fork extensions crepa-22
DESCRIPTION
BS ISO 13824TRANSCRIPT
QualityForkExtensionQ y ns made by VETTERy
The ideal solution for lifting loads which are much longer than thewhich are much longer than the existing fork.
Designed according to ISO 13284Designed according to ISO 13284 and CE guideline „Machines“ 89/392/EEU-IIA!
Available versions
Open version
Welded structure with an open lower side
Solid and cost-effective solution for the transport of loads which are distributed over the wholeare distributed over the whole
length of the extension
Closed version
Welded and extra solid box design with a closed lower side
Designed to lift also loads whichhave their centre of gravity
outside the length of the basicoutside the length of the basicfork
Demands of ISO 13284
Please observe:Please observe:
The existing fork must support at least Otherwise, technical clearance is neces,
LGV(max) =
The rated capacity of the fork extensionthe rated capacity and load centre of thseparately.
60 % of the fork extension length. ssary.y
= LGZ / 0,6
n is designed to suit the particular fork, he lift truck needs to be checked
Demands of ISO 13284
Please observe:Please observe:
Fork extensions need to be equipped woff. o
These looking bolts have to stand 50 %stability is necessary. y y
with locking bolts to prevent slipping
% of the defined test load, i.e. sufficient
Demands of ISO 13284
Further demands:Further demands:
• Minimum tolerance between fork extemaximum 10 % play are allowed. % p y
• Fork extension has to comply with all
Endurance testedMinimum 1,000,000 stress cycles with 25 % overload without failures
ension and the particular fork is 10mm,
demands of ISO 2330, i.e.
Safety factor 3:1Tested with 300 % of the rated capacity without faillures
Demands of ISO 13284 / CE
•The scope of supply has to include deThe scope of supply has to include de
• Type plate needs to be mounted
certification
tailed operating instructionstailed operating instructions
Advantages QualityForkExteng y
Advantage 1:
Solid welded box design (no bent profilSafe and stable positioning onto
nsions
e)o the fork
Advantages QualityForkExteng y
Advantage 2:
Individual adaptation to the cross-sectioTight tolerances, noise reductio
nsions
on of the existing forkn and optimized overall dimensions
Advantages QualityForkExteng y
Advantage 3:
Tip of the extension tapered and chamfRapid and convenient loading of
nsions
fered on the sides and undersidef pallets etc.
Advantages QualityForkExteng y
Advantage 4:
Made of solid, strong sheet metal. For static reasons, the lateral sheets ar
Maximum strengthMaximum strength
nsions
re extra thick.
Advantages QualityForkExteng y
Advantage 5:
In the standard version equipped with lto prevent slipping off
nsions
ocking bolts
Order information
Information to be indicated when ordering
• Open or closed version?
• Cross-section of the existing fork (width x th
R i d t t l l th f th t i (L )?• Required total length of the extension (LGV)?
• Width of the existing fork in the heel section
• Blade length of the existing fork (LGz )?
g fork extensions
ickness)?
??
(BK)?
Concl
VETTER QualityForkExtadvantages in safety tadvantages in safety, t
efficiency in
Do not ac
usion
tensions offer significanttime savings and moretime savings and moreapplication!
cept less!