Hinges

Features:

• The McKINNEY EL option is available on FM300, FM3500 and FM3700 edge mount hinges (not available on raised barrel applications)

• 14 Gauge, type 304 stainless steel, features .25 diameter stainless pin

• Symmetrically templated hole pattern

• FM300 & FM3700 Supports weight up to 600 lbs.; FM3500 supports up to 900 lbs. (maximum 4'0" door width)

• Hinges are handed

• Optional ETAP electrical transfer prep available

• Available in 4, 8 or 12 wire configurations

EL Concealed Current Transfer (Standard Prep Locations)

For McK-FM300, McK-FM3500, McK-FM3700

EL-4 Qty (4) 28 Gauge Wires



• Available on full mortise aluminum continuous hinges

• Each electrical prep is supplied with a 48" and 96" wire harness

• ElectroLynx HC-6/4 or HC-6/8 pigtails are included in pack for installation with other ASSA ABLOY ElectroLynx products

• Electrical modification meets new SDI location at center of hinge

• Standardized prep locations on 83", 85", 95" and 120" hinges

8



1-800-810-WIRE (9473)

Door Cord and Electrical Transfer (EPT)

McK-TSB-C Door Cord

• Simplest and most economical solution for power transfer

• Consists of an 18" or 36" armored stainless steel cable and plastic end pieces in light gray and black

• Cable has an interior diameter of .25"

• Supports interior wire cables up to .2"

Part Number Description

McK-TSB-C Door cord with gray/black caps 18" cord

McK-TSB-CXL Door cord with gray/black caps 36" cord

How to Order

McK-EPT Electrical Power Transfer

• Installs in the door and frame edges

• Accepts a thick cable and protects it within a flexible steel shield

• Device that will work on most doors hung using butt hinges, continuous hinges or pivots

• Will not function on a center pivot door


McK-EPT Electrical power transfer

McK-EPTL Electrical power transfer, long

McK-EL-EPT ElectroLynx EPT -12 wire

McK-EL-EPTL ElectroLynx EPTL -12 wire

How to Order

EPT can be ordered with ElectroLynx by specifying McK-EL-EPT or McK-EL-EPTL.

9


www.mckinneyhinge.com 1-800-810-WIRE (9473)

Service Kit and Tools

Miscellaneous Parts


1 bag (100 pc) QC-RF2 Female receptacle (2ckt)



1 bag (100 pc) QC-RM2 Male plug (2ckt)



1 bag (100 pc) QC-FT2024 Female terminal (AWG 20-24)

1 bag (100 pc) QC-FT2630 Female terminal (AWG 26-30)

1 bag (100 pc) QC-MT2024 Male terminal (AWG 20-24)

1 bag (100 pc) QC-MT2630 Male terminal (AWG 26-30)

1 bag (10 pc) QC-DCC Pinning assembly guideThe plug and receptacle connectors are designed to mate and lock together as shown in the figure. Plug the connectors onto each other with the locking mechanism aligned as indicated.

Locking mechanism

Male plug (8 circuit)Female receptacle (8 circuit)

Female receptacle requires female terminal

Male plug requires male terminal

QC-R003 Molex Hand Crimp Tool

The crimp tool is required for adding Molex terminals (connector pins) to wires used with ElectroLynx products.

The tool is intended for low volume, or repair requirements only.

QC-R002 Extraction Tool

The extraction tool is a simple hand tool used to remove damaged terminals from an ElectroLynx female receptacle or male plug.

QC-R001 Service Kit

The service kit includes a quantity of every different type of connector and terminal required for repairing product connections/ terminations or pinning wires on certain retrofit harnesses. Contains 10 each 2, 4, 8 molex receptacles and plugs as well as corresponding terminals, extraction tool and pinning assembly guide.

QC-DCC Pinning Assembly Guide

Included with every pinned conductor to aid in wire assembly.

10



1-800-810-WIRE (9473)

Connection Pin

Color Wire

1 Black

2 Red

3 White

4 Green

5 Orange

6 Blue

7 Brown

8 Yellow

2 Thru 8 Wire

812

34

56

712

34

Connection Pin

Color Wire

1- #9 Violet

2- #10 Gray

3- #11 Pink

4- #12 Tan

10 Thru 12 Wire

812

34

56

712

34

ASSA ABLOY Standard Pinout Colors

NOTE: Door and frame should be prepared per the proper hinge template before installing the hinge.

Wire Specifications:

28 Ga. stranded w/PTFE insulation, NEMA HP-3. Each conductor is colored differently for ease of identification.

Electrical Rating:

4 amp continuous @ 24 volts AC or DC, 16 amp pulse for 300 msec. (cycle time not less than 5 sec.), 10 amp pulse for 250 msec. (cycle time not less than 5 sec.)

Location:

The QC Hinge should be located in the second from the bottom hinge preparation on the door and frame.

NOTE: Hinges with up to 8 wires will have an 8 position connector on them. If there are more than 8 and up to 12 wires there will be a 4 position connector in addition to the 8 position connector.

11

Table of ContentsHingeMK TA2714 4-1/2" x 4-1/2"

Electric HingeMK TA2714-QC12 4-1/2" x 4-1/2"

Access Control Mort LockRU ML20606-TCRNE1-SEC NSARU ML20606-TCRNE1-SEC NSA - 2RU ML20606-TCRNE1-SEC NSA - 3

Surface CloserNO 2800ST/PS2800ST

Mop PlateRO K1050

five knuckle standard weight series - openings studio...• “s” (sherardizing, our additional...

Documents