FLEXcon® V-59FRFlame Retardant Adhesive Transfer and Coated Tapes

FLEXcon® Substrates

Polyester Polypropylene Polyimide Foil Transfer Tapes

FLX068346FLEXmark® PM

200 Clear V-59FR Spec

50K-9

FLX068602FLEXmark® PM

200 White TC-716 V-59FR

Spec 50K-9

FLX068603 FLEXmark® PP

230 H White TC-458 V-59FR

Spec 50K-9

FLX068347FLEXmark® PI

200 Amber V-59FR

Spec 50K-9

FLX068348FLEXmark® Foil

200 Silver V-59FR Spec 50K-9

FLX068231FLEXmount® TT

200 V-59FR 55 LA K

FLX068345 FLEXmount® TT

200 V-59FR 84 LA PFT

FLX068228FLEXmount® TT

200 V-59FR 50K-6

Spec 50K-9

2 mil clear polyester

2 mil white polyester

Topcoated for print-receptivity

2.3 mil white polypropyleneTopcoated for

print-receptivity

2 mil amber polyimide film

2 mil dead soft foil

2 mil mounting tape

Single 55# liner (self-wound)

2 mil mounting tape

Single 84# liner (self-wound)

2 mil mounting tape

Double liner (50# 2 sides)Recommended Applications

A

eros

pace

• Floor Coverings

• Textiles (Draperies & Upholstery)

• Seat Cushions

• Floor Padding

• Trays

• Electrical Conduits

• Air Ducting

• Cargo Covers

FAR

25.8

53 R

esul

ts1 Verdict

(Pass / Fail) PASS PASS PASS PASS PASS PASS PASS PASS

Burn Time (Seconds) 0.0 1.0 0.0 0.0 0.0 0.0 0.0 0.0

Burn Length (Inches)

5.5 5.6 7.7 2.5 0.6 5.9 5.9 6.0

Aut

omot

ive

• Seat Cushions

• Seat Belts

• Headlining

• Convertible Tops

• Armrests

• Trim Panels

• Compartment Shelves

• Head Restraints

• Floor Coverings

• Sun Visors

• Shades

• Wheel Housing Covers

• Engine Compartment Covers

FMVS

S 30

2 Re

sults

2 Verdict (Pass / Fail) PASS PASS PASS PASS PASS N/A4 N/A4 N/A4

Burning Rate

(mm/minute)N/A3 N/A3 N/A3 N/A3 N/A3 N/A4 N/A4 N/A4

Features & BenefitsFLEXcon’s V-59FR flame retardant pressure-sensitive adhesive is available in rolls of transfer tape, or coated on a variety of film substrates.

Self-Extinguishing• Developed to meet industry flame retardancy specifications including those put forth by the Federal Aviation

Administration (FAR 25.8531) and National Highway Traffic Safety Administration (FMVSS 3022).

Excellent Adhesion• Featuring high-performance adhesion to a wide range of surfaces within aircrafts and motor vehicles, V-59FR can

be used in aerospace and automotive applications.

Non-Halogenated • V-59FR is free from halogenated compounds.

Product Offering

1FAR 25.853: V-59FR at a 2 mil thickness passed FAR 25.853(a) Appendix F, Part I, (a), 1, (ii): 12 second burn protocol when tested in a number of product constructions. Please inquire with your FLEXcon sales representative or the FLEXcon Business and Technology Discovery Group for the most up-to-date list of products tested and their results.2FMVSS 302: V-59FR at a 2 mil thickness passes FMVSS 302 when tested in a number of product constructions. Please inquire with your FLEXcon sales representative or the FLEXcon Business and Technology Discovery Group for the most up-to-date list of products tested and their results.3This data is not available (N/A) because the sample self-extinguished before reaching the burn window to start the recording time.4This data is not available (N/A) because the unsupported nature of a transfer tape does not enable FMVSS 302 testing to be conducted on the product.

DISCLAIMER: FLEXcon MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE. The typical performance data and recommendations for using FLEXcon products shall be used only as a guide. All purchasers of FLEXcon products shall be responsible for independently determining the suitability of the material for the purpose for its intended use. This product is a component intended solely for further processing, manufacturing, or incorporation into a finished product. Customer is solely responsible for determining whether this product is fit for Customer’s intended use, including, without limitation, incorporation into Customer’s finished component, and for performing any additional testing that may be necessary to support Customer’s intended use. Customer is solely responsible for ensuring that its use of the component product is in compliance with the applicable laws and for obtaining any necessary clearances or approvals for its use of the component product and any finished product that incorporates the component product. Full flame-retardant test results are available upon request.

010-0-06232020

1 FLEXcon Industrial Park • Spencer, MA 01562-2642 USATelephone +1 (508) 885-8440 • FAX +1 (508) 885-8400 • www.FLEXcon.com

Research & Development

Coating

Laminating

Finishing

• Product Design• Lab Prototyping• Custom Testing• Formulation• Chemistry Modification• Custom Mixing• Technical Service• Application Development

Engineers

• Adhesive Coating• Topcoating• ISO Class 7 Cleanroom• Adhesive Thickness

Range from 0.5 mil to 4 mil

• Single- and Double- sided Coating

• Zone Coating

• Multilayer Laminations• Heat Laminations• Cold Laminations• Heat Seal Laminations

• Slitting Cut Sizes from 4” to 60” Wide

• Sheeting Sheets 8” to 102” Long

• Custom Packaging• Rewinding & Splicing

Capabilities

Columbus, Nebraska, USA

Mississauga, Ontario, CANADA

Spencer, Massachusetts, USA

Chino, California, USA

508-885-8440 PPBT@FLEXcon.com www.FLEXcon.com/flameretardant