flushing systems - enware.com.au · when tested in accordance with standard as/nzs 6400 for more...
TRANSCRIPT
SMART CHOICES FOR HYGIENEAND WATER EFFICIENCY
BUILT IN VANDAL RESISTANCE
• ToiletFlushingSystems
• UrinalFlushingSystems
flushingsystems
13
00
36
9 2
73
| WW
W.E
NW
AR
E.C
OM
.AU
252Product details in this guide are indicative only and may change without notice.
ENWARE | TOILET FLUSHING SYSTEMS
toilet flushing systems
Neat and reliable WC flushing solutions for demanding applications using piezo electric technology.
Enware’s flushing solutions are a smart choice for hygiene and water efficiency — Using the latest technological advances including a variety of functional options. With robust piezo operation and mains power it is ideal for demanding applications such as public washrooms, sports grounds, aquatic centres or aged care facilities. Designed to allow for full access to the flushing components whilst still incorporating a high level of tamper-proof security.
Robust piezo operation Isolation valve included Vandal resistant torx screws ATS5200.020 Compliant Low maintenance Integral inlet strainer and air break No cistern fill time
Enware touch activated flushing systems come with varying WELS water efficiency ratings.
Dual Flush systems have the choice of 3 or 4 Star WELS ratings
Single flush systems have a 1 Star WELS rating
Enware products are to be installed in accordance with AS/NZS3500.
RELATED PRODUCTSUrinal Flushing — Page 255 Sanitary Ware — Page 329 Electronic Touch Button and Sensor Tapware — Page 239
public washrooms
sporting grounds
aquatic centres
aged care
shopping centres
A joint government and industry programLicence No. 0058
The morestars the morewater efficient
litres per full flush6
litres per half flush3
When tested in accordance with Standard AS/NZS 6400For more information and to compare
products, refer to:
www.waterrating.gov.au
3.8 litres per average flush
WATERRATING
A joint government and industry programLicence No. 0058
The morestars the morewater efficient
litres per full flush4.5
litres per half flush3
When tested in accordance with Standard AS/NZS 6400For more information and to compare
products, refer to:
www.waterrating.gov.au
3.1 litres per average flush
WATERRATING
ATS 5200.020C of C 40116Global-Mark
Connection:Inlet - 1" BSP (25mm)Outlet - 1½" BSP (40mm)
Minimum Water Supply Line Size:
1" (25mm) copper pipe
Mains Powered: 24V AC Transformer
Kv Factor: 8.3m3/h
Flush Pipe:
700mm (+/- 100mm) of 1 ½" (40mm) flush pipe is required below the air break. (Note: use a maximum of 1x90º bend is to be used in the flush pipe. 45º bends are preferred. For installation outside of this parameter please contact your Enware representative.
SINGLE FLUSH DUAL FLUSH
Water Supply Working Pressure: 250kPa*Pan: 5.5L Capacity (1 Star)
Water Supply Working Pressure: 300kPa*Pan: 6/3L Capacity (3 Star): 4.5/3L Capacity (4 Star)
technical informationwater efficiency
253
flus
hing
sys
tem
s
ENWARE | TOILET FLUSHING SYSTEMS
H
Utility/WC Flushing System with Touch Activation — Single Flush Duct AccessEMF400M—1 Mains Powered — 1 Star WELS rating
Utility/WC Flushing System with Touch Activation — Single Flush Front AccessEMF401M-1 Mains Powered — 1 Star WELS rating
WC Flushing System with Touch Activation — Dual Flush Front AccessEMF411M-3 Mains Powered — 3 Star WELS rating
EMF411M-4 Mains Powered — 4 Star WELS rating
Spare Parts For WC Flushing SystemsEMFS301 Electronic Flushing Piezo — Half Flush
EMFS302 Electronic Flushing Piezo — Full Flush
EMFS303 Solenoid Valve 3/4" BSP F-F 2AV AC
EMFS305 Y-Strainer with Ball Valve 3/4" BSP F-F
EMFS306 Olive Rubber to suit 40mm Flush Pipe
EMFS307 Piezo Spade Connector for Piezo Dual Flush System
EMFS308 Filter to suit 3/4" BSP Y-Strainer with Ball Valve
EMDS800 Transformer 24V AC with 1.8m lead
EMDS801 2m Extension for power pack
(305
)20
(145)
77
230(BRACKET DIM)
350
(BRA
CKET
DIM
)
3/4" BSP
1" BSP (MALE)
67 58
57
40
AIR BREAKDN40 FORFLUSH PIPE
(305
)20
93
(REF
)
155 (REF)
75
125
55(B
RACK
ET D
IM)
110(BRACKET DIM)
3/4" BSP
1" BSP (MALE)
67
58
57
40
AIR BREAKDN40 FORFLUSH PIPE
82
(305
)20
(145) 250
370
AIR BREAKDN40 FORFLUSH PIPE
3/4" BSP
1" BSP (MALE)
80
55
55
40
13
00
36
9 2
73
| WW
W.E
NW
AR
E.C
OM
.AU
254Product details in this guide are indicative only and may change without notice.
ENWARE | URINAL FLUSHING SYSTEMS
WC Flushing System with Touch Activation — Dual Flush Rear AccessEMF410M-3 Mains Powered — 3 Star WELS rating
EMF410M-4 Mains Powered — 4 Star WELS rating
WC Dual Flush Duct With Extended TailEMF412M-3 3 Stars WELS Rating
EMF412M-4 4 Stars WELS Rating
82
(305
)20
(145)
170
120
3/4" BSP
1" BSP (MALE)
67
55
55
(17
6 M
AX)
AIR BREAKDN40 FORFLUSH PIPE
(305
)
(145)
82
20
125
75
55(B
RACK
ET D
IM)
110(BRACKET DIM)
3/4" BSP
1" BSP (MALE)
67
55
55
40
AIR BREAKDN40 FORFLUSH PIPE
255
flus
hing
sys
tem
s
ENWARE | URINAL FLUSHING SYSTEMS
Using the latest hands-free and touch button technology with built in functional options designed to achieve optimum hygiene and water efficiency.
Ideal for demanding applications such as commercial, industrial and institutional applications including washrooms, medical facilities, shopping centres and schools. Designed to minimise excessive water use, reduce maintenance and maximise hygiene in public and other frequently used urinals — whilst still incorporating tamper-proof security.
All models have been designed to achieve optimum water efficiency by having water delivered only as required after use, or on an programmed basis.
*350kPa required to achieve WELS rating on these models.
touch button activation
Robust piezo operation Semi concealed installation Vandal resistant 30mm touch button Isolation valve and filter included Mains power 24V Optional sentinel flushing 12 or 24 hours request when ordering Large face plate option for front access Small GPO style face plate or button style for duct access
*For ATS5200.020 compliance air break EMFS10 must be used
ATS 5200.020 Cof C 40116 Global-Mark
ATS5200.030 CofC 60042 AGA
TOUCH BUTTONSYSTEMS
Water Supply Pressure: 350kPa (operational) To ensure that the unit works correctly, it is important to ensure that the site and location of installation meets the hydraulic requirements of AS/NZS 3500.1. Also there must be:• Minimum 20mm copper supply line for 1 stall or up to 450mm
wall space. 600mm of wall space may require 25mm supply• Minimum 200kPa for valve to operate NOTE: WELS Flush
Volume only achieved at 350kPa• No more than 1 valve per urinal OR 600mm wall space• Flush valve must be no more than 2m above ground level• Flush valve should be installed min 300mm above wall hung
urinals and 450mm above continuous wall urinals* For ATS5200.020 compliance air break EMFS10 must be used
Minimum Water Supply Line Size: ¾" (20mm) copper pipe
Mains Powered: 24V AC Transformer
Kv Factor: 0.42 Kv
Connection: ½" BSP (15mm)
commercial, industrial & institutional washrooms
medical facilities
shopping centres
schools
urinal flushing systems
technical information
water efficiency
H
13
00
36
9 2
73
| WW
W.E
NW
AR
E.C
OM
.AU
256Product details in this guide are indicative only and may change without notice.
ENWARE | URINAL FLUSHING SYSTEMS
hands free sensor activated
Concealed ceiling or wall installation for a quick, neat and vandal resistant finish
Microwave movement sensor, detects through most low to medium density building materials*
Easy to adjust sensor beam can be customised to suit your application
Flushes 50 seconds after user movement is detected Sensor deactivates for 20 seconds to minimise
water wastage Air break included WELS 3 Star (2 Litres/flush) water efficiency rating
Detector & Control Module
CEILING
Power Point
URINAL
Flush PipeØ 1000 x 40mm
Air BreakValve
SolenoidValve
Stop Valve
1
2
3
4
5
6
7
Stop Valve
Solenoid Valve and Air Break Valve
Flush Pipe 1m of 1½" (40mm) flush pipe is required below the air break**
Urinal
Ceiling
Detector & Control Module
Power Point
ATS 5200.020 Cof C 40116 Global-Mark
ATS5200.030 CofC 60042 AGA
*The microwave movement sensor can detect through most low to medium density building materials such as plaster, fibre board and some light masonites, but not metal. Each material affects the beam strength, which can be adjusted on site to suit the application. Unobstructed the beam ranges from approximately 70cm (deep) x 50cm (wide) up to 3m x 3m in a teardrop shape.
**Note: use 1x90o bend after solenoid.
OrderCode:
EMF303M-3
MainsPowered
1
2
3
4
5
67
Minimum Water Supply Line Size: ¾" (20mm)
Mains Powered: 24V AC Transformer
Water Supply Pressure: 350kPa
Connection: Inlet ½" BSP (15mm)
Refer to TDS (available at www.enware.com.au) for specific requirements concerning site and installation requirements. Enware products are to be installed in accordance with AS/NZS3500.
technical informationwater efficiency
257
flus
hing
sys
tem
s
ENWARE | URINAL FLUSHING SYSTEMS
sensor activated urinal with inbuilt flushing
Water Supply Pressure: 50-500kPa Max (PCA)*
Water Inlet Size: ½" flexible hose connection
Battery Powered: 6V - 4x AA 1.5V batteries
Volume per flush: 0.8 litre (incl. pre and post flush)
*Enware products are to be installed in accordance with AS/NZS3500.
IFO 0.8 SENSOR URINAL
A porcelain urinal with a hygienic integrated sensor activated flushing system.
Consumes only 0.8 L/flush including pre and post flush Pre flush; a small dose of water wets the bowl, activation
delay of 2 seconds Post flush activated 2 seconds after user has moved
away from urinal Smart ‘Stadium Mode’ recognises frequent use and
switches to one post flush every 3 minutes. Returns to ‘Normal Mode’ after 1 minute of non-use
Battery-operated flush system with 4 easily replaceable AA 6V batteries
40mm adjustable bottle trap included Automatic hygiene flush after 24 hrs of no activity
to maintain water/odour seal No need for electrical wiring or a cistern Optional anti-vandal cover
170
230
710
315
85420380
1/2 "BSP
Ø 26
340
405356
100650
474
45
10894
Sensoreye
AS/NZS 3982 ATS 5200.020 WMKA 22087
OrderCode:
IFO4134Sensorurinalwithbackinlet
RELATED PRODUCTSToilet (WC) Flushing — Page 252 Sanitary Ware — Page 329 Electronic Touch Button and Sensor Tapware — Page 239
technical information
water efficiency
H
13
00
36
9 2
73
| WW
W.E
NW
AR
E.C
OM
.AU
258Product details in this guide are indicative only and may change without notice.
ENWARE | URINAL FLUSHING SYSTEMS
AIR BREAK MUST BE INSTALLED VERTICALLY
60
95
(95
REF)
1/2" FEMALE
25MM SPARGE PIPEAIR BREAK
156
200 REF
55
90
60
130
REF
Urinal Flushing System with Microwave SensorEMF303M-3 3 Stars WELS Rating
Urinal Flushing System with Touch Activation — Rear AccessEMF304M-3 3 Star WELS rating
Urinal Flushing System with Touch Activation — Slim Button StyleEMF305M-3 3 Star WELS rating
Urinal Flushing System with Touch Activation — Front AccessEMF307M-3 3 Star WELS rating
Spare Parts For EMF300 Urinal Flushing SystemsEMFS10 Vacuum Breaker to Suit Urinal Flushing
EMFS300 Electronic Flushing Piezo — Urinal
EMFS304 Ball Valve 1/2" BSP M-F DR Brass
Spare Parts For EMF303 Microwave Sensor Flushing System OnlyEMFS805 Spare Part — Transformer — Suits EMF303 only
EMFS819 Spare Part — Microwave Sensor Only — to suit EMF303
40 50 57
95 (REF)1/2” FEMALE
58
77
1/2” BSP MALE
125
75
110(BRACKET DIM) 55
(BRA
CKET
DIM
)
190
(REF
)
185 (
REF)
77
58
95 (REF)
150
280
1/2" BSP MALE
1/2" FEMALE
5750
40
120
40
30C/
C
110 C/C
Ø5TYPØ 50
58
77185(
REF)
30
CUT OUT IN WALL
95 (REF)
1/2" FEMALE
1/2" BSP MALE
175M
AX
4847
120
40
30C/
C
110 C/C
Ø5TYPØ 50
58
77185(
REF)
30
CUT OUT IN WALL
95 (REF)
1/2" FEMALE
1/2" BSP MALE
175M
AX
4847
185 (
REF)
77
58
95 (REF)
150
280
1/2" BSP MALE
1/2" FEMALE
5750
40
40 50 57
95 (REF)1/2” FEMALE
58
77
1/2” BSP MALE
125
75
110(BRACKET DIM) 55
(BRA
CKET
DIM
)
190
(REF
)