1

FleetShield is a new exciting product from Dulux catering for

commercial vehicle (CV) refinishing.

FleetShield offers 5 different premium quality two pack bases, increasing

colour range and superior coverage.

A complete range of solid colour tinters and pearls tinters to tint, match

and customise any single layer 2K colour.

1200 colours are available for the Dulux 2K PR system with a approximately

200 colours added from local matching & aligned with Snapshot.

FleetShield offers a complete range of ancillary products, primers, clears

and a range of hardeners and thinners to suit all temperatures and job

sizes.

Flattening base for reduced gloss levels.

A complete range of products to suit plastic parts.

2

Base Line Shade Max Tint

By Weight

Colours which can be Tinted

Red Base 428-S0011 20% Red, maroon, dark orange

Yellow Base 428-S0062 20% Yellow, mid to light orange, bright green

Clear Base 428-S0047 30% Mid to dark blue, green and purple, pearl

White Base 428-S0204 20% Light blue, green, purple, light grey and all white.

Black Base 428-89943 20% Mid grey to Black

RED_BASE___ _ YELLOW BASE___________CLEAR BASE___________ CLEAR /WHITE BASE

3

White Base 428-S0204 is aligned with Autospeed PR 427-T0204.

Replaces HS White 488-89289 with Approx 20% less pigment

Red Base 428-S0011 is aligned with Autospeed PR 427-T0011.

Yellow Base 428-S0062 is aligned with Autospeed PR 427-T0062.

Black Base 428-89843 is aligned to 2K Black 488-89843

and is unchanged.

4

Break down of the 38 Tinters

Reds 12

Oranges 2

Yellows 6

Greens 4

Blues 7

Violets 2

Blacks 4

White 1

38 tinters

30 x 0.9L tinters

8 x 3.7L tinters

4 x reduced strength

Tinters included

PR 2K tinters are used to tint the 5 Bases

5

46 Pearl tinters can be used to match and customise colours.

Mixture of Mica and special effect pearls.

9 special custom pearls.

Can be mixed into Clear base.

Can be mixed into coloured bases.

Mixing

TBA

6

AUTOSPEED MT Flat Base

485-89915 x 0.9L

Used to achieve

Matt Finish 10% Gloss

Satin finishes 30% Gloss

Semi Gloss 50% Gloss

Mixing

Matt Finish 70 – 80% by weight

Satin Finish 20 – 30% by weight

Semi Gloss 30 – 40% by weight

*MT Flat Base is mixed in after hardening colour

7

AUTOSPEED Flex Additive

485-89930 x 0.9L

Add to primer, colour and clear

Add 20% Flex Additive prior to hardener

AUTOSPEED Plastic Cleaner

485-S0017 x 4L

Cleaning with anti static properties

AUTOSPEED Plastic Primer

485-89943 x 5L

Adhesion to a wide range of plastic substrates

8

Hardeners

2:1 Mixing Ratio AUTOSPEED RP Hardener 980-89790 (fast)

AUTOSPEED 2K Hardener Normal 980-89290

AUTOSPEED Hardener Slow 980-S0028

Hardeners come in 1L and 2.5L sizes

Thinners

10 – 20% Thinning Ratio AUTOSPEED RP Thinner 920-89819 x 20L.

AUTOSPEED 2K Normal 920-89292 x 20L.

AUTOSPEED 2K High Temp 920-89847 x 20L.

AUTOSPEED 2K X Slow 920- 89963 x 4L.

9

Etch

Primers

Primer

Fillers

Aerosol

Primers

10

Snapshot is a spectrophotometer

designed to read colour for

easier Identification.

Works in conjunction with iPhone

and Android phones.

Dulux FleetShield app is now available for iPhone and iPad

through iTunes store

Dulux FleetShield app is now available for Android devices

through Google Play Store

11

http://duluxrefinish.rockpaint.co.jp/duluxrefinish

12

1. Click on Mix

Formula Search

which will open

this page.

2. Click on Fleet

Shield.

13

1. Select Car

Manufacture –

Commercial

Vehicles.

2. Type in Colour

code if known

3. Or

4. Type in colour

name if known

Follow on with normal Micom mixing

14

Viscosity is the measure of a fluid’s resistance to flow

Conditions that cause higher viscosity

Paint is cold especially during winter months

Container not sealed properly in storage

Container left opened to allow solvent evaporation

Using catalysed product that is past its pot life

Results of high viscosity paint

Harder application

Orange peel

High film build

Trapped air

Trapped solvent causing solvent boil

15

Hold viscosity cup by handle & completely submerge into paint

Hold stop watch in other hand, ready to start

Lift viscosity cup out of paint and start stop watch immediately

As soon as paint flow from cup breaks, stop the stop watch.

Check time on stop watch to Technical Data Sheet.

If time is out more than 2 -3 seconds either side, add reducer

Test again

Spray Viscosity

Ford Din 4 @ 250C 18 – 20 seconds

Plastic

Alloys &

Aluminium

Steel

Fibreglass

Curtains

PPE

1. Clean surface areas

with Plastic cleaner

965-S0017.

2. New plastic sand

with grey scouring

pad.

3. Repairs sand with

P240 – P320

4. Clean again Plastic

Cleaner

1. Clean areas with

Prepwash 965-

89784.

2. If required sand

repair areas P80-

P120 for body fillers

3. No repairs sand with

P180-P240

4. Red scourer for AL

5. Clean again with

Prepwash

6. No Prepwash on

body fillers

Nitrile gloves and dust /

particle mask

1. Alloys-No Repairs

CV Ultraetch or

DP42

2. Alloys Repairs

CV Ultraetch or

DP42 + HS Primer.

3. Steel

CV Ultraetch or

DP42 or Epoxy

Urethane primer,

HS Primer .

4. Fiberglass

Epoxy Urethane

Primer + HS primer

1. Apply Plastic Primer

485-89943.

2. Single wet coat

3. Allow to flash of

3 – 5 mins before

applying topcoats

Nitrile Gloves, Respirator /

air feed hood, Overalls &

eye protection

1. FleetShield 2:1 2K

mix colour.

2. 2:1:10%-20%

3. 5-10min flash off

between coats.

4. Air Dry overnight

5. Baking

30min@60oC

6. Infrared 8-20 min

depending on type

of Infra Red.

1. FleetShield 2:1 2K

mixed colour with

Flex Additive 485-

89930.

2. Plastic Parts mix

5:1 then mix at 2:1

with Hardener.

3. Curtains mix the

same.

Nitrile gloves, overalls,

Air Feed Hood & eye

protection

Substrate Preparation Primer Topcoat

Alw

ays re

fer to

Tech

nic

al D

ata

Sh

eets

& S

DS

5 Year Standard Warranty

Heavy Steel

(Chassis)

New

Heavy Steel

(Chassis)

Refurbishment

PPE

1. Degrease surface

areas with

Prepwash.

2. Sand P80 to P120

to remove rust,

flaking paint.

3. Sand P240 – P320 +

Red scouring pad to

abrade surface for

adhesion.

4. Clean again

Prepwash

1. Abrasive blast to

remove Mill Scale to

SA2.5 Standard*.

2. Clean with Prepwash

3. Sand with P80 to

P180

4. Clean again with

Prepwash. *SA2.5 Standard refers to

cleanliness of steel. Very

thorough blast cleaning.

Near white metal 85%

clean.

Nitrile gloves and dust /

particle mask

1. Etch Primer. CV

Ultraetch or DP42 or

Epoxy Urethane

Primer

2. Repairs

HS Primer

Nitrile Gloves, Respirator /

air feed hood, Overalls &

eye protection

1. FleetShield 2:1 2K

mix colour.

2. 2:1:10%-20%

3. 5-10min flash off

between coats.

4. Air Dry overnight

5. Baking

30min@60oC

6. Infrared 8-20 min

depending on type

of Infra Red.

Nitrile gloves, overalls,

Air Feed Hood & eye

protection

Substrate Preparation Primer Topcoat

Alw

ays re

fer to

Tech

nic

al D

ata

Sh

eets

& S

DS

5 Year Standard Warranty

Dulux Refinish Etch

Primer such CV

Ultraetch , DP42 and

Epoxy Urethane

Primer can be

topcoated directly

Identify whether the

Paint spec requires a

special protective

coating e.g. Zinc or

needs temperature

ratings prior to primer

coats

18

OEM Commercial Vehicles.

CV Body Builders.

CV Truck Repair.

Trailer Manufacturers.

PV Body shops who use single layer solid colours as

opposed to basecoat/clearcoat.

Retail and Inspiration opportunities.

PV Distributors.

19

This range of product contains Isocyanates

and Solvents.

Toxic fumes and vapours can be harmful.

Always wear PPE equipment.

Always refer back to Technical Data Sheets

& Safety Data Sheets.