PureShield, Inc.

Protecting The World From &

Bacteria Microorganisms

BIO-PROTECT 500Bio-Protect 500 is a microbiostatic non-leaching, non-poisonous antimicrobial surface protectant. This unique product is EPA Registered as non-toxic and non hazardous and USDA accepted for food contact surfaces. Bio-Protect 500 is an easily applied liquid concentrate that proactively protects virtually all solid surfaces and fabrics from a broad array of bacteria and microorganisms and inhibits them from growing. In addition, since Bio-Protect 500 does not off gas a poison like traditional anti-microbials, the treated surface is protected for up to 90 days. The primary goal of Bio-Protect 500 is to reduce the spread of germs, which are the root cause of infections and are the number one cause of death worldwide.

We want to help control the spread of germs by protecting all the surfaces we touch.

BIO-PROTECT500

Protecting The World From

B A C T E R I A

PureShield, Inc.

The Product:

In Healthcare environments, it is important to understand the fundamental differences between surface

protection and disinfection. In addition. The use of Bio-Protect 500 is not meant to replace current protocols.

Instead, the use of Bio-Protect 500 will greatly enhance traditional cleaning methods.

With most disinfectants, a ten-minute dwell time on a surface will render most microbes inactive. Unfortunately,

disinfectants fall into the category of non-bound technologies. In other words they off-gas poisons to be effective

against microbes. By doing this they in effect “give themselves up” and on total evaporation leave little if any

residual benefits…dry surface = zero kill.

Here is where Bio-Protect 500, surface protectant excels. Through the process of splicing Silane and Organo

molecules, this combination yields a very efficacious surface treatment. This splicing allows the best properties of a

disinfectant to continue working on the surface for up to ninety days. In effect, any surface treated with Bio-

Protect 500 will have long-term protection. Since the Mode of Action is micro-biostatic nature, it is equally

effective on all surfaces. This includes both porous and non-porous surfaces. This is another benefit since most

disinfectants are only approved for hard, non-porous surfaces.

Bio-Protect 500 is a patented and Environmental

Protection Agency (EPA) registered product. It’s

Microbiostatic Antimicrobial Coating prevents the growth

of a wide array of bacteria, mold, mildew, fungus, algae, and

yeast. It acts like a bed of microscopic spikes that pierce the

cell walls to destroy and kill microbes offering a totally new

approach to providing long-lasting antimicrobial protection.

One end of the Bio-Protect 500 molecule creates a strong

bond with a multitude of surfaces, both porous and

nonporous, forming a highly durable protective coating.

The other end of the molecule forms a microscopic bed of

spikes that puncture microbes like a bed of nails. The Bio-

Protect 500 Microbiostatic Antimicrobial Coating physically

ruptures the cell walls of these microbes, without the use of

poisons. Since the Bio-Protect 500 Microbiostatic

Antimicrobial Coating methodology is mechanical instead

of a poison, it does not create “superbugs,” which are

microbes that build up a resistance to treatment.

How it Works

Over 30 years of research and development went in to the

creation of the Bio-Protect 500 Microbiostatic

Antimicrobial Coating. The technology has undergone

extensive independent laboratory testing and has a long

history of safe use. It is registered with the EPA for all

applications in which it is used.

All antimicrobials are not created equal. It’s important to

understand the basic chemical, physical, and biological

properties of an antimicrobial so the best choice can be

made. Because of its unique mode of action and inability to

migrate from a treated surface, our technology is the best

choice to minimize environmental contamination and the

development of resistant organisms.

Our EPA approved products are safe for the environment,

humans, and pets. They are non-dissipating, non-leaching,

non-migrating from the applied substrate and cannot be

absorbed by micro-organisms or by humans.

Overhead view of BP 500 spikes (image © 2010 IDA)

Surface Protection Disinfectionvs.

H o s p i t a l s

Everywhere, billions ofharmful mico-organismare making our life prone to several diseases.Bio-Protect 500provides completePeace of Mind.

Hotel Rooms

Metro

In our terminologywe call it

which are most vulnerable.

.T O UCH POINTS

S c h o o l s

Approved for commercial or residential applications such as home, office,

automobiles, healthcare/hospital facilities, schools, public spaces/ public

transportation, hospitality venues, sports facilities, marine and fabrics, etc.

Usage:

5 Ltr. Container (Industrial Usage)

BIO-PROTECT

500

PureShield, Inc.

Protecting The World From

B A C T E R I A

BIO-PROTECT500

PureShield, Inc.

Protecting The World From B A C T E R I A

1 Ltr. Container (Domestic Refill Usage)

Handy Sprays (Easy to use)

Packaging:

Bio-Protect 500 can be easily used on our

Mobile Phones

TV -remotes

Laptops

Computers and

Keyboards

BIO-PROTECT500

PureShield, Inc.

Protecting The World From

B A C T E R I A

BIO-PROTECT500

PureShield, Inc.

Protecting The World From

B A C T E R I A

BIO-PROTECT

500

PureShield, Inc.

Protecting The World From

B A C T E R I A

Does coating give off gases during or after application?

No, it does not volatilize dissipate or leach onto other surfaces. It’s chemistry polymerizes where it is applied and forms a permanent bond that essentially lasts the life of the treated surface. Normal cleaning will not remove the treatment although it can be eventually abraded away.

How long will the treatment last?

Can the product be used on porous and non-porous surfaces?

Yes, it can be used on all surfaces both porous and non-porous. This is a tremendous advantage over disinfectants which by federal law are only approved for hard non-porous surfaces.

How is the product applied?

The water based product can be applied by trigger sprayer, pump up sprayer, back pack sprayer and fogging.

Is there regrowth after treatment?

Because of its unique chemistry, it provides long-term protection against regrowth and future contamination on treated surfaces. Porous surfaces, which are contaminated below the surface, will occasionally experience some growth that breaks through a treated surface.

What preparation is necessary prior to applying the treatment?

For best results, surfaces should be cleaned or scoured.

Are there any safety concerns after application is complete?

The unique properties permits near permanent bonding to any surface to which it is applied. Furthermore, this product will not give any gases, leach onto other surfaces or loose its strength over time. As long as the surface is kept clean with normal cleaning procedures, the surface will continue to fight any microbial growth.

Since the cured antimicrobial is non-volatile, insoluble and non-leaching, one treatment ideally lasts for 90 days on the treated surface. However, effective life of a treatment depends on other factors such as initial cleanliness, on-going cleaning practice etc, so re-application between 60 to 90 days is recommended. Independent testing has been conducted to verify effectiveness after 100 standard washes or cleaning processes on hard surfaces..

The manufacturer product by pad exhaust or over spray.

India: Bio-Protect Division,Taxila Technologies Pvt Ltd, (Official business partner and distributor of Pureshield Inc USA)

F-49 , Okhla Industrial Area, Phase-1, New Delhi -110 020Tel: 26816487, 26816489 E-mail: arunbhatnagar04@gmail.com(For Sales & Dealership Enquiries Contact: +91 9899099480)

USA: PureShield, Inc. Jupiter, Florida

C&D

: Spa

rsh

Com

mun

icat

ions

Active Ingredients:

FAQ:

What types of microorganisms does it work against?

It is effective against odor causing bacteria, mold and mildew.

Does this mean 1 don't have to clean my surfaces as much or as carefully?

No. The product provides continuous antimicrobial protection that protects the surfaces. However, normal cleaning practices should be maintained.

Does it begin working immediately?

It begins to work after it has dried and as soon as the microorganism come into contact with the protected surface. Under right conditions, microbes on an untreated surface can be doubled in every 20 minutes.

Active Ingredient:

Active Ingredient: 3-(trimethoxysilyl) 5%

propyldimethyloctadecyl ammonium chloride

Other Ingredients: 95%

Total Ingredients: 100%

PureShield, Inc.