floating xf system for podiumwaterproffing
TRANSCRIPT
Floating XF system is THE
ANSWER
1. Thorough cleaning using Grinder / Scrubber and Blower
(we suggest to grind the surface)
2. Application of XF primer to top surface of mother slab to make it dustproof.
3. Laying of XF film on the slab as per designed layout with XF tape on the slab & film, film & film, film & wall
4. Fixing XF film on column offsets as per fabrication details with XF tape
Floor piece first
XF tapes on all ends of
floor piece
Wall piece over floor
piece
XF tapes on all ends of
wall piece
4. Fixing XF film near down take pipes as per fabrication details
4. Fixing XF film on at rainwater outlets as per fabrication details
5. Application of XF Bond on XF film and XF tape
Laying of mortar & placing wearing course (tiles / Tremix / Interlocking blocks) to the desired slope
Laying of mortar & placing wearing course (tiles / Tremix / Interlocking blocks) to the desired slope
7. Finishing the up stands with XF coat (close view)
7. Finishing the up stands with XF coat
FLOATING XF SYSTEM SIT – ON SYSTEMS
1. Cost effective 1. Expensive
2. Has longer life since XF film does not decay / disintegrate
2. Less durable
3. Less chances of failure (failure occurs only due to human negligence)
3. High chances of failure since system crackswhen mother slab cracks.
4. No curing is required 4. Curing is required.
5. Execution is very fast. 5. Takes lot of time.
6. Satisfactory and long lasting results. 6. Unsatisfactory results.
Since XF film is a comparatively delicate material following precautions have to be observed during execution.
1. The surface of mother slab has to be smooth free of anypiercing outcrop of aggregates / binding wire & steel(we suggest to grind the surface)
3. After the film is laid, see that no stray animals runor walk over it.
2. No one should walk over the film with footwear.
4. No one should smoke in the work area, includingengineers and owners
5. While laying the wearing course, the movement ofworkers has to be over packaging foam planks.
6. The wearing course material should not bedumped on the film
7. In case, any hole or damage to the film isobserved, do not hide it, it can be repaired (stitchin time saves nine)
Pebbles (Rainbow Housing) – Bavdhan.
Forest County (Clover – Vascon JV) – Kharadi.
Amrutwel (Riswadkar Associates) - Warje.
Aureli (Acme Landmarks) – Ambegaon.
Kimaya ( Pate Developers) – Bibewadi.
Site visit ( Essential ).
Technical Specifications and Support.
System design.
Provision of trained applicator anywhere in the country.
Supply of components of the system.
Turn key execution including all above.