»ford 351 w » kit tions cross-ram for 351 windsor cross-ram · 2019. 10. 4. · v8 kit, ford 351w...
TRANSCRIPT
Air Horns Machinedfrom 6061 Billet
Billet Capstan Linkage Kit(appearance may vary)
Fuel Injectors
8 Individual Cast Aluminum Runners
incorporating 50mm Throttles
Cast Aluminum Valley Plate with Integral
Vacuum Accumulator
Adjustable Fuel Pressure
Regulator
Throttle Position Sensor
High Volume -10 Fuel Rail Kitwith AN Fittings
OPTION PART #
High Pressure Fuel Pump Fuel Pump Fitting Kit
206259 203057
ECU Kit w/sensors & wiring harness On request
Idle Air Control 205039
OPTION PART #
Powder Coating of Throttle Bodies Powder Coating of Manifold
206298 206299
Polishing of Air HornsPolishing of Throttle Bodies Polishing of Manifold
206303206300 206301
MODEL DESCRIPTION PART #V8 Kit, Ford 351W Cross Ram, 60mm Air Horn 200064
AVAILABLE OPTIONS FOR THIS KIT — DETAILS ON RIGHT
BORLA® Induction presents a real cross-ram manifold for the Ford 351 Windsor small block engines fitted with 8 long runners for stump-pulling torque. Our valley plate incorporates a vacuum accumulator and its extended port wall construction enables machining for several different port configurations from OEM to 225’s. Boasting looks to die for and ground-shaking power, our Ford Cross-Ram kit was voted one of SEMA’s Best New Products for 2009.
»FORD 351 WCROSS-RAM
MADE IN THE USA in JOHNSON CITY, TN
V8
TH
RO
TTLE B
OD
Y K
ITS
The options shown below are available for the Throttle Body Kit featured on previous page. Call 1-877-GO BORLA for more details,or visit www.borlainduction.com. IMAGES SHOWN ARE REPRESENTATIVE AND MAY NOT MATCH KIT ON PREVIOUS PAGE.
»KIT OPTIONS
www.borlainduction.com
Enhance your engine bay even more with mirror-polished induction jewelry. Available for air horns, throttle bodies and the manifold. Creates a truly custom look.
Polished Finish
The choice of BORLA® engineers, Bosch premium competition-grade pumps meet the fuel delivery needs of high-performance racing engines. Fittings Kit also available.
High-Pressure Fuel Pump
Available for throttle bodies, the manifold, or both. Provides striking contrast that shows off the sophisticated components of your BORLA® Induction Throttle Body Kit.
Powder-Coated Finish
Featuring the latest in flash microprocessor technology for faster processing speeds. Engine-specific wiring harnesses simplify installations!
FAST ECU Kit
Provides the extra air needed to meet the demands power steering & air conditioning put on your engine. Also increases cold start RPM.
Idle Air Control
for 351 Windsor Cross-Ram
1-877-GO BORLA