flexible room solutions with enocean · shades thermostats sensors. a perfect partnership ... place...

FLEXIBLE ROOM SOLUTIONS WITH ENOCEAN

Clear advantages thanks to installation-friendly

radio technology

Easyclickpro

Cutting-edge technology

EnOcean wireless technology

Easyclick is based on the EnOcean standard with excellent investment security thanks to its prevalence and compatibility. This flexible wireless solution communicates free of interference on the 868 MHz frequency.

– No batteries or cables– Flexible and easy to install– Reduces fire loads– Maintenance free– Energy efficient– A safe investment– Allows solutions for Class A in accordance with EN15232

RS-485 bus,e.g. 16 antennascan be connected

Easy commissioning

Bidirectional

Lights

Shades

Thermostats

Sensors

A perfect partnership

PEHA‘s EnOcean range is a per-

fect complement to CentraLine‘s

building automation systems.

These innovative, wireless

communicating elements are

easy to install. They find their

place perfectly in renovations

and conversions too.

For more than 90 years, PEHA has played a key role

in modern electrical installations with a compelling,

full range of high-quality products. Great emphasis

is placed here on issues such as energy efficiency,

comfort and safety, both in residential and functional

buildings. The solutions offer a high level of flexibility,

are easy to install and can be commissioned quickly.

Whether wired or wireless – PEHA offers comfort and

attractive design.

for over 90 years

Tradition and innovation

Antenna and FBox 4

Wall-mounted transmitters 5

Receivers 8

Thermostat 12

Room control device 13

Actuators 14

Sensors 15

Contents

4

Integration and programming

The core element is the antenna, which is connected to the controller. FBoxes in accordance with the EEP profile are available for all EnOcean components (wall-mounted transmitters, hand-held transmitters, hotel keycard switches, window contacts, motion sensors and switch receivers).

– Surface installation– Connection to controllers via RS-485– Can be expanded with additional antennas if required– Simple programming

Easyclickpro antenna module

The bidirectional Easyclick antenna module receives all signals from Easyclick transmitters and repeaters in its reception range. These signals are then conveyed via an RS485 interface to a controller.

Technical information: – The plastic housing is suitable for surface installation on walls or ceilings and features a white

cover. – Connection terminals for the RS-485 bus– Protection rating IP 20, 868.3 MHz– Power consumption on stand-by = approx. 0.4 W– In operation = approx. 22 mA/0.5 W– Housing dimensions Ø approx. 130 mm, H approx. 29 mm

SBC white D 450 ANT 00377816

CentraLine white D 450 ANT AX 00377806

EnOcean | Antenna and FBox

Easyclickpro comfort hand-held transmitter, 128 channels for commissioning

The bidirectional Easyclick comfort hand-held transmitter is a user-friendly remote controller for Easyclick receivers and all other receivers that use EnOcean technology. The Easyclick comfort hand-held transmitter is therefore ideal for switching and dimming lighting, controlling shades, shutters and awnings and many other electrical loads. The device also offers the installer EnOcean service functions for range planning and can be used to check functions during commissioning. Supplied: 3 AAA NiMH rechargeable batteries with USB charger and separate USB cable.

Technical information:– 128 bidirectional wireless channels– 32 configurable levels– Time and date display, temperature display in °C or °F– Pre-defined symbols– Can be locked with PIN code– 32 programmable time switches– 8 configurable quick selection buttons– The levels with the list entries can be fully configured on the hand-held transmitter– The PC software is available online at www.peha.de– Expansions and software updates are made via download– With the help of the software, up to 32 user functions (e.g. light scenes)

with up to 16 actions can be configured– EnOcean service functions, such as ID display, wireless signal quality check

and a RadioLink test allow a range test between two Easyclick comfort hand-held transmitters– Dimensions: 165 × 55 × 21 mm

black D 450 FU-HS 128 00364936

Colour Item No. Order No.

5EnOcean | PEHA Easyclick wall-mounted transmitters

Wall-mounted transmitters

Easyclick wall-mounted transmitters require no batteries or maintenance, with energy generated at the push of a button. The PEHA Easyclick wireless system transmits on the 868.3 MHz frequency used across Europe. Products may only use this frequency if they transmit 1% = 36 seconds per hour. This reduces the risk of interference to a minimum. Modulation type: ASK Amplitude Shiftkeying. The range between transmitter and receiver in a house is approx. 30 m when penetrating two structural walls. Depending on the construction type, up to 32 transmitters can be taught on a single receiver. The transmitters can be mounted on the wall using screws or adhesive. They can be used to expand existing flush-mounted combinations and can be installed without additional flush-mounted boxes.

NOVA combination frames

For vertical and horizontal installation

Single, dimensions 83 × 83 mm pure white D 20.671.022 T 00020111

aluminium D 20.671.702 T 00050111

Dual, dimensions 83 × 154 mm pure white D 20.672.022 T 00020211

aluminium D 20.672.702 T 00050211

Feller EDIZIOdue frame

Available from your wholesalerPEHA switch compatible with single frame only


EnOcean wall-mounted transmitter ranges Choice of range

NOVA switch range

Choose from the range of EnOcean wall-mounted transmitters

&Choose a suitable

single or dual frame

Switch range compatible with EDIZIOdue by Feller

Choose from the range of EnOcean wall-mounted transmitters

& Not compatible with dual frame

NOVA

6

NOVA switch range

Easyclick wall-mounted transmitter, neutral, 2-channel

Rocker with middle position, without printing H = 15 mmWithout combination frameSee switch range for combination frames

pure white D 20.450.022 FU-BLS N 00030313

aluminium D 20.450.702 FU-BLS N 00060313

Easyclick wall-mounted transmitter, neutral, 4-channel

Series rocker with middle position, without printing H = 15 mm,Without combination frameSee switch range for combination frames

pure white D 20.455.022 FU-BLS N 00030613

aluminium D 20.455.702 FU-BLS N 00060613

Easyclick wall-mounted transmitter, 2-channel

Rocker with neutral middle position and I/O printingH = 15 mmWithout combination frameSee switch range for combination frames

pure white D 20.450.022 FU-BLS 00030113

aluminium D 20.450.702 FU-BLS 00060113

Easyclick wall-mounted transmitter, 4-channel

Series rocker with neutral middle position and I/O printingH = 15 mmWithout combination frameSee switch range for combination frames

pure white D 20.455.022 FU-BLS 00030413

aluminium D 20.455.702 FU-BLS 00060413

Easyclick wall-mounted transmitter, 2-channel, e.g. for a shutter

Rocker with neutral middle position and UP/DOWN printingH = 15 mmWithout combination frameSee switch range for combination frames

pure white D 20.450.022 FU-BLS JR 00030213

aluminium D 20.450.702 FU-BLS JR 00060213

Easyclick wall-mounted transmitter, 4-channel, e.g. for two shutters

Series rocker with neutral middle position and UP/DOWN printingH = 15 mmWithout combination frameSee switch range for combination frames

pure white D 20.455.022 FU-BLS JR 00030513

aluminium D 20.455.702 FU-BLS JR 00060513

Easyclick hotel keycard switch

Self-powered hotel keycard switch for storing the hotel keycard and switching the electricity supply on and off in each room. Battery and maintenance-free Easyclick transmitter for surface installation with screws or adhesive for standard hotel keycard dimensions of 55 × 85 mm

pure white D 20.455.022 FU-BLS HC 00381856

aluminium D 20.455.702 FU-BLS HC 00382046

EnOcean | PEHA Easyclick wall-mounted transmitters


7EnOcean | PEHA Easyclick wall-mounted transmitters

Switch range compatible with frame for EDIZIOdue by Feller

Easyfit Universal wall-mounted transmitter, 2-channel

2-channel wall-mounted transmitter compatible with frame for EDIZIOdue by FellerWithout frame

pure white C 450.02 FU-BLS N 00321113


4-channel wall-mounted transmitter compatible with frame for EDIZIOdue by FellerWithout frame

pure white C 455.02 FU-BLS N 00321213


2-channel wall-mounted transmitter compatible with frame for EDIZIOdue by Feller With I/O printingWithout frame

pure white C 450.02 FU-BLS 00332816


4-channel wall-mounted transmitter compatible with frame for EDIZIOdue by Feller With I/O printingWithout frame

pure white C 455.02 FU-BLS 00332716

Easyfit Universal wall-mounted transmitter, 2-channel, e.g. for a shutter

2-channel wall-mounted transmitter compatible with frame for EDIZIOdue by Feller With UP/DOWN printingWithout frame

pure white C 450.02 FU-BLS JR 00332826

Easyfit Universal wall-mounted transmitter, 4-channel, e.g. for two shutters

4-channel wall-mounted transmitter compatible with frame for EDIZIOdue by Feller With UP/DOWN printingWithout frame

pure white C 455.02 FU-BLS JR 00332736

Button fixture for receiver with supporting plate

Button fixture, single button, for Easyclickpro flush-mounted receiver

Button fixture for Easyclickpro flush-mounted receiver for:D 451 FU-EBI UP O.A. D 451 FU-EBIM UP O.A.NOVA brillance, without combination frame

pure white D 20.420.022 00029513

Piano black D 20.420.192 00044513

Button fixture, two buttons, for Easyclickpro flush-mounted JR receiver

Button fixture for Easyclickpro flush-mounted receiver for: D 452 FU-EBI JR UP O.A.D 452 FU-EBIM JR UP O.A.With UP/DOWN printingNOVA brillance, without combination frame

pure white D 20.425.022 JR 00029713

Piano black D 20.425.192 JR 00044713


8

Easyclickpro 1-channel receiver

Easyclickpro flush-mounted receiver, bidirectional, 1-channel

The bidirectional Easyclickpro receiver not only receives radio signals, but also responds with its status upon every status change. Real switch statuses (ON/OFF) can be visualised on a building management system (BMS) for example.

D 451 FU-EBI O.T. 00364316

Easyclickpro flush-mounted receiver, bidirectional, 1-channel with energy measurement

In addition to the bidirectional functions, the Easyclickpro receiver version with integrated energy measurement (energy measuring chip) allows the energy figures for the connected load to be recorded.

D 451 FU-EBIM O.T. 00366536

Easyclickpro baldachin receiver, bidirectional, 1-channel

The bidirectional Easyclickpro receiver not only receives radio signals, but also responds with its status upon every status change. Real switch statuses (ON/OFF) can be visualised on a building management system (BMS)for example.

D 451 FU-BEBI 00364376

Easyclickpro baldachin receiver, bidirectional, 1-channel with energy measurement

In addition to the bidirectional functions, the Easyclickpro receiver version with integrated energy measurement (energy measuring chip) allows the energy figures for the connected load to be recorded.

D 451 FU-BEBIM 00366616

EnOcean | PEHA Easyclickpro receivers

The Easyclickpro receiver is used to switch lighting and other electrical loads.

Various functions and parameters can be selected:– Two-button operation ON/OFF (standard function)

– Single-button operation ON/OFF (switch)

– Button operation (impulse)

– Hotel keycard switch with selectable delay time

– Stairwell light with selectable running time and switch-off warning

– Automatic OFF after selectable running time

– Fan function with delayed ON and selectable delay time

– Save and call up 4 light scenes at the push of a button (one scene per button)

– Window handle and contact, visualisation parallel to the switch outputs

– Motion sensor and light sensor

– One function can be set individually for each taught transmitter (max. 32 transmitters)

– Integrated repeater functions (1 or 2-level) can be activated inde-pendently of the set functions depending on the project

– Window contacts, window handles, motion sensors etc. are already assigned to the corresponding function/parameter during teaching

Technical information

Power consumption < 0.5 W (bistable relay)

Transmission frequency 868.3 MHz

Power supply 100 … 240 V~/50–60 Hz

Neutral wire Required

Ambient temperature –20 … 40 °C

Storage temperature –40 … 85 °C

Plug-in terminals Max. 1 × 1.5 mm²

Housing height 28 mm (for supporting plate: 34 mm)

Protection class IP20

Fixing brackets For screw fixings in switch boxes

Approvals CE; KEMA/KEUR

Load types 230 V~ 110 V~

Bulbs 2500 W 1250 W

HV halogen bulbs 1200 W 600 W

Motor load 600 VA 300 VA

Electronic ballast load 3 pieces 1) 3 pieces 1)

¹⁾ The quantity depends on the type and manufacturer. Please read the data sheet for the device!

Item No. Order No.

9EnOcean | PEHA Easyclickpro receivers


Easyclickpro flush-mounted receiver, 1-channel with potential-free contact

The bidirectional Easyclickpro receiver not only receives radio signals, but also responds with its status upon every status change. Real switch statuses (ON/OFF) can be visualised on a building management system (BMS) for example.The Easyclickpro receiver is used to switch lighting and other electrical loads.

D 451 FU-EBI PF O.T. 00364476

Easyclickpro flush-mounted receiver, bidirectional with supporting plate, 1-channel

The bidirectional Easyclickpro receiver not only receives radio signals, but also responds with its status upon every status change. Real switch statuses (ON/OFF) can be visualised on a building management system (BMS) for example. For the technical data, please see page 8 opposite.Requires a button fixture from PEHA.

D 451 EBI UP O.A. 00364516

Easyclickpro flush-mounted receiver, bidirectional with supporting plate, 1-channel with energy measurement

In addition to the bidirectional functions, the Easyclickpro receiver version with integrated energy measurement (energy measuring chip) allows the energy figures for the connected load to be recorded.Functions, parameters and technical data as for D 451 FU-EBI UP O.A.For the technical data, please see page 8 opposite.Requires a button fixture from PEHA.

D 451 FU-EBIM UP O.A. 00366656


Bulbs 500 W 250 W



Electronic ballast load 1 piece 1) 1 piece 1)


Item No. Order No. Item No. Order No.

Easyclick adapter receiver

The bidirectional Easyclick adapter receiver not only receives radio signals, but also responds with its status upon every status change. With its integrated energy measurement (energy measurement chip), it allows the energy figures for the the connected load to be recorded. The Easyclick receiver is used to switch lighting and other electrical loads.

CH D 4571 FU-EBIM ST CH 00364636

DE D 4511 FU-EBIM ST ST 00364576

GB D 4571 FU-EBIM ST GB 00364656

Different models of intermediate switches available according to the standards of the respective countries.CH in accordance with the Swiss standard (SEV)DE in accordance with German standardGB compliant with British standardFR with nickel-plated grounding pin

FR D 4571 FU-EBIM ST BE 00364616

Load types 230 V~

Bulbs 2500 W

HV halogen bulbs 1200 W

Motor load 600 VA

Electronic ballast load 3 pieces1)

1) The quantity depends on the type and manufacturer. Please read the data sheet for the device!

10 EnOcean | PEHA Easyclickpro receivers

The Easyclickpro receiver is used to switch lighting and other electrical loads.

Various functions and parameters can be selected:– Two-button operation (standard function ON/OFF)

– Single-button operation (switch ON/OFF)

– Button operation (impulse)

– Hotel keycard switch with selectable delay time

– Stairwell light with selectable running time and switch-off warning

– Automatic OFF after selectable running time

– Fan function with delayed ON and selectable delay time

– Save and call up 4 light scenes at the push of a button (one scene per button)

– Window handle and contact, visualisation parallel to the switch outputs

– Motion sensor and light sensor

– One function can be set individually for each taught transmitter (max. 32 transmitters). The channels can be programmed inde-pendently of each other.

– Integrated repeater functions (1 or 2-level) can be activated independently of the set functions depending on the project

– Window contacts, window handles, motion sensors etc. are already assigned to the corresponding function/parameter during teaching




Power supply 100–240 V~/50–60 Hz

Neutral wire required


Storage temperature -40 … 85 °C


Housing height 28 mm





Bulbs 500 W 250 W



Electronic ballast load 1 piece 1) 1 piece 1)



Easyclickpro flush-mounted receiver, bidirectional, 2-channel

The bidirectional Easyclickpro receiver not only receives radio signals, but also responds with its status upon every status change. Real switch statuses (ON/OFF) can be visualised on a building management system (BMS) for example.

D 452 FU-EBI O.T. 00364336

Easyclickpro flush-mounted receiver, bidirectional, 2-channel with energy measurement

In addition to the bidirectional functions, the Easyclickpro receiver version with integrated energy measurement (energy measuring chip) allows the energy figures for the connected load to be recorded. Functions, parameters and technical data as for D 452 FU-EBI O.T.

D 452 FU-EBIM O.T. 00366556

Item No. Order No.

11

Easyclickpro flush-mounted shade and shutter receiver, 2-channel

Easyclickpro flush-mounted shade and shutter receiver, bidirectional, 2-channel

The bidirectional Easyclickpro JR receiver not only receives radio signals, but also responds with its status upon every status change.

D 452 FU-EBI JR O.T. 00364356

Easyclickpro flush-mounted shade and shutter receiver, bidirectional, 2-channel with position recognition

In addition to the bidirectional functions, the Easyclickpro receiver version with position recognition allows the running times of shutters and shades to be recorded and reported. Functions, parameters and technical data as for D 452 FU-EBI JR O.T.

D 452 FU-EBIM JR O.T. 00366576

Easyclickpro flush-mounted shade and shutter receiver, bidirectional with supporting plate, 2-channel

The bidirectional Easyclickpro JR receiver not only receives radio signals, but also responds with its status upon every status change.Requires a button fixture from PEHA.

D 452 FU-EBI JR UP O.A. 00364536

Easyclickpro flush-mounted shade and shutter receiver, bidirectional with supporting plate, 2-channel with position recognition

In addition to the bidirectional functions, the Easyclickpro receiver version with position recognition allows the running times of shutters and shades to be recorded and reported. Functions, parameters and technical data as for D 452 FU-EBI JR UP O.A. Requires a button fixture from PEHA.

D 452 FU-EBIM JR UP O.A. 00366676

The Easyclickpro receiver is used to control shutters and shades.

Various functions and parameters can be selected:– Two-button operation UP/STOP/DOWN with slat adjustment

(standard function shade)

– Two-button operation UP/STOP/DOWN without slat adjustment (standard function shutter)

– Jog mode (pushbutton follower)

– Single-button operation UP/STOP/DOWN

– Locking function for added safety when carrying out maintenance work

– Automatic ON/OFF

– Sun sensor/twilight sensor/wind sensor/rain sensor

– 4 position situations TOP/BOTTOM for light scenes

– Lock-out protection with window contact/window handle

– One function can be set individually for each taught transmitter (max. 32 transmitters)

– Integrated repeater functions (1 or 2-level) can be activated independently of the set functions depending on the project

– Window contacts and window handles are already assigned to the corresponding function/parameter during teaching.




Power supply 100–240 V~/50–60 Hz

Neutral wire required


Storage temperature -40 … 85 °C


Housing height 28 mm (for supporting plate version: 34 mm)




Connection data I max. 1.0 A

EnOcean | PEHA Easyclickpro receivers

Item No. Order No. Item No. Order No.

12

Easyclickpro thermostat

Easyclickpro room temperature sensor with solar energy accumulator

For recording temperatures when using individual room controllers, with integrated temperature sensor. The room temperature sensor transmits the measurement values to receivers and gateways with no need for a battery.Compatible with the NOVA range of switches.Optional: Backup battery CR1632EnOcean profile: EEP A5-02-05

High gloss pure white D 20.450.022 FU-RTS 00313746

aluminium D 20.450.702 FU-RTS 00313756

Easyclickpro room temperature sensor with solar energy accumulator, with setpoint

For recording temperature and local setpoint adjustment when using individual room controllers, with integrated temperature sensor and setpoint adjuster. The room temperature sensor transmits the measurement values to receivers and gateways with no need for a battery. Compatible with the NOVA range of switches.Optional: Backup battery CR1632EnOcean profile: EEP A5-10-03

High gloss pure white D 20.450.022 FU-RTR 00313706

aluminium D 20.450.702 FU-RTR 00313716

Easyclickpro room temperature sensor with solar energy accumulator, with setpoint and presence button

For recording temperature and local setpoint adjustment when using individual room controllers, with integrated temperature sensor, setpoint adjuster and presence button. The room temper-ature sensor transmits the measurement values to receivers and gateways for the NOVA range of switches with no need for a battery.Optional: Backup battery CR1632EnOcean profile: EEP A5-10-05

High gloss pure white D 20.450.022 FU-RTR PT 00313766

aluminium D 20.450.702 FU-RTR PT 00313776

Solar room sensor – temperature and air humidity

Surface-mounted room control devices with wireless system for temperature and humidity measurement.Optional: Backup battery LS14250EnOcean profile: EEP A5-04-01

white SR04 rH 00331666

Solar room sensor – temperature and air humidity

Surface-mounted room control devices with wireless system for temperature measurement and setpoint adjuster.Optional: Backup battery LS14250 EnOcean profile: EEP A5-10-12

pure white SR04P rH 00331676

Room sensor – temperature and CO₂

Surface-mounted room control devices with wireless system for temperature measurement and CO2.Requires 24 V power supply EnOcean profile: EEP A5-09-04

pure white SR04 CO2 00331686

Solar room sensor – temperature

Surface-mounted room control devices with wireless system for temperature measurement and setpoint adjuster, switch for fan levels (Auto, 0, I, II, III) and presence button.Optional: Backup battery LS14250 EnOcean profile: EEP A5-10-01

white SR04PST 00331646

EnOcean | PEHA Easyclickpro thermostat


13

Thanos room control devices

Thanos room control devices in two versions

The Thanos touch room control device is used to record the temperature and humidity (optional) and for the integrated operation of HVAC, lighting and shades in individual room control systems. With its high-quality appearance, the device is particularly suitable for design-oriented premises. The control functions can be used flexibly depending on the room requirements.

Highest design and technological standards for room control: the high-end Thanos room control device.

Touch room control device

With temperature sensor, humidity and sensor buttons, 230 V, vertical installation

white THANOS SR rH L white Mvolt 00331526

black THANOS SR rH L black Mvolt 00331536

Ditto, but for horizontal installation white THANOS SR rH LQ white Mvolt 00331546

black THANOS SR rH LQ black Mvolt 00331556

Touch room control device – small version

With temperature sensor, humidity, 230 V, vertical installation

white THANOS SR rH S white Mvolt 00331566

black THANOS SR rH S black Mvolt 00331576

Ditto, but for horizontal installation white THANOS SR rH SQ white Mvolt 00331586

black THANOS SR rH SQ black Mvolt 00331596

EnOcean | Room control device


14 EnOcean | Actuators

Easyclickpro actuator, with battery

With the battery-powered bidirectional Easyclickpro actuator, convenient individual room control can be achieved using a radiator heating system. The actuator is taught for the switching module via a button/LED. Includes three batteries (AA)

D 451 FU-E MSA2 00324867


Wireless technology EnOcean (IEC 14543-3-10)

Frequency 868 MHz

Data transmission Bidirectional

EnOcean profile EEP A5-20-01

Power supply Battery-driven, three alkaline mignon batter-ies (AA)

Temperature measuring range

0 … 40 °C

Temperature accuracy ± 0.5 °C (typ. at 25 °C)

Measuring interval Every 2 … 20 mins, adjustable

Transmission interval Every 2 … 20 mins, adjustable

Display Status LED, multi-coloured

Housing RAL 9010, pure white

Protection class IP40 in accordance with DIN EN 60529

Ambient conditions 0 … 50 °C

Weight 157 g without batteries, 225 g with batteries

Installation Installation position ± 90°

Adjustment noise < 28 dB(A)

Adjustment stroke Up to 3 mm

Adjustment time Up to 10 s/mm

Adjustment force 100 N nominal

Status display Stroke scale

Connection for valves M30 x 1.5

Dimensions 91.5 × 85 × 47 mm

Easyclickpro actuator

Easyclickpro actuator, without battery NEW!

With the bidirectional Easyclickpro actuator, convenient individual room control can be achieved using a radiator heating system. The actuator has no battery and gets the electrical energy it needs to operate from the hot water in the heating system. The internal energy accumulator ensures that the actuator can continue operating even when no hot water is available. The actuator is taught for the switching module via a button/LED.

D 451 FU-E MSA3 00324886


Power supply Thermal energy harvesting, micro USB connection (type B)

Wireless technology EnOcean (IEC 14543-3-10)

Transmission frequency 868 MHz

Transmission power <10 mW

Data transmission Bidirectional

EnOcean profile EEP A5-20-01

Display Status LED

Measuring range 0 … 40 °C

Adjustment travel >3.8 mm

Adjustment speed Approx. 0.24 mm/s

Holding force Max. >100 N

Operating temperature 0 … 40 °C 70 % rh

Transport and storage temperature

–20 … 65 °C 70 % rh

Protection class IP40 in accordance with DIN EN 60529

Measuring interval 10 min. (measuring interval = transmission interval)

Housing PC, aluminium, pure white

Installation Connection for valves M30 × 1.5

Dimensions L × H × W 80.4 mm × 63 mm × 62 mm

Weight 240 g

Item No. Order No.

15EnOcean | Sensors

Other EnOcean sensors

Easyclick window contact

Battery-free wireless window/door contact for monitoring the status of doors and windows with Easyclick wireless signals via Easyclick Plus receivers, bidirectional and wireless interfaces for building system technology. The Easyclick window contact is wireless and completely maintenance free, with an internal solar-powered energy accumulator. It can be used across several days in darkness. The signal is transmitted immediately as soon as a window is opened or closed and is triggered by a window magnet. Window contact dimensions: L 110 × W 19 × H 15 mm / Magnet dimensions: L 23 × W 14 × H 6 mmPower supply: Solar-powered energy accumulator for artificial light, (CR1225 battery can optionally be used)

white D 450 FU FK 00367113

Easyclickpro outdoor brightness sensor

For automatically controlling shades, can also be used as a twilight switch

Technical information: Technology: EnOcean (IEC 14543-3-10)Frequency: 868 MHzMeasured variable: LightPower supply: Solar cell, internal supercap, maintenance free, optional: Backup battery LS14250Measuring range: 0 … 510 lux, 0 … 1000 lux (10 bit), 0 … 1020 lux, 300 … 30000 lux (standard), 600 … 60000 lux EnOcean EEP: A5-06-01 (300 … 30000, 60 .. 60000 lux), A5-06-02 (0 … 510, 0 … 1020 lux), A5-06-03 (10 bit, 0 … 1000 lux) Housing: PA6, pure white; Lid: PC, transparent Protection class: IP65 in accordance with DIN EN 60529 Ambient conditions: –20 … 70 °C, max. 85% rh, non-condensing Weight: 120 g

pure white D SR65 LI 00365506

Easyclickpro ceiling motion sensor

The wireless Easyclick ceiling motion sensor is powered by solar cells and detects motion using a 360° passive infra-red sensor. The motion sensor is easy to install and saves energy. The lights will automatically switch ON when a person enters a room and OFF when they leave, following a delay. The motion sensor sends radio signals to all EnOcean interfaces for building systems technology. Battery operation (CR2032) is possible at a brightness of < 50 lux.

pearl white D 451 FU-BM DE 00317316

Easyclickpro wall-mounted motion sensor

The wireless Easyclick wall-mounted motion sensor is powered by solar cells and detects motion using a passive infra-red sensor. The motion sensor is easy to install and saves energy. The lights will automatically switch ON when a person enters a room and OFF when they leave, following a delay. The motion sensor sends radio signals to all EnOcean interfaces for building systems technology. Battery operation (CR2032) is possible at a brightness of < 50 lux. Switching between the standard wide-angle lens and the accompanying long-distance lens is easy.

pearl white D 451 FU-BM 00317416

Easyclick mini hand-held transmitter, 4-channel

The Easyclick mini hand-held transmitter is suitable for switching and dimming lighting, moving shutters up and down and adjusting the slats on blinds. It can be operated without batteries and at any location. This allows users to open the garage door when coming home and activate the welcome scene. The small and ergonomic mini hand-held transmitter comes in an enclosed housing. It is designed as a remote controller and has 4 buttons. In the 2-button version, the buttons A/B and C/D are paired.

Black housing, grey buttons, weight approx. 50 g, dimensions in mm: W 50 × L 82 × H 21

black/grey D 450 FU-HS 4 00364113


CentraLineHoneywell GmbHBöblinger Straße 1771101 Schönaich, GermanyTel +49 (0) 7031 637 01www.centraline.com

Subject to change without notice. © 2019 Honeywell International Inc. EN3Z-0947GE51 R0819

flexible room solutions with enocean · shades thermostats sensors. a perfect partnership ... place...

Documents