flowmatic - swing check valve
TRANSCRIPT
-
8/18/2019 Flowmatic - Swing Check Valve
1/4
Swing Check Valve745 Flo-Flex®
Model 745
Model 745 BF
Model 745 PI
Model 745 BFPI
Model 745LS
Industrial and Municipal Applications
Flomatic Valves High Quality Valves Built to La
High Quality Valves Built to Last…
-
8/18/2019 Flowmatic - Swing Check Valve
2/4
Model 745 is a proven member of the growing Flo-Flex® family of our rubber disc swing
check valves. Flo-Flex® provides the water and wastewater industry one of the broadest line
of rubber flexible disc swing checks available on the market today. The flange to flange lay
length is according to ANSI / AWWA C508-01. Size Range: 2” thru 24” sizing
745- 45° Seat Flo-Flex®, Swing Check Valve Epoxy coated Ductile Iron Body, 125/150# Flanged,ANSI/AWWA C508, Buna-N coated steel disc.
Temp Max: 140°F (60C)Pressure Max: 250 PSI
745 WITH POSITION INDICATOR- 45˚Seat Flo-Flex®,Swing Check Valve Epoxy coated Ductile Iron Body,150/125# Flanged, ANSI/AWWA C508,Buna-N coated steel disc.
Temp Max: 140°F (60C)Pressure Max: 250 PSI
745 WITH BACKFLUSH DEVICE- 45˚ Seat Flo-Flex®,Swing Check Valve Epoxy coated Ductile Iron Body,150/125# Flanged, ANSI/AWWA C508, Buna-N coatedsteel disc.
Temp Max: 140°F (60C)
Pressure Max: 250 PSI
745 WITH POSITION INDICATOR AND BACKFLUSH
DEVICE- 45˚ Seat Flo-Flex®, Swing Check Valve Epoxy coated Ductile Iron Body, 150/125# Flanged,ANSI/AWWA C508, Buna-N coated steel disc.
Temp Max: 140°F (60C)
Pressure Max: 250 PSI
Flo-Flex
Flo-Flex® Model 745 Swing Check Valve
Industrial and Municipal Applications
When a tight seal is critical.
Minimize system pressure drop.
Ideal In systems where flow is constant.
When horizontal or vertical line installation is required.
Where In-line maintenance is a must.Flomatic Valves
High Quality Valves Built to Last...
745 745PI
745BF 745BFPI
w w w . f l o m
a t i c . c o m
1 -
8 0 0 -
8 3
3 -
2 0 4 0
F l o -
F l e x®
M o d e l 7 4 5
F l o -
F l e x®
M o d e l 7 4 5
Flex®
-
8/18/2019 Flowmatic - Swing Check Valve
3/4
Fusion epoxy coated inside/outside
Flange to flange dimension according toAWWA C508-01
The 45o angle valve seat
Low head loss
Long rubber disc life
Easy in-line serviceability
Can be installed in vertical up flow orhorizontal direction
Precision molded valve disc of one piececonstruction, integral “o”-ring type sealing
Can be used as pipe line clean-out
Valve body flow area equal to nominalpipe area
Reinforced steel/ductile iron valve disc
Optional: • backflow device
• disc position indicator• proximity switch model 745PS• stainless steel bolts
Optional disc position indicator
Model745 BFOptional backflow device
Optional backflow device & disc position indicator
Model 745 BFPI
Features / Benefits
H E A V Y D U T Y 7 4 5
H E A V Y D U T Y 7 4 5
Installed by the factory or in the field
the disc position indicator provides avisual indication of the disc locationduring operation or shut down. The745’s top cover is drilled and tappedfor installation of the indicator.
The new 745BF swing checkprovides a drilled and tappedlocation at the bottom of the valvefor installation of a backflow device.Manually operated, this actuator is usedwhen backflow, pump priming, linedraining or system tests are required.This option can be factory installed or
added in the field.
The new 745BFPI swing checkprovides both of the above options.Each device can be installed at the time
of purchase or added to the valve in thefield. A proximity switch is available uponorder of the Model 745PS (not pictured).
Flo-Flex
Flomatic Valves
High Quality Valves Built to Last...
Model 745 PI
Model 745 LSThe 745LS swing check valve provides an adjustablelimit switch option for pump operation.
-
8/18/2019 Flowmatic - Swing Check Valve
4/4
Flomatic Corporation
15 Pruyn’s Island Drive
Glens Falls, NY 12801-4421
Telephone: 1-(800)-833-2040 Direct Telephone: 1-(518)-761-9797
Fax: 1-(800)-314-3155 Direct Fax: 1-(518)-761-9798
www.flomatic.com
w w w . f l o m
a t i c . c o m
1 -
8 0 0 -
8 3
3 -
2 0 4 0
F l o -
F l e x®
M o d e l 7 4 5
F l o -
F l e x®
M o d e l 7 4 5
Item # Qty Description Material ASTM
1 1 Body Ductile Iron A536
2 1 Cover Ductile Iron A536
3 1 *Disc Buna coated steel -------
4 1 Gasket Rubber -------
5 A/R Cover Bolt Steel SAE Grade 5
6 1 Plug Malleable Iron -------
SizeInch
Part#
AInch
BInch
CInch
Weightlbs.
2” 2380 8” 33 / 8” 6” 27
21 / 2” 2381 81 / 2” 33 / 8” 7” 35
3” 2382 91 / 2” 37 / 8” 7 1 / 2” 40
4” 2383 111 / 2” 45 / 8” 9” 68
5” 2384 13 3 / 4” 51 / 8” 10” 105
6” 2385 15” 57 / 8” 11” 128
8” 2386 191 / 2” 7 5 / 8” 131 / 2” 235
SizeInch
Part#
AInch
BInch
CInch
Weightlbs.
10” 2387 241 / 2” 97 / 8” 16” 380
12” 2388 271 / 2” 113 / 8” 19” 620
14” 2390 31” 133 / 8” 21” 740
16” 2391 32” 153 / 8” 231 / 2” 1035
18” 2392 36” 171 / 8” 25” 1540
20” 2393 40” 191 / 8” 271 / 2” 1835
24” 2394 48” 223 / 4” 32” 2475
*Optional EPDM or Viton Coated Steel
FLOW RATE (GPM)
Model 78Size range: 21 /2” - 14”
Cast iron body. Epoxy coating.Flanged ANSI125 connection.Reinforced rubber swing disc.Inline serviceable.
Model 78ASize range: 3” - 14”
Ductile iron angle body with epoxycoating. Flanged connection ANSI125. Reinforced rubber swing disc.In-line serviceable.
Model90CS/92CSSize range: 2”-30”
Same construction as 90/92.Features external lever and weightand sealed end cushion closuresystem for adjustable rate of valveclosure.
Model 408Size range: 3” - 14”
Cast iron body with epoxycoating and access port,flanged connection ANSI 125.NITRILE (Buna-N) coveredmetal ball. “Sinking Type”.
Other Flomatic Valves
© Copyright 2012 by Flomatic #Y745 7/2014 2M
Flo-Flex®