flushing oil - southern lubricants
TRANSCRIPT
FM 10665
Flushing Oil
Flushing oil is made from the finest straight paraffinic base stocks to produce an oil complying with BS 4475:1992.
Features
Using Flushing oil can increase oil life by ensuring that all engine parts are left clean and free from used engine oil deposits ready for fresh oil.
Directions For Use
Run engine to warm oil.Drain used engine oil.Refill engine with Flushing Oil.Run engine at idle for a approximately 5 mins.Drain Flushing Oil. Change oil filter.Refill with new engine oil.
Typical Physical Characteristics
Density @ 15°C 0.865Viscosity @ 40°C 21.3 cStViscosity @ 100°C 4.2 cStViscosity index 99Flash point 150 °CPour point - 9 °CTotal acidity 0.2 mgKOH / gInorganic acidity 0.01 mgKOH / gProduct Code 14080
Rev:C/10
Rock Oil, 90 Priestley Street, Warrington, Cheshire WA5 1STTel: 00 44 (0) 1925 636191 Fax: 00 44 (0) 1925 632499Web: www.rockoil.com email:[email protected]