flexible duct design to fit your exhaust duct requirements · 2 spray systems – building your...
TRANSCRIPT
exhaust duct
spray systems exhaust duct and accessories We provide all of the necessary components for exhausting your spray booths, flash tunnels, ovens and more. Complete duct options in square, round and spiral configurations are available. These options come in the following standard sizes: 6”, 12”, 18”, 24”, 34”, 42” and 48” – custom sizes are available based on your size requirements. All duct components are fabricated from galvanized sheet metal for superior resistance to rust and corrosion and meet NFPA 33 booth exhaust requirements.
Building side wall Vertical discharge exhaust
square exhaust ductexhaust Fan Roof Mounted
Round exhaust ductexhaust Fan Booth Mounted
Pitched Roof Flat Roof Building sidewall with shutter
1363 East Grand Ave., Pomona, CA 91766 • 909.623.6944 • 800.736.6944 • Fax: 909.622.6267
Combination automatic damper and weather canopy
Standard, 4’ long, exhaust stack sections
90 degree elbow
Weather canopy connects to the exhaust and fan with built-in connector ring
Weatherproof motor cover
Standard, 4’ square duct section(s)(use dual wall insulated section through combustible roof)
Mez duct connectors
Standard, 4’ square duct section
Automatic weather canopy
Maintenance access door
Tubeaxial exhaust fan
Flat type roof jack with storm collar
Spiral exhaust stack section(s)
Combination automatic damper and weather canopy
Standard, 4’ long, exhaust stack sections
Pitched roof jack(must specify roof pitch)
Combination auto-matic damper and weather canopy
Spiral, 4’ long, exhaust stack sections
Flat type roof jack with storm collar
Barometric wall shutter
Standard sectionwith ring
Flexible duct design to Fit Your exhaust duct Requirements
2 spray systems – building your booth the right way for all the right reasons
take advantage of spray systems’ square duct design
Spray Systems engineered and perfected the square duct design to provide you important flexibility and durability…
• Less static pressure loss for more efficiency• Tighter seal at connections• Smaller roof penetrations• Ability to transition to different size roof openings• Straighter installations• Stronger, more durable than round sections
• Allows for easier fan-on-roof installations• Booth runs quieter• Fan runs cooler for longer life• Easier accessibility to fan for maintenance• No exhaust leaks in facility• Custom sizes available
Specifications are subject to change without notice
sQuaRe duct (includes mez connections as needed)
sPIRaL duct (includes rings on each end)
MODEL#42-3071-1242-3071-1842-3071-2442-3071-3442-3071-4242-3071-48
DESCRIPTIONSPIRAL DUCTSPIRAL DUCTSPIRAL DUCTSPIRAL DUCTSPIRAL DUCTSPIRAL DUCT
SIZE12”18”24”34”42”48”
SHIPPING WT. 8 / ft 14 / ft 12 / ft. 18 / ft. 22 / ft. 25 / ft.
MODEL#
41-3010-2441-3085-2441-3086-2441-3014-4541-3014-9041-3073-2441-3105-3441-3107-3441-3108-3441-3015-4541-3015-9041-3074-3441-3011-3441-3087-3441-3088-3441-3016-4541-3016-9041-3075-3441-3012-4241-3089-4241-3090-4241-3017-4541-3017-9041-3076-4241-3077-00
DESCRIPTION
DUAL WALLSTRAIGHT DUCTSTRAIGHT DUCTELBOW 45 DEGREEELBOW 90 DEGREESQ TO ROUNDDUAL WALLSTRAIGHT DUCTSTRAIGHT DUCTELBOW 45 DEGREEELBOW 90 DEGREESQ TO ROUNDDUAL WALLSTRAIGHT DUCTSTRAIGHT DUCTELBOW 45 DEGREEELBOW 90 DEGREESQ TO ROUNDDUAL WALLSTRAIGHT DUCTSTRAIGHT DUCTELBOW 45 DEGREEELBOW 90 DEGREESQ TO ROUNDROOF FLASHING
SIZE
16” x 28” x 4’16” x 28” x 3’16” x 28” x 4’16” x 28” x 45˚16” x 28” x 90˚16” x 28” TO 24” dia16” x 40” x 4’16” x 40” x 3’16” x 40” x 4’16” x 40” x 45˚16” x 40” x 90˚16” x 40” TO 34” dia28” x 28” x 4’28” x 28” x 3’28” x 28” x 4’28” x 28” x 45˚28” x 28” x 90˚28” x 28” TO 34 dia38” x 38” x 4’38” x 38” x 3’38” x 38” x 4’38” x 38” x 45˚38” x 38” x 90˚38” x 38” TO 42” diaSIZE: Per duct size
SHIPPING WT.
120 45 60 45 68 32 150 56 75 56 84 42 150 56 75 56 84 42 200 76 101 76 114 58
Standard Exhaust Duct Section
Mez Connector WithGasket and Fasteners
Angle Ring
45 & 90 Degree Elbows
Flat & Pitched Roof JacksWith Storm Collar
Weather CapWith Buttterlfy
DampersBarometric Shutter
spray systems – building your booth the right way for all the right reasons 3spray systems – building your booth the right way for all the right reasons
ROUND DUCT
DUCT COMPONENTS
MODEL#
42-3058-1042-3106-1242-3059-1242-3060-1242-3048-1242-3049-1242-3079-1242-3106-1842-3059-1842-3060-1842-3018-4542-3018-9042-3048-1842-3049-1842-3079-1842-3106-2442-3059-2442-3060-2442-3024-4542-3024-9042-3048-2442-3049-2442-3079-2442-3106-3442-3059-3442-3060-3442-3034-4542-3034-9042-3048-3442-3049-3442-3079-3442-3106-4242-3059-4242-3060-4242-3042-4542-3042-9042-3048-4242-3049-4242-3079-42
DESCRIPTION
ROUND DUCT (24 GA)INSULATED SLEEVEROUND DUCTROUND DUCTROOF JACK (FLAT) & storm collarROOF JACK (PITCHED) & storm collarSTORM COLLARINSULATED SLEEVEROUND DUCTROUND DUCTELBOW, 45 DEGREEELBOW, 90 DEGREEROOF JACK (FLAT) & storm collarROOF JACK (PITCHED) & storm collarSTORM COLLARINSULATED SLEEVEROUND DUCTROUND DUCTELBOW, 45 DEGREEELBOW, 90 DEGREEROOF JACK (FLAT) & storm collarROOF JACK (PITCHED) & storm collarSTORM COLLARINSULATED SLEEVEROUND DUCTROUND DUCTELBOW, 45 DEGREEELBOW, 90 DEGREEROOF JACK (FLAT) & storm collarROOF JACK (PITCHED) & storm collarSTORM COLLARINSULATED- SLEEVEROUND DUCTROUND DUCTELBOW, 45 DEGREEELBOW, 90 DEGREEROOF JACK (FLAT)& storm collarROOF JACK (PITCHED) & storm collarSTORM COLLAR
SIZE
10” x 10’12” x 4’12” x 3’12” x 4’12” 12”12”18” x 4’18” x 3’18” x 4’ 18”18”18”18”18”24” x 4’24” x 3’24” x 4’24”24”24”24”24”34” x 4’34” x 3’34” x 4’34”34”34”34”34”42” x 4’42” x 3’42” x 4’42” 42”42”42”42”
SHIPPING WT.
53 50 19 25 10 10 5 76 29 38 22 45 15 15 8 101 38 50 33 60 20 20 10 154 53 72 50 90 30 30 15 166 66 88 75 143 45 45
20
MODEL#
43-3001-0043-3002-1243-3002-1843-3002-2443-3002-3443-3002-4243-3002-4842-3006-0041-3007-0042-3006-0141-3007-0143-3027-2443-3028-3443-3029-3443-3030-4243-3104-0043-3092-1043-3092-1843-3092-2443-3092-3443-3092-4243-3097-0843-3097-1043-3098-1043-3099-1243-3098-1243-3100-1243-3091-1843-3091-2443-3091-3443-3091-42
DESCRIPTION
GUY WIRE KITANGLE RINGANGLE RINGANGLE RINGANGLE RINGANGLE RINGANGLE RINGCLEAN OUT DOOR, CURVEDCLEAN OUT DOOR, FLATCLEAN OUT DOOR, CURVEDCLEAN OUT DOOR, FLATMEZ CONNECTOR (SET)MEZ CONNECTOR (SET)MEZ CONNECTOR (SET)MEZ CONNECTOR (SET)MOTOR COVER (FITS UP TO 7.5)REAR EXHAUST KITSHUTTERSHUTTERSHUTTERSHUTTERVENT, ALL PURPOSE RDVENT, ALL PURPOSE RDVENT, CHINA CAPVENT,ALL PURPOSE RDVENT, CHINA CAPVENT, ROOF JACKWEATHER CAPWEATHER CAPWEATHER CAPWEATHER CAP
SIZE
25”12”18”24”34”42”48”8” x 12”8” x 12”12” x 16”12” x 16”16” x 28”16” x 43”28” x 28”38” x 38”
18”24”34”42”8”10”10”12”12”12”18”24”34”42”
SHIPPING WT.
3 4 6 8 15 22 25 5 5 7 7 5 6 6 8 10 35 10 10 20 23 4 8 12 15 15 10 33 52 65 85
an american tradition of excellence
the spray systems advantage Located in Pomona, California since 1978, our 45,000 square foot facility houses state-of-the-art machinery operated by dedicated and highly skilled team members. With more than 35 years of experience in the design, fabrication and installation of spray booths, we can deliver to you the custom products, precision engineering, and responsive service to ensure your complete satisfac-tion – whatever your company size, finished product specifications, production rates, or coating needs.
enjoy Our Wide selection and Flexible design We feature more than 300 booth design options for a wide variety of uses, and specialize in custom designs for the most unique of applications. To ensure full integration, our spray booth design will take into account all of your specific finishing requirements, including filtration, lighting, temperature, humidity and air flow.
discover Precise, custom tailored engineering solutions All booths are custom designed using the latest version of AutoCAD to en-sure precision and prevent against interference fit – early detection in the design stage prevents costly field modifications for you. We feature easy-to-read and easy-to-follow isometric assembly drawings. Each panel and component part is identified with a computer-generated label that precisely matches the CAD-produced, exploded-view assembly drawing – all making installation efficient and trouble-free.
Receive unparalleled Personal attention Spray Systems is com-mitted to providing you dedicated service and support that place a high value on accountability and quality control. That means walking you through every phase of the design and installation process and tailoring our manufacturing to your specific requirements. We want to ensure the on-going success of your spray booth training, service, and operations. For us, quality of service doesn’t end with the installation.
discuss Your spray Booth Needs With Your spray systems advisor800 736-69441363 East Grand AvenuePomona, CA 91766 Phone 909 623-6944 • Fax 909 622-6267
www.spraysystems.com
call For a Free consultation
spray systems – building your booth the right way for all the right reasons
Where custom designs are standard
Booth designs
• Open Face Booths• Enclosed Booths -Cross Draft -Down Draft -Side Down Draft -Semi-Down Draft -Spray Bake
Booth types
• Bench Booths• Blasting Enclosures• Booth Extensions• Conveyorized Spray Booths• Customized Duct Designs• Dry Filter/Industrial Booths• Dust Collectors• Grinding Booths• Powder Booths -Recovery type -Non-Recovery type• Truck and Large Equipment Booths• Water Wash Spray Booths -Centrifuge Sludge Systems -Pump Type -Pumpless Type
additional Options
• Air Make-up Units• Booth Extensions• Electrical Control Panels• Flash Tunnels• Ovens -Drying Enclosures -Convection (gas or electric) -Infrared (catalytic and electric)• Turnkey and Custom Systems• VOC Abatement Systems